TELDAT-TRAP-SNMP-MIB: View SNMP OID List / Download MIB

VENDOR: TELDAT, S.A.


 Home MIB: TELDAT-TRAP-SNMP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, TELDAT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snmpTrapsMIB 1.3.6.1.4.1.2007.1.4.21
This Module Information Base file is defined for managing received SNMP notifications generated by the SNMP event subsystem.
       snmpEventsGroup 1.3.6.1.4.1.2007.1.4.21.1
           snmpEventObjects1 1.3.6.1.4.1.2007.1.4.21.1.1
Event SNMP.1 This message is generated dor each SNMP packet received from a remote host.
               snmp1_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.1.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.1
           snmpEventObjects2 1.3.6.1.4.1.2007.1.4.21.1.2
Event SNMP.2 This message is generated for each SNMP packet sent to a remote host.
               snmp2_destination_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.2.1 ipaddress no-access
Parameter 'destination_snmp_address' in event SNMP.2
           snmpEventObjects3 1.3.6.1.4.1.2007.1.4.21.1.3
Event SNMP.3 This message is generated by a first-level reasonableness check of an incomming SNMP packet. The error codes have the following meanings: 1 - packet does not begin with SEQUENCE (0x30) 2 - packet sequence length too small 3 - packet sequence length improperly encoded (in one byte) 4 - first packet field not an ASN.1 INTEGER 5 - packet sequence length improperly encoded (in two bytes) 6 - first packet field not an ASN.1 INTEGER 7 - some other error was detected
               snmp3_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.3.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.3
               snmp3_error_code 1.3.6.1.4.1.2007.1.4.21.1.3.2 integer32 no-access
Parameter 'error_code' in event SNMP.3
           snmpEventObjects4 1.3.6.1.4.1.2007.1.4.21.1.4
Event SNMP.4 This message indicates that an SNMP packet contained an incorrect version.
               snmp4_version_number 1.3.6.1.4.1.2007.1.4.21.1.4.1 integer32 no-access
Parameter 'version_number' in event SNMP.4
               snmp4_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.4.2 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.4
           snmpEventObjects5 1.3.6.1.4.1.2007.1.4.21.1.5
Event SNMP.5 This message indicates that an SNMP request from a remote host specified a community which did not list that host's IP sddress as acceptable.
               snmp5_community 1.3.6.1.4.1.2007.1.4.21.1.5.1 displaystring no-access
Parameter 'community' in event SNMP.5
               snmp5_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.5.2 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.5
           snmpEventObjects6 1.3.6.1.4.1.2007.1.4.21.1.6
Event SNMP.6 This message indicates that an SNMP packet had a bad application type. That is, it was not a GET, GETNEXT, GETBULK or SET request.
               snmp6_appl_type 1.3.6.1.4.1.2007.1.4.21.1.6.1 integer32 no-access
Parameter 'appl_type' in event SNMP.6
               snmp6_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.6.2 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.6
           snmpEventObjects8 1.3.6.1.4.1.2007.1.4.21.1.8
Event SNMP.8 This message indicates that a SET request came in on a community or userName which only provides read-only access to the MIB.
               snmp8_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.8.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.8
               snmp8_userName 1.3.6.1.4.1.2007.1.4.21.1.8.2 displaystring no-access
Parameter 'userName' in event SNMP.8
           snmpEventObjects10 1.3.6.1.4.1.2007.1.4.21.1.10
Event SNMP.10 This message is generated by the SNMP fake-oute routine.
                 snmp10_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.10.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.10
           snmpEventObjects11 1.3.6.1.4.1.2007.1.4.21.1.11
Event SNMP.11 This message is generated by a length check on the variable to be sent out.
                 snmp11_ovarlen 1.3.6.1.4.1.2007.1.4.21.1.11.1 integer32 no-access
Parameter 'ovarlen' in event SNMP.11
                 snmp11_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.11.2 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.11
           snmpEventObjects12 1.3.6.1.4.1.2007.1.4.21.1.12
Event SNMP.12 This message is generated for each SNMP packet received from a remote host of the type get-request.
                 snmp12_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.12.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.12
           snmpEventObjects13 1.3.6.1.4.1.2007.1.4.21.1.13
Event SNMP.13 This message is generated for each SNMP packet received from a remote host of the type get-next.
                 snmp13_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.13.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.13
           snmpEventObjects14 1.3.6.1.4.1.2007.1.4.21.1.14
Event SNMP.14 This message is generated for each SNMP packet received from a remote host of the type set-request.
                 snmp14_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.14.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.14
           snmpEventObjects15 1.3.6.1.4.1.2007.1.4.21.1.15
Event SNMP.15 This message indicate that a packet was sent out with the error status as too big as a result of the SNMP variable in question not fitting the packet size.
                 snmp15_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.15.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.15
           snmpEventObjects16 1.3.6.1.4.1.2007.1.4.21.1.16
Event SNMP.16 This message indicate that a packet was sent out with the error status as noSuchName as a result of the SNMP variable in question not existing in the gateway or not in the view associated with the specified community or the operation is a set on a read-only variable.
                 snmp16_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.16.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.16
           snmpEventObjects17 1.3.6.1.4.1.2007.1.4.21.1.17
Event SNMP.17 This message indicate that a packet was sent out with the error status as badvalue as a result of trying to set a variable with a wrong value specified in the SET request.
                 snmp17_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.17.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.17
           snmpEventObjects22 1.3.6.1.4.1.2007.1.4.21.1.22
Event SNMP.22 One trap will not be sent because it could not be built for some reason.
                 snmp22_type 1.3.6.1.4.1.2007.1.4.21.1.22.1 integer32 no-access
Parameter 'type' in event SNMP.22
                 snmp22_subtype 1.3.6.1.4.1.2007.1.4.21.1.22.2 integer32 no-access
Parameter 'subtype' in event SNMP.22
                 snmp22_event 1.3.6.1.4.1.2007.1.4.21.1.22.3 displaystring no-access
Parameter 'event' in event SNMP.22
           snmpEventObjects23 1.3.6.1.4.1.2007.1.4.21.1.23
Event SNMP.23 One trap could not be built because its total length in ASN.1 is greater than the maximun value allowed.
                 snmp23_type 1.3.6.1.4.1.2007.1.4.21.1.23.1 integer32 no-access
Parameter 'type' in event SNMP.23
                 snmp23_subtype 1.3.6.1.4.1.2007.1.4.21.1.23.2 integer32 no-access
Parameter 'subtype' in event SNMP.23
                 snmp23_event 1.3.6.1.4.1.2007.1.4.21.1.23.3 displaystring no-access
Parameter 'event' in event SNMP.23
                 snmp23_length 1.3.6.1.4.1.2007.1.4.21.1.23.4 integer32 no-access
Parameter 'length' in event SNMP.23
                 snmp23_max_lengh 1.3.6.1.4.1.2007.1.4.21.1.23.5 integer32 no-access
Parameter 'max_lengh' in event SNMP.23
           snmpEventObjects24 1.3.6.1.4.1.2007.1.4.21.1.24
Event SNMP.24 One trap could not be built because the length in ASN.1 of one of its parameters (at least) is greater than the maximum value allowed.
                 snmp24_parameter_number 1.3.6.1.4.1.2007.1.4.21.1.24.1 integer32 no-access
Parameter 'parameter_number' in event SNMP.24
                 snmp24_length 1.3.6.1.4.1.2007.1.4.21.1.24.2 integer32 no-access
Parameter 'length' in event SNMP.24
                 snmp24_max_length 1.3.6.1.4.1.2007.1.4.21.1.24.3 integer32 no-access
Parameter 'max_length' in event SNMP.24
           snmpEventObjects25 1.3.6.1.4.1.2007.1.4.21.1.25
Event SNMP.25 One trap could not be built because the number of parameters is greater than the maximum allowed.
                 snmp25_max_parameters 1.3.6.1.4.1.2007.1.4.21.1.25.1 integer32 no-access
Parameter 'max_parameters' in event SNMP.25
           snmpEventObjects26 1.3.6.1.4.1.2007.1.4.21.1.26
Event SNMP.26 This message is generated for each OID included in a get-request, get-next-request, get-bulk or set-request PDU.
                 snmp26_operation 1.3.6.1.4.1.2007.1.4.21.1.26.1 displaystring no-access
Parameter 'operation' in event SNMP.26
                 snmp26_oid 1.3.6.1.4.1.2007.1.4.21.1.26.2 displaystring no-access
Parameter 'oid' in event SNMP.26
           snmpEventObjects27 1.3.6.1.4.1.2007.1.4.21.1.27
Event SNMP.27 An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated.
                 snmp27_secName 1.3.6.1.4.1.2007.1.4.21.1.27.1 displaystring no-access
Parameter 'secName' in event SNMP.27
                 snmp27_version 1.3.6.1.4.1.2007.1.4.21.1.27.2 integer32 no-access
Parameter 'version' in event SNMP.27
                 snmp27_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.27.3 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.27
           snmpEventObjects28 1.3.6.1.4.1.2007.1.4.21.1.28
Event SNMP.28 Generic informational event.
                 snmp28_string 1.3.6.1.4.1.2007.1.4.21.1.28.1 displaystring no-access
Parameter 'string' in event SNMP.28
           snmpEventObjects29 1.3.6.1.4.1.2007.1.4.21.1.29
Event SNMP.29 This message is generated for each SNMP packet received from a remote host of the type get-bulk.
                 snmp29_source_snmp_address 1.3.6.1.4.1.2007.1.4.21.1.29.1 ipaddress no-access
Parameter 'source_snmp_address' in event SNMP.29
       snmpNotifications 1.3.6.1.4.1.2007.1.4.21.2
           snmpNotificationsPrefix 1.3.6.1.4.1.2007.1.4.21.2.0
               snmpNotification1 1.3.6.1.4.1.2007.1.4.21.2.0.1
Notification of Event SNMP.1 Message: 'received packet from host $1' Parameters list: $1: snmp1_source_snmp_address This message is generated dor each SNMP packet received from a remote host.
               snmpNotification2 1.3.6.1.4.1.2007.1.4.21.2.0.2
Notification of Event SNMP.2 Message: 'sent packet to host $1' Parameters list: $1: snmp2_destination_snmp_address This message is generated for each SNMP packet sent to a remote host.
               snmpNotification3 1.3.6.1.4.1.2007.1.4.21.2.0.3
Notification of Event SNMP.3 Message: 'received bad SNMP pcket from host $1 (error code = $2)' Parameters list: $1: snmp3_source_snmp_address $2: snmp3_error_code This message is generated by a first-level reasonableness check of an incomming SNMP packet. The error codes have the following meanings: 1 - packet does not begin with SEQUENCE (0x30) 2 - packet sequence length too small 3 - packet sequence length improperly encoded (in one byte) 4 - first packet field not an ASN.1 INTEGER 5 - packet sequence length improperly encoded (in two bytes) 6 - first packet field not an ASN.1 INTEGER 7 - some other error was detected
               snmpNotification4 1.3.6.1.4.1.2007.1.4.21.2.0.4
Notification of Event SNMP.4 Message: 'bad version number $1 from host $2' Parameters list: $1: snmp4_version_number $2: snmp4_source_snmp_address This message indicates that an SNMP packet contained an incorrect version.
               snmpNotification5 1.3.6.1.4.1.2007.1.4.21.2.0.5
Notification of Event SNMP.5 Message: 'no access to community $1 from host $2' Parameters list: $1: snmp5_community $2: snmp5_source_snmp_address This message indicates that an SNMP request from a remote host specified a community which did not list that host's IP sddress as acceptable.
               snmpNotification6 1.3.6.1.4.1.2007.1.4.21.2.0.6
Notification of Event SNMP.6 Message: 'bad application type $1 from host $2' Parameters list: $1: snmp6_appl_type $2: snmp6_source_snmp_address This message indicates that an SNMP packet had a bad application type. That is, it was not a GET, GETNEXT, GETBULK or SET request.
               snmpNotification7 1.3.6.1.4.1.2007.1.4.21.2.0.7
Notification of Event SNMP.7 Message: 'no free packet buffer available' This message is generated when SNMP cannot allocate a packet in which to construct an SNMP response.
               snmpNotification8 1.3.6.1.4.1.2007.1.4.21.2.0.8
Notification of Event SNMP.8 Message: 'SET request from host $1 has read-only access in userName $2' Parameters list: $1: snmp8_source_snmp_address $2: snmp8_userName This message indicates that a SET request came in on a community or userName which only provides read-only access to the MIB.
               snmpNotification9 1.3.6.1.4.1.2007.1.4.21.2.0.9
Notification of Event SNMP.9 Message: 'TRAP: no free packet buffer available' This message is generated whenever SNMP cannot send an event because it cannot allocate storage.
               snmpNotification10 1.3.6.1.4.1.2007.1.4.21.2.0.10
Notification of Event SNMP.10 Message: 'SNMP disabled packet discarded from host $1' Parameters list: $1: snmp10_source_snmp_address This message is generated by the SNMP fake-oute routine.
               snmpNotification11 1.3.6.1.4.1.2007.1.4.21.2.0.11
Notification of Event SNMP.11 Message: 'length of variable to be sent out exceeds max length $1 from host $2' Parameters list: $1: snmp11_ovarlen $2: snmp11_source_snmp_address This message is generated by a length check on the variable to be sent out.
               snmpNotification12 1.3.6.1.4.1.2007.1.4.21.2.0.12
Notification of Event SNMP.12 Message: 'received a get-request packet from host $1' Parameters list: $1: snmp12_source_snmp_address This message is generated for each SNMP packet received from a remote host of the type get-request.
               snmpNotification13 1.3.6.1.4.1.2007.1.4.21.2.0.13
Notification of Event SNMP.13 Message: 'received a get-next packet from host $1' Parameters list: $1: snmp13_source_snmp_address This message is generated for each SNMP packet received from a remote host of the type get-next.
               snmpNotification14 1.3.6.1.4.1.2007.1.4.21.2.0.14
Notification of Event SNMP.14 Message: 'received a set-request packet from host $1' Parameters list: $1: snmp14_source_snmp_address This message is generated for each SNMP packet received from a remote host of the type set-request.
               snmpNotification15 1.3.6.1.4.1.2007.1.4.21.2.0.15
Notification of Event SNMP.15 Message: 'packet from host $1 resulted in a pakt with error status: toobig' Parameters list: $1: snmp15_source_snmp_address This message indicate that a packet was sent out with the error status as too big as a result of the SNMP variable in question not fitting the packet size.
               snmpNotification16 1.3.6.1.4.1.2007.1.4.21.2.0.16
Notification of Event SNMP.16 Message: 'packet from host $1 resulted in a packet with error status: nosuchnam' Parameters list: $1: snmp16_source_snmp_address This message indicate that a packet was sent out with the error status as noSuchName as a result of the SNMP variable in question not existing in the gateway or not in the view associated with the specified community or the operation is a set on a read-only variable.
               snmpNotification17 1.3.6.1.4.1.2007.1.4.21.2.0.17
Notification of Event SNMP.17 Message: 'packet from host $1 resulted in a packet with error status: badvalue' Parameters list: $1: snmp17_source_snmp_address This message indicate that a packet was sent out with the error status as badvalue as a result of trying to set a variable with a wrong value specified in the SET request.
               snmpNotification18 1.3.6.1.4.1.2007.1.4.21.2.0.18
Notification of Event SNMP.18 Message: 'Snmp traps buffer full' Snmp traps buffer is full.
               snmpNotification19 1.3.6.1.4.1.2007.1.4.21.2.0.19
Notification of Event SNMP.19 Message: 'Previous trap not transmitted' It isn't allowed to allocate more memory if the previous trap wasn't transmitted successfully.
               snmpNotification20 1.3.6.1.4.1.2007.1.4.21.2.0.20
Notification of Event SNMP.20 Message: 'There are no parameters stored to be sent inside the trap' The trap is empty, without parameters.
               snmpNotification21 1.3.6.1.4.1.2007.1.4.21.2.0.21
Notification of Event SNMP.21 Message: 'No memory was allocated to store the value pointed by use' The trap is empty, without parameters.
               snmpNotification22 1.3.6.1.4.1.2007.1.4.21.2.0.22
Notification of Event SNMP.22 Message: 'Snmp trap type $1 subtype $2 $3 could not be built' Parameters list: $1: snmp22_type $2: snmp22_subtype $3: snmp22_event One trap will not be sent because it could not be built for some reason.
               snmpNotification23 1.3.6.1.4.1.2007.1.4.21.2.0.23
Notification of Event SNMP.23 Message: 'The lenght of the snmp trap type $1 subtype $2 $3 (in ASN.1) is greater than the maximum allowed (length: $4, max: $5)' Parameters list: $1: snmp23_type $2: snmp23_subtype $3: snmp23_event $4: snmp23_length $5: snmp23_max_lengh One trap could not be built because its total length in ASN.1 is greater than the maximun value allowed.
               snmpNotification24 1.3.6.1.4.1.2007.1.4.21.2.0.24
Notification of Event SNMP.24 Message: 'Parameter $1 in Snmp trap too long (length: $2, max: $3)' Parameters list: $1: snmp24_parameter_number $2: snmp24_length $3: snmp24_max_length One trap could not be built because the length in ASN.1 of one of its parameters (at least) is greater than the maximum value allowed.
               snmpNotification25 1.3.6.1.4.1.2007.1.4.21.2.0.25
Notification of Event SNMP.25 Message: 'Snmp trap has too many parameters (max: $1)' Parameters list: $1: snmp25_max_parameters One trap could not be built because the number of parameters is greater than the maximum allowed.
               snmpNotification26 1.3.6.1.4.1.2007.1.4.21.2.0.26
Notification of Event SNMP.26 Message: '$1: OID = $2' Parameters list: $1: snmp26_operation $2: snmp26_oid This message is generated for each OID included in a get-request, get-next-request, get-bulk or set-request PDU.
               snmpNotification27 1.3.6.1.4.1.2007.1.4.21.2.0.27
Notification of Event SNMP.27 Message: 'authentication failure for secName $1, version $2 from host $3' Parameters list: $1: snmp27_secName $2: snmp27_version $3: snmp27_source_snmp_address An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated.
               snmpNotification28 1.3.6.1.4.1.2007.1.4.21.2.0.28
Notification of Event SNMP.28 Message: '$1' Parameters list: $1: snmp28_string Generic informational event.
               snmpNotification29 1.3.6.1.4.1.2007.1.4.21.2.0.29
Notification of Event SNMP.29 Message: 'received a get-bulk packet from host $1' Parameters list: $1: snmp29_source_snmp_address This message is generated for each SNMP packet received from a remote host of the type get-bulk.