Sentry4-MIB: View SNMP OID List / Download MIB

VENDOR: SERVER TECHNOLOGY INC.


 Home MIB: Sentry4-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 serverTech 1.3.6.1.4.1.1718
           sentry4 1.3.6.1.4.1.1718.4
This is the MIB module for the fourth generation of the Sentry product family. This includes the PRO1 and PRO2 series of Smart and Switched Cabinet Distribution Unit (CDU) and Power Distribution Unit (PDU) products.
               st4Objects 1.3.6.1.4.1.1718.4.1
                   st4System 1.3.6.1.4.1.1718.4.1.1
                       st4SystemConfig 1.3.6.1.4.1.1718.4.1.1.1
                           st4SystemProductName 1.3.6.1.4.1.1718.4.1.1.1.1 displaystring read-only
The product name.
                           st4SystemLocation 1.3.6.1.4.1.1718.4.1.1.1.2 displaystring read-write
The location of the system.
                           st4SystemFirmwareVersion 1.3.6.1.4.1.1718.4.1.1.1.3 displaystring read-only
The firmware version.
                           st4SystemFirmwareBuildInfo 1.3.6.1.4.1.1718.4.1.1.1.4 displaystring read-only
The firmware build information.
                           st4SystemNICSerialNumber 1.3.6.1.4.1.1718.4.1.1.1.5 displaystring read-only
The serial number of the network interface card.
                           st4SystemNICHardwareInfo 1.3.6.1.4.1.1718.4.1.1.1.6 displaystring read-only
Hardware information about the network interface card.
                           st4SystemProductSeries 1.3.6.1.4.1.1718.4.1.1.1.7 integer read-only
The product series. Enumeration: 'pro2': 1, 'pro1': 0.
                           st4SystemFeatures 1.3.6.1.4.1.1718.4.1.1.1.10 bits read-only
The key-activated features enabled in the system. Bits: 'reserved': 1, 'outletControlInhibit': 2, 'smartLoadShedding': 0.
                           st4SystemFeatureKey 1.3.6.1.4.1.1718.4.1.1.1.11 displaystring read-write
A valid feature key written to this object will enable a feature in the system. A valid feature key is in the form xxxx-xxxx-xxxx-xxxx. A read of this object returns an empty string.
                           st4SystemConfigModifiedCount 1.3.6.1.4.1.1718.4.1.1.1.20 integer32 read-only
The total number of times the system configuration has changed.
                           st4SystemUnitCount 1.3.6.1.4.1.1718.4.1.1.1.21 integer32 read-only
The number of units in the system.
                   st4Units 1.3.6.1.4.1.1718.4.1.2
                       st4UnitCommonConfig 1.3.6.1.4.1.1718.4.1.2.1
                       st4UnitConfigTable 1.3.6.1.4.1.1718.4.1.2.2 no-access
Unit configuration table.
                           st4UnitConfigEntry 1.3.6.1.4.1.1718.4.1.2.2.1 no-access
Configuration objects for a particular unit.
                               st4UnitIndex 1.3.6.1.4.1.1718.4.1.2.2.1.1 integer32 no-access
Unit index. A=1, B=2, C=3, D=4, E=5, F=6.
                               st4UnitID 1.3.6.1.4.1.1718.4.1.2.2.1.2 displaystring read-only
The internal ID of the unit. Format=A.
                               st4UnitName 1.3.6.1.4.1.1718.4.1.2.2.1.3 displaystring read-write
The name of the unit.
                               st4UnitProductSN 1.3.6.1.4.1.1718.4.1.2.2.1.4 displaystring read-only
The product serial number of the unit.
                               st4UnitModel 1.3.6.1.4.1.1718.4.1.2.2.1.5 displaystring read-only
The model of the unit.
                               st4UnitAssetTag 1.3.6.1.4.1.1718.4.1.2.2.1.6 displaystring read-write
The asset tag of the unit.
                               st4UnitType 1.3.6.1.4.1.1718.4.1.2.2.1.7 integer read-only
The type of the unit. Enumeration: 'controller': 2, 'linkPd': 1, 'masterPd': 0, 'emc': 3.
                               st4UnitCapabilities 1.3.6.1.4.1.1718.4.1.2.2.1.8 bits read-only
The capabilities of the unit. Bits: 'wye': 2, 'phase3': 1, 'dc': 0, 'delta': 3.
                               st4UnitProductMfrDate 1.3.6.1.4.1.1718.4.1.2.2.1.9 displaystring read-only
The product manufacture date in YYYY-MM-DD (ISO 8601 format).
                               st4UnitDisplayOrientation 1.3.6.1.4.1.1718.4.1.2.2.1.20 integer read-write
The orientation of all displays in the unit. Enumeration: 'auto': 2, 'inverted': 1, 'normal': 0.
                               st4UnitOutletSequenceOrder 1.3.6.1.4.1.1718.4.1.2.2.1.21 integer read-write
The sequencing order of all outlets in the unit. Enumeration: 'reversed': 1, 'normal': 0.
                               st4UnitInputCordCount 1.3.6.1.4.1.1718.4.1.2.2.1.30 integer32 read-only
The number of power input cords into the unit.
                               st4UnitTempSensorCount 1.3.6.1.4.1.1718.4.1.2.2.1.31 integer32 read-only
The number of external temperature sensors supported by the unit.
                               st4UnitHumidSensorCount 1.3.6.1.4.1.1718.4.1.2.2.1.32 integer32 read-only
The number of external humidity sensors supported by the unit.
                               st4UnitWaterSensorCount 1.3.6.1.4.1.1718.4.1.2.2.1.33 integer32 read-only
The number of external water sensors supported by the unit.
                               st4UnitCcSensorCount 1.3.6.1.4.1.1718.4.1.2.2.1.34 integer32 read-only
The number of external contact closure sensors supported by the unit.
                               st4UnitAdcSensorCount 1.3.6.1.4.1.1718.4.1.2.2.1.35 integer32 read-only
The number of analog-to-digital converter sensors supported by the unit.
                       st4UnitMonitorTable 1.3.6.1.4.1.1718.4.1.2.3 no-access
Unit monitor table.
                           st4UnitMonitorEntry 1.3.6.1.4.1.1718.4.1.2.3.1 no-access
Objects to monitor for a particular unit.
                               st4UnitStatus 1.3.6.1.4.1.1718.4.1.2.3.1.1 devicestatus read-only
The status of the unit.
                       st4UnitEventConfigTable 1.3.6.1.4.1.1718.4.1.2.4 no-access
Unit event configuration table.
                           st4UnitEventConfigEntry 1.3.6.1.4.1.1718.4.1.2.4.1 no-access
Event configuration objects for a particular unit.
                               st4UnitNotifications 1.3.6.1.4.1.1718.4.1.2.4.1.1 eventnotificationmethods read-write
The notification methods enabled for unit events.
                   st4InputCords 1.3.6.1.4.1.1718.4.1.3
                       st4InputCordCommonConfig 1.3.6.1.4.1.1718.4.1.3.1
                           st4InputCordActivePowerHysteresis 1.3.6.1.4.1.1718.4.1.3.1.1 integer32 read-write
The active power hysteresis of the input cord in Watts.
                           st4InputCordApparentPowerHysteresis 1.3.6.1.4.1.1718.4.1.3.1.2 integer32 read-write
The apparent power hysteresis of the input cord in Volt-Amps.
                           st4InputCordPowerFactorHysteresis 1.3.6.1.4.1.1718.4.1.3.1.3 integer32 read-write
The power factor hysteresis of the input cord in hundredths.
                           st4InputCordOutOfBalanceHysteresis 1.3.6.1.4.1.1718.4.1.3.1.4 integer32 read-write
The 3 phase out-of-balance hysteresis of the input cord in percent.
                       st4InputCordConfigTable 1.3.6.1.4.1.1718.4.1.3.2 no-access
Input cord configuration table.
                           st4InputCordConfigEntry 1.3.6.1.4.1.1718.4.1.3.2.1 no-access
Configuration objects for a particular input cord.
                               st4InputCordIndex 1.3.6.1.4.1.1718.4.1.3.2.1.1 integer32 no-access
Input cord index. A=1, B=2, C=3, D=4.
                               st4InputCordID 1.3.6.1.4.1.1718.4.1.3.2.1.2 displaystring read-only
The internal ID of the input cord. Format=AA.
                               st4InputCordName 1.3.6.1.4.1.1718.4.1.3.2.1.3 displaystring read-write
The name of the input cord.
                               st4InputCordInletType 1.3.6.1.4.1.1718.4.1.3.2.1.6 displaystring read-only
The type of plug on the input cord, or socket for the input cord.
                               st4InputCordNominalVoltage 1.3.6.1.4.1.1718.4.1.3.2.1.7 integer32 read-write
The user-configured nominal voltage of the input cord in tenth Volts.
                               st4InputCordNominalVoltageMin 1.3.6.1.4.1.1718.4.1.3.2.1.8 integer32 read-only
The factory-set minimum allowed for the user-configured nominal voltage of the input cord in Volts.
                               st4InputCordNominalVoltageMax 1.3.6.1.4.1.1718.4.1.3.2.1.9 integer32 read-only
The factory-set maximum allowed for the user-configured nominal voltage of the input cord in Volts.
                               st4InputCordCurrentCapacity 1.3.6.1.4.1.1718.4.1.3.2.1.10 integer32 read-write
The user-configured current capacity of the input cord in Amps.
                               st4InputCordCurrentCapacityMax 1.3.6.1.4.1.1718.4.1.3.2.1.11 integer32 read-only
The factory-set maximum allowed for the user-configured current capacity of the input cord in Amps.
                               st4InputCordPowerCapacity 1.3.6.1.4.1.1718.4.1.3.2.1.12 integer32 read-only
The power capacity of the input cord in Volt-Amps. For DC products, this is identical to power capacity in Watts.
                               st4InputCordNominalPowerFactor 1.3.6.1.4.1.1718.4.1.3.2.1.13 integer32 read-write
The user-configured estimated nominal power factor of the input cord in hundredths.
                               st4InputCordLineCount 1.3.6.1.4.1.1718.4.1.3.2.1.20 integer32 read-only
The number of current-carrying lines in the input cord.
                               st4InputCordPhaseCount 1.3.6.1.4.1.1718.4.1.3.2.1.21 integer32 read-only
The number of active phases from the lines in the input cord.
                               st4InputCordOcpCount 1.3.6.1.4.1.1718.4.1.3.2.1.22 integer32 read-only
The number of over-current protectors downstream from the input cord.
                               st4InputCordBranchCount 1.3.6.1.4.1.1718.4.1.3.2.1.23 integer32 read-only
The number of branches downstream from the input cord.
                               st4InputCordOutletCount 1.3.6.1.4.1.1718.4.1.3.2.1.24 integer32 read-only
The number of outlets powered from the input cord.
                       st4InputCordMonitorTable 1.3.6.1.4.1.1718.4.1.3.3 no-access
Input cord monitor table.
                           st4InputCordMonitorEntry 1.3.6.1.4.1.1718.4.1.3.3.1 no-access
Objects to monitor for a particular input cord.
                               st4InputCordState 1.3.6.1.4.1.1718.4.1.3.3.1.1 devicestate read-only
The on/off state of the input cord.
                               st4InputCordStatus 1.3.6.1.4.1.1718.4.1.3.3.1.2 devicestatus read-only
The status of the input cord.
                               st4InputCordActivePower 1.3.6.1.4.1.1718.4.1.3.3.1.3 integer32 read-only
The measured active power of the input cord in Watts.
                               st4InputCordActivePowerStatus 1.3.6.1.4.1.1718.4.1.3.3.1.4 devicestatus read-only
The status of the measured active power of the input cord.
                               st4InputCordApparentPower 1.3.6.1.4.1.1718.4.1.3.3.1.5 integer32 read-only
The measured apparent power of the input cord in Volt-Amps.
                               st4InputCordApparentPowerStatus 1.3.6.1.4.1.1718.4.1.3.3.1.6 devicestatus read-only
The status of the measured apparent power of the input cord.
                               st4InputCordPowerUtilized 1.3.6.1.4.1.1718.4.1.3.3.1.7 integer32 read-only
The amount of the input cord power capacity used in tenth percent. For AC products, this is the ratio of the apparent power to the power capacity. For DC products, this is the ratio of the active power to the power capacity.
                               st4InputCordPowerFactor 1.3.6.1.4.1.1718.4.1.3.3.1.8 integer32 read-only
The measured power factor of the input cord in hundredths.
                               st4InputCordPowerFactorStatus 1.3.6.1.4.1.1718.4.1.3.3.1.9 devicestatus read-only
The status of the measured power factor of the input cord.
                               st4InputCordEnergy 1.3.6.1.4.1.1718.4.1.3.3.1.10 integer32 read-only
The total energy consumption of loads through the input cord in tenth Kilowatt-Hours.
                               st4InputCordFrequency 1.3.6.1.4.1.1718.4.1.3.3.1.11 integer32 read-only
The frequency of the input cord voltage in tenth Hertz.
                               st4InputCordOutOfBalance 1.3.6.1.4.1.1718.4.1.3.3.1.12 integer32 read-only
The current imbalance on the lines of the input cord in tenth percent.
                               st4InputCordOutOfBalanceStatus 1.3.6.1.4.1.1718.4.1.3.3.1.13 devicestatus read-only
The status of the current imbalance on the lines of the input cord.
                       st4InputCordEventConfigTable 1.3.6.1.4.1.1718.4.1.3.4 no-access
Input cord event configuration table.
                           st4InputCordEventConfigEntry 1.3.6.1.4.1.1718.4.1.3.4.1 no-access
Event configuration objects for a particular input cord.
                               st4InputCordNotifications 1.3.6.1.4.1.1718.4.1.3.4.1.1 eventnotificationmethods read-write
The notification methods enabled for input cord events.
                               st4InputCordActivePowerLowAlarm 1.3.6.1.4.1.1718.4.1.3.4.1.2 integer32 read-write
The active power low alarm threshold of the input cord in Watts.
                               st4InputCordActivePowerLowWarning 1.3.6.1.4.1.1718.4.1.3.4.1.3 integer32 read-write
The active power low warning threshold of the input cord in Watts.
                               st4InputCordActivePowerHighWarning 1.3.6.1.4.1.1718.4.1.3.4.1.4 integer32 read-write
The active power high warning threshold of the input cord in Watts.
                               st4InputCordActivePowerHighAlarm 1.3.6.1.4.1.1718.4.1.3.4.1.5 integer32 read-write
The active power high alarm threshold of the input cord in Watts.
                               st4InputCordApparentPowerLowAlarm 1.3.6.1.4.1.1718.4.1.3.4.1.6 integer32 read-write
The apparent power low alarm threshold of the input cord in Volt-Amps.
                               st4InputCordApparentPowerLowWarning 1.3.6.1.4.1.1718.4.1.3.4.1.7 integer32 read-write
The apparent power low warning threshold of the input cord in Volt-Amps.
                               st4InputCordApparentPowerHighWarning 1.3.6.1.4.1.1718.4.1.3.4.1.8 integer32 read-write
The apparent power high warning threshold of the input cord in Volt-Amps.
                               st4InputCordApparentPowerHighAlarm 1.3.6.1.4.1.1718.4.1.3.4.1.9 integer32 read-write
The apparent power high alarm threshold of the input cord in Volt-Amps.
                               st4InputCordPowerFactorLowAlarm 1.3.6.1.4.1.1718.4.1.3.4.1.10 integer32 read-write
The power factor low alarm threshold of the input cord in hundredths.
                               st4InputCordPowerFactorLowWarning 1.3.6.1.4.1.1718.4.1.3.4.1.11 integer32 read-write
The power factor low warning threshold of the input cord in hundredths.
                               st4InputCordOutOfBalanceHighWarning 1.3.6.1.4.1.1718.4.1.3.4.1.12 integer32 read-write
The 3 phase out-of-balance high warning threshold of the input cord in percent.
                               st4InputCordOutOfBalanceHighAlarm 1.3.6.1.4.1.1718.4.1.3.4.1.13 integer32 read-write
The 3 phase out-of-balance high alarm threshold of the input cord in percent.
                   st4Lines 1.3.6.1.4.1.1718.4.1.4
                       st4LineCommonConfig 1.3.6.1.4.1.1718.4.1.4.1
                           st4LineCurrentHysteresis 1.3.6.1.4.1.1718.4.1.4.1.1 integer32 read-write
The current hysteresis of the line in tenth Amps.
                       st4LineConfigTable 1.3.6.1.4.1.1718.4.1.4.2 no-access
Line configuration table.
                           st4LineConfigEntry 1.3.6.1.4.1.1718.4.1.4.2.1 no-access
Configuration objects for a particular line.
                               st4LineIndex 1.3.6.1.4.1.1718.4.1.4.2.1.1 integer32 no-access
Line index. L1=1, L2=2, L3=3, N=4.
                               st4LineID 1.3.6.1.4.1.1718.4.1.4.2.1.2 displaystring read-only
The internal ID of the line. Format=AAN.
                               st4LineLabel 1.3.6.1.4.1.1718.4.1.4.2.1.4 displaystring read-only
The system label assigned to the line for identification.
                               st4LineCurrentCapacity 1.3.6.1.4.1.1718.4.1.4.2.1.6 integer32 read-only
The current capacity of the line in Amps.
                       st4LineMonitorTable 1.3.6.1.4.1.1718.4.1.4.3 no-access
Line monitor table.
                           st4LineMonitorEntry 1.3.6.1.4.1.1718.4.1.4.3.1 no-access
Objects to monitor for a particular line.
                               st4LineState 1.3.6.1.4.1.1718.4.1.4.3.1.1 devicestate read-only
The on/off state of the line.
                               st4LineStatus 1.3.6.1.4.1.1718.4.1.4.3.1.2 devicestatus read-only
The status of the line.
                               st4LineCurrent 1.3.6.1.4.1.1718.4.1.4.3.1.3 integer32 read-only
The measured current on the line in hundredth Amps.
                               st4LineCurrentStatus 1.3.6.1.4.1.1718.4.1.4.3.1.4 devicestatus read-only
The status of the measured current on the line.
                               st4LineCurrentUtilized 1.3.6.1.4.1.1718.4.1.4.3.1.5 integer32 read-only
The amount of the line current capacity used in tenth percent.
                       st4LineEventConfigTable 1.3.6.1.4.1.1718.4.1.4.4 no-access
Line event configuration table.
                           st4LineEventConfigEntry 1.3.6.1.4.1.1718.4.1.4.4.1 no-access
Event configuration objects for a particular line.
                               st4LineNotifications 1.3.6.1.4.1.1718.4.1.4.4.1.1 eventnotificationmethods read-write
The notification methods enabled for line events.
                               st4LineCurrentLowAlarm 1.3.6.1.4.1.1718.4.1.4.4.1.2 integer32 read-write
The current low alarm threshold of the line in tenth Amps.
                               st4LineCurrentLowWarning 1.3.6.1.4.1.1718.4.1.4.4.1.3 integer32 read-write
The current low warning threshold of the line in tenth Amps.
                               st4LineCurrentHighWarning 1.3.6.1.4.1.1718.4.1.4.4.1.4 integer32 read-write
The current high warning threshold of the line in tenth Amps.
                               st4LineCurrentHighAlarm 1.3.6.1.4.1.1718.4.1.4.4.1.5 integer32 read-write
The current high alarm threshold of the line in tenth Amps.
                   st4Phases 1.3.6.1.4.1.1718.4.1.5
                       st4PhaseCommonConfig 1.3.6.1.4.1.1718.4.1.5.1
                           st4PhaseVoltageHysteresis 1.3.6.1.4.1.1718.4.1.5.1.1 integer32 read-write
The voltage hysteresis of the phase in tenth Volts.
                           st4PhasePowerFactorHysteresis 1.3.6.1.4.1.1718.4.1.5.1.2 integer32 read-write
The power factor hysteresis of the phase in hundredths.
                       st4PhaseConfigTable 1.3.6.1.4.1.1718.4.1.5.2 no-access
Phase configuration table.
                           st4PhaseConfigEntry 1.3.6.1.4.1.1718.4.1.5.2.1 no-access
Configuration objects for a particular phase.
                               st4PhaseIndex 1.3.6.1.4.1.1718.4.1.5.2.1.1 integer32 no-access
Phase index. Three-phase AC Wye: L1-N=1, L2-N=2, L3-N=3; Three-phase AC Delta: L1-L2=1, L2-L3=2, L3-L1=3; Single Phase: L1-R=1; DC: L1-R=1; Three-phase AC Wye & Delta: L1-N=1, L2-N=2, L3-N=3, L1-L2=4, L2-L3=5; L3-L1=6.
                               st4PhaseID 1.3.6.1.4.1.1718.4.1.5.2.1.2 displaystring read-only
The internal ID of the phase. Format=AAN.
                               st4PhaseLabel 1.3.6.1.4.1.1718.4.1.5.2.1.4 displaystring read-only
The system label assigned to the phase for identification.
                               st4PhaseNominalVoltage 1.3.6.1.4.1.1718.4.1.5.2.1.6 integer32 read-only
The nominal voltage of the phase in tenth Volts.
                               st4PhaseBranchCount 1.3.6.1.4.1.1718.4.1.5.2.1.20 integer32 read-only
The number of branches downstream from the phase.
                               st4PhaseOutletCount 1.3.6.1.4.1.1718.4.1.5.2.1.21 integer32 read-only
The number of outlets powered from the phase.
                       st4PhaseMonitorTable 1.3.6.1.4.1.1718.4.1.5.3 no-access
Phase monitor table.
                           st4PhaseMonitorEntry 1.3.6.1.4.1.1718.4.1.5.3.1 no-access
Objects to monitor for a particular phase.
                               st4PhaseState 1.3.6.1.4.1.1718.4.1.5.3.1.1 devicestate read-only
The on/off state of the phase.
                               st4PhaseStatus 1.3.6.1.4.1.1718.4.1.5.3.1.2 devicestatus read-only
The status of the phase.
                               st4PhaseVoltage 1.3.6.1.4.1.1718.4.1.5.3.1.3 integer32 read-only
The measured voltage on the phase in tenth Volts.
                               st4PhaseVoltageStatus 1.3.6.1.4.1.1718.4.1.5.3.1.4 devicestatus read-only
The status of the measured voltage on the phase.
                               st4PhaseVoltageDeviation 1.3.6.1.4.1.1718.4.1.5.3.1.5 integer32 read-only
The deviation from the nominal voltage on the phase in tenth percent.
                               st4PhaseCurrent 1.3.6.1.4.1.1718.4.1.5.3.1.6 integer32 read-only
The measured current on the phase in hundredth Amps.
                               st4PhaseCurrentCrestFactor 1.3.6.1.4.1.1718.4.1.5.3.1.7 integer32 read-only
The measured crest factor of the current waveform on the phase in tenths.
                               st4PhaseActivePower 1.3.6.1.4.1.1718.4.1.5.3.1.8 integer32 read-only
The measured active power on the phase in Watts.
                               st4PhaseApparentPower 1.3.6.1.4.1.1718.4.1.5.3.1.9 integer32 read-only
The measured apparent power on the phase in Volt-Amps.
                               st4PhasePowerFactor 1.3.6.1.4.1.1718.4.1.5.3.1.10 integer32 read-only
The measured power factor on the phase in hundredths.
                               st4PhasePowerFactorStatus 1.3.6.1.4.1.1718.4.1.5.3.1.11 devicestatus read-only
The status of the measured power factor on the phase.
                               st4PhaseReactance 1.3.6.1.4.1.1718.4.1.5.3.1.12 integer read-only
The status of the measured reactance of the phase. Enumeration: 'unknown': 0, 'resistive': 3, 'inductive': 2, 'capacitive': 1.
                               st4PhaseEnergy 1.3.6.1.4.1.1718.4.1.5.3.1.13 integer32 read-only
The total energy consumption of loads through the phase in tenth Kilowatt-Hours.
                       st4PhaseEventConfigTable 1.3.6.1.4.1.1718.4.1.5.4 no-access
Phase event configuration table.
                           st4PhaseEventConfigEntry 1.3.6.1.4.1.1718.4.1.5.4.1 no-access
Event configuration objects for a particular phase.
                               st4PhaseNotifications 1.3.6.1.4.1.1718.4.1.5.4.1.1 eventnotificationmethods read-write
The notification methods enabled for phase events.
                               st4PhaseVoltageLowAlarm 1.3.6.1.4.1.1718.4.1.5.4.1.2 integer32 read-write
The current low alarm threshold of the phase in tenth Volts.
                               st4PhaseVoltageLowWarning 1.3.6.1.4.1.1718.4.1.5.4.1.3 integer32 read-write
The current low warning threshold of the phase in tenth Volts.
                               st4PhaseVoltageHighWarning 1.3.6.1.4.1.1718.4.1.5.4.1.4 integer32 read-write
The current high warning threshold of the phase in tenth Volts.
                               st4PhaseVoltageHighAlarm 1.3.6.1.4.1.1718.4.1.5.4.1.5 integer32 read-write
The current high alarm threshold of the phase in tenth Volts.
                               st4PhasePowerFactorLowAlarm 1.3.6.1.4.1.1718.4.1.5.4.1.6 integer32 read-write
The low power factor alarm threshold of the phase in hundredths.
                               st4PhasePowerFactorLowWarning 1.3.6.1.4.1.1718.4.1.5.4.1.7 integer32 read-write
The low power factor warning threshold of the phase in hundredths.
                   st4OverCurrentProtectors 1.3.6.1.4.1.1718.4.1.6
                       st4OcpCommonConfig 1.3.6.1.4.1.1718.4.1.6.1
                       st4OcpConfigTable 1.3.6.1.4.1.1718.4.1.6.2 no-access
Over-current protector configuration table.
                           st4OcpConfigEntry 1.3.6.1.4.1.1718.4.1.6.2.1 no-access
Configuration objects for a particular over-current protector.
                               st4OcpIndex 1.3.6.1.4.1.1718.4.1.6.2.1.1 integer32 no-access
Over-current protector index.
                               st4OcpID 1.3.6.1.4.1.1718.4.1.6.2.1.2 displaystring read-only
The internal ID of the over-current protector. Format=AAN[N].
                               st4OcpLabel 1.3.6.1.4.1.1718.4.1.6.2.1.4 displaystring read-only
The system label assigned to the over-current protector for identification.
                               st4OcpType 1.3.6.1.4.1.1718.4.1.6.2.1.6 integer read-only
The type of over-current protector. Enumeration: 'fuse': 0, 'breaker': 1.
                               st4OcpCurrentCapacity 1.3.6.1.4.1.1718.4.1.6.2.1.7 integer32 read-write
The user-configured current capacity of the over-current protector in Amps.
                               st4OcpCurrentCapacityMax 1.3.6.1.4.1.1718.4.1.6.2.1.8 integer32 read-only
The factory-set maximum allowed for the user-configured current capacity of the over-current protector in Amps.
                               st4OcpBranchCount 1.3.6.1.4.1.1718.4.1.6.2.1.20 integer32 read-only
The number of branches downstream from the over-current protector.
                               st4OcpOutletCount 1.3.6.1.4.1.1718.4.1.6.2.1.21 integer32 read-only
The number of outlets powered from the over-current protector.
                       st4OcpMonitorTable 1.3.6.1.4.1.1718.4.1.6.3 no-access
Over-current protector monitor table.
                           st4OcpMonitorEntry 1.3.6.1.4.1.1718.4.1.6.3.1 no-access
Objects to monitor for a particular over-current protector.
                               st4OcpStatus 1.3.6.1.4.1.1718.4.1.6.3.1.1 devicestatus read-only
The status of the over-current protector.
                       st4OcpEventConfigTable 1.3.6.1.4.1.1718.4.1.6.4 no-access
Over-current protector event configuration table.
                           st4OcpEventConfigEntry 1.3.6.1.4.1.1718.4.1.6.4.1 no-access
Event configuration objects for a particular over-current protector.
                               st4OcpNotifications 1.3.6.1.4.1.1718.4.1.6.4.1.1 eventnotificationmethods read-write
The notification methods enabled for over-current protector events.
                   st4Branches 1.3.6.1.4.1.1718.4.1.7
                       st4BranchCommonConfig 1.3.6.1.4.1.1718.4.1.7.1
                           st4BranchCurrentHysteresis 1.3.6.1.4.1.1718.4.1.7.1.1 integer32 read-write
The current hysteresis of the branch in tenth Amps.
                       st4BranchConfigTable 1.3.6.1.4.1.1718.4.1.7.2 no-access
Branch configuration table.
                           st4BranchConfigEntry 1.3.6.1.4.1.1718.4.1.7.2.1 no-access
Configuration objects for a particular branch.
                               st4BranchIndex 1.3.6.1.4.1.1718.4.1.7.2.1.1 integer32 no-access
Branch index.
                               st4BranchID 1.3.6.1.4.1.1718.4.1.7.2.1.2 displaystring read-only
The internal ID of the branch. Format=AAN[N].
                               st4BranchLabel 1.3.6.1.4.1.1718.4.1.7.2.1.4 displaystring read-only
The system label assigned to the branch for identification.
                               st4BranchCurrentCapacity 1.3.6.1.4.1.1718.4.1.7.2.1.6 integer32 read-only
The current capacity of the branch in Amps.
                               st4BranchPhaseID 1.3.6.1.4.1.1718.4.1.7.2.1.20 displaystring read-only
The internal ID of the phase powering this branch. Format=AAN.
                               st4BranchOcpID 1.3.6.1.4.1.1718.4.1.7.2.1.21 displaystring read-only
The internal ID of the over-current protector powering this outlet. Format=AAN[N].
                               st4BranchOutletCount 1.3.6.1.4.1.1718.4.1.7.2.1.30 integer32 read-only
The number of outlets powered from the branch.
                       st4BranchMonitorTable 1.3.6.1.4.1.1718.4.1.7.3 no-access
Branch monitor table.
                           st4BranchMonitorEntry 1.3.6.1.4.1.1718.4.1.7.3.1 no-access
Objects to monitor for a particular branch.
                               st4BranchState 1.3.6.1.4.1.1718.4.1.7.3.1.1 devicestate read-only
The on/off state of the branch.
                               st4BranchStatus 1.3.6.1.4.1.1718.4.1.7.3.1.2 devicestatus read-only
The status of the branch.
                               st4BranchCurrent 1.3.6.1.4.1.1718.4.1.7.3.1.3 integer32 read-only
The measured current on the branch in hundredth Amps.
                               st4BranchCurrentStatus 1.3.6.1.4.1.1718.4.1.7.3.1.4 devicestatus read-only
The status of the measured current on the branch.
                               st4BranchCurrentUtilized 1.3.6.1.4.1.1718.4.1.7.3.1.5 integer32 read-only
The amount of the branch current capacity used in tenth percent.
                       st4BranchEventConfigTable 1.3.6.1.4.1.1718.4.1.7.4 no-access
Branch event configuration table.
                           st4BranchEventConfigEntry 1.3.6.1.4.1.1718.4.1.7.4.1 no-access
Event configuration objects for a particular branch.
                               st4BranchNotifications 1.3.6.1.4.1.1718.4.1.7.4.1.1 eventnotificationmethods read-write
The notification methods enabled for branch events.
                               st4BranchCurrentLowAlarm 1.3.6.1.4.1.1718.4.1.7.4.1.2 integer32 read-write
The current low alarm threshold of the branch in tenth Amps.
                               st4BranchCurrentLowWarning 1.3.6.1.4.1.1718.4.1.7.4.1.3 integer32 read-write
The current low warning threshold of the branch in tenth Amps.
                               st4BranchCurrentHighWarning 1.3.6.1.4.1.1718.4.1.7.4.1.4 integer32 read-write
The current high warning threshold of the branch in tenth Amps.
                               st4BranchCurrentHighAlarm 1.3.6.1.4.1.1718.4.1.7.4.1.5 integer32 read-write
The current high alarm threshold of the branch in tenth Amps.
                   st4Outlets 1.3.6.1.4.1.1718.4.1.8
                       st4OutletCommonConfig 1.3.6.1.4.1.1718.4.1.8.1
                           st4OutletCurrentHysteresis 1.3.6.1.4.1.1718.4.1.8.1.1 integer32 read-write
The current hysteresis of the outlet in tenth Amps.
                           st4OutletActivePowerHysteresis 1.3.6.1.4.1.1718.4.1.8.1.2 integer32 read-write
The power hysteresis of the outlet in Watts.
                           st4OutletPowerFactorHysteresis 1.3.6.1.4.1.1718.4.1.8.1.3 integer32 read-write
The power factor hysteresis of the outlet in hundredths.
                           st4OutletSequenceInterval 1.3.6.1.4.1.1718.4.1.8.1.10 integer32 read-write
The power-on sequencing interval for all outlets in seconds.
                           st4OutletRebootDelay 1.3.6.1.4.1.1718.4.1.8.1.11 integer32 read-write
The reboot delay for all outlets in seconds.
                           st4OutletStateChangeLogging 1.3.6.1.4.1.1718.4.1.8.1.12 integer read-write
Enables or disables informational Outlet State Change event logging. Enumeration: 'disabled': 0, 'enabled': 1.
                       st4OutletConfigTable 1.3.6.1.4.1.1718.4.1.8.2 no-access
Outlet configuration table.
                           st4OutletConfigEntry 1.3.6.1.4.1.1718.4.1.8.2.1 no-access
Configuration objects for a particular outlet.
                               st4OutletIndex 1.3.6.1.4.1.1718.4.1.8.2.1.1 integer32 no-access
Outlet index.
                               st4OutletID 1.3.6.1.4.1.1718.4.1.8.2.1.2 displaystring read-only
The internal ID of the outlet. Format=AAN[N[N]].
                               st4OutletName 1.3.6.1.4.1.1718.4.1.8.2.1.3 displaystring read-write
The name of the outlet.
                               st4OutletCapabilities 1.3.6.1.4.1.1718.4.1.8.2.1.5 bits read-only
The capabilities of the outlet. Bits: 'pops': 1, 'switched': 0.
                               st4OutletSocketType 1.3.6.1.4.1.1718.4.1.8.2.1.6 displaystring read-only
The socket type of the outlet.
                               st4OutletCurrentCapacity 1.3.6.1.4.1.1718.4.1.8.2.1.7 integer32 read-only
The current capacity of the outlet in Amps.
                               st4OutletPowerCapacity 1.3.6.1.4.1.1718.4.1.8.2.1.8 integer32 read-only
The power capacity of the outlet in Volt-Amps. For DC products, this is identical to power capacity in Watts.
                               st4OutletWakeupState 1.3.6.1.4.1.1718.4.1.8.2.1.20 integer read-write
The wakeup state of the outlet. Enumeration: 'on': 0, 'off': 1, 'last': 2.
                               st4OutletPostOnDelay 1.3.6.1.4.1.1718.4.1.8.2.1.21 integer32 read-write
The post-on delay of the outlet in seconds.
                               st4OutletPhaseID 1.3.6.1.4.1.1718.4.1.8.2.1.30 displaystring read-only
The internal ID of the phase powering this outlet. Format=AAN.
                               st4OutletOcpID 1.3.6.1.4.1.1718.4.1.8.2.1.31 displaystring read-only
The internal ID of the over-current protector powering this outlet. Format=AAN[N].
                               st4OutletBranchID 1.3.6.1.4.1.1718.4.1.8.2.1.32 displaystring read-only
The internal ID of the branch powering this outlet. Format=AAN[N].
                       st4OutletMonitorTable 1.3.6.1.4.1.1718.4.1.8.3 no-access
Outlet monitor table.
                           st4OutletMonitorEntry 1.3.6.1.4.1.1718.4.1.8.3.1 no-access
Objects to monitor for a particular outlet.
                               st4OutletState 1.3.6.1.4.1.1718.4.1.8.3.1.1 devicestate read-only
The on/off state of the outlet.
                               st4OutletStatus 1.3.6.1.4.1.1718.4.1.8.3.1.2 devicestatus read-only
The status of the outlet.
                               st4OutletCurrent 1.3.6.1.4.1.1718.4.1.8.3.1.3 integer32 read-only
The measured current on the outlet in hundredth Amps.
                               st4OutletCurrentStatus 1.3.6.1.4.1.1718.4.1.8.3.1.4 devicestatus read-only
The status of the measured current on the outlet.
                               st4OutletCurrentUtilized 1.3.6.1.4.1.1718.4.1.8.3.1.5 integer32 read-only
The amount of the outlet current capacity used in tenth percent.
                               st4OutletVoltage 1.3.6.1.4.1.1718.4.1.8.3.1.6 integer32 read-only
The measured voltage of the outlet in tenth Volts.
                               st4OutletActivePower 1.3.6.1.4.1.1718.4.1.8.3.1.7 integer32 read-only
The measured active power of the outlet in Watts.
                               st4OutletActivePowerStatus 1.3.6.1.4.1.1718.4.1.8.3.1.8 devicestatus read-only
The status of the measured active power of the outlet.
                               st4OutletApparentPower 1.3.6.1.4.1.1718.4.1.8.3.1.9 integer32 read-only
The measured apparent power of the outlet in Volt-Amps.
                               st4OutletPowerFactor 1.3.6.1.4.1.1718.4.1.8.3.1.10 integer32 read-only
The measured power factor of the outlet in hundredths.
                               st4OutletPowerFactorStatus 1.3.6.1.4.1.1718.4.1.8.3.1.11 devicestatus read-only
The status of the measured power factor of the outlet.
                               st4OutletCurrentCrestFactor 1.3.6.1.4.1.1718.4.1.8.3.1.12 integer32 read-only
The measured crest factor of the outlet in tenths.
                               st4OutletReactance 1.3.6.1.4.1.1718.4.1.8.3.1.13 integer read-only
The status of the measured reactance of the outlet. Enumeration: 'unknown': 0, 'resistive': 3, 'inductive': 2, 'capacitive': 1.
                               st4OutletEnergy 1.3.6.1.4.1.1718.4.1.8.3.1.14 integer32 read-only
The total energy consumption of the device plugged into the outlet in Watt-Hours.
                       st4OutletEventConfigTable 1.3.6.1.4.1.1718.4.1.8.4 no-access
Outlet event configuration table.
                           st4OutletEventConfigEntry 1.3.6.1.4.1.1718.4.1.8.4.1 no-access
Event configuration objects for a particular outlet.
                               st4OutletNotifications 1.3.6.1.4.1.1718.4.1.8.4.1.1 eventnotificationmethods read-write
The notification methods enabled for outlet events.
                               st4OutletCurrentLowAlarm 1.3.6.1.4.1.1718.4.1.8.4.1.2 integer32 read-write
The current low alarm threshold of the outlet in tenth Amps.
                               st4OutletCurrentLowWarning 1.3.6.1.4.1.1718.4.1.8.4.1.3 integer32 read-write
The current low warning threshold of the outlet in tenth Amps.
                               st4OutletCurrentHighWarning 1.3.6.1.4.1.1718.4.1.8.4.1.4 integer32 read-write
The current high warning threshold of the outlet in tenth Amps.
                               st4OutletCurrentHighAlarm 1.3.6.1.4.1.1718.4.1.8.4.1.5 integer32 read-write
The current high alarm threshold of the outlet in tenth Amps.
                               st4OutletActivePowerLowAlarm 1.3.6.1.4.1.1718.4.1.8.4.1.6 integer32 read-write
The active power low alarm threshold of the outlet in Watts.
                               st4OutletActivePowerLowWarning 1.3.6.1.4.1.1718.4.1.8.4.1.7 integer32 read-write
The active power low warning threshold of the outlet in Watts.
                               st4OutletActivePowerHighWarning 1.3.6.1.4.1.1718.4.1.8.4.1.8 integer32 read-write
The active power high warning threshold of the outlet in Watts.
                               st4OutletActivePowerHighAlarm 1.3.6.1.4.1.1718.4.1.8.4.1.9 integer32 read-write
The active power high alarm threshold of the outlet in Watts.
                               st4OutletPowerFactorLowAlarm 1.3.6.1.4.1.1718.4.1.8.4.1.10 integer32 read-write
The low power factor alarm threshold of the outlet in hundredths.
                               st4OutletPowerFactorLowWarning 1.3.6.1.4.1.1718.4.1.8.4.1.11 integer32 read-write
The low power factor warning threshold of the outlet in hundredths.
                       st4OutletControlTable 1.3.6.1.4.1.1718.4.1.8.5 no-access
Outlet control table.
                           st4OutletControlEntry 1.3.6.1.4.1.1718.4.1.8.5.1 no-access
Objects for control of a particular outlet.
                               st4OutletControlState 1.3.6.1.4.1.1718.4.1.8.5.1.1 integer read-only
The control state of the outlet. Enumeration: 'shutdown': 13, 'ocpOff': 6, 'idleOff': 2, 'off': 10, 'pendOn': 8, 'on': 11, 'ocpOn': 7, 'pendOff': 9, 'eventShutdown': 19, 'reboot': 12, 'idleOn': 3, 'wakeOff': 4, 'eventReboot': 18, 'wakeOn': 5, 'fixedOn': 1, 'eventOff': 16, 'lockedOff': 14, 'notSet': 0, 'eventOn': 17, 'lockedOn': 15.
                               st4OutletControlAction 1.3.6.1.4.1.1718.4.1.8.5.1.2 integer read-write
An action to change the control state of the outlet, or to queue an action. Enumeration: 'on': 1, 'none': 0, 'off': 2, 'queueOff': 5, 'reboot': 3, 'queueReboot': 6, 'queueOn': 4.
                       st4OutletCommonControl 1.3.6.1.4.1.1718.4.1.8.6
                           st4OutletQueueControl 1.3.6.1.4.1.1718.4.1.8.6.1 integer read-write
An action to clear or commit queued outlet control actions. A read of this object returns clear(0) if queue is empty, and commit(1) if the queue is not empty. Enumeration: 'commit': 1, 'clear': 0.
                   st4TemperatureSensors 1.3.6.1.4.1.1718.4.1.9
                       st4TempSensorCommonConfig 1.3.6.1.4.1.1718.4.1.9.1
                           st4TempSensorHysteresis 1.3.6.1.4.1.1718.4.1.9.1.1 integer32 read-write
The temperature hysteresis of the sensor in degrees, using the scale selected by st4TempSensorScale.
                           st4TempSensorScale 1.3.6.1.4.1.1718.4.1.9.1.10 integer read-write
The current scale used for all temperature values. Enumeration: 'fahrenheit': 1, 'celsius': 0.
                       st4TempSensorConfigTable 1.3.6.1.4.1.1718.4.1.9.2 no-access
Temperature sensor configuration table.
                           st4TempSensorConfigEntry 1.3.6.1.4.1.1718.4.1.9.2.1 no-access
Configuration objects for a particular temperature sensor.
                               st4TempSensorIndex 1.3.6.1.4.1.1718.4.1.9.2.1.1 integer32 no-access
Temperature sensor index.
                               st4TempSensorID 1.3.6.1.4.1.1718.4.1.9.2.1.2 displaystring read-only
The internal ID of the temperature sensor. Format=AN.
                               st4TempSensorName 1.3.6.1.4.1.1718.4.1.9.2.1.3 displaystring read-write
The name of the temperature sensor.
                               st4TempSensorValueMin 1.3.6.1.4.1.1718.4.1.9.2.1.4 integer32 read-only
The minimum temperature limit of the sensor in degrees, using the scale selected by st4TempSensorScale.
                               st4TempSensorValueMax 1.3.6.1.4.1.1718.4.1.9.2.1.5 integer32 read-only
The maximum temperature limit of the sensor in degrees, using the scale selected by st4TempSensorScale.
                       st4TempSensorMonitorTable 1.3.6.1.4.1.1718.4.1.9.3 no-access
Temperature sensor monitor table.
                           st4TempSensorMonitorEntry 1.3.6.1.4.1.1718.4.1.9.3.1 no-access
Objects to monitor for a particular temperature sensor.
                               st4TempSensorValue 1.3.6.1.4.1.1718.4.1.9.3.1.1 integer32 read-only
The measured temperature on the sensor in tenth degrees using the scale selected by st4TempSensorScale. -410 means the temperature reading is invalid.
                               st4TempSensorStatus 1.3.6.1.4.1.1718.4.1.9.3.1.2 devicestatus read-only
The status of the temperature sensor.
                       st4TempSensorEventConfigTable 1.3.6.1.4.1.1718.4.1.9.4 no-access
Temperature sensor event configuration table.
                           st4TempSensorEventConfigEntry 1.3.6.1.4.1.1718.4.1.9.4.1 no-access
Event configuration objects for a particular temperature sensor.
                               st4TempSensorNotifications 1.3.6.1.4.1.1718.4.1.9.4.1.1 eventnotificationmethods read-write
The notification methods enabled for temperature sensor events.
                               st4TempSensorLowAlarm 1.3.6.1.4.1.1718.4.1.9.4.1.2 integer32 read-write
The low alarm threshold of the temperature sensor in degrees.
                               st4TempSensorLowWarning 1.3.6.1.4.1.1718.4.1.9.4.1.3 integer32 read-write
The low warning threshold of the temperature sensor in degrees.
                               st4TempSensorHighWarning 1.3.6.1.4.1.1718.4.1.9.4.1.4 integer32 read-write
The high warning threshold of the temperature sensor in degrees.
                               st4TempSensorHighAlarm 1.3.6.1.4.1.1718.4.1.9.4.1.5 integer32 read-write
The high alarm threshold of the temperature sensor in degrees.
                   st4HumiditySensors 1.3.6.1.4.1.1718.4.1.10
                         st4HumidSensorCommonConfig 1.3.6.1.4.1.1718.4.1.10.1
                             st4HumidSensorHysteresis 1.3.6.1.4.1.1718.4.1.10.1.1 integer32 read-write
The humidity hysteresis of the sensor in percent relative humidity.
                         st4HumidSensorConfigTable 1.3.6.1.4.1.1718.4.1.10.2 no-access
Humidity sensor configuration table.
                             st4HumidSensorConfigEntry 1.3.6.1.4.1.1718.4.1.10.2.1 no-access
Configuration objects for a particular humidity sensor.
                                 st4HumidSensorIndex 1.3.6.1.4.1.1718.4.1.10.2.1.1 integer32 no-access
Humidity sensor index.
                                 st4HumidSensorID 1.3.6.1.4.1.1718.4.1.10.2.1.2 displaystring read-only
The internal ID of the humidity sensor. Format=AN.
                                 st4HumidSensorName 1.3.6.1.4.1.1718.4.1.10.2.1.3 displaystring read-write
The name of the humidity sensor.
                         st4HumidSensorMonitorTable 1.3.6.1.4.1.1718.4.1.10.3 no-access
Humidity sensor monitor table.
                             st4HumidSensorMonitorEntry 1.3.6.1.4.1.1718.4.1.10.3.1 no-access
Objects to monitor for a particular humidity sensor.
                                 st4HumidSensorValue 1.3.6.1.4.1.1718.4.1.10.3.1.1 integer32 read-only
The measured humidity on the sensor in percentage relative humidity.
                                 st4HumidSensorStatus 1.3.6.1.4.1.1718.4.1.10.3.1.2 devicestatus read-only
The status of the humidity sensor.
                         st4HumidSensorEventConfigTable 1.3.6.1.4.1.1718.4.1.10.4 no-access
Humidity sensor event configuration table.
                             st4HumidSensorEventConfigEntry 1.3.6.1.4.1.1718.4.1.10.4.1 no-access
Event configuration objects for a particular humidity sensor.
                                 st4HumidSensorNotifications 1.3.6.1.4.1.1718.4.1.10.4.1.1 eventnotificationmethods read-write
The notification methods enabled for humidity sensor events.
                                 st4HumidSensorLowAlarm 1.3.6.1.4.1.1718.4.1.10.4.1.2 integer32 read-write
The low alarm threshold of the humidity sensor in percentage relative humidity.
                                 st4HumidSensorLowWarning 1.3.6.1.4.1.1718.4.1.10.4.1.3 integer32 read-write
The low warning threshold of the humidity sensor in percentage relative humidity.
                                 st4HumidSensorHighWarning 1.3.6.1.4.1.1718.4.1.10.4.1.4 integer32 read-write
The high warning threshold of the humidity sensor in percentage relative humidity.
                                 st4HumidSensorHighAlarm 1.3.6.1.4.1.1718.4.1.10.4.1.5 integer32 read-write
The high alarm threshold of the humidity sensor in percentage relative humidity.
                   st4WaterSensors 1.3.6.1.4.1.1718.4.1.11
                         st4WaterSensorCommonConfig 1.3.6.1.4.1.1718.4.1.11.1
                         st4WaterSensorConfigTable 1.3.6.1.4.1.1718.4.1.11.2 no-access
Water sensor configuration table.
                             st4WaterSensorConfigEntry 1.3.6.1.4.1.1718.4.1.11.2.1 no-access
Configuration objects for a particular water sensor.
                                 st4WaterSensorIndex 1.3.6.1.4.1.1718.4.1.11.2.1.1 integer32 no-access
Water sensor index.
                                 st4WaterSensorID 1.3.6.1.4.1.1718.4.1.11.2.1.2 displaystring read-only
The internal ID of the water sensor. Format=AN.
                                 st4WaterSensorName 1.3.6.1.4.1.1718.4.1.11.2.1.3 displaystring read-write
The name of the water sensor.
                         st4WaterSensorMonitorTable 1.3.6.1.4.1.1718.4.1.11.3 no-access
Water sensor monitor table.
                             st4WaterSensorMonitorEntry 1.3.6.1.4.1.1718.4.1.11.3.1 no-access
Objects to monitor for a particular water sensor.
                                 st4WaterSensorStatus 1.3.6.1.4.1.1718.4.1.11.3.1.1 devicestatus read-only
The status of the water sensor.
                         st4WaterSensorEventConfigTable 1.3.6.1.4.1.1718.4.1.11.4 no-access
Water sensor event configuration table.
                             st4WaterSensorEventConfigEntry 1.3.6.1.4.1.1718.4.1.11.4.1 no-access
Event configuration objects for a particular water sensor.
                                 st4WaterSensorNotifications 1.3.6.1.4.1.1718.4.1.11.4.1.1 eventnotificationmethods read-write
The notification methods enabled for water sensor events.
                   st4ContactClosureSensors 1.3.6.1.4.1.1718.4.1.12
                         st4CcSensorCommonConfig 1.3.6.1.4.1.1718.4.1.12.1
                         st4CcSensorConfigTable 1.3.6.1.4.1.1718.4.1.12.2 no-access
Contact closure sensor configuration table.
                             st4CcSensorConfigEntry 1.3.6.1.4.1.1718.4.1.12.2.1 no-access
Configuration objects for a particular contact closure sensor.
                                 st4CcSensorIndex 1.3.6.1.4.1.1718.4.1.12.2.1.1 integer32 no-access
Contact closure sensor index.
                                 st4CcSensorID 1.3.6.1.4.1.1718.4.1.12.2.1.2 displaystring read-only
The internal ID of the contact closure sensor. Format=AN.
                                 st4CcSensorName 1.3.6.1.4.1.1718.4.1.12.2.1.3 displaystring read-write
The name of the contact closure sensor.
                         st4CcSensorMonitorTable 1.3.6.1.4.1.1718.4.1.12.3 no-access
Contact closure sensor monitor table.
                             st4CcSensorMonitorEntry 1.3.6.1.4.1.1718.4.1.12.3.1 no-access
Objects to monitor for a particular contact closure sensor.
                                 st4CcSensorStatus 1.3.6.1.4.1.1718.4.1.12.3.1.1 devicestatus read-only
The status of the contact closure.
                         st4CcSensorEventConfigTable 1.3.6.1.4.1.1718.4.1.12.4 no-access
Contact closure sensor event configuration table.
                             st4CcSensorEventConfigEntry 1.3.6.1.4.1.1718.4.1.12.4.1 no-access
Event configuration objects for a particular contact closure sensor.
                                 st4CcSensorNotifications 1.3.6.1.4.1.1718.4.1.12.4.1.1 eventnotificationmethods read-write
The notification methods enabled for contact closure sensor events.
                   st4AnalogToDigitalConvSensors 1.3.6.1.4.1.1718.4.1.13
                         st4AdcSensorCommonConfig 1.3.6.1.4.1.1718.4.1.13.1
                             st4AdcSensorHysteresis 1.3.6.1.4.1.1718.4.1.13.1.1 integer32 read-write
The 8-bit count hysteresis of the analog-to-digital converter sensor.
                         st4AdcSensorConfigTable 1.3.6.1.4.1.1718.4.1.13.2 no-access
Analog-to-digital converter sensor configuration table.
                             st4AdcSensorConfigEntry 1.3.6.1.4.1.1718.4.1.13.2.1 no-access
Configuration objects for a particular analog-to-digital converter sensor.
                                 st4AdcSensorIndex 1.3.6.1.4.1.1718.4.1.13.2.1.1 integer32 no-access
Analog-to-digital converter sensor index.
                                 st4AdcSensorID 1.3.6.1.4.1.1718.4.1.13.2.1.2 displaystring read-only
The internal ID of the analog-to-digital converter sensor. Format=AN.
                                 st4AdcSensorName 1.3.6.1.4.1.1718.4.1.13.2.1.3 displaystring read-write
The name of the analog-to-digital converter sensor.
                         st4AdcSensorMonitorTable 1.3.6.1.4.1.1718.4.1.13.3 no-access
Analog-to-digital converter sensor monitor table.
                             st4AdcSensorMonitorEntry 1.3.6.1.4.1.1718.4.1.13.3.1 no-access
Objects to monitor for a particular analog-to-digital converter sensor.
                                 st4AdcSensorValue 1.3.6.1.4.1.1718.4.1.13.3.1.1 integer32 read-only
The 8-bit value from the analog-to-digital converter sensor.
                                 st4AdcSensorStatus 1.3.6.1.4.1.1718.4.1.13.3.1.2 devicestatus read-only
The status of the analog-to-digital converter sensor.
                         st4AdcSensorEventConfigTable 1.3.6.1.4.1.1718.4.1.13.4 no-access
Analog-to-digital converter sensor event configuration table.
                             st4AdcSensorEventConfigEntry 1.3.6.1.4.1.1718.4.1.13.4.1 no-access
Event configuration objects for a particular analog-to-digital converter sensor.
                                 st4AdcSensorNotifications 1.3.6.1.4.1.1718.4.1.13.4.1.1 eventnotificationmethods read-write
The notification methods enabled for analog-to-digital converter sensor events.
                                 st4AdcSensorLowAlarm 1.3.6.1.4.1.1718.4.1.13.4.1.2 integer32 read-write
The 8-bit value for the low alarm threshold of the analog-to-digital converter sensor.
                                 st4AdcSensorLowWarning 1.3.6.1.4.1.1718.4.1.13.4.1.3 integer32 read-write
The 8-bit value for the low warning threshold of the analog-to-digital converter sensor.
                                 st4AdcSensorHighWarning 1.3.6.1.4.1.1718.4.1.13.4.1.4 integer32 read-write
The 8-bit value for the high warning threshold of the analog-to-digital converter sensor.
                                 st4AdcSensorHighAlarm 1.3.6.1.4.1.1718.4.1.13.4.1.5 integer32 read-write
The 8-bit value for the high alarm threshold of the analog-to-digital converter sensor.
                   st4EventInformation 1.3.6.1.4.1.1718.4.1.99
                         st4EventStatusText 1.3.6.1.4.1.1718.4.1.99.1 displaystring read-only
The text representation of the enumerated integer value of the most-relevant status or state object included in a trap. The value of this object is set only when sent with a trap. A read of this object will return a NULL string.
                         st4EventStatusCondition 1.3.6.1.4.1.1718.4.1.99.2 integer read-only
The condition of the enumerated integer value of the status object included in a trap. The value of this object is set only when sent with a trap. A read of this object will return zero. Enumeration: 'nonError': 0, 'error': 1.
               st4Notifications 1.3.6.1.4.1.1718.4.100
                       st4Events 1.3.6.1.4.1.1718.4.100.0
                           st4UnitStatusEvent 1.3.6.1.4.1.1718.4.100.0.1
Unit status event.
                           st4InputCordStatusEvent 1.3.6.1.4.1.1718.4.100.0.2
Input cord status event.
                           st4InputCordActivePowerEvent 1.3.6.1.4.1.1718.4.100.0.3
Input cord active power event.
                           st4InputCordApparentPowerEvent 1.3.6.1.4.1.1718.4.100.0.4
Input cord apparent power event.
                           st4InputCordPowerFactorEvent 1.3.6.1.4.1.1718.4.100.0.5
Input cord power factor event.
                           st4InputCordOutOfBalanceEvent 1.3.6.1.4.1.1718.4.100.0.6
Input cord out-of-balance event.
                           st4LineStatusEvent 1.3.6.1.4.1.1718.4.100.0.7
Line status event.
                           st4LineCurrentEvent 1.3.6.1.4.1.1718.4.100.0.8
Line current event.
                           st4PhaseStatusEvent 1.3.6.1.4.1.1718.4.100.0.9
Phase status event.
                           st4PhaseVoltageEvent 1.3.6.1.4.1.1718.4.100.0.10
Phase voltage event.
                           st4PhasePowerFactorEvent 1.3.6.1.4.1.1718.4.100.0.11
Phase voltage event.
                           st4OcpStatusEvent 1.3.6.1.4.1.1718.4.100.0.12
Over-current protector status event.
                           st4BranchStatusEvent 1.3.6.1.4.1.1718.4.100.0.13
Branch status event.
                           st4BranchCurrentEvent 1.3.6.1.4.1.1718.4.100.0.14
Branch current event.
                           st4OutletStatusEvent 1.3.6.1.4.1.1718.4.100.0.15
Outlet status event.
                           st4OutletStateChangeEvent 1.3.6.1.4.1.1718.4.100.0.16
Outlet state change event.
                           st4OutletCurrentEvent 1.3.6.1.4.1.1718.4.100.0.17
Outlet current event.
                           st4OutletActivePowerEvent 1.3.6.1.4.1.1718.4.100.0.18
Outlet active power event.
                           st4OutletPowerFactorEvent 1.3.6.1.4.1.1718.4.100.0.19
Outlet power factor event.
                           st4TempSensorEvent 1.3.6.1.4.1.1718.4.100.0.20
Temperature sensor event.
                           st4HumidSensorEvent 1.3.6.1.4.1.1718.4.100.0.21
Humidity sensor event.
                           st4WaterSensorStatusEvent 1.3.6.1.4.1.1718.4.100.0.22
Water sensor status event.
                           st4CcSensorStatusEvent 1.3.6.1.4.1.1718.4.100.0.23
Contact closure sensor status event.
                           st4AdcSensorEvent 1.3.6.1.4.1.1718.4.100.0.24
Analog-to-digital converter sensor event.
               st4Conformance 1.3.6.1.4.1.1718.4.200
                       st4Groups 1.3.6.1.4.1.1718.4.200.1
                           st4SystemObjectsGroup 1.3.6.1.4.1.1718.4.200.1.1
System objects group.
                           st4UnitObjectsGroup 1.3.6.1.4.1.1718.4.200.1.2
Unit objects group.
                           st4InputCordObjectsGroup 1.3.6.1.4.1.1718.4.200.1.3
Input cord objects group.
                           st4LineObjectsGroup 1.3.6.1.4.1.1718.4.200.1.4
Line objects group.
                           st4PhaseObjectsGroup 1.3.6.1.4.1.1718.4.200.1.5
Phase objects group.
                           st4OcpObjectsGroup 1.3.6.1.4.1.1718.4.200.1.6
Over-current protector objects group.
                           st4BranchObjectsGroup 1.3.6.1.4.1.1718.4.200.1.7
Branch objects group.
                           st4OutletObjectsGroup 1.3.6.1.4.1.1718.4.200.1.8
Outlet objects group.
                           st4TempSensorObjectsGroup 1.3.6.1.4.1.1718.4.200.1.9
Temperature sensor objects group.
                           st4HumidSensorObjectsGroup 1.3.6.1.4.1.1718.4.200.1.10
Humidity sensor objects group.
                           st4WaterSensorObjectsGroup 1.3.6.1.4.1.1718.4.200.1.11
Water sensor objects group.
                           st4CcSensorObjectsGroup 1.3.6.1.4.1.1718.4.200.1.12
Contact closure sensor objects group.
                           st4AdcSensorObjectsGroup 1.3.6.1.4.1.1718.4.200.1.13
Analog-to-digital converter sensor objects group.
                           st4EventInfoObjectsGroup 1.3.6.1.4.1.1718.4.200.1.99
Event information objects group.
                           st4EventNotificationsGroup 1.3.6.1.4.1.1718.4.200.1.100
Event notifications group.
                       st4Compliances 1.3.6.1.4.1.1718.4.200.2
                           st4ModuleCompliances 1.3.6.1.4.1.1718.4.200.2.1
The requirements for conformance to the Sentry4-MIB.