SYMMNTP: View SNMP OID List / Download MIB

VENDOR: SYMMETRICOM


 Home MIB: SYMMNTP
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SYMM-COMMON-SMI, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 symmNTP 1.3.6.1.4.1.9070.1.2.5.1.2
This is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration.
     ntpStatus 1.3.6.1.4.1.9070.1.2.5.1.2.1
         ntpCommonStatusTable 1.3.6.1.4.1.9070.1.2.5.1.2.1.1 no-access
The NTP status table. It provides status for the NTP server operation. There are 7 status parameters.
             ntpCommonStatusEntry 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1 no-access
An entry of the NTP status table. Table index is ifIndex (port and interface index).
                 ntpStatusIndex 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.1 integer32 no-access
Local index of the NTP common status table.
                 ntpStatusEnable 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.2 enablevalue read-only
The NTP enable status for the specified NTP port. It can be Enable (1) or Disable (2). When NTP is disabled at a port, it does not transmit or respond to NTP packets, and all alarms associated with NTP for this port are cleared.
                 ntpStatusMode 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.3 displaystring read-only
The NTP operational mode. It can act as server or client. Currently only the server mode is supported.
                 ntpStatusLeapStatus 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.4 displaystring read-only
The NTP leap second status. Possible values are : No warning, Leap insertion, Leap deletion, Not in sync.
                 ntpStatusStratumLevel 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.5 displaystring read-only
The stratum level of the reference for the NTP clock at the specified port. Its range is 1-4. Only stratum level 1(PRC/PRS) is supported.
                 ntpStatusRootDispersion 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.6 displaystring read-only
Root dispersion. Hardcoded to be 0.
                 ntpStatusPacketLoad 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.7 displaystring read-only
NTP packet response load. Its range is 1-100 in unit of %.
                 ntpStatusVersion 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.8 displaystring read-only
NTP protocol version. Only version 4 is supported.
     ntpConfig 1.3.6.1.4.1.9070.1.2.5.1.2.2
         ntpCommonConfigTable 1.3.6.1.4.1.9070.1.2.5.1.2.2.1 no-access
The NTP server configuration table.
             ntpCommonConfigEntry 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1 no-access
An entry of the NTP server configuration table. Table index is ifIndex (port and interface index).
                 ntpCommonIndex 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.1 integer32 no-access
Local index of the NTP common parameter configuration table.
                 ntpCommonState 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.2 enablevalue read-write
The NTP service enable state for the specified port. It can be Enable (1) or Disable (2). Default value is Enable. When NTP is disabled at a port, it does not transmit or respond to NTP packets, and all alarms associated with NTP for this port are cleared.
                 ntpCommonTTL 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.3 unsigned32 read-write
IP header time-to-live (TTL) field for the NTP packets. Range is 1-255. Default value is 64.
                 ntpCommonDSCP 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.4 enablevalue read-write
Differentiated service code point (DSCP) state for the specified NTP port. It can be either Enable (1) or Disable (2). Default value is Disable. If DSCP state is Enable, the QoS field will have a configured DSCP value.
                 ntpCommonDSCPValue 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.5 unsigned32 read-write
DSCP value for PTP packets leaving this port. Range is 0-63, and default value is 0.
                 ntpCommonVlanId 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.6 integer read-write
The VLAN ID associated with the NTP service at this port. Each port only supports one NTP VLAN.
                 ntpCommonServiceLoadAlarmThreshold 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.7 integer32 read-write
It shows percentage (%) of NTP service load alarm threshold
     ntpConformance 1.3.6.1.4.1.9070.1.2.5.1.2.3
This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module.
         ntpCompliances 1.3.6.1.4.1.9070.1.2.5.1.2.3.1
             ntpBasicCompliance 1.3.6.1.4.1.9070.1.2.5.1.2.3.1.1
The compliance statement for SNMP entities which have NTP packet service.
         ntpUocGroups 1.3.6.1.4.1.9070.1.2.5.1.2.3.2
             ntpStatusGroup 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.1
A collection of objects providing information applicable to NTP status group.
             ntpConfigGroup 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.2
A collection of objects providing information applicable to NTP configuration group.