TELDAT-CFG-FastCFG-MIB: View SNMP OID List / Download MIB

VENDOR: TELDAT, S.A.


 Home MIB: TELDAT-CFG-FastCFG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, TELDAT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 teldatC3FastCfg 1.3.6.1.4.1.2007.4.54
       udafocfg 1.3.6.1.4.1.2007.4.54.1
           udafoTcpTable 1.3.6.1.4.1.2007.4.54.1.1 no-access
Profiles table for TCP connections.
               udafoTcpEntry 1.3.6.1.4.1.2007.4.54.1.1.1 no-access
Each register is a profile with its parameters.
                   udafoTcpIndex 1.3.6.1.4.1.2007.4.54.1.1.1.1 integer read-only
Table index and number of TCP profile.
                   udafoTcpCommand 1.3.6.1.4.1.2007.4.54.1.1.1.2 integer read-write
Command field to add or delete TCP profiles. (1) ok, if last operation was correct. (just in get process.) (2) add, (just in set process.) (3) delete, (just in set process) (4) error, if last operation was incorrect. (just in get process.) Enumeration: 'add': 2, 'error': 4, 'ok': 1, 'delete': 3.
                   udafoTcpName 1.3.6.1.4.1.2007.4.54.1.1.1.3 displaystring read-write
TCP profile name.(Up to 15 characters.) Default value: NULL
                   udafoTcpNri 1.3.6.1.4.1.2007.4.54.1.1.1.4 displaystring read-write
Called Net Address. (Up to 15 digits. X character is also valid.) Default value: XXXXXXXXXXXXXXX
                   udafoTcpMainRemAdd 1.3.6.1.4.1.2007.4.54.1.1.1.5 displaystring read-write
Ip address of the first remote host. (Up to 25 characters.) Default value: 0.0.0.0
                   udafoTcpMainRemPort 1.3.6.1.4.1.2007.4.54.1.1.1.6 integer read-write
Port of the first remote host. Range:(0..65535). Default value: 20002
                   udafoTcpMainRemTmout 1.3.6.1.4.1.2007.4.54.1.1.1.7 integer read-write
Time out reply of the first remote host. Units: seconds. Range: (0..100). Default value: 5
                   udafoTcpSecRemAdd 1.3.6.1.4.1.2007.4.54.1.1.1.8 displaystring read-write
Ip address of the second remote host.(Up to 25 characters.) Default value: 0.0.0.0
                   udafoTcpSecRemPort 1.3.6.1.4.1.2007.4.54.1.1.1.9 integer read-write
Port of the second remote host. Range: (0..65535). Default value: 20002
                   udafoTcpSecRemTmout 1.3.6.1.4.1.2007.4.54.1.1.1.10 integer read-write
Time out reply of the second remote host. Units: seconds. Range: (0..100). Default value: 5
                   udafoTcpThirdRemAdd 1.3.6.1.4.1.2007.4.54.1.1.1.11 displaystring read-write
Ip address of the third remote host.(Up to 25 characters.) Default value: 0.0.0.0
                   udafoTcpThirdRemPort 1.3.6.1.4.1.2007.4.54.1.1.1.12 integer read-write
Port of the third remote host. Range: (0..65535). Default value: 20002
                   udafoTcpThirdRemTmout 1.3.6.1.4.1.2007.4.54.1.1.1.13 integer read-write
Time out reply of the third remote host. Units: seconds. Range: (0..100). Default value: 5
                   udafoTcpSendAck 1.3.6.1.4.1.2007.4.54.1.1.1.14 integer read-write
Enable Send ACK to HOST. Default value: 1 (NO) Enumeration: 'yes': 2, 'no': 1.
           udafoTrmtpTable 1.3.6.1.4.1.2007.4.54.1.2 no-access
Profiles table for TRMTP connections.
               udafoTrmtpEntry 1.3.6.1.4.1.2007.4.54.1.2.1 no-access
Each register is a profile with its parameters.
                   udafoTrmtpIndex 1.3.6.1.4.1.2007.4.54.1.2.1.1 integer read-only
Table index and number of TRMTP profile.
                   udafoTrmtpCommmand 1.3.6.1.4.1.2007.4.54.1.2.1.2 integer read-write
Command field to add or delete TCP profiles. (1) ok, if last operation was correct. (just in get process.) (2) add, (just in set process.) (3) delete, (just in set process) (4) error, if last operation was incorrect. (just in get process.) Enumeration: 'crear': 2, 'borrar': 3, 'ok': 1, 'error': 4.
                   udafoTrmtpName 1.3.6.1.4.1.2007.4.54.1.2.1.3 displaystring read-write
TRMTP profile name. (Up to 15 characters.) Default value: NULL
                   udafoTrmtpNri 1.3.6.1.4.1.2007.4.54.1.2.1.4 displaystring read-write
Called Net Address. (Up to 15 digits. X character is also valid.) Default value: XXXXXXXXXXXXXXX
                   udafoTrmtpPrincIpAddr 1.3.6.1.4.1.2007.4.54.1.2.1.5 displaystring read-write
Ip address of the first remote host.(Up to 25 characters.) Default value: 0.0.0.0
                   udafoTrmtpPrincRemPort 1.3.6.1.4.1.2007.4.54.1.2.1.6 integer read-write
Port of the first remote host. Range: (0..65535) Default value: 20001
                   udafoTrmtpPrincN2 1.3.6.1.4.1.2007.4.54.1.2.1.7 integer read-write
Maximum number of retransmisions for the first remote host. Range: (0..65535) Default value: 3
                   udafoTrmtpPrincT1 1.3.6.1.4.1.2007.4.54.1.2.1.8 integer read-write
Acknowledge waiting time before retransmition for the first remote host. Units: seconds Range: (1..65535) Default value: 5
                   udafoTrmtpPrincT2 1.3.6.1.4.1.2007.4.54.1.2.1.9 integer read-write
Waiting time before getting out of an error state in the transmiter for the first remote host. Units: seconds Range (1..65535) Default value: 50
                   udafoTrmtpPrincT3 1.3.6.1.4.1.2007.4.54.1.2.1.10 integer read-write
Inactivity time before getting out of the DATA state in the transmiter for the first remote host. Units: seconds Range: (1..65535) Default value: 45
                   udafoTrmtpPrincT4 1.3.6.1.4.1.2007.4.54.1.2.1.11 integer read-write
Inactivity time (in seconds) before returning to OFF state in the receiver for the first remote host. Units: seconds Range: (1..65535) Default value: 100
                   udafoTrmtpSecIpAddr 1.3.6.1.4.1.2007.4.54.1.2.1.12 displaystring read-write
Ip address of the second remote host. Default value: 0.0.0.0
                   udafoTrmtpSecRemPort 1.3.6.1.4.1.2007.4.54.1.2.1.13 integer read-write
Port of the second remote host. Range: (0..65535) Default value: 20001
                   udafoTrmtpSecN2 1.3.6.1.4.1.2007.4.54.1.2.1.14 integer read-write
Maximum number of retransmisions for the second remote host. Range: (0..65535) Default value: 3
                   udafoTrmtpSecT1 1.3.6.1.4.1.2007.4.54.1.2.1.15 integer read-write
Acknowledge waiting time before retransmition for the second remote host. Units: seconds Range: (1..65535) Default value: 5
                   udafoTrmtpSecT2 1.3.6.1.4.1.2007.4.54.1.2.1.16 integer read-write
Waiting time before getting out of an error state in the transmiter for the second remote host. Units: seconds Range: (1..65535) Default value: 50
                   udafoTrmtpSecT3 1.3.6.1.4.1.2007.4.54.1.2.1.17 integer read-write
Inactivity time before getting out of the DATA state in the transmiter for the second remote host. Units: seconds Range: (0..65535) Default value: 45
                   udafoTrmtpSecT4 1.3.6.1.4.1.2007.4.54.1.2.1.18 integer read-write
Inactivity time before returning to OFF state in the receiver for the second remote host. Units: seconds Range: (1..65535) Default value: 100
                   udafoTrmtpThirdIpAddr 1.3.6.1.4.1.2007.4.54.1.2.1.19 displaystring read-write
Ip address of the third remote host. Default value: 0.0.0.0
                   udafoTrmtpThirdRemPort 1.3.6.1.4.1.2007.4.54.1.2.1.20 integer read-write
Port of the third remote host. Range: (0..65535) Default value: 20001
                   udafoTrmtpThirdN2 1.3.6.1.4.1.2007.4.54.1.2.1.21 integer read-write
Maximum number of retransmisions for the third remote host. Range: (0..65535) Default value: 3
                   udafoTrmtpThirdT1 1.3.6.1.4.1.2007.4.54.1.2.1.22 integer read-write
Ackknowledge waiting time before retransmition for the third remote host. Units: seconds Range: (1..65535) Default value: 5
                   udafoTrmtpThirdT2 1.3.6.1.4.1.2007.4.54.1.2.1.23 integer read-write
Waiting time before getting out of an error state in the transmiter for the third remote host. Units: seconds Range: (1..65535) Default value: 50
                   udafoTrmtpThirdT3 1.3.6.1.4.1.2007.4.54.1.2.1.24 integer read-write
Inactivity time before getting out of the DATA state in the transmiter for the third remote host. Units: seconds Range: (1..65535) Default value: 45
                   udafoTrmtpThirdT4 1.3.6.1.4.1.2007.4.54.1.2.1.25 integer read-write
Inactivity time before returning to OFF state in the receiver for the third remote host. Units: seconds Range: (1..65535) Default value: 100
           udafoIfcTable 1.3.6.1.4.1.2007.4.54.1.3 no-access
Table of parameters for udafo interfaces.
               udafoIfcEntry 1.3.6.1.4.1.2007.4.54.1.3.1 no-access
Each register contains the general parameters for each udafo interface. Maximum 4 interfaces.
                   udafoIfcIndex 1.3.6.1.4.1.2007.4.54.1.3.1.1 integer read-only
Table index and number of udafo interface.
                   udafoIfcSpeed 1.3.6.1.4.1.2007.4.54.1.3.1.2 integer read-write
Transmision speed. Units: bits per second. Range: (300..64000) Default value: 2400
                   udafoIfcProtocol 1.3.6.1.4.1.2007.4.54.1.3.1.3 integer read-write
Protocol for transmision. DOV(1), DAT(2), VISANET(3), TRANSPARENT(4), 7COMM(5), X28P(6). Enumeration: 'transp': 4, 'dat': 2, 'p7comm': 5, 'x28p': 6, 'dov': 1, 'visanet': 3.
                   udafoIfcTraMode 1.3.6.1.4.1.2007.4.54.1.3.1.4 integer read-write
Transmision mode: TCP(1), TRMTP(2), AUTO(3) Enumeration: 'auto': 3, 'trmtp': 2, 'tcp': 1.
                   udafoIfcLocIpAddr 1.3.6.1.4.1.2007.4.54.1.3.1.5 ipaddress read-write
Ip address of first remote host. Note: If trmtp mode is selected in this interface, ip address has no meaning,showing default value. In this situation the set command is disabled. Default value: 0.0.0.0
                   udafoIfcLocUdpPort 1.3.6.1.4.1.2007.4.54.1.3.1.6 integer read-write
Local Udp port. Note: If tcp mode is selected in this interface, Upd port has no meaning, showing default value. In this situation the set command is disabled. This parameter must be diferent for each interface. Range: (0..65535) Default value: 20001-20004 (2000X, where 'X' is interface number)
                   udafoIfcUnderlying 1.3.6.1.4.1.2007.4.54.1.3.1.7 integer read-write
The underlying of UDAFO can be WAN or UART Default value: UART Enumeration: 'uart': 1, 'wan': 2.
                   udafoIfcIdentifier 1.3.6.1.4.1.2007.4.54.1.3.1.8 integer read-write
The Terminal number. Default value: 1
                   udafoIfcSigIfcCtrl 1.3.6.1.4.1.2007.4.54.1.3.1.9 integer read-write
Enable serial line signal control (DTR). Default value: 1 (NO) Enumeration: 'yes': 2, 'no': 1.
                   udafoIfcResponTime 1.3.6.1.4.1.2007.4.54.1.3.1.10 integer read-write
Response Time. When send a message, wait time for response from HOST or POS. (Some protocols used only) Range: (2..600) Default value: 20
           udafoCnfgMisc 1.3.6.1.4.1.2007.4.54.1.4
               udafoMiscDisServ 1.3.6.1.4.1.2007.4.54.1.4.1 integer read-write
Disable UDAFO service. Default value: 1 (NO DISABLED) Enumeration: 'yes': 2, 'no': 1.
       udafomon 1.3.6.1.4.1.2007.4.54.2
           udafoTransaOkTable 1.3.6.1.4.1.2007.4.54.2.1 no-access
Table of the last successful transactions done with the datafono interface.
               udafoTransaOkEntry 1.3.6.1.4.1.2007.4.54.2.1.1 no-access
Each register represents a transaction, giving its type, Ip address, Nri, net, date and time.
                   udafoTransaOkIndex 1.3.6.1.4.1.2007.4.54.2.1.1.1 integer read-only
Table index and number of transaction.
                   udafoTransaOkType 1.3.6.1.4.1.2007.4.54.2.1.1.2 displaystring read-only
Type of transaction. authorization or purchase (0) repayment (1) repetition (2) enquiry (3) close (4) account_entity selection (5) operation details (6) account enquiry (8) movement enquiry (9) memory inicialization/setup (M) Unknown (U)
                   udafoTransaOkIpAddr 1.3.6.1.4.1.2007.4.54.2.1.1.3 ipaddress read-only
Host Ip address.
                   udafoTransaOkNri 1.3.6.1.4.1.2007.4.54.2.1.1.4 displaystring read-only
Called Net Address.
                   udafoTransaOkStartTime 1.3.6.1.4.1.2007.4.54.2.1.1.5 displaystring read-only
Start time of the operation.
                   udafoTransaOkEndTime 1.3.6.1.4.1.2007.4.54.2.1.1.6 displaystring read-only
End time of the operation.
                   udafoTransaOkDate 1.3.6.1.4.1.2007.4.54.2.1.1.7 displaystring read-only
Date of the transaction.
                   udafoTransaOkNet 1.3.6.1.4.1.2007.4.54.2.1.1.8 integer read-only
Number of net responsible for the transaction.
           udafoTransaWrongTable 1.3.6.1.4.1.2007.4.54.2.2 no-access
Table of the last wrong transactions done with the datafono interface.
               udafoTransaWrongEntry 1.3.6.1.4.1.2007.4.54.2.2.1 no-access
Each register represents a transaction, giving its type, Ip address, cause of failure, Nri, net, date and time.
                   udafoTransaWroIndex 1.3.6.1.4.1.2007.4.54.2.2.1.1 integer read-only
Table index and number of transaction.
                   udafoTransaWroType 1.3.6.1.4.1.2007.4.54.2.2.1.2 displaystring read-only
Type of transaction. authorization or purchase (0) repayment (1) repetition (2) enquiry (3) close (4) account_entity selection (5) operation details (6) account enquiry (8) movement enquiry (9) memory inicialization/setup (M) Unknown (U)
                   udafoTransaWroIpAddr 1.3.6.1.4.1.2007.4.54.2.2.1.3 ipaddress read-only
Host Ip address.
                   udafoTransaWroNri 1.3.6.1.4.1.2007.4.54.2.2.1.4 displaystring read-only
Called Net Address.
                   udafoTransaWroCause 1.3.6.1.4.1.2007.4.54.2.2.1.5 integer read-only
Cause of failure in connection: 1.- The NRI send by datafono doesnt match with any configured profile. 2.- Disconnection received from DEP 3.- EOT received from TPV: invalid operation for the datafono. 4.- Unable to establish IP connection with host. 5.- End of TRMP connection. 6.- End of TCP connection by HOST.
                   udafoTransaWroStartTime 1.3.6.1.4.1.2007.4.54.2.2.1.6 displaystring read-only
Start time of operation.
                   udafoTransaWroEndTime 1.3.6.1.4.1.2007.4.54.2.2.1.7 displaystring read-only
End time of operation.
                   udafoTransaWroDate 1.3.6.1.4.1.2007.4.54.2.2.1.8 displaystring read-only
Date of the transaction.
                   udafoTransaWroNet 1.3.6.1.4.1.2007.4.54.2.2.1.9 integer read-only
Number of net responsible for the transaction.
           udafoblockTable 1.3.6.1.4.1.2007.4.54.2.3 no-access
This table is a sequence of data blocks that contain the fornightly statistics.
               udafoblockEntry 1.3.6.1.4.1.2007.4.54.2.3.1 no-access
Each entry is a data block. The size of each block is 1025 bytes, except for the last, that would be less.
                   udafoblkIndex 1.3.6.1.4.1.2007.4.54.2.3.1.1 integer read-only
This is the index of the table.
                   udafoblkData 1.3.6.1.4.1.2007.4.54.2.3.1.2 octet string read-only
Block data. For the last block, the size of the data block would be less than 1024.
           udafoTransaOkDelete 1.3.6.1.4.1.2007.4.54.2.4 integer read-write
Command field to clear ALL statistics of this table. clear(1), (just in set process) ok(2), if last operation was correct (just in get process) error(3), if last operation was incorrect (just in get process) undefined(4), if no previous operation took place (just in get process) Enumeration: 'clear': 1, 'ok': 2, 'undefined': 4, 'error': 3.
           udafoTransaWrongDelete 1.3.6.1.4.1.2007.4.54.2.5 integer read-write
Command field to clear ALL statistics of this table. clear(1), (just in set process) ok(2), if last operation was correct (just in get process) error(3), if last operation was incorrect (just in get process) undefined(4), if no previous operation took place (just in get process) Enumeration: 'clear': 1, 'ok': 2, 'undefined': 4, 'error': 3.