STN-ROUTER-MIB: View SNMP OID List / Download MIB

VENDOR: SPRING TIDE NETWORKS


 Home MIB: STN-ROUTER-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, STN-CHASSIS-MIB, SPRING-TIDE-NETWORKS-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 stnRouter 1.3.6.1.4.1.3551.2.7
This MIB module describes managed objects of Spring Tide Networks virtual routers plus associated IP, PPP, and PPPOE interfaces.
     stnRouterObjects 1.3.6.1.4.1.3551.2.7.1
         stnRouterTable 1.3.6.1.4.1.3551.2.7.1.1 no-access
A list of router entries.
             stnRouterEntry 1.3.6.1.4.1.3551.2.7.1.1.1 no-access
Entry contains information about a particular router.
                 stnRouterIndex 1.3.6.1.4.1.3551.2.7.1.1.1.1 integer32 read-only
A sequence number that identifies a router entry in the table.
                 stnRouterType 1.3.6.1.4.1.3551.2.7.1.1.1.2 integer read-only
The router type. Enumeration: 'customer': 1, 'admin': 3, 'provider': 2.
                 stnRouterState 1.3.6.1.4.1.3551.2.7.1.1.1.3 operationstate read-only
The operational state of the router.
                 stnRouterEngineID 1.3.6.1.4.1.3551.2.7.1.1.1.4 integer32 read-only
The engine to which this router is currently assigned.
                 stnRouterHomeIpAddress 1.3.6.1.4.1.3551.2.7.1.1.1.5 ipaddress read-only
The Home IP address of this router.
                 stnRouterEnabled 1.3.6.1.4.1.3551.2.7.1.1.1.6 integer read-only
The variable to indicate if this router is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 stnRouterName 1.3.6.1.4.1.3551.2.7.1.1.1.7 displaystring read-only
The name of this router.
                 stnRouterUpTime 1.3.6.1.4.1.3551.2.7.1.1.1.8 timeticks read-only
The time (in hundredths of a second) since the router was last re-initialized.
                 stnRouterActiveSlot 1.3.6.1.4.1.3551.2.7.1.1.1.9 integer32 read-only
The slot/module to which this router is currently assigned.
                 stnRouterActiveCpu 1.3.6.1.4.1.3551.2.7.1.1.1.10 integer32 read-only
The CPU to which this router is currently assigned.
                 stnRouterConfiguredSlot 1.3.6.1.4.1.3551.2.7.1.1.1.11 integer32 read-only
The configured slot/module for this router.
                 stnRouterConfiguredCpu 1.3.6.1.4.1.3551.2.7.1.1.1.12 integer32 read-only
The configured CPU for this router.
                 stnRouterStandbySlot 1.3.6.1.4.1.3551.2.7.1.1.1.13 integer32 read-only
The standby slot/module for this router.
                 stnRouterStandbyCpu 1.3.6.1.4.1.3551.2.7.1.1.1.14 integer32 read-only
The standby CPU for this router.
                 stnRouterReassignOnFault 1.3.6.1.4.1.3551.2.7.1.1.1.15 integer read-only
The variable to indicate if this router should be reassigned if the module where to fail. Enumeration: 'disabled': 2, 'enabled': 1.
                 stnRouterServiceName 1.3.6.1.4.1.3551.2.7.1.1.1.16 displaystring read-only
The service to which this router belongs.
                 stnRouterServiceDomain 1.3.6.1.4.1.3551.2.7.1.1.1.17 integer32 read-only
The service domain to which this router belongs.
                 stnRouterDefaultPolicyAction 1.3.6.1.4.1.3551.2.7.1.1.1.18 integer read-only
Action to take when a packet does not match any policies. Enumeration: 'deny': 1, 'permit': 2.
         stnSubnetInterfaceTable 1.3.6.1.4.1.3551.2.7.1.2 no-access
A list of sub-network interface entries.
             stnSubnetInterfaceEntry 1.3.6.1.4.1.3551.2.7.1.2.1 no-access
Entry contains information about a particular sub-network interface.
                 stnSubnetInterfaceIndex 1.3.6.1.4.1.3551.2.7.1.2.1.1 unsigned32 read-only
A sequence number that identifies a sub-network interface entry in the table.
                 stnSubnetInterfaceEnabled 1.3.6.1.4.1.3551.2.7.1.2.1.2 integer read-only
Enable or disable the sub-network interface. Enumeration: 'disabled': 2, 'enabled': 1.
                 stnSubnetInterfaceAddress 1.3.6.1.4.1.3551.2.7.1.2.1.3 ipaddress read-only
The IP address of this interface.
                 stnSubnetInterfaceMask 1.3.6.1.4.1.3551.2.7.1.2.1.4 ipaddress read-only
The sub-network mask of this interface.
                 stnSubnetInterfaceVclid 1.3.6.1.4.1.3551.2.7.1.2.1.5 integer32 read-only
The vcl ID associated with this sub-network interface.
                 stnSubnetInterfaceType 1.3.6.1.4.1.3551.2.7.1.2.1.6 interfaceconnectiontype read-only
The interface type.
                 stnSubnetInterfaceState 1.3.6.1.4.1.3551.2.7.1.2.1.7 operationstate read-only
The operational state of the sub-network interface.
                 stnSubnetInterfaceRouterIndex 1.3.6.1.4.1.3551.2.7.1.2.1.8 integer32 read-only
The router this sub-network interface is associated with.
                 stnSubnetInterfaceLinkType 1.3.6.1.4.1.3551.2.7.1.2.1.9 integer read-only
Indicates the type of link the subnet interface is configured over. Enumeration: 'home': 3, 'vcLink': 1, 'vei': 2.
                 stnSubnetInterfaceLinkInstance 1.3.6.1.4.1.3551.2.7.1.2.1.10 integer32 read-only
The instance of the configuration record for the link the subnet interface is configured over.
                 stnSubnetInterfaceForcedNextHop 1.3.6.1.4.1.3551.2.7.1.2.1.11 ipaddress read-only
The IP address of the next hop router that all IP traffic received on this interface will be sent to
                 stnSubnetInterfaceServiceName 1.3.6.1.4.1.3551.2.7.1.2.1.12 displaystring read-only
The service to which this interface belongs.
         stnPppoeTable 1.3.6.1.4.1.3551.2.7.1.3 no-access
A list of PPPOE interface entries.
             stnPppoeEntry 1.3.6.1.4.1.3551.2.7.1.3.1 no-access
Entry contains information about a particular PPPOE interface.
                 stnPppoeIndex 1.3.6.1.4.1.3551.2.7.1.3.1.1 integer32 read-only
A sequence number that identifies a PPPOE interface entry in the table.
                 stnPppoeType 1.3.6.1.4.1.3551.2.7.1.3.1.2 interfaceconnectiontype read-only
The interface type.
                 stnPppoeState 1.3.6.1.4.1.3551.2.7.1.3.1.3 operationstate read-only
The operational state of the PPPOE interface.
                 stnPppoeVclid 1.3.6.1.4.1.3551.2.7.1.3.1.4 integer32 read-only
The vcl ID associated with this PPPOE interface.
                 stnPppoeIfIndex 1.3.6.1.4.1.3551.2.7.1.3.1.5 interfaceindex read-only
The ifindex.
                 stnPppoeRouterIndex 1.3.6.1.4.1.3551.2.7.1.3.1.6 integer32 read-only
The router this PPPOE interface is associated with.
                 stnPppoeLinkType 1.3.6.1.4.1.3551.2.7.1.3.1.7 integer read-only
Indicates the type of link the PPPoE interface is configured over. Enumeration: 'vcLink': 1, 'vei': 2.
                 stnPppoeLinkInstance 1.3.6.1.4.1.3551.2.7.1.3.1.8 integer32 read-only
The instance of the configuration record for the link the PPPoE interface is configured over.
         stnPppTable 1.3.6.1.4.1.3551.2.7.1.4 no-access
A list of PPP interface entries.
             stnPppEntry 1.3.6.1.4.1.3551.2.7.1.4.1 no-access
Entry contains information about a particular session.
                 stnPppIndex 1.3.6.1.4.1.3551.2.7.1.4.1.1 integer32 read-only
A sequence number that identifies a PPP interface entry in the table.
                 stnPppType 1.3.6.1.4.1.3551.2.7.1.4.1.2 interfaceconnectiontype read-only
The interface type.
                 stnPppState 1.3.6.1.4.1.3551.2.7.1.4.1.3 operationstate read-only
The operational state or the PPP interface.
                 stnPppVclid 1.3.6.1.4.1.3551.2.7.1.4.1.4 integer32 read-only
The vcl ID associated with this PPP interface.
                 stnPppIfIndex 1.3.6.1.4.1.3551.2.7.1.4.1.5 interfaceindex read-only
The ifindex.
                 stnPppRouterIndex 1.3.6.1.4.1.3551.2.7.1.4.1.6 integer32 read-only
The router this PPP interface is associated with.
         stnRouterNAT 1.3.6.1.4.1.3551.2.7.1.5
         stnRouterVEI 1.3.6.1.4.1.3551.2.7.1.6
         stnRouterAtmVpn 1.3.6.1.4.1.3551.2.7.1.7
         stnRouterVimuxMpls 1.3.6.1.4.1.3551.2.7.1.8
         stnRouterVTI 1.3.6.1.4.1.3551.2.7.1.9
     stnRouterMibConformance 1.3.6.1.4.1.3551.2.7.2
             stnRouterUp 1.3.6.1.4.1.3551.2.100.0.26
A stnRouterUp trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the assigned(4) state for one of its routers. The generation of this trap can be controlled by the RouterUpTraps configuration object.
             stnRouterDown 1.3.6.1.4.1.3551.2.100.0.27
A stnRouterDown trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its routers. The generation of this trap can be controlled by the RouterDownTraps configuration object.
             stnRouterReassigned 1.3.6.1.4.1.3551.2.100.0.28
A stnRouterReassigned trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the the assigned(1) state for one of its routers. The generation of this trap can be controlled by the RouterReassignedTraps configuration object.
             stnRouterReassignFailure 1.3.6.1.4.1.3551.2.100.0.29
A stnRouterReassignFailure trap signifies that the agent entity has detected that the stnRouterState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its routers. The generation of this trap can be controlled by the RouterReassignFailureTraps configuration object.
             stnSubnetIfAssignFailure 1.3.6.1.4.1.3551.2.100.0.30
A stnSubnetIfAssignFailure trap signifies that the agent entity has detected that the stnSubnetInterfaceState object in the STN-ROUTER-MIB has transitioned to the failedassign(7) or error(8) state for one of its interfaces. The generation of this trap can be controlled by the stnEnableSubnetInterfaceTraps configuration object.
             stnConfigAuditRouterFailure 1.3.6.1.4.1.3551.2.100.0.33
A stnConfigAuditRouterFailure trap signifies that the agent entity has detected an inconsistency between an active and configured routers after a failover. The generation of this trap can be controlled by the CfgAuditRouterTraps configuration object.
             stnConfigAuditSubnetIfFailure 1.3.6.1.4.1.3551.2.100.0.34
A stnConfigAuditSubnetIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured subnet interface after a failover. The generation of this trap can be controlled by the CfgAuditSubnetIfTraps configuration object.
             stnConfigAuditPppoeIfFailure 1.3.6.1.4.1.3551.2.100.0.35
A stnConfigAuditPppoeIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured PPPOE interface after a failover. The generation of this trap can be controlled by the CfgAuditPppoeIfTraps configuration object.
             stnConfigAuditPppIfFailure 1.3.6.1.4.1.3551.2.100.0.36
A stnConfigAuditPppIfFailure trap signifies that agent entity has detected an inconsistency between an active and configured PPP interface after a failover. The generation of this trap can be controlled by the CfgAuditPppIfTraps configuration object.