SWITCH-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.


 Home MIB: SWITCH-SYSTEM-MIB
Download as:   
SNMPv2-CONF, RAISECOM-BASE-MIB, IF-MIB, SNMPv2-SMI, SNMPv2-TC, SWITCH-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcSystem 1.3.6.1.4.1.8886.6.1.1
iscom switch system Enterprise MIB definition.
     rcSwitchInformation 1.3.6.1.4.1.8886.6.1.1.1
         rcSwitchRoseVersion 1.3.6.1.4.1.8886.6.1.1.1.1 octet string read-only
rose software version .
         rcSwitchHardwareVersion 1.3.6.1.4.1.8886.6.1.1.1.2 octet string read-only
rose hardware version .
         rcSwitchServiceInfo 1.3.6.1.4.1.8886.6.1.1.1.3 integer32 read-only
rose software service information version . every bit stand for one type of service and , '0' stand for service is up, '1' stand for not start Qos-- bit(0) Filter -- bit(1) Storm control -- bit(2) Authentication-- bit(3) IGMP Snooping-- bit(4) STP-- bit(5) RIP-- bit(6) OSPF-- bit(7) PIM-DM-- bit(8) PIM-SM-- bit(9) ....
         rcSwitchLastErrorCode 1.3.6.1.4.1.8886.6.1.1.1.4 integer32 read-only
This mib object stand for system last error code ,for system analysis 0 for no error 1 ...0x7fffffff for error code
         rcSwitchMaxPhysicalPortNum 1.3.6.1.4.1.8886.6.1.1.1.5 integer read-only
The physical port number which system supports.
         rcSwitchMaxAggregationPortNum 1.3.6.1.4.1.8886.6.1.1.1.6 integer read-only
The aggregation port number which system supports.
         rcSwitchMaxL3IpSubnetNum 1.3.6.1.4.1.8886.6.1.1.1.7 integer read-only
The layer 3 port number which system supports.
         rcSwitchMacTableCapability 1.3.6.1.4.1.8886.6.1.1.1.8 integer32 read-only
The capability of MAC table.
         rcSwitchMacAddress 1.3.6.1.4.1.8886.6.1.1.1.9 macaddress read-only
MAC address.
         rcSwitchVlanSpaceSize 1.3.6.1.4.1.8886.6.1.1.1.10 integer read-only
the number of vlans in a vlan
         rcSwitchPvidSpaceSize 1.3.6.1.4.1.8886.6.1.1.1.11 integer read-only
         rcSwitchDefaultVlan 1.3.6.1.4.1.8886.6.1.1.1.12 integer read-only
Default vlan
         rcSwitchBootstrapVersion 1.3.6.1.4.1.8886.6.1.1.1.13 octet string read-only
rose bootstrap version .
         rcSwitchSerialNumber 1.3.6.1.4.1.8886.6.1.1.1.14 octet string read-only
The serial number of the motherboard.
         rcSwitchFpgaVersion 1.3.6.1.4.1.8886.6.1.1.1.15 octet string read-only
rose fpga version.
         rcSwitchProductVersion 1.3.6.1.4.1.8886.6.1.1.1.16 octet string read-only
product version
         rcSwitchCmpAbName 1.3.6.1.4.1.8886.6.1.1.1.17 octet string read-only
manufacturer abbreviated name
         rcSwitchCmpFullName 1.3.6.1.4.1.8886.6.1.1.1.18 octet string read-only
manufacturer full name
         rcSwitchDeviceName 1.3.6.1.4.1.8886.6.1.1.1.19 octet string read-only
device name
         rcSwitchBackBoardVendorName 1.3.6.1.4.1.8886.6.1.1.1.20 octet string read-only
Backboard vendor name.
         rcSwitchBackBoardSerialNumber 1.3.6.1.4.1.8886.6.1.1.1.21 octet string read-only
Serial number of the backboard.
         rcSwitchBackBoardName 1.3.6.1.4.1.8886.6.1.1.1.22 octet string read-only
Backboard name.
         rcSwitchBackBoardVersion 1.3.6.1.4.1.8886.6.1.1.1.23 octet string read-only
Backboard version.
     rcSlotInformation 1.3.6.1.4.1.8886.6.1.1.2
         rcSlotNum 1.3.6.1.4.1.8886.6.1.1.2.1 integer read-only
Total number of slot
         rcSlotStateTable 1.3.6.1.4.1.8886.6.1.1.2.2 no-access
A table of slot .
             rcSlotStateEntry 1.3.6.1.4.1.8886.6.1.1.2.2.1 no-access
A list of slot.
                 rcSlotIndex 1.3.6.1.4.1.8886.6.1.1.2.2.1.1 integer no-access
slot index based 0
                 rcSlotPortStart 1.3.6.1.4.1.8886.6.1.1.2.2.1.2 integer read-only
the start number of port in this slot
                 rcSlotPortNum 1.3.6.1.4.1.8886.6.1.1.2.2.1.3 integer read-only
the number of ports in this slot
                 rcSlotType 1.3.6.1.4.1.8886.6.1.1.2.2.1.4 integer read-only
slot type Enumeration: 'tx-1000M': 2, 'fx-SigMode-100M': 5, 'inexistence': 0, 'fx-DulMode-100M': 4, 'tx-100M': 6, 'fx-DulMode-1000M': 1, 'px-1000M': 7, 'fx-SigMode-1000M': 3.
     rcSwitchConfig 1.3.6.1.4.1.8886.6.1.1.3
         rcMacAgingTime 1.3.6.1.4.1.8886.6.1.1.3.1 integer32 read-write
The value based 10 is the aging time for MAC address. Aging will be disable when aging time was (0)
         rcStormControlBcastEnable 1.3.6.1.4.1.8886.6.1.1.3.2 enablevar read-write
Set the Storm control for broadcast on the interface to enable(1) or disable(2).
         rcStormControlMcastEnable 1.3.6.1.4.1.8886.6.1.1.3.3 enablevar read-write
Set the Storm control for multicast on the interface to enable(1) or disable(2).
         rcStormControlDlfEnable 1.3.6.1.4.1.8886.6.1.1.3.4 enablevar read-write
Set the Storm control for DLF on the interface to enable(1) or disable(2).
         rcStormControlpps 1.3.6.1.4.1.8886.6.1.1.3.5 integer read-write
The limit number for storm control on the interface .
         rcStormControlbps 1.3.6.1.4.1.8886.6.1.1.3.6 integer read-write
The limit number for storm control on the interface .
         rcStormControlRatio 1.3.6.1.4.1.8886.6.1.1.3.7 integer read-write
storm control limit ratio
         rcStormControlBurst 1.3.6.1.4.1.8886.6.1.1.3.8 integer read-write
Set burst length when storm control open on the interface. .
         rcStpEnable 1.3.6.1.4.1.8886.6.1.1.3.9 enablevar read-write
The enabled/disabled status of STP for the bridge entity.
         rcSvlEnable 1.3.6.1.4.1.8886.6.1.1.3.10 enablevar read-write
share vlan mode enable or disable
         rcGarpEnable 1.3.6.1.4.1.8886.6.1.1.3.11 enablevar read-write
GARP enable or disable
         rcLacpEnable 1.3.6.1.4.1.8886.6.1.1.3.12 enablevar read-write
share vlan mode enable or disable
         rcVlanSpaceNum 1.3.6.1.4.1.8886.6.1.1.3.13 integer read-write
The system supports at most rcVlanSpaceSize vlans, so the vlan ID increases at rcVlanSpaceSize step over.
         rcPvidSpaceNum 1.3.6.1.4.1.8886.6.1.1.3.14 integer read-write
The system supports at most rcPvidSpaceSize vlans, so the vlan ID increases at rcPvidSpaceSize step over.
         rcLoopbackDetectInterval 1.3.6.1.4.1.8886.6.1.1.3.15 integer read-write
Interval of sending loopback-detect packet.
         rcArpAgingTime 1.3.6.1.4.1.8886.6.1.1.3.16 integer32 read-write
arp timeout
         rcBpduTransPorts 1.3.6.1.4.1.8886.6.1.1.3.17 portlist read-write
The ports translating BPDU packets.
         rcDot1xTransPorts 1.3.6.1.4.1.8886.6.1.1.3.18 portlist read-write
The ports translating Dot1x packets.
         rcLacpTransPorts 1.3.6.1.4.1.8886.6.1.1.3.19 portlist read-write
The ports translating Lacp packets.
         rcGarpTransPorts 1.3.6.1.4.1.8886.6.1.1.3.20 portlist read-write
The ports translating Garp packets.
         rcGmrpTransPorts 1.3.6.1.4.1.8886.6.1.1.3.21 portlist read-write
The ports translating Gmrp packets.
         rcGvrpTransPorts 1.3.6.1.4.1.8886.6.1.1.3.22 portlist read-write
The ports translating Gvrp packets.
         rcIpRouting 1.3.6.1.4.1.8886.6.1.1.3.23 integer read-write
start or stop system routing function . this is a commnd MIB variable . Enumeration: 'stopIpRouting': 2, 'startIpRouting': 1.
         rcStaticRouteDistance 1.3.6.1.4.1.8886.6.1.1.3.24 integer32 read-write
system static route distance value . this is a commnd MIB variable .
         rcFastRoute 1.3.6.1.4.1.8886.6.1.1.3.25 truthvalue read-write
true for fast route and false for normal route .
         rcDlfForwardingEnable 1.3.6.1.4.1.8886.6.1.1.3.26 enablevar read-write
whether forwarding DLF packets .
         rcLoopbackDetectVlan 1.3.6.1.4.1.8886.6.1.1.3.27 integer32 read-write
loopback-detection packet belongs to which VLAN.
         rcLoopbackDetectDestAddr 1.3.6.1.4.1.8886.6.1.1.3.28 macaddress read-write
destination MAC address of loopback-detection packet.
         rcMaxAllowedFrameLength 1.3.6.1.4.1.8886.6.1.1.3.29 integer read-write
the maximum packet size for the switch.
         rcSvlDefaultVlan 1.3.6.1.4.1.8886.6.1.1.3.30 integer32 read-write
default vlan which the mac address is also learned to.
         rcTelnetMaxSessions 1.3.6.1.4.1.8886.6.1.1.3.31 integer32 read-write
Max sessions device telnet server permits. '0' indicates that device won't permits any telnet connect.
         rcTelnetAcceptPorts 1.3.6.1.4.1.8886.6.1.1.3.32 portlist read-write
Ports that access telnet connect request to telnet server on device.
         rcVlanMacLearning 1.3.6.1.4.1.8886.6.1.1.3.33 vlanset read-write
Enable or disable source MAC address learning on VLAN.
         rcConsoleEnable 1.3.6.1.4.1.8886.6.1.1.3.34 enablevar read-write
Enable or disable console connect.
         rcStormControlOperpps 1.3.6.1.4.1.8886.6.1.1.3.35 integer read-only
The actual limit number for storm control on the interface .
         rcStormControlOperbps 1.3.6.1.4.1.8886.6.1.1.3.36 integer read-only
The actual limit number for storm control on the interface .
         rcOperMaxAllowedFrameLength 1.3.6.1.4.1.8886.6.1.1.3.37 integer read-only
The actual maximum packet size for the switch.
         rcTrapBindipEnable 1.3.6.1.4.1.8886.6.1.1.3.38 enablevar read-write
Enable or disable rapBindip.DEFVAL { disable }
     rcPortInfoConfig 1.3.6.1.4.1.8886.6.1.1.4
         rcPortTable 1.3.6.1.4.1.8886.6.1.1.4.1 no-access
A table of switch port and associated properties.
             rcPortEntry 1.3.6.1.4.1.8886.6.1.1.4.1.1 no-access
Table entry for switch port control and status information.
                 rcPortIndex 1.3.6.1.4.1.8886.6.1.1.4.1.1.1 integer32 read-only
An index based 1 that uniquely identifies a system interface.
                 rcPortType 1.3.6.1.4.1.8886.6.1.1.4.1.1.2 integer read-only
port type,same as slot type. Enumeration: 'tx-1000M': 2, 'fx-SigMode-100M': 5, 'inexistence': 0, 'fx-DulMode-100M': 4, 'tx-100M': 6, 'fx-DulMode-1000M': 1, 'px-1000M': 7, 'fx-SigMode-1000M': 3.
                 rcSlotTableIndex 1.3.6.1.4.1.8886.6.1.1.4.1.1.3 integer read-only
the index of slot which this port is in.
                 rcSlotPortIndex 1.3.6.1.4.1.8886.6.1.1.4.1.1.4 integer read-only
index of this port in the slot
                 rcPortAdminStatus 1.3.6.1.4.1.8886.6.1.1.4.1.1.5 integer read-write
The desired state of the interface. Enumeration: 'down': 2, 'up': 1.
                 rcPortOperStatus 1.3.6.1.4.1.8886.6.1.1.4.1.1.6 integer read-only
The current operational state of the interface. Enumeration: 'down': 2, 'up': 1.
                 rcPortDuplexSpeedSet 1.3.6.1.4.1.8886.6.1.1.4.1.1.7 integer read-write
The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the default of autonegotiate(1), then the application initializes the port to a valid value (e.g., 1000full(6)). Note that not all controls are possible for all interfaces. For example, only full-1000(6) is available for Gigabit Ethernet interfaces. Enumeration: 'half-1000': 6, 'full-100': 5, 'autonegotiate': 1, 'half-10': 2, 'full-1000': 7, 'full-10': 3, 'half-100': 4.
                 rcPortDuplexSpeedGet 1.3.6.1.4.1.8886.6.1.1.4.1.1.8 integer read-only
The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unknown(1) is returned when the 'rcPortLink' indicates down(2) for this interface. Enumeration: 'half-1000': 6, 'unknown': 1, 'half-10': 2, 'full-100': 5, 'illegal': 99, 'full-1000': 7, 'full-10': 3, 'half-100': 4.
                 rcPortFlowControlEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.9 enablevar read-write
Set the flow control on the interface to enable(1) or disable(2).
                 rcPortMacLearningEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.10 enablevar read-write
Set the learning ability on the interface to enable(1) or disable(2).
                 rcPortMacThreshold 1.3.6.1.4.1.8886.6.1.1.4.1.1.11 integer read-write
The Mac limit number on the interface or interface-vlan.
                 rcPortStormControlBcastEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.12 enablevar read-write
Set the broadcast storm control on the interface to enable(1) or disable(2).
                 rcPortStormControlMcastEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.13 enablevar read-write
Set the multicast storm control on the interface to enable(1) or disable(2).
                 rcPortStormControlDlfEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.14 enablevar read-write
Set the DLF storm control on the interface to enable(1) or disable(2).
                 rcPortStormControlBurst 1.3.6.1.4.1.8886.6.1.1.4.1.1.15 integer read-write
Set burst length when storm control open on the interface. .
                 rcPortStormControlLimit 1.3.6.1.4.1.8886.6.1.1.4.1.1.16 integer read-write
The limit number for storm control on this port .
                 rcPortStormControlLimitRatio 1.3.6.1.4.1.8886.6.1.1.4.1.1.17 integer read-write
storm control limit ratio on this port
                 rcPortDefaultPriority 1.3.6.1.4.1.8886.6.1.1.4.1.1.18 integer read-write
The received untaged frames are forwarded to a proper queue according to this default priority.
                 rcPortLoopbackDetectEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.19 enablevar read-write
Loopback detect of this port is on or off.
                 rcPortLoopbackDetectSrcPort 1.3.6.1.4.1.8886.6.1.1.4.1.1.20 integer read-only
The source port(it sends loopback-detect packets) makes of loop with loopback port.
                 rcPortProtected 1.3.6.1.4.1.8886.6.1.1.4.1.1.21 enablevar read-write
Traffic between protected port group members are blocked.
                 rcPortFlowControlRecvEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.22 enablevar read-write
Set the flow control on receive direction of the interface to enable(1) or disable(2).
                 rcPortFlowControlSendEnable 1.3.6.1.4.1.8886.6.1.1.4.1.1.23 enablevar read-write
Set the flow control on sender direction of the interface to enable(1) or disable(2).
                 rcPortFlowControlRecvStatus 1.3.6.1.4.1.8886.6.1.1.4.1.1.24 enablevar read-only
The flow control status on receive direction of the interface to enable(1) or disable(2).
                 rcPortFlowControlSendStatus 1.3.6.1.4.1.8886.6.1.1.4.1.1.25 enablevar read-only
The flow control status on sender direction of the interface to enable(1) or disable(2).
                 rcPortLoopbackDetectDownTime 1.3.6.1.4.1.8886.6.1.1.4.1.1.26 integer read-write
time of loopback port shutdown.
                 rcPortMediaAttachType 1.3.6.1.4.1.8886.6.1.1.4.1.1.27 integer read-only
media attachment type of this Ether like interface. Enumeration: 'copper': 1, 'fiber': 2, 'combo-copper': 6, 'sfp': 4, 'combo-sfp': 5, 'card': 3.
                 rcPortMediaAttachCapability 1.3.6.1.4.1.8886.6.1.1.4.1.1.28 integer read-only
Medium type and capability of media attachment units. It is different with rcPortType which identifys the capability of the Ether like interface. Enumeration: 'fiber-100M': 4, 'copper-100M': 2, 'inexistence': 0, 'unlimited': 5, 'copper-1000M': 1, 'fiber-1000M': 3.
                 rcPortMDIXMode 1.3.6.1.4.1.8886.6.1.1.4.1.1.29 integer read-write
Automatic MDI Crossover mode of a port/PHY Enumeration: 'auto': 3, 'xover': 2, 'normal': 1.
                 rcPortMDIXStatus 1.3.6.1.4.1.8886.6.1.1.4.1.1.30 integer read-write
Automatic MDI Crossover mode of a port/PHY Enumeration: 'xover': 2, 'normal': 1.
                 rcportDiscPKts 1.3.6.1.4.1.8886.6.1.1.4.1.1.31 counter32 read-only
The number of packets which were the difference between the total number of packets received on the interface and all packets transmitted out of the interface
                 rcPortMacThresholdVlan 1.3.6.1.4.1.8886.6.1.1.4.1.1.32 integer read-write
when the Mac limits mac-thredshold on the interface-vlan, it indicates the VlanId;when the mac limits mac-thredshold on interface, its value is 4095.
                 rcPortPhysicalStatus 1.3.6.1.4.1.8886.6.1.1.4.1.1.33 integer read-write
The current physical state of the interface. Enumeration: 'down': 2, 'up': 1.
                 rcPortLinkUpDelayTime 1.3.6.1.4.1.8886.6.1.1.4.1.1.34 integer read-write
The port link delay time.
         rcComboPortTable 1.3.6.1.4.1.8886.6.1.1.4.2 no-access
A table of Combo port and associated properties.
             rcComboPortEntry 1.3.6.1.4.1.8886.6.1.1.4.2.1 no-access
Table entry for Combo port status information.
                 rcComboIndex 1.3.6.1.4.1.8886.6.1.1.4.2.1.1 integer no-access
An index based 1 that uniquely identifies a Ether like interface.
                 rcComboPortIndex 1.3.6.1.4.1.8886.6.1.1.4.2.1.2 integer no-access
An index for media attachment on Combo that 'rcComboIndex' uniquely identifies a Ether like interface.
                 rcComboPortType 1.3.6.1.4.1.8886.6.1.1.4.2.1.3 integer read-only
port type identfies capability of Ether like interface. Enumeration: 'tx-1000M': 2, 'fx-SigMode-100M': 5, 'inexistence': 0, 'fx-DulMode-100M': 4, 'tx-100M': 6, 'fx-DulMode-1000M': 1, 'fx-SigMode-1000M': 3.
                 rcComboPortMediaAttachType 1.3.6.1.4.1.8886.6.1.1.4.2.1.4 integer read-only
media attachment type of Combo port. Enumeration: 'copper': 2, 'sfp': 1.
                 rcComboPortActiveStatus 1.3.6.1.4.1.8886.6.1.1.4.2.1.5 integer read-only
used to identify whether this Combo port currently be in the active state. Enumeration: 'active': 1, 'inactive': 2.
                 rcComboPortMediaAttachCapability 1.3.6.1.4.1.8886.6.1.1.4.2.1.6 integer read-only
Medium type and capability of media attachment units. It is different with rcComboPortType which identifys the capability of the Ether like interface Enumeration: 'copper-1000M': 1, 'fiber-1000M': 3, 'fiber-100M': 4, 'inexistence': 0, 'copper-100M': 2.
         rcPortStormControlTable 1.3.6.1.4.1.8886.6.1.1.4.3 no-access
A table of ports' storm control properties.
             rcPortStormControlEntry 1.3.6.1.4.1.8886.6.1.1.4.3.1 no-access
Table entry for ports' storm control information.
                 rcPortStormControlPortIndex 1.3.6.1.4.1.8886.6.1.1.4.3.1.1 integer no-access
An index based 1 that uniquely identifies a Ether like interface.
                 rcPortStormControlPktType 1.3.6.1.4.1.8886.6.1.1.4.3.1.2 integer no-access
An index that uniquely identifies packet type for storm control. Enumeration: 'broadcast': 1, 'multicast': 2, 'dlf': 3.
                 rcPortStormControlUnit 1.3.6.1.4.1.8886.6.1.1.4.3.1.3 integer read-write
unit of value for storm control. Enumeration: 'pps': 1, 'bps': 2.
                 rcPortStormControlMaxValue 1.3.6.1.4.1.8886.6.1.1.4.3.1.4 integer read-write
Max value for storm control.
     rcLoopbackTrap 1.3.6.1.4.1.8886.6.1.1.5
         rcLoopbackLinkUpTrap 1.3.6.1.4.1.8886.6.1.1.5.1
A linkDown trap signifies that the port identified by rcPortIndex change to link up state from link down.
         rcLoopbackLinkDownTrap 1.3.6.1.4.1.8886.6.1.1.5.2
A linkDown trap signifies that the port identified by rcPortIndex change to link down state from link up.
     rcPorConnectorChangeTrap 1.3.6.1.4.1.8886.6.1.1.6
         rcPortConnectorInsertTrap 1.3.6.1.4.1.8886.6.1.1.6.1
To notify NMS that connector has been inserted. If 'rcPortMediaAttachType' is 'combo' NMS need check 'rcComboPortTable' for deciding which combo port is inserted.
         rcPortConnectorRemoveTrap 1.3.6.1.4.1.8886.6.1.1.6.2
To notify NMS that connector has been removed. If 'rcPortMediaAttachType' is 'combo' NMS need check 'rcComboPortTable' for deciding which combo port is removed.
     rcPortMappingInfoConfig 1.3.6.1.4.1.8886.6.1.1.8
         rcUspPortToUspMappingTable 1.3.6.1.4.1.8886.6.1.1.8.1 no-access
The table describes how the port map to the USP.
             rcUspPortToUspMappingEntry 1.3.6.1.4.1.8886.6.1.1.8.1.1 no-access
Defines an entry in the rcUspPortToUspMappingTable.The index is rcPortIndex,while is unique in raisecom private mib.
                 rcUspPortToUspMappingUnitIndex 1.3.6.1.4.1.8886.6.1.1.8.1.1.1 integer read-only
The unit index which port is mapped to.
                 rcUspPortToUspMappingSlotIndex 1.3.6.1.4.1.8886.6.1.1.8.1.1.2 integer read-only
The slot index which port is mapped to.
                 rcUspPortToUspMappingPortIndex 1.3.6.1.4.1.8886.6.1.1.8.1.1.3 integer read-only
The port index which port is mapped to.
         rcUspUspToPortMappingTable 1.3.6.1.4.1.8886.6.1.1.8.2 no-access
The table describes how the USP map to the port.
             rcUspUspToPortMappingEntry 1.3.6.1.4.1.8886.6.1.1.8.2.1 no-access
Defines an entry in the rcUspUspToPortMappingTable.The indexes are rcUspUspToPortMappingUnitIndex,rcUspUspToPortMappingSlotIndex and rcUspUspToPortMappingPortIndex.
                 rcUspUspToPortMappingUnitIndex 1.3.6.1.4.1.8886.6.1.1.8.2.1.1 integer no-access
The unit index which is mapped to the port.
                 rcUspUspToPortMappingSlotIndex 1.3.6.1.4.1.8886.6.1.1.8.2.1.2 integer no-access
The slot index which is mapped to the port.
                 rcUspUspToPortMappingPortIndex 1.3.6.1.4.1.8886.6.1.1.8.2.1.3 integer no-access
The port index which is mapped to the port.
                 rcUspPortIndex 1.3.6.1.4.1.8886.6.1.1.8.2.1.4 integer read-only
The port index which the USP is mapped to.
         rcUspUnitNum 1.3.6.1.4.1.8886.6.1.1.8.3 integer read-only
The total unit number.
         rcUspUnitTable 1.3.6.1.4.1.8886.6.1.1.8.4 no-access
The table describes the detail of unit.
             rcUspUnitEntry 1.3.6.1.4.1.8886.6.1.1.8.4.1 no-access
Defines an entry in the rcUspUnitTable.The index is rcUspUnitIndex.
                 rcUspUnitIndex 1.3.6.1.4.1.8886.6.1.1.8.4.1.1 integer no-access
The port index which the USP is mapped to.
                 rcUspUnitSlotNum 1.3.6.1.4.1.8886.6.1.1.8.4.1.2 integer read-only
The total slot num which the corresponding unit has.
                 rcUspUnitPortNum 1.3.6.1.4.1.8886.6.1.1.8.4.1.3 integer read-only
The total port num which the corresponding unit has.
         rcUspSlotTable 1.3.6.1.4.1.8886.6.1.1.8.5 no-access
The table describes the detail of slot.
             rcUspSlotEntry 1.3.6.1.4.1.8886.6.1.1.8.5.1 no-access
Defines an entry in the rcUspSlotTable.The indexes are rcUspSlotUnitIndex and rcUspSlotSlotIndex.
                 rcUspSlotUnitIndex 1.3.6.1.4.1.8886.6.1.1.8.5.1.1 integer no-access
The unit index which a slot belongs to.
                 rcUspSlotSlotIndex 1.3.6.1.4.1.8886.6.1.1.8.5.1.2 integer no-access
The slot index.
                 rcUspSlotSlotType 1.3.6.1.4.1.8886.6.1.1.8.5.1.3 integer read-only
The slot type. Enumeration: 'manage-backup': 3, 'power': 4, 'manage': 2, 'pon': 10, 'tdm-clock': 9, 'other': 1, 'fan': 5, 'gigabit-ethenet': 8, 'fixed': 7, 'monite': 6.
                 rcUspSlotRightSubcardType 1.3.6.1.4.1.8886.6.1.1.8.5.1.4 integer read-only
The type of subcard which is suitable to the slot.
                 rcUspSlotActualSubcardType 1.3.6.1.4.1.8886.6.1.1.8.5.1.5 integer read-only
The type of subcard which is inserted to the slot.
                 rcUspSlotSerial 1.3.6.1.4.1.8886.6.1.1.8.5.1.6 octet string read-only
The serial number of slot.
                 rcUspSlotHardVersion 1.3.6.1.4.1.8886.6.1.1.8.5.1.7 octet string read-only
The hard version of slot.
                 rcUspSlotSoftwareVersion 1.3.6.1.4.1.8886.6.1.1.8.5.1.8 octet string read-only
The soft version of slot.
                 rcUspSlotPortStart 1.3.6.1.4.1.8886.6.1.1.8.5.1.9 integer read-only
The global port index this slot starts from.
                 rcUspSlotPortNum 1.3.6.1.4.1.8886.6.1.1.8.5.1.10 integer read-only
The number of ports this slot has.
                 rcUspSlotSlotState 1.3.6.1.4.1.8886.6.1.1.8.5.1.11 integer read-only
The slot State. Enumeration: 'active': 1, 'empty': 2.
         rcUspIfToUspMappingTable 1.3.6.1.4.1.8886.6.1.1.8.6 no-access
The table describes how the IF map to the USP.
             rcUspIfToUspMappingEntry 1.3.6.1.4.1.8886.6.1.1.8.6.1 no-access
Defines an entry in the rcUspIfToUspMappingTable.The index is ifIndex,while is unique in raisecom private mib.
                 rcUspIfToUspMappingUnitIndex 1.3.6.1.4.1.8886.6.1.1.8.6.1.1 integer read-only
The unit index which IF is mapped to.
                 rcUspIfToUspMappingSlotIndex 1.3.6.1.4.1.8886.6.1.1.8.6.1.2 integer read-only
The slot index which IF is mapped to.
                 rcUspIfToUspMappingPortIndex 1.3.6.1.4.1.8886.6.1.1.8.6.1.3 integer read-only
The port index which IF is mapped to.
                 rcUspIfType 1.3.6.1.4.1.8886.6.1.1.8.6.1.4 integer read-only
The IF type which IF is mapped to. Enumeration: 'none': 0, 'max': 13, 'gigaethernet': 7, 'tdm': 4, 'loopback': 11, 'aggregator': 9, 'tengigabitethernet': 8, 'fastethernet': 6, 'client': 3, 'outband': 12, 'ip': 10, 'ethernet': 5, 'line': 2, 'port': 1.
                 rcUspIfState 1.3.6.1.4.1.8886.6.1.1.8.6.1.5 integer read-only
The IF State. Enumeration: 'active': 1, 'empty': 2.
         rcUspUspToIfMappingTable 1.3.6.1.4.1.8886.6.1.1.8.7 no-access
The table describes how the USP map to the IF.
             rcUspUspToIfMappingEntry 1.3.6.1.4.1.8886.6.1.1.8.7.1 no-access
Defines an entry in the rcUspUspToIfMappingTable.The indexes are rcUspUspToIfMappingUnitIndex,rcUspUspToIfMappingSlotIndex,rcUspUspToIfMappingPortIndex and rcUspIfTypeIndex.
                 rcUspUspToIfMappingUnitIndex 1.3.6.1.4.1.8886.6.1.1.8.7.1.1 integer no-access
The unit index which is mapped to the IF.
                 rcUspUspToIfMappingSlotIndex 1.3.6.1.4.1.8886.6.1.1.8.7.1.2 integer no-access
The slot index which is mapped to the IF.
                 rcUspUspToIfMappingPortIndex 1.3.6.1.4.1.8886.6.1.1.8.7.1.3 integer no-access
The port index which is mapped to the IF.
                 rcUspIfTypeIndex 1.3.6.1.4.1.8886.6.1.1.8.7.1.4 integer no-access
The port type which is mapped to the IF. Enumeration: 'none': 0, 'max': 13, 'gigaethernet': 7, 'tdm': 4, 'loopback': 11, 'aggregator': 9, 'tengigabitethernet': 8, 'fastethernet': 6, 'client': 3, 'outband': 12, 'ip': 10, 'ethernet': 5, 'line': 2, 'port': 1.
                 rcUspIfIndex 1.3.6.1.4.1.8886.6.1.1.8.7.1.5 integer read-only
The If Index which is mapped to the IF.