SYMME1T1: View SNMP OID List / Download MIB

VENDOR: SYMMETRICOM


 Home MIB: SYMME1T1
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SYMM-COMMON-SMI, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 symmE1T1 1.3.6.1.4.1.9070.1.2.5.2.2
This is the Symmetricom Common MIB for the configuration and status monitoring of E1/T1 ports in the system. It is one of the MIBs under the symmPhysicalSignal node. This MIB is organized into two main nodes: input and output. Each node is further has two tables, one for status and one for configuration.
     e1T1input 1.3.6.1.4.1.9070.1.2.5.2.2.1
         inputE1T1Status 1.3.6.1.4.1.9070.1.2.5.2.2.1.1
             e1T1InputStatusTable 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1 no-access
This table contains status information for each E1/T1 input port.
                 e1T1InputStatusEntry 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1 no-access
An entry of the e1T1InputStatusTable. Table index is ifIndex (port/interface index). Each entry has three parameters for the specified E1/T1 input port: 1. Port enable status (enable or disable) 2. Current value of the incoming SSM 3. Port status
                     e1T1InputStatusIndex 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.1 integer32 no-access
Local index of the E1/T1 input status table.
                     e1T1InputPQLCurValueV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.3 tp5000pqlvalue read-only
The current PQL value of the incoming SSM on this input port.
                     e1T1InputPortStatusV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.4 displaystring read-only
The port status of the specified input E1/T1 input port. Possible values are On (1) and Off (2). When the input port state is enabled, port status becomes on. When input port state is disabled, input port status is off.
         e1T1InputConfig 1.3.6.1.4.1.9070.1.2.5.2.2.1.2
             e1T1InputConfigTable 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1 no-access
Configuration Table for E1/T1 input ports
                 e1T1InputConfigEntry 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1 no-access
An entry of the E1/T1 input configuration table. Table index is ifIndex (port/interface). Each entry has the following configuration parameters for the selected input port: 1. Frame type 2. CRC enable state 3. SSM enable state 4. SSM bit position 5. Default PQL value that can be used to override the input SSM value 6. Zero suppression state
                     e1T1InputConfigIndex 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.1 integer32 no-access
Local index of the E1/T1 input configuration table.
                     e1T1InputFrameTypeV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2 inpute1t1frametype read-write
E1 or T1 input frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type is 2048 kHz
                     e1T1InputCRCStateV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3 enablevalue read-write
CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means the CRC in the SSM is not used.
                     e1T1InputSSMStateV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.4 enablevalue read-write
SSM enable state. It can be Enable (1) or Disable (2). Disabling the SSM means the incoming SSM is not used, and the forced (default) PQL value for this input port will be used during the reference selection. SSM is supported for only three frame types: EFS, CAS with CRC4, and CCA with CRC4. SSM should not be enabled for other frame types. If SSM is enabled for an input port, but the frame type does not support SSM or is not sending a valid SSM, then this input will be disqualified and the input PQL will be set to 'invalid.' The system will go into holdover no other qualified reference is available.
                     e1T1InputSSMBitV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.5 integer32 read-write
SSM Bit position. The value range is 4 to 8. This parameter is only used for frame types ESF, CCS, or CAS.
                     e1T1InputPQLValueV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.6 tp5000pqlvalue read-write
The user assigned PQL value for the specified input. This PQL value is used when the SSM state is disabled. The range for the user assigned PQL value is 1 to 9.
                     eT1InputZeroSupprV1 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7 onvaluetype read-write
The number indicates whether zero suppression (ZS) on the input port is enabled or disabled. Valid values are On (1) or Off (2).
     e1T1Output 1.3.6.1.4.1.9070.1.2.5.2.2.2
         e1T1OutputStatus 1.3.6.1.4.1.9070.1.2.5.2.2.2.1
             e1T1OutputStatusTable 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1 no-access
This table contains status information for each E1/T1 output port.
                 e1T1OutputStatusEntry 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1 no-access
An entry of the e1T1OutputStatusTable. Table index is ifIndex (port/interface index). Each entry has two parameters for the specified E1/T1 input port: 1. Port status 2. Outgoing SSM value
                     e1T1OutputStatusIndex 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.1 integer32 no-access
Local index of the E1/T1 output status table.
                     e1T1OutputPortStatusV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2 displaystring read-only
The port status of the specified E1/T1 output port. Possible values are On (1) and Off (2). 'On' means there is signal on the port. For E1/T1 output port it means the system is in normal tracking mode. 'Off' means there is no signal on the port. For E1/T1 output port it means the output is squelched during some clock states.
                     e1T1OutputPQLValueV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.3 tp5000pqlvalue read-only
The PQL value for the specified E1/T1 output port.
         e1T1OutputConfig 1.3.6.1.4.1.9070.1.2.5.2.2.2.2
             e1T1OutputConfigTable 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1 no-access
This table contains configuration information for each E1/T1 output port.
                 e1T1OutputConfigEntry 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1 no-access
An entry of the e1T1OutputConfigTable. Table index is ifIndex (port/interface index). Each entry has the configuration parameters for the specified E1/T1 output port: 1. Port enable state 2. Frame type 3. CRC enable state 4. SSM enable state 5. SSM bit position 6. Zero suppression on/off state 7. Output port cable length
                     e1T1OutputConfigIndex 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.1 integer32 no-access
Local index of the E1/T1 output configuration table.
                     e1T1OutputStateV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2 portstatetype read-write
E1/T1 output port enable state. Its value can be Enable (1) or Disable (2). Disabling an output port means no output is generated for that port.
                     e1T1OutputFrameTypeV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.3 outpute1t1frametype read-write
E1 or T1 output frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type is 2048 kHz.
                     e1T1OutputCRCStateV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.4 enablevalue read-write
CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means that no CRC is generated for the SSM.
                     e1T1OutputSSMStateV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.5 enablevalue read-write
SSM enable state. It can be Enable (1) or Disable (2). Disabling the output SSM means that no SSM is generated for the specified output port.
                     e1T1OutputSSMBitV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.6 integer32 read-write
SSM Bit position. The value range is 4 to 8. This parameter is only used for frame types ESF, CCS, or CAS.
                     e1T1OutputZeroSupprV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.7 onvaluetype read-write
The number indicates whether zero suppression (ZS) on the output port is enabled or disabled. Valid values are On (1) or Off (2).
                     e1T1OutputLengthV1 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8 integer32 read-write
Output cable length.
     e1T1Conformance 1.3.6.1.4.1.9070.1.2.5.2.2.3
This node contains conformance statement for the symmE1T1 MIB module.
         e1T1Compliances 1.3.6.1.4.1.9070.1.2.5.2.2.3.1
             e1T1BasicCompliance 1.3.6.1.4.1.9070.1.2.5.2.2.3.1.1
The compliance statement for SNMP entities which have E1/T1 input/output.
         e1T1UocGroups 1.3.6.1.4.1.9070.1.2.5.2.2.3.2
             e1T1InputStatusGroup 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.1
A collection of objects providing information applicable to E1/T1 input status group.
             e11T1InputConfigGroup 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.2
A collection of objects providing information applicable to E1/T1 input configuration group.
             e11T1OutputStatusGroup 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.3
A collection of objects providing information applicable to E1/T1 output status group.
             e11T1OutputConfigGroup 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.4
A collection of objects providing information applicable to E1/T1 output configuration group.