SYMMGNSS: View SNMP OID List / Download MIB

VENDOR: SYMMETRICOM


 Home MIB: SYMMGNSS
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SYMM-COMMON-SMI, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 symmGNSS 1.3.6.1.4.1.9070.1.2.5.2.1
This is the Symmetricom common MIB for GNSS/GPS. This MIB has two main nodes: gnssStatus and gnssConfig. The gnssStatus node has a port status table, a satellite table, and a scalar for GNSS current position mode. The gnssConfig node has a configuration table, position setting table, and a present position table.
     gnssStatus 1.3.6.1.4.1.9070.1.2.5.2.1.1
         gnssPortStatusTable 1.3.6.1.4.1.9070.1.2.5.2.1.1.1 no-access
GNSS port status table. It contains port name and the current GNSS receiver mode for the specified port.
             gnssPortStatusEntry 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1 no-access
An entry of the GNSS port status table. Table index is ifIndex.
                 gnssPortStatusIndex 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.1 integer32 no-access
Local index of the GNSS port status table.
                 gnssPortStatusPortName 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.2 displaystring read-only
The name of the specified GNSS port. In TP5000 system there can be one or two GNSS ports. One of them is always called GPS, and the additional one (if present) is either called GPS or GNSS. A port called GNSS indicates that it may be non-GPS or a multi-mode GNSS receiver port.
                 gnssPortCurrentGNSS 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.3 yesvaluetype read-only
This value indicates whether the specified GNSS port is used. Its value is Yes (1) or No (2). If it is No, the port is considered absent in the system.
                 gnssPortCurrentPosMode 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.4 gnsscurpositionmode read-only
Current position mode of the GNSS receiver. It can be surveying (1), position hold (2), or manual (3)
         gnssSatTable 1.3.6.1.4.1.9070.1.2.5.2.1.1.2 no-access
GNSS satellite table. This table lists information about the satellites being tracked by the GNSS receiver.
             gnssSatEntry 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1 no-access
An entry of the GNSS satellite tracking table. Table index is local index gnssSatIndex.
                 gnssSatIndex 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.1 integer32 read-only
This is the local index of the table of the GNSS satellites GPS, GLONASS, Galileo being tracked.
                 gnssSatNum 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.2 integer read-only
GNSS satellite number. This is the identification number of the GNSS satellite being tracked. This information is obtained from the GNSS satellite ephemeris or almanac.
                 gnssSatSNR 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.3 integer read-only
Signal-to-Noise Ratio. This is the GNSS signal to noise ratio measured by the GNSS receiver.
                 gnssSatHealth 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.4 gnsshealthstatus read-only
GNSS satellite health state. It can be healthy (1) or unhealthy (2). This data is obtained from the GNSS receiver.
                 gnssSatAzimuth 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.5 integer read-only
GNSS satellite azimuthal angle clockwise from true north. Range of the azimuth is 0 to 360 degrees.
                 gnssSatElevation 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.6 integer read-only
GNSS satellite elevation angle relative to the horizon. Range of the elevation angle is 0 to 90 degrees.
                 gnssSatPortName 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.7 displaystring read-only
The gnss port name. This is defined in gnssConfigTable.
         gnssPresentPosTable 1.3.6.1.4.1.9070.1.2.5.2.1.1.3 no-access
Current position table. This table shows the position of the GNSS receiver antenna. In the automatic mode, the position is calculated by the GNSS receiver. In the manual mode, the position is the manually entered position in gnssPosSettingTable.
             gnssPresentPosEntry 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1 no-access
An entry of the current position table. Table index is the ifIndex.
                 gnssPresentPosIndex 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.1 integer32 no-access
Local index that corresponds to the ifIndex. For TP5K there are up to two GNSS port entries.
                 gnssPresentPosLat 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.2 displaystring read-only
Latitude of the GNSS receiver antenna position for the specified GNSS port. Its format is Ndd:mm:ss.ss or Sdd:mm:ss.ss.
                 gnssPresentPosLong 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.3 displaystring read-only
Longitude of the GNSS receiver antenna position for the specified GNSS port. Its format is Eddd:mm:ss.ss or Wddd:mm:ss.ss.
                 gnssPresentPosHeight 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.4 displaystring read-only
Altitude (height) in meters of the GNSS receiver antenna position for the specified GNSS port. Its format is +/-hhhh.h.
     gnssConfig 1.3.6.1.4.1.9070.1.2.5.2.1.2
         gnssConfigurationTable 1.3.6.1.4.1.9070.1.2.5.2.1.2.1 no-access
The GNSS configuration table.
             gnssConfigurationEntry 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1 no-access
An entry of the GNSS configuration table. Table index is ifIndex.
                 gnssConfigurationIndex 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.1 integer32 no-access
Local index of the GNSS port configuration table.
                 gnssConfigurationPortName 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.2 displaystring read-only
Name of the specified GNSS port. For TP5000 currently there are two names for a GNSS port: GPS or GNSS. Use the name on the equipment front panel.
                 gnssConfigurationTrackMode 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3 gnssreceivermode read-write
GNSS receiver mode. This depends on the GNSS receiver. For the VCOM receiver, there are four modes: beidou (1), gps (2), priorityBeidou (4), which is automatic with GPS priority, and priorityGps (5) which is automatic with Beidou priority. For Ublox receiver, gnssGPS(17),gnssGlonass(18),gnssGPSGlonass(19),gnssGalileo(20), gnssGPSGalileo(21),gnssGlonassGalileo(22),gnssGPSGlonassGalileo(23), gnssBeidou(24), gnssBeidouGPS(25), gnssBeidouGlonass(26), gnssBeidouGlonassGPS(27),gnssBeidouGalileo(28), gnssBeidouGalileoGPS(29), gnssBeidouGalileoGlonass(30), gnssBeidouGalileoGlonassGPS(31)
                 gnssConfigurationPosMode 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.4 gnsspositionmode read-write
GNSS receiver position survey mode. It can be either automatic (1) or manual (2). When the position survey mode is manual, the user must configure the position.
                 gnssConfigurationElevMask 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.5 integer32 read-write
GNSS elevation mask. The range is 5 to 45 degrees. This value is actually the lower limit of the elevation mask. The upper limit is 90 degrees. If the elevation mask is set to 5 degrees, the elevation coverage is from 5 to 90 degrees. If the elevation mask is set to 30 degrees, the elevation coverage is from 30 to 90 degrees.
                 gnssConfigurationCableDelay 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.6 integer32 read-write
GNSS antenna cable delay compensation in nanoseconds. Range is 0 to 999,999 nanoseconds. This value should be as close to the actual antenna cable delay as possible. Residual error will directly affect the time/phase accuracy.
                 gnssConfigurationLeapSeconds 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.7 integer32 read-write
Leapseconds used for GLONASS only satellite to set user-provided value. Range 20-255. This leapseconds not applicable for GPS port. Note: zero (0) indicates NotApplicable
         gnssPosSettingTable 1.3.6.1.4.1.9070.1.2.5.2.1.2.2 no-access
This table is used to manually set the GNSS receiver antenna position for the specified GNSS port.
             gnssPosSettingEntry 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1 no-access
An entry of the GNSS position setting table. Table index is ifIndex.
                 gnssPosSettingIndex 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.1 integer32 no-access
Local index that corresponds to the ifIndex. For TP5K there are up to two GNSS port entries.
                 gnssPosSettingLat 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.2 displaystring read-write
Manual setting for the latitude of the GNSS receiver antenna for the specified GNSS port.
                 gnssPosSettingLong 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.3 displaystring read-write
Manual setting for the longitude of the GNSS receiver antenna for the specified GNSS port.
                 gnssPosSettingHeight 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.4 displaystring read-write
Manual setting for the height of the GNSS receiver antenna for the specified GNSS port.
     gnssConformance 1.3.6.1.4.1.9070.1.2.5.2.1.3
This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module.
         gnssCompliances 1.3.6.1.4.1.9070.1.2.5.2.1.3.1
             gnssBasicCompliance 1.3.6.1.4.1.9070.1.2.5.2.1.3.1.1
The compliance statement for SNMP entities which have GNSS input.
         gnssUocGroups 1.3.6.1.4.1.9070.1.2.5.2.1.3.2
             gnssStatusGroup 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.1
A collection of objects providing information applicable to GNSS status group.
             gnssConfigGroup 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.2
A collection of objects providing information applicable to GNSS configuration group.
             gnssSVGroup 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.3
A collection of objects providing information applicable to GNSS satellite positions group.
             gnssConfigPosGroup 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.4
A collection of objects providing information applicable to GNSS position configuration group.
             gnssCurrentPosGroup 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.5
A collection of objects providing information applicable to GNSS current position group.