STARTEK-PRIVATE-MIB: View SNMP OID List / Download MIB

VENDOR: STAR-TEK


 Home MIB: STARTEK-PRIVATE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 startek 1.3.6.1.4.1.260
         products 1.3.6.1.4.1.260.1
             m828Series 1.3.6.1.4.1.260.1.1
                 m828Hubs 1.3.6.1.4.1.260.1.1.1
                     m828HubNumber 1.3.6.1.4.1.260.1.1.1.1 integer read-only
The number of items in hub table.
                     m828HubTable 1.3.6.1.4.1.260.1.1.1.2 no-access
A table which maintains a list of all of the intelligent m828 series hubs on the ring being managed by the addressed agent. This table is indexed by the RS485 OOB address of the m828 series intelligent hubs.
                         m828HubTableEntry 1.3.6.1.4.1.260.1.1.1.2.1 no-access
An entry in the m828HubTable.
                             m828HubTableIndex 1.3.6.1.4.1.260.1.1.1.2.1.1 integer read-only
The index for this hub entry.
                             m828HubModel 1.3.6.1.4.1.260.1.1.1.2.1.2 integer read-only
The model number of the m828 series hub being managed. Enumeration: 'model-7': 4, 'model-6': 3, 'model-5': 2, 'model-4': 1.
                             m828Hub485Address 1.3.6.1.4.1.260.1.1.1.2.1.3 octet string read-only
The 4 hex digit address used on the RS485 serial OOB management channel.
                             m828HubRiFTolSw 1.3.6.1.4.1.260.1.1.1.2.1.4 integer read-only
The status of the Ring In fault tolerance switch on the front panel of the hub. Enumeration: 'on': 2, 'off': 1.
                             m828HubRiFTolState 1.3.6.1.4.1.260.1.1.1.2.1.5 integer read-write
This parameter controls the Ring In (RI) fault tolerance behavior. The default value for this parameter is the same setting as is present for m828HubRiFTolSw. SETTING this parameter overrides the value derived from m828HubRiFTolSw. Off(1) means that phantom currentis not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means that phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preffered setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             m828HubRiMask 1.3.6.1.4.1.260.1.1.1.2.1.6 integer read-write
Administrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             m828HubRiPhDet 1.3.6.1.4.1.260.1.1.1.2.1.7 integer read-only
This parameter describes the phantom detect status for this Ring In port. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             m828HubRiNsrtStatus 1.3.6.1.4.1.260.1.1.1.2.1.8 integer read-only
Insertion status for this Ring In port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             m828HubRiBcnRemStatus 1.3.6.1.4.1.260.1.1.1.2.1.9 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             m828RiNeighborType 1.3.6.1.4.1.260.1.1.1.2.1.10 integer read-only
This parameter indicates the type of nearest neighbor on the Ring In port. Enumeration: 'stackable': 5, 'none': 4, 'series828': 1, 'fSeries': 2, 'tokenRingMAC': 3.
                             m828RiNeighborAddr 1.3.6.1.4.1.260.1.1.1.2.1.11 octet string read-only
The address of the nearest neighbor on the Ring In port.
                             m828RiTimeStamp 1.3.6.1.4.1.260.1.1.1.2.1.12 timeticks read-only
The time the status of Ring In (was) last changed.
                             m828HubRoFTolSw 1.3.6.1.4.1.260.1.1.1.2.1.13 integer read-only
The state of the Ring Out Fault Tolerance switch on the front panel of the unit. Enumeration: 'on': 2, 'off': 1.
                             m828HubRoFTolState 1.3.6.1.4.1.260.1.1.1.2.1.14 integer read-write
This parameter controls the Ring Out(RO) fault tolerance behavior. The default value for this parameter is the same setting as is present for m828HubRoFTolSw. SETTING this parameter overrides the value derived from m828HubRoFTolSw. Off(1) means that phantom currentis not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means that phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preffered setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             m828HubRoMask 1.3.6.1.4.1.260.1.1.1.2.1.15 integer read-write
Administrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             m828HubRoPhDet 1.3.6.1.4.1.260.1.1.1.2.1.16 integer read-only
This parameter describes the phantom detect status for this Ring Out port. Enumeration: 'wireFault': 1, 'phantOk': 2.
                             m828HubRoNsrtStatus 1.3.6.1.4.1.260.1.1.1.2.1.17 integer read-only
Insertion status for this Ring Out port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             m828HubRoBcnRemStatus 1.3.6.1.4.1.260.1.1.1.2.1.18 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             m828RoNeighborType 1.3.6.1.4.1.260.1.1.1.2.1.19 integer read-only
This parameter indicates the type of nearest neighbor on the Ring Out port. Enumeration: 'stackable': 5, 'none': 4, 'series828': 1, 'fSeries': 2, 'tokenRingMAC': 3.
                             m828RoNeighborAddr 1.3.6.1.4.1.260.1.1.1.2.1.20 octet string read-only
The address of the nearest neighbor on the Ring Out port.
                             m828RoTimeStamp 1.3.6.1.4.1.260.1.1.1.2.1.21 timeticks read-only
The time the status of Ring Out (was) last changed.
                             m828HubDataRateSwitch 1.3.6.1.4.1.260.1.1.1.2.1.22 integer read-only
Setting of this parameter changes the data rate of this unit. A value of noSwitch(3) indicates that the setting of the data rate is not available on this unit. Enumeration: 's4Mbps': 1, 's16Mbps': 2, 'noSwitch': 3.
                             m828HubDataRateState 1.3.6.1.4.1.260.1.1.1.2.1.23 integer read-write
This parameter indicates the current data rate of this unit. Enumeration: 's4Mbps': 1, 's16Mbps': 2, 'autoConfig': 3.
                             m828HubDataRateTimeStamp 1.3.6.1.4.1.260.1.1.1.2.1.24 timeticks read-only
The time the data rate status (was) last changed.
                             m828HubMgmtStatus 1.3.6.1.4.1.260.1.1.1.2.1.25 integer read-only
The operational status of this unit. Enumeration: 'down': 2, 'operational': 1.
                             m828HubProxyAgentID 1.3.6.1.4.1.260.1.1.1.2.1.26 octet string read-only
The physical layer MAC Address of the agent.
                             m828HubCodeVersion 1.3.6.1.4.1.260.1.1.1.2.1.27 octet string read-only
The firmware version number of this unit.
                             m828HubRawCommandData 1.3.6.1.4.1.260.1.1.1.2.1.28 octet string read-write
This is used to send raw 485 serial data to this unit.
                     m828HubLobeNumber 1.3.6.1.4.1.260.1.1.1.3 integer read-only
The number of items in the hub lobe table.
                     m828HubLobeTable 1.3.6.1.4.1.260.1.1.1.4 no-access
A table which contains the control and status information for the lobes.
                         m828HubLobeEntry 1.3.6.1.4.1.260.1.1.1.4.1 no-access
A collection of control and status parameters kept for each lobe.
                             m828HubIndex 1.3.6.1.4.1.260.1.1.1.4.1.1 integer read-only
The index into the m828HubTable of the mau this lobe is on.
                             m828HubLobePort 1.3.6.1.4.1.260.1.1.1.4.1.2 integer read-only
The port of the mau this lobe is on.
                             m828HubLobePhDet 1.3.6.1.4.1.260.1.1.1.4.1.3 integer read-only
Phantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             m828HubLobeMask 1.3.6.1.4.1.260.1.1.1.4.1.4 integer read-write
Administrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port. Enumeration: 'enabled': 2, 'isolated': 1.
                             m828HubLobeNsrtStatus 1.3.6.1.4.1.260.1.1.1.4.1.5 integer read-only
Actual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring. Enumeration: 'bypassed': 1, 'inserted': 2.
                             m828HubLobeMacAddr 1.3.6.1.4.1.260.1.1.1.4.1.6 octet string read-only
The MAC layer address of the station which is attached to the corresponding lobe port.
                             m828HubLobeBcnRemStatus 1.3.6.1.4.1.260.1.1.1.4.1.7 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'unknown': 3, 'ok': 1.
                             m828HubLobeTimeStamp 1.3.6.1.4.1.260.1.1.1.4.1.8 timeticks read-only
The time the status of this lobe (was) last changed.
             fSeries 1.3.6.1.4.1.260.1.2
                 fChassis 1.3.6.1.4.1.260.1.2.1
                     fChassisNumber 1.3.6.1.4.1.260.1.2.1.1 integer read-only
The number of chassis in table
                     fChassisTable 1.3.6.1.4.1.260.1.2.1.2 no-access
A table which describes which modules are plugged into which slots of the chassis.
                         fChassisTableEntry 1.3.6.1.4.1.260.1.2.1.2.1 no-access
                             fChassisIndex 1.3.6.1.4.1.260.1.2.1.2.1.1 integer read-only
Index of this entry
                             fChassisModel 1.3.6.1.4.1.260.1.2.1.2.1.2 integer read-only
The model number of the f series chassis in which the addressed management agent is installed. Enumeration: 'fiveslot-10101': 2, 'twoslot-10100': 1, 'reserved8': 8, 'fiveslotredundant-10102': 3, 'reserved5': 5, 'reserved4': 4, 'reserved7': 7, 'reserved6': 6.
                             fChassisPowStatus 1.3.6.1.4.1.260.1.2.1.2.1.3 integer read-only
The status of the power supply or supplies in the chassis. Enumeration: 'illegal': 5, 'dualSupOK': 2, 'singleSupOK': 1, 'dualSup-ASupBAD': 4, 'dualSup-BSupBAD': 3.
                             fChassisLocation 1.3.6.1.4.1.260.1.2.1.2.1.4 integer read-only
The location of the chassis. Enumeration: 'local': 1, 'external': 2.
                 fTRMainRing 1.3.6.1.4.1.260.1.2.2
                     fTRMainRingNumber 1.3.6.1.4.1.260.1.2.2.1 integer read-only
The number of the ring.
                     fTRMainRingTable 1.3.6.1.4.1.260.1.2.2.2 no-access
A table which maintains a list of all of the intelligent Focus series hubs on the ring being managed by the addressed agent. This table is INDEXed by the RS485 OOB address of the Focus series intelligent hubs.
                         fTRMainRingTableEntry 1.3.6.1.4.1.260.1.2.2.2.1 no-access
An entry in the fTRMainRingTable
                             fTRMainRingTableIndex 1.3.6.1.4.1.260.1.2.2.2.1.1 integer read-only
The index for this ring entry.
                             fTRMainRingModel 1.3.6.1.4.1.260.1.2.2.2.1.2 integer read-only
The model number of the Focus series hub being managed. Enumeration: 'f10150RiRoExpModuleAgent': 3, 'f10154RiRoExpModule': 1, 'f10155RiRoFiberExpModule': 2, 'f10151RiRoFiberExpModuleAgent': 4.
                             fTRMainRing485Address 1.3.6.1.4.1.260.1.2.2.2.1.3 octet string read-only
The 6 hex digit address used on the RS485 serial OOB management channel.
                             fTRMainRingSlotIndex 1.3.6.1.4.1.260.1.2.2.2.1.4 integer read-only
The slot id.
                             fTRMainRingChassisIndex 1.3.6.1.4.1.260.1.2.2.2.1.5 integer read-only
The index of the chassis the card is in.
                             fTRMainRingRiFTolState 1.3.6.1.4.1.260.1.2.2.2.1.6 integer read-write
This parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means that phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             fTRMainRingRiMask 1.3.6.1.4.1.260.1.2.2.2.1.7 integer read-write
Administrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             fTRMainRingRiPhDet 1.3.6.1.4.1.260.1.2.2.2.1.8 integer read-only
This parameter describes the phantom detect status of the Ring In port. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             fTRMainRingRiNsrtStatus 1.3.6.1.4.1.260.1.2.2.2.1.9 integer read-only
Insertion status for this Ring In port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             fTRMainRingRiBcnRemStatus 1.3.6.1.4.1.260.1.2.2.2.1.10 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             fTRMainRingRiCableType 1.3.6.1.4.1.260.1.2.2.2.1.11 integer read-only
This parameter indicates the type of physical cabling used for the network interface on the Ring In port. Enumeration: 'copper': 1, 'fiber': 2.
                             fTRMainRingRiNghbrType 1.3.6.1.4.1.260.1.2.2.2.1.12 integer read-only
This parameter indicates the type of nearest neighbor on the Ring In port. Enumeration: 'stackable': 5, 'none': 4, 'series828': 1, 'fSeries': 2, 'tokenRingMAC': 3.
                             fTRMainRingRiNghbrAddr 1.3.6.1.4.1.260.1.2.2.2.1.13 octet string read-only
The address of the nearest neighbor on the Ring In port.
                             fTRMainRingRiTimeStamp 1.3.6.1.4.1.260.1.2.2.2.1.14 timeticks read-only
The time the status of Ring In (was) last changed.
                             fTRMainRingRoFTolState 1.3.6.1.4.1.260.1.2.2.2.1.15 integer read-write
This controls the Ring Out (RO) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             fTRMainRingRoMask 1.3.6.1.4.1.260.1.2.2.2.1.16 integer read-write
Administrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             fTRMainRingRoPhDet 1.3.6.1.4.1.260.1.2.2.2.1.17 integer read-only
This parameter describes the phantom detect status for this Ring Out port. Enumeration: 'wireFault': 1, 'phantOk': 2.
                             fTRMainRingRoNsrtStatus 1.3.6.1.4.1.260.1.2.2.2.1.18 integer read-only
Insertion status for this Ring Out port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             fTRMainRingRoBcnRemStatus 1.3.6.1.4.1.260.1.2.2.2.1.19 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             fTRMainRingRoCableType 1.3.6.1.4.1.260.1.2.2.2.1.20 integer read-only
This parameter indicates the type of physical cabling used for the network interface on the Ring Out port. Enumeration: 'copper': 1, 'fiber': 2.
                             fTRMainRingRoNghbrType 1.3.6.1.4.1.260.1.2.2.2.1.21 integer read-only
This parameter indicates the type of nearest neighbor on the Ring Out port. Enumeration: 'stackable': 5, 'none': 4, 'series828': 1, 'fSeries': 2, 'tokenRingMAC': 3.
                             fTRMainRingRoNghbrAddr 1.3.6.1.4.1.260.1.2.2.2.1.22 octet string read-only
The address of the nearest neighbor on the Ring Out port.
                             fTRMainRingRoTimeStamp 1.3.6.1.4.1.260.1.2.2.2.1.23 timeticks read-only
The time the status of Ring Out (was) last changed.
                             fTRMainRingDataRateState 1.3.6.1.4.1.260.1.2.2.2.1.24 integer read-write
This parameter indicates the current data rate of this unit. Enumeration: 's4Mbps': 1, 's16Mbps': 2.
                             fTRMainRingDataRateTimeStamp 1.3.6.1.4.1.260.1.2.2.2.1.25 timeticks read-only
The time the data rate status (was) last changed.
                             fTRMainRingBkPlnNsrtState 1.3.6.1.4.1.260.1.2.2.2.1.26 integer read-write
Backplane insertion status for this unit. Enumeration: 'bypassed': 2, 'inserted': 1.
                             fTRMainRingBkPlnTimeStamp 1.3.6.1.4.1.260.1.2.2.2.1.27 timeticks read-only
The time the backplane insert status (was) last changed.
                             fTRMainRingLobePhDet 1.3.6.1.4.1.260.1.2.2.2.1.28 integer read-only
Phantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             fTRMainRingLobeMask 1.3.6.1.4.1.260.1.2.2.2.1.29 integer read-write
Administrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port. Enumeration: 'enabled': 2, 'isolated': 1.
                             fTRMainRingLobeNsrtStatus 1.3.6.1.4.1.260.1.2.2.2.1.30 integer read-only
Actual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring. Enumeration: 'bypassed': 1, 'inserted': 2.
                             fTRMainRingLobeMacAddr 1.3.6.1.4.1.260.1.2.2.2.1.31 octet string read-only
The MAC layer address of the station which is attached to the corresponding lobe port.
                             fTRMainRingLobeBcnRemStatus 1.3.6.1.4.1.260.1.2.2.2.1.32 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'unknown': 3, 'ok': 1.
                             fTRMainRingLobeTimeStamp 1.3.6.1.4.1.260.1.2.2.2.1.33 timeticks read-only
The time the status of this lobe (was) last changed.
                             fTRMainRingMgmtStatus 1.3.6.1.4.1.260.1.2.2.2.1.34 integer read-only
The operational status of this unit. Enumeration: 'down': 2, 'operational': 1.
                             fTRMainRingProxyAgentID 1.3.6.1.4.1.260.1.2.2.2.1.35 octet string read-only
The physical layer MAC Address of the agent.
                             fTRMainRingAttachedAgentType 1.3.6.1.4.1.260.1.2.2.2.1.36 integer read-only
The type of the attached agent. Enumeration: 'tokenring': 1, 'none': 4, 'reserved': 3, 'tokenring-ethernet': 2.
                             fTRMainRingAttachedAgentState 1.3.6.1.4.1.260.1.2.2.2.1.37 integer read-write
The state of the attached agent. Enumeration: 'disabled': 2, 'enabled': 1, 'not-applicable': 3.
                             fTRMainRingTemperatureStatus 1.3.6.1.4.1.260.1.2.2.2.1.38 integer read-only
The temperature status of this unit. Enumeration: 'bad': 2, 'ok': 1.
                             fTRMainRingAutoRecovControl 1.3.6.1.4.1.260.1.2.2.2.1.39 integer read-write
This parameter controls the auto recovery operation of this unit. Enumeration: 'disabled': 2, 'reset': 3, 'enabled': 1, 'unknown': 4.
                             fTRMainRingAutoRecovRetries 1.3.6.1.4.1.260.1.2.2.2.1.40 integer read-write
The number of Auto Recoveries performed by this unit.
                             fTRMainRingCodeVersion 1.3.6.1.4.1.260.1.2.2.2.1.41 octet string read-only
The firmware version number of this unit.
                             fTRMainRingAutoRecovState 1.3.6.1.4.1.260.1.2.2.2.1.42 integer read-only
The auto recovery state of this unit. Enumeration: 'in-recovery': 1, 'halted': 3, 'normal': 2.
                             fTRMainRingRawCommandData 1.3.6.1.4.1.260.1.2.2.2.1.43 octet string read-write
This is used to send raw 485 serial data to this unit.
                             fTRMainRingPowerStatus 1.3.6.1.4.1.260.1.2.2.2.1.44 integer read-only
The status of the power supply as seen by this unit. Enumeration: 'illegal': 5, 'dualSupOK': 2, 'singleSupOK': 1, 'dualSup-ASupBAD': 4, 'dualSup-BSupBAD': 3.
                             fTRMainRingCageType 1.3.6.1.4.1.260.1.2.2.2.1.45 integer read-only
The model number of the f series chassis the card is is. Enumeration: 'fiveslot-10101': 2, 'twoslot-10100': 1, 'reserved8': 8, 'fiveslotredundant-10102': 3, 'reserved5': 5, 'reserved4': 4, 'reserved7': 7, 'reserved6': 6.
                             fTRMainRingAutoRecovMode 1.3.6.1.4.1.260.1.2.2.2.1.46 integer read-write
This parameter describes the auto recovery mode. Enumeration: 'selfEnabling': 1, 'non-selfEnabling': 2.
                 fTRLobe 1.3.6.1.4.1.260.1.2.3
                     fTRLobeNumber 1.3.6.1.4.1.260.1.2.3.1 integer read-only
The number of items in the lobe table
                     fTRLobeTable 1.3.6.1.4.1.260.1.2.3.2 no-access
A table which maintains a list of all of the intelligent Focus series hubs on the ring being managed by the addressed agent. This table is INDEXed by the RS485 OOB address of the Focus series intelligent hubs.
                         fTRLobeTableEntry 1.3.6.1.4.1.260.1.2.3.2.1 no-access
An entry in the fTRLobeTable
                             fTRLobeTableIndex 1.3.6.1.4.1.260.1.2.3.2.1.1 integer read-only
The index for this lobe entry
                             fTRLobeModel 1.3.6.1.4.1.260.1.2.3.2.1.2 integer read-only
The Mau type of the Focus series lobe being managed. Enumeration: 'f10158trActiveMa': 2, 'f10157trPassiveMa': 1.
                             fTRLobe485Address 1.3.6.1.4.1.260.1.2.3.2.1.3 octet string read-only
The 6 hex digit address used on the RS485 serial OOB management channel.
                             fTRLobeSlotIndex 1.3.6.1.4.1.260.1.2.3.2.1.4 integer read-only
The slot id.
                             fTRLobeChassisIndex 1.3.6.1.4.1.260.1.2.3.2.1.5 integer read-only
The index of the chassis the card is in.
                             fTRLobeDataRateState 1.3.6.1.4.1.260.1.2.3.2.1.6 integer read-write
This parameter indicates the current data rate of this unit. Enumeration: 's4Mbps': 1, 's16Mbps': 2.
                             fTRLobeDataRateTimeStamp 1.3.6.1.4.1.260.1.2.3.2.1.7 timeticks read-only
The time the data rate status (was) last changed.
                             fTRLobeBkPlnNsrtState 1.3.6.1.4.1.260.1.2.3.2.1.8 integer read-write
Backplane insertion status for this unit. Enumeration: 'bypassed': 2, 'inserted': 1.
                             fTRLobeBkPlnTimeStamp 1.3.6.1.4.1.260.1.2.3.2.1.9 timeticks read-only
The time the backplane insert status (was) last changed.
                             fTRLobeMgmtStatus 1.3.6.1.4.1.260.1.2.3.2.1.10 integer read-only
The operational status of this unit. Enumeration: 'down': 2, 'operational': 1.
                             fTRLobeProxyAgentID 1.3.6.1.4.1.260.1.2.3.2.1.11 octet string read-only
The physical layer MAC Address of the agent.
                             fTRLobeTemperatureStatus 1.3.6.1.4.1.260.1.2.3.2.1.12 integer read-only
The temperature status of this unit. Enumeration: 'bad': 2, 'ok': 1.
                             fTRLobeAutoRecovControl 1.3.6.1.4.1.260.1.2.3.2.1.13 integer read-write
This parameter controls the auto recovery operation of this unit. Enumeration: 'disabled': 2, 'reset': 3, 'enabled': 1.
                             fTRLobeAutoRecovMode 1.3.6.1.4.1.260.1.2.3.2.1.14 integer read-write
This parameter describes the auto recovery mode. Enumeration: 'selfEnabling': 1, 'non-selfEnabling': 2.
                             fTRLobeAutoRecovRetries 1.3.6.1.4.1.260.1.2.3.2.1.15 integer read-write
The number of Auto Recoveries performed by this unit.
                             fTRLobeCodeVersion 1.3.6.1.4.1.260.1.2.3.2.1.16 octet string read-only
The firmware version number of this unit.
                             fTRLobeAutoRecovState 1.3.6.1.4.1.260.1.2.3.2.1.17 integer read-only
The auto recovery state of this unit. Enumeration: 'in-recovery': 1, 'halted': 3, 'normal': 2.
                             fTRLobeRawCommandData 1.3.6.1.4.1.260.1.2.3.2.1.18 octet string read-write
This is used to send raw 485 serial data to this unit.
                             fTRLobePowerStatus 1.3.6.1.4.1.260.1.2.3.2.1.19 integer read-only
The status of the power supply as seen by this unit. Enumeration: 'illegal': 5, 'dualSupOK': 2, 'singleSupOK': 1, 'dualSup-ASupBAD': 4, 'dualSup-BSupBAD': 3.
                             fTRLobeCageType 1.3.6.1.4.1.260.1.2.3.2.1.20 integer read-only
The model number of the fseries chassis the card is is. Enumeration: 'fiveslot-10101': 2, 'twoslot-10100': 1, 'reserved8': 8, 'fiveslotredundant-10102': 3, 'reserved5': 5, 'reserved4': 4, 'reserved7': 7, 'reserved6': 6.
                     fTRLobeConnectNumber 1.3.6.1.4.1.260.1.2.3.3 integer read-only
The number of items in connection table
                     fTRLobeConnectTable 1.3.6.1.4.1.260.1.2.3.4 no-access
A table which contains the control and status information for the lobes.
                         fTRLobeConnectEntry 1.3.6.1.4.1.260.1.2.3.4.1 no-access
A collection of control and status parameters kept for each lobe.
                             fTRLobeIndex 1.3.6.1.4.1.260.1.2.3.4.1.1 integer read-only
The index into the fTRLobeTable of the mau this lobe is on.
                             fTRLobeConnectPort 1.3.6.1.4.1.260.1.2.3.4.1.2 integer read-only
The port of the mau this lobe is on.
                             fTRLobeConnectPhDet 1.3.6.1.4.1.260.1.2.3.4.1.3 integer read-only
Phantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             fTRLobeConnectMask 1.3.6.1.4.1.260.1.2.3.4.1.4 integer read-write
Administrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port. Enumeration: 'enabled': 2, 'isolated': 1.
                             fTRLobeConnectNsrtStatus 1.3.6.1.4.1.260.1.2.3.4.1.5 integer read-only
Actual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring. Enumeration: 'bypassed': 1, 'inserted': 2.
                             fTRLobeConnectMacAddr 1.3.6.1.4.1.260.1.2.3.4.1.6 octet string read-only
The MAC layer address of the station which is attached to the corresponding lobe port.
                             fTRLobeConnectBcnRemStatus 1.3.6.1.4.1.260.1.2.3.4.1.7 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'unknown': 3, 'ok': 1.
                             fTRLobeConnectBcnRemCause 1.3.6.1.4.1.260.1.2.3.4.1.8 integer read-only
This parameter describes the cause of any automatic beacon removal Enumeration: 'no-removal': 1, 'no-carrier': 3, 'phantom-error': 2, 'bad-rate': 4, 'unknown': 5.
                             fTRLobeConnectTimeStamp 1.3.6.1.4.1.260.1.2.3.4.1.9 timeticks read-only
The time the status of this lobe (was) last changed.
                 fEthernet 1.3.6.1.4.1.260.1.2.4
                     fEthernetNumber 1.3.6.1.4.1.260.1.2.4.1 integer read-only
The number of items in concentrator table
                     fEthernetTable 1.3.6.1.4.1.260.1.2.4.2 no-access
A table which maintains a list of all of the Focus series ethernet concentrators in the repeater being managed by the addressed agent. This table is INDEXed by the repeater group id of the Focus series ethernet concentrators.
                         fEthernetTableEntry 1.3.6.1.4.1.260.1.2.4.2.1 no-access
An entry in the fEthernetTable
                             fEthernetTableIndex 1.3.6.1.4.1.260.1.2.4.2.1.1 integer read-only
The index for this hub entry.
                             fEthernetModel 1.3.6.1.4.1.260.1.2.4.2.1.2 integer read-only
The model number of the Focus series ethernet concentrator being managed. Enumeration: 'f10160': 1, 'f10161': 2.
                             fEthernet485Address 1.3.6.1.4.1.260.1.2.4.2.1.3 octet string read-only
The 6 hex digit address used on the RS485 serial OOB management channel.
                             fEthernetSlotIndex 1.3.6.1.4.1.260.1.2.4.2.1.4 integer read-only
The slot id.
                             fEthernetChassisIndex 1.3.6.1.4.1.260.1.2.4.2.1.5 integer read-only
The index of the chassis the card is in.
                             fEthernetBkPlnNsrtState 1.3.6.1.4.1.260.1.2.4.2.1.6 integer read-write
Backplane insertion status for this unit. Enumeration: 'bypassed': 2, 'inserted': 1.
                             fEthernetBkPlnTimeStamp 1.3.6.1.4.1.260.1.2.4.2.1.7 timeticks read-only
The time the backplane insert status (was) last changed.
                             fEthernetMgmtStatus 1.3.6.1.4.1.260.1.2.4.2.1.8 integer read-only
The operational status of this unit. Enumeration: 'down': 2, 'operational': 1.
                             fEthernetProxyAgentID 1.3.6.1.4.1.260.1.2.4.2.1.9 octet string read-only
The physical layer MAC Address of the agent.
                             fEthernetTemperatureStatus 1.3.6.1.4.1.260.1.2.4.2.1.10 integer read-only
The temperature status of this unit. Enumeration: 'bad': 2, 'ok': 1.
                             fEthernetCodeVersion 1.3.6.1.4.1.260.1.2.4.2.1.11 octet string read-only
The firmware version number of this unit.
                             fEthernetRawCommandData 1.3.6.1.4.1.260.1.2.4.2.1.12 octet string read-write
This is used to send raw 485 serial data to this unit.
                             fEthernetPowerStatus 1.3.6.1.4.1.260.1.2.4.2.1.13 integer read-only
The status of the power supply as seen by this unit. Enumeration: 'illegal': 5, 'dualSupOK': 2, 'singleSupOK': 1, 'dualSup-ASupBAD': 4, 'dualSup-BSupBAD': 3.
                             fEthernetCageType 1.3.6.1.4.1.260.1.2.4.2.1.14 integer read-only
The model number of the fseries chassis the card is is. Enumeration: 'fiveslot-10101': 2, 'twoslot-10100': 1, 'reserved8': 8, 'fiveslotredundant-10102': 3, 'reserved5': 5, 'reserved4': 4, 'reserved7': 7, 'reserved6': 6.
                 fFddi 1.3.6.1.4.1.260.1.2.5
                 fTwx 1.3.6.1.4.1.260.1.2.6
                 rmonAgent 1.3.6.1.4.1.260.1.2.7
                     rmonAgentDescription 1.3.6.1.4.1.260.1.2.7.1 displaystring read-write
The text name for this agent.
                     rmonAgentID 1.3.6.1.4.1.260.1.2.7.2 octet string read-only
The text name for this agent.
                     rmonAgentOOBNumber 1.3.6.1.4.1.260.1.2.7.3 integer read-only
The number of items in connection table
                     rmonAgentOOBTable 1.3.6.1.4.1.260.1.2.7.4 no-access
                         rmonAgentOOBTableEntry 1.3.6.1.4.1.260.1.2.7.4.1 no-access
An entry in the rmonAgentOOBTable.
                             rmonAgentOOBTableIndex 1.3.6.1.4.1.260.1.2.7.4.1.1 integer read-only
The index of this entry.
                             rmonAgentOOBTableDescription 1.3.6.1.4.1.260.1.2.7.4.1.2 displaystring read-write
The text description of this OOB (Out Of Band) table.
                             rmonAgentOOBTableData 1.3.6.1.4.1.260.1.2.7.4.1.3 opaque read-only
An opaque data structure used for management.
                             rmonAgentOOBRawDataCommand 1.3.6.1.4.1.260.1.2.7.4.1.4 octet string read-write
Raw method of sending data on channel.
                     rmonAgentIBNumber 1.3.6.1.4.1.260.1.2.7.5 integer read-only
The number of items in the connection table.
                     rmonAgentIBTable 1.3.6.1.4.1.260.1.2.7.6 no-access
                         rmonAgentIBTableEntry 1.3.6.1.4.1.260.1.2.7.6.1 no-access
An entry in the rmonAgentIBTable.
                             rmonAgentIBTableIndex 1.3.6.1.4.1.260.1.2.7.6.1.1 integer read-only
                             rmonAgentIBTableDescription 1.3.6.1.4.1.260.1.2.7.6.1.2 displaystring read-write
The text description of this IB (In Band) Table.
                             rmonAgentIBNetworkType 1.3.6.1.4.1.260.1.2.7.6.1.3 integer read-only
Enumeration: 'tokenring': 1, 'ethernet': 2, 'fddi': 3.
                             rmonAgentIBSampleInterval 1.3.6.1.4.1.260.1.2.7.6.1.4 counter read-write
                             rmonAgentIBMacFrames 1.3.6.1.4.1.260.1.2.7.6.1.5 counter read-only
                             rmonAgentIBDataFrames 1.3.6.1.4.1.260.1.2.7.6.1.6 counter read-only
                             rmonAgentIBMacBytes 1.3.6.1.4.1.260.1.2.7.6.1.7 counter read-only
                             rmonAgentIBDataBytes 1.3.6.1.4.1.260.1.2.7.6.1.8 counter read-only
                             rmonAgentIBUtilization 1.3.6.1.4.1.260.1.2.7.6.1.9 counter read-only
                             rmonAgentIBMACUtilization 1.3.6.1.4.1.260.1.2.7.6.1.10 counter read-only
                             rmonAgentIBNonMACUtilization 1.3.6.1.4.1.260.1.2.7.6.1.11 counter read-only
                             rmonAgentIBMACData0 1.3.6.1.4.1.260.1.2.7.6.1.12 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData1 1.3.6.1.4.1.260.1.2.7.6.1.13 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData2 1.3.6.1.4.1.260.1.2.7.6.1.14 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData3 1.3.6.1.4.1.260.1.2.7.6.1.15 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData4 1.3.6.1.4.1.260.1.2.7.6.1.16 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData5 1.3.6.1.4.1.260.1.2.7.6.1.17 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData6 1.3.6.1.4.1.260.1.2.7.6.1.18 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData7 1.3.6.1.4.1.260.1.2.7.6.1.19 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData8 1.3.6.1.4.1.260.1.2.7.6.1.20 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData9 1.3.6.1.4.1.260.1.2.7.6.1.21 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData10 1.3.6.1.4.1.260.1.2.7.6.1.22 opaque read-only
An opaque data structure used for management.
                             rmonAgentIBMACData11 1.3.6.1.4.1.260.1.2.7.6.1.23 opaque read-only
An opaque data structure used for management.
                     rmonAgentMonitorCommand 1.3.6.1.4.1.260.1.2.7.7 displaystring read-write
A method of sending raw commands to the agent monitor.
                     rmonAgentMonitorResponse 1.3.6.1.4.1.260.1.2.7.8 displaystring read-only
This parameter contains the text response to an agent monitor command.
                     rmonAgentDownloadData 1.3.6.1.4.1.260.1.2.7.9 octet string read-write
                     rmonAgentNoMapOid 1.3.6.1.4.1.260.1.2.7.10 object identifier read-write
                     rmonAgentMACStatTable 1.3.6.1.4.1.260.1.2.7.11 no-access
                           rmonAgentMACStatTableEntry 1.3.6.1.4.1.260.1.2.7.11.1 no-access
An entry in the rmonAgentIBTable.
                               rmonAgentMACStatTableData 1.3.6.1.4.1.260.1.2.7.11.1.1 opaque read-only
An opaque data structure used for management.
                     rmonAgentIPAdressControl 1.3.6.1.4.1.260.1.2.7.12 opaque read-write
An opaque data structure used for management.
             stackable 1.3.6.1.4.1.260.1.3
                 stackableHubs 1.3.6.1.4.1.260.1.3.1
                     stackableHubNumber 1.3.6.1.4.1.260.1.3.1.1 integer read-only
The number of items in hub table
                     stackableHubTable 1.3.6.1.4.1.260.1.3.1.2 no-access
A table which maintains a list of all of the intelligent stackable series hubs on the ring being managed by the addressed agent. This table is indexed by the RS485 OOB address of the stackable series intelligent hubs.
                         stackableHubTableEntry 1.3.6.1.4.1.260.1.3.1.2.1 no-access
An entry in the stackableHubTable.
                             stackableHubTableIndex 1.3.6.1.4.1.260.1.3.1.2.1.1 integer read-only
The index for this hub entry
                             stackableHubModel 1.3.6.1.4.1.260.1.3.1.2.1.2 integer read-only
The model number of the stackable series hub being managed. Enumeration: 'standard-issue': 1.
                             stackableHub485Address 1.3.6.1.4.1.260.1.3.1.2.1.3 octet string read-only
The 6 hex digit address used on the RS485 serial OOB management channel.
                             stackableHubRiFTolState 1.3.6.1.4.1.260.1.3.1.2.1.4 integer read-write
This parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             stackableHubRiMask 1.3.6.1.4.1.260.1.3.1.2.1.5 integer read-write
Administrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             stackableHubRiPhDet 1.3.6.1.4.1.260.1.3.1.2.1.6 integer read-only
This parameter describes the phantom detect status for this Ring In port. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             stackableHubRiNsrtStatus 1.3.6.1.4.1.260.1.3.1.2.1.7 integer read-only
Insertion status for this Ring In port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             stackableHubRiBcnRemStatus 1.3.6.1.4.1.260.1.3.1.2.1.8 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             stackableHubRiNeighborType 1.3.6.1.4.1.260.1.3.1.2.1.9 integer read-only
This parameter indicates the type of nearest neighbor on the Ring In port. Enumeration: 'stackable': 5, 'none': 4, 'series828': 1, 'fSeries': 2, 'tokenRingMAC': 3.
                             stackableHubRiNeighborAddr 1.3.6.1.4.1.260.1.3.1.2.1.10 octet string read-only
The address of the nearest neighbor on the Ring In port.
                             stackableHubRiTimeStamp 1.3.6.1.4.1.260.1.3.1.2.1.11 timeticks read-only
The time the status of Ring In (was) last changed.
                             stackableHubRoFTolState 1.3.6.1.4.1.260.1.3.1.2.1.12 integer read-write
This parameter controls the Ring Out(RO) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             stackableHubRoMask 1.3.6.1.4.1.260.1.3.1.2.1.13 integer read-write
Administrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             stackableHubRoPhDet 1.3.6.1.4.1.260.1.3.1.2.1.14 integer read-only
This parameter describes the phantom detect status for this Ring Out port. Enumeration: 'wireFault': 1, 'phantOk': 2.
                             stackableHubRoNsrtStatus 1.3.6.1.4.1.260.1.3.1.2.1.15 integer read-only
Insertion status for this Ring Out port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             stackableHubRoBcnRemStatus 1.3.6.1.4.1.260.1.3.1.2.1.16 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             stackableHubRoNeighborType 1.3.6.1.4.1.260.1.3.1.2.1.17 integer read-only
This parameter indicates the type of nearest neighbor on the Ring Out port. Enumeration: 'stackable': 5, 'none': 4, 'series828': 1, 'fSeries': 2, 'tokenRingMAC': 3.
                             stackableHubRoNeighborAddr 1.3.6.1.4.1.260.1.3.1.2.1.18 octet string read-only
The address of the nearest neighbor on the Ring Out port.
                             stackableHubRoTimeStamp 1.3.6.1.4.1.260.1.3.1.2.1.19 timeticks read-only
The time the status of Ring Out (was) last changed.
                             stackableHubDataRateState 1.3.6.1.4.1.260.1.3.1.2.1.20 integer read-write
This parameter indicates the current data rate of this unit. Enumeration: 's4Mbps': 1, 's16Mbps': 2, 'autoConfig': 3.
                             stackableHubDataRateTimeStamp 1.3.6.1.4.1.260.1.3.1.2.1.21 timeticks read-only
The time the data rate status (was) last changed.
                             stackableHubMgmtStatus 1.3.6.1.4.1.260.1.3.1.2.1.22 integer read-only
The operational status of this unit. Enumeration: 'down': 2, 'operational': 1.
                             stackableHubProxyAgentID 1.3.6.1.4.1.260.1.3.1.2.1.23 octet string read-only
The physical layer MAC Address of the agent.
                             stackableHubAttachedAgentType 1.3.6.1.4.1.260.1.3.1.2.1.24 integer read-only
The type of the attached agent. Enumeration: 'tokenring': 1, 'none': 4, 'reserved': 3, 'tokenring-ethernet': 2.
                             stackableHubAttachedAgentState 1.3.6.1.4.1.260.1.3.1.2.1.25 integer read-write
The state of the attached agent. Enumeration: 'disabled': 2, 'enabled': 1, 'not-applicable': 3.
                             stackableHubTemperatureStatus 1.3.6.1.4.1.260.1.3.1.2.1.26 integer read-only
The temperature status of this unit. Enumeration: 'bad': 2, 'ok': 1.
                             stackableHubAutoRecovControl 1.3.6.1.4.1.260.1.3.1.2.1.27 integer read-write
This parameter controls the auto recovery operation of this unit. Enumeration: 'disabled': 2, 'reset': 3, 'enabled': 1, 'unknown': 4.
                             stackableHubAutoRecovRetries 1.3.6.1.4.1.260.1.3.1.2.1.28 integer read-write
The number of Auto Recoveries performed by this unit.
                             stackableHubCodeVersion 1.3.6.1.4.1.260.1.3.1.2.1.29 octet string read-only
The firmware version number of this unit.
                             stackableHubAutoRecovState 1.3.6.1.4.1.260.1.3.1.2.1.30 integer read-only
The auto recovery state of this unit. Enumeration: 'in-recovery': 1, 'halted': 3, 'normal': 2.
                             stackableHubRawCommandData 1.3.6.1.4.1.260.1.3.1.2.1.31 octet string read-write
This is used to send raw 485 serial data to this unit.
                             stackableHubAutoRecovMode 1.3.6.1.4.1.260.1.3.1.2.1.32 integer read-write
This parameter describes the auto recovery mode. Enumeration: 'selfEnabling': 1, 'non-selfEnabling': 2.
                     stackableHubLobeNumber 1.3.6.1.4.1.260.1.3.1.3 integer read-only
The number of items in the hub lobe table.
                     stackableHubLobeTable 1.3.6.1.4.1.260.1.3.1.4 no-access
A table which contains the control and status information for the lobes.
                         stackableHubLobeEntry 1.3.6.1.4.1.260.1.3.1.4.1 no-access
A collection of control and status parameters kept for each lobe.
                             stackableHubIndex 1.3.6.1.4.1.260.1.3.1.4.1.1 integer read-only
The index into the stackableHubTable of the mau this lobe is on.
                             stackableHubLobePort 1.3.6.1.4.1.260.1.3.1.4.1.2 integer read-only
The port of the mau this lobe is on.
                             stackableHubLobePhDet 1.3.6.1.4.1.260.1.3.1.4.1.3 integer read-only
Phantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             stackableHubLobeMask 1.3.6.1.4.1.260.1.3.1.4.1.4 integer read-write
Administrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port. Enumeration: 'enabled': 2, 'isolated': 1.
                             stackableHubLobeNsrtStatus 1.3.6.1.4.1.260.1.3.1.4.1.5 integer read-only
Actual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring. Enumeration: 'bypassed': 1, 'inserted': 2.
                             stackableHubLobeMacAddr 1.3.6.1.4.1.260.1.3.1.4.1.6 octet string read-only
The MAC layer address of the station which is attached to the corresponding lobe port.
                             stackableHubLobeBcnRemStatus 1.3.6.1.4.1.260.1.3.1.4.1.7 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'unknown': 3, 'ok': 1.
                             stackableHubLobeBcnRemCause 1.3.6.1.4.1.260.1.3.1.4.1.8 integer read-only
This parameter describes the cause of any automatic beacon removal operations performed by the agent on this port. Enumeration: 'no-removal': 1, 'no-carrier': 3, 'phantom-error': 2, 'bad-rate': 4, 'unknown': 5.
                             stackableHubLobeTimeStamp 1.3.6.1.4.1.260.1.3.1.4.1.9 timeticks read-only
The time the status of this lobe (was) last changed.
                 superStackHubs 1.3.6.1.4.1.260.1.3.2
                     superStackHubNumber 1.3.6.1.4.1.260.1.3.2.1 integer read-only
The number of items in hub table
                     superStackHubTable 1.3.6.1.4.1.260.1.3.2.2 no-access
A table which maintains a list of all of the intelligent superStack series hubs on the ring being managed by the addressed agent. This table is indexed by the RS485 OOB address of the superStack series intelligent hubs.
                         superStackHubTableEntry 1.3.6.1.4.1.260.1.3.2.2.1 no-access
An entry in the superStackHubTable.
                             superStackHubTableIndex 1.3.6.1.4.1.260.1.3.2.2.1.1 integer read-only
The index for this hub entry
                             superStackHubModel 1.3.6.1.4.1.260.1.3.2.2.1.2 integer read-only
The model number of the superStack series hub being managed. Enumeration: 'active-12-port-base-ma': 1, 'active-24-port-expansion-ma': 2.
                             superStackHub485Address 1.3.6.1.4.1.260.1.3.2.2.1.3 octet string read-only
The 6 hex digit address used on the RS485 serial OOB management channel.
                             superStackHubStackPosition 1.3.6.1.4.1.260.1.3.2.2.1.4 integer read-only
The integer position in a stack of units. The top position is 1.
                             superStackRiConfiguration 1.3.6.1.4.1.260.1.3.2.2.1.5 integer read-only
This parameter describes the physical configured state of Ring In. Ring In is disabled if there is another Ring In within the cascaded stack of hubs. Enumeration: 'no-ring-in-configured': 1, 'fiber-ring-in-configured': 3, 'copper-ring-in-configured': 2, 'copper-ring-in-disabled': 4, 'fiber-ring-in-disabled': 5.
                             superStackHubRiFTolState 1.3.6.1.4.1.260.1.3.2.2.1.6 integer read-write
This parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RI interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RI interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             superStackHubRiMask 1.3.6.1.4.1.260.1.3.2.2.1.7 integer read-write
Administrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             superStackHubRiPhDet 1.3.6.1.4.1.260.1.3.2.2.1.8 integer read-only
This parameter describes the phantom detect status for this Ring In port. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             superStackHubRiNsrtStatus 1.3.6.1.4.1.260.1.3.2.2.1.9 integer read-only
Insertion status for this Ring In port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             superStackHubRiBcnRemStatus 1.3.6.1.4.1.260.1.3.2.2.1.10 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             superStackRoConfiguration 1.3.6.1.4.1.260.1.3.2.2.1.11 integer read-only
This parameter describes the physical configured state of Ring Out. Ring Out is disabled if there is another Ring Out within the cascaded stack of hubs. Enumeration: 'copper-ring-out-configured': 2, 'fiber-ring-out-configured': 3, 'fiber-ring-out-disabled': 5, 'copper-ring-out-disabled': 4, 'no-ring-out-configured': 1.
                             superStackHubRoFTolState 1.3.6.1.4.1.260.1.3.2.2.1.12 integer read-write
This parameter controls the Ring Out(RO) fault tolerance behavior. Off(1) means that phantom current is not used on the corresponding RO interface as a condition for main ring link insertion. On (2) means tha phantom current is used on the corresponding RO interface as a condition for main ring link insertion. The preferred setting for this parameter is on (2). Enumeration: 'on': 2, 'off': 1.
                             superStackHubRoMask 1.3.6.1.4.1.260.1.3.2.2.1.13 integer read-write
Administrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             superStackHubRoPhDet 1.3.6.1.4.1.260.1.3.2.2.1.14 integer read-only
This parameter describes the phantom detect status for this Ring Out port. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             superStackHubRoNsrtStatus 1.3.6.1.4.1.260.1.3.2.2.1.15 integer read-only
Insertion status for this Ring Out port. Enumeration: 'bypassed': 1, 'inserted': 2.
                             superStackHubRoBcnRemStatus 1.3.6.1.4.1.260.1.3.2.2.1.16 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             superStackHubCascadeUpMask 1.3.6.1.4.1.260.1.3.2.2.1.17 integer read-write
Administrative status for this Cascade Up connection. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             superStackHubCascadeUpPhDet 1.3.6.1.4.1.260.1.3.2.2.1.18 integer read-only
This parameter describes the phantom detect status for this Cascade Up connection. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             superStackHubCascadeUpNsrtStatus 1.3.6.1.4.1.260.1.3.2.2.1.19 integer read-only
Insertion status for this Cascade Up connection. Enumeration: 'bypassed': 1, 'inserted': 2.
                             superStackHubCascadeUpBcnRemStatus 1.3.6.1.4.1.260.1.3.2.2.1.20 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             superStackHubCascadeDownMask 1.3.6.1.4.1.260.1.3.2.2.1.21 integer read-write
Administrative status for this Cascade Down connection. By setting this parameter, a remote manager can control the partitioning of this port. Enumeration: 'enable': 2, 'isolate': 1.
                             superStackHubCascadeDownPhDet 1.3.6.1.4.1.260.1.3.2.2.1.22 integer read-only
This parameter describes the phantom detect status for this Cascade Down connection. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             superStackHubCascadeDownNsrtStatus 1.3.6.1.4.1.260.1.3.2.2.1.23 integer read-only
Insertion status for this Cascade Down connection. Enumeration: 'bypassed': 1, 'inserted': 2.
                             superStackHubCascadeDownBcnRemStatus 1.3.6.1.4.1.260.1.3.2.2.1.24 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'ok': 1.
                             superStackHubDataRateState 1.3.6.1.4.1.260.1.3.2.2.1.25 integer read-write
This parameter indicates the current data rate of this unit. Enumeration: 's4Mbps': 1, 's16Mbps': 2, 'autoConfig': 3.
                             superStackHubDeviceTimeStamp 1.3.6.1.4.1.260.1.3.2.2.1.26 timeticks read-only
The time the data rate status (was) last changed.
                             superStackHubMgmtStatus 1.3.6.1.4.1.260.1.3.2.2.1.27 integer read-only
The operational status of this unit. Enumeration: 'down': 2, 'operational': 1.
                             superStackHubProxyAgentID 1.3.6.1.4.1.260.1.3.2.2.1.28 octet string read-only
The physical layer MAC Address of the agent.
                             superStackHubAttachedAgentType 1.3.6.1.4.1.260.1.3.2.2.1.29 integer read-only
The type of the attached agent. Enumeration: 'none': 1, 'basic-68000': 3, 'unknown': 2, 'advanced-960': 4, 'reserved5': 9, 'reserved4': 8, 'reserved1': 5, 'reserved3': 7, 'reserved2': 6.
                             superStackHubAttachedAgentState 1.3.6.1.4.1.260.1.3.2.2.1.30 integer read-only
The state of the attached agent. Enumeration: 'normal': 2, 'agent-MAC-mgmt-isolated': 7, 'management-disabled': 4, 'duplicate-detected': 3, 'hardware-faulted': 5, 'not-applicable': 1, 'reserved5': 12, 'reserved4': 11, 'reserved2': 9, 'reserved1': 8, 'reserved3': 10, 'agent-MAC-auto-isolated': 6.
                             superStackHubAttachedAgentControl 1.3.6.1.4.1.260.1.3.2.2.1.31 integer read-write
This parameter allows control of the agent. Disabling the agent causes it to stop communicating (via the cascade) with other devices but it still allows for insertion of the MAC. The enable/isolate-MAC-insertion commands cause the agents MAC to be inserted or looped back respectively. this unit. Enumeration: 'read-value': 5, 'enable': 1, 'isolate-MAC-insertion': 4, 'disable': 2, 'enable-MAC-insertion': 3.
                             superStackHubTemperatureStatus 1.3.6.1.4.1.260.1.3.2.2.1.32 integer read-only
The temperature status of this unit. Enumeration: 'bad': 2, 'ok': 1.
                             superStackHubPowerStatus 1.3.6.1.4.1.260.1.3.2.2.1.33 integer read-only
The power status of this unit. Enumeration: 'normal-AC-power': 1, 'non-redundant-DC-power': 3, 'normal-redundant-DC-power': 2.
                             superStackHubAutoRecovControl 1.3.6.1.4.1.260.1.3.2.2.1.34 integer read-write
This parameter controls the auto recovery operation of this unit. Enumeration: 'disabled': 2, 'reset': 3, 'enabled': 1, 'unknown': 4.
                             superStackHubAutoRecovRetries 1.3.6.1.4.1.260.1.3.2.2.1.35 integer read-write
The number of Auto Recoveries performed by this unit.
                             superStackHubCodeVersion 1.3.6.1.4.1.260.1.3.2.2.1.36 octet string read-only
The firmware version number of this unit.
                             superStackHubAutoRecovState 1.3.6.1.4.1.260.1.3.2.2.1.37 integer read-only
The current auto recovery state of this unit. Enumeration: 'in-recovery': 1, 'halted': 3, 'normal': 2.
                             superStackHubRawCommandData 1.3.6.1.4.1.260.1.3.2.2.1.38 octet string read-write
This is used to send raw 485 serial data to this unit.
                             superStackHubAutoRecovMode 1.3.6.1.4.1.260.1.3.2.2.1.39 integer read-write
This parameter describes the auto recovery mode. Enumeration: 'selfEnabling': 1, 'non-selfEnabling': 2.
                             superStackHubRouterPortPhDet 1.3.6.1.4.1.260.1.3.2.2.1.40 integer read-only
Phantom current status for the router port on rear. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             superStackHubRouterPortMask 1.3.6.1.4.1.260.1.3.2.2.1.41 integer read-write
Administrative status for the router port on rear. By setting this parameter, a remote manager can control access to the lobe port. Enumeration: 'enabled': 2, 'isolated': 1.
                             superStackHubRouterPortNsrtStatus 1.3.6.1.4.1.260.1.3.2.2.1.42 integer read-only
Actual insertion status for the router port on rear. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring. Enumeration: 'bypassed': 1, 'inserted': 2.
                             superStackHubRouterPortMacAddr 1.3.6.1.4.1.260.1.3.2.2.1.43 octet string read-only
The MAC layer address of the station which is attached to the router port on rear.
                             superStackHubRouterPortBcnRemStatus 1.3.6.1.4.1.260.1.3.2.2.1.44 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on the router port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'unknown': 3, 'ok': 1.
                             superStackHubRouterPortBcnRemCause 1.3.6.1.4.1.260.1.3.2.2.1.45 integer read-only
This parameter describes the cause of any automatic beacon removal operations performed by the agent on this port. Enumeration: 'no-removal': 1, 'no-carrier': 3, 'phantom-error': 2, 'bad-rate': 4, 'unknown': 5.
                     superStackHubLobeNumber 1.3.6.1.4.1.260.1.3.2.3 integer read-only
The number of items in the hub lobe table.
                     superStackHubLobeTable 1.3.6.1.4.1.260.1.3.2.4 no-access
A table which contains the control and status information for the lobes.
                         superStackHubLobeEntry 1.3.6.1.4.1.260.1.3.2.4.1 no-access
A collection of control and status parameters kept for each lobe.
                             superStackHubIndex 1.3.6.1.4.1.260.1.3.2.4.1.1 integer read-only
The index into the superStackHubTable of the mau this lobe is on.
                             superStackHubLobePort 1.3.6.1.4.1.260.1.3.2.4.1.2 integer read-only
The port of the mau this lobe is on.
                             superStackHubLobeConfig 1.3.6.1.4.1.260.1.3.2.4.1.3 integer read-only
The hardware configuration of the port. Enumeration: 'user-normal': 1, 'unknown': 4, 'ring-in-unused': 3, 'ring-out-unused': 2.
                             superStackHubLobePhDet 1.3.6.1.4.1.260.1.3.2.4.1.4 integer read-only
Phantom current status for this lobe port. A value of 1 corresponds to no phantom current detected. A value of 2 corresponds to phantom presence. Enumeration: 'phantDetected': 2, 'noPhantom': 1.
                             superStackHubLobeMask 1.3.6.1.4.1.260.1.3.2.4.1.5 integer read-write
Administrative status for this lobe port. By setting this parameter, a remote manager can control access to the lobe port. Enumeration: 'enabled': 2, 'isolated': 1.
                             superStackHubLobeNsrtStatus 1.3.6.1.4.1.260.1.3.2.4.1.6 integer read-only
Actual insertion status for this lobe port. A 1 value means that the corresponding station is not connected to the ring. A 2 value means that the corresponding station is connected to the ring. Enumeration: 'bypassed': 1, 'inserted': 2.
                             superStackHubLobeMacAddr 1.3.6.1.4.1.260.1.3.2.4.1.7 octet string read-only
The MAC layer address of the station which is attached to the corresponding lobe port.
                             superStackHubLobeBcnRemStatus 1.3.6.1.4.1.260.1.3.2.4.1.8 integer read-only
This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic beacon removal operations consist of agent-initiated isolation of a lobe port in order to remove the cause of a persistent beaconing condition. Enumeration: 'autoIsolated': 2, 'unknown': 3, 'ok': 1.
                             superStackHubLobeBcnRemCause 1.3.6.1.4.1.260.1.3.2.4.1.9 integer read-only
This parameter describes the cause of any automatic beacon removal operations performed by the agent on this port. Enumeration: 'no-removal': 1, 'no-carrier': 3, 'phantom-error': 2, 'bad-rate': 4, 'unknown': 5.
         maintenance 1.3.6.1.4.1.260.2
             managers 1.3.6.1.4.1.260.2.1
                 mgrNumber 1.3.6.1.4.1.260.2.1.1 integer read-only
The number of managers in the manager table.
                 mgrAutoAdd 1.3.6.1.4.1.260.2.1.2 integer read-write
This variable indicates whether any manager that communicates with the agent should be added to the manager table. Enumeration: 'disabled': 2, 'enabled': 1.
                 mgrAutoAge 1.3.6.1.4.1.260.2.1.3 integer read-write
When mgrAutoAdd is enabled, this variable then indicates whether manager entries should be deleted after 'mgrAgeInterval' ticks. This variable has no effect when mgrAutoAdd is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 mgrAgeInterval 1.3.6.1.4.1.260.2.1.4 timeticks read-write
This is the aging interval.
                 mgrTable 1.3.6.1.4.1.260.2.1.5 no-access
A list of managers.
                     mgrEntry 1.3.6.1.4.1.260.2.1.5.1 no-access
A manager entry.
                         mgrIndex 1.3.6.1.4.1.260.2.1.5.1.1 integer read-write
The Index number of the Manager Entry.
                         mgrIpAddr 1.3.6.1.4.1.260.2.1.5.1.2 ipaddress read-write
The IP address of the manager.
                         mgrCommunity 1.3.6.1.4.1.260.2.1.5.1.3 displaystring read-write
The Community of the manager.
                         mgrTimeStamp 1.3.6.1.4.1.260.2.1.5.1.4 timeticks read-write
Time of last communication with the manager.
                         mgrStatus 1.3.6.1.4.1.260.2.1.5.1.5 integer read-write
The Status of this Entry. Enumeration: 'valid': 1, 'invalid': 2.
                         mgrPhysAddr 1.3.6.1.4.1.260.2.1.5.1.6 octet string read-write
The physical address of the manager entry.
                         mgrInterfaceIndex 1.3.6.1.4.1.260.2.1.5.1.7 integer read-write
The Interface Index of the manager entry.
             versions 1.3.6.1.4.1.260.2.2
                 versionHardware 1.3.6.1.4.1.260.2.2.1 octet string read-only
The Version of hardware release.
                 versionEPROMFirmware 1.3.6.1.4.1.260.2.2.2 octet string read-only
The Version of EPROM release.
                 versionFLASHFirmware 1.3.6.1.4.1.260.2.2.3 octet string read-only
The Version of FLASH release.
             configuration 1.3.6.1.4.1.260.2.3
                 configEPROMSize 1.3.6.1.4.1.260.2.3.1 integer read-only
The Quantity of EPROM installed (number of bytes).
                 configFLASHSize 1.3.6.1.4.1.260.2.3.2 integer read-only
The Quantity of FLASH installed (number of bytes).
                 configFLASHCount 1.3.6.1.4.1.260.2.3.3 integer read-only
The Quantity of FLASH installed (number of ICs).
                 configDRAMSize 1.3.6.1.4.1.260.2.3.4 integer read-only
The Quantity of DRAM installed (number of bytes).
                 configDRAMCount 1.3.6.1.4.1.260.2.3.5 integer read-only
The Quantity of DRAM installed (number of SIMMs).
                 configRS232Number 1.3.6.1.4.1.260.2.3.6 integer read-only
The Number of RS-232 ports in the RS-232 port table.
                 configRS232PortTable 1.3.6.1.4.1.260.2.3.7 no-access
A list of port entries. The number of entries is given by the value of configRS232Number.
                     configRS232PortEntry 1.3.6.1.4.1.260.2.3.7.1 no-access
Status and parameter values for a port.
                         configRS232PortIndex 1.3.6.1.4.1.260.2.3.7.1.1 integer read-only
A unique value for each port.
                         configRS232PortName 1.3.6.1.4.1.260.2.3.7.1.2 displaystring read-only
A text description of the port, i.e. COM1.
                         configRS232BaudRate 1.3.6.1.4.1.260.2.3.7.1.3 integer read-write
The baudrate at which the port is operating. Enumeration: 'b9600': 4, 'b1200': 1, 'b2400': 2, 'b38400': 6, 'b19200': 5, 'b4800': 3.
                         configRS232ModemStatus 1.3.6.1.4.1.260.2.3.7.1.4 integer read-only
The current status of the modem port connection. Enumeration: 'modemDetected': 1, 'noModemDetected': 3, 'autobauding': 2.
                         configRS232ConnectionStatus 1.3.6.1.4.1.260.2.3.7.1.5 integer read-only
The current status of the modem data connection. Enumeration: 'unknown': 3, 'connected': 1, 'connectionWait': 2.
                         configRS232ModemConfigString 1.3.6.1.4.1.260.2.3.7.1.6 displaystring read-write
A user-configurable ASCII string used to initialize a modem on this port. If this string is set to Z, the Star-Tek Agent sends ATZ to the modem during configuration.
                         configRS232OutputData 1.3.6.1.4.1.260.2.3.7.1.7 octet string read-write
Raw data to be sent out this port. Data can only be sent if the ConnectionStatus is connectionWait.
                         configRS232InputData 1.3.6.1.4.1.260.2.3.7.1.8 octet string read-only
The response, if any, to the output data.
                         configRS232HardwareFlowControl 1.3.6.1.4.1.260.2.3.7.1.9 integer read-write
Controls the use of RTS-CTS hardware flow control during modem connections. Enumeration: 'disabled': 1, 'enabled': 2.
                 configMonitorMode 1.3.6.1.4.1.260.2.3.8 integer read-write
The mode of operation of the monitor port. The monitor port is COM2 (if present, COM1 if not). Enumeration: 'monitor': 1, 'slip': 2.
                 configMonitorInput 1.3.6.1.4.1.260.2.3.9 integer read-write
Controls whether the monitor function will accept input. Enumeration: 'disabled': 2, 'enabled': 1.
                 configMonitorDiags 1.3.6.1.4.1.260.2.3.10 integer read-write
Controls whether the monitor function will produce diagnostic output. Enumeration: 'disabled': 2, 'enabled': 1.
                 configParseControl 1.3.6.1.4.1.260.2.3.11 integer read-write
Controls the degree to which frames are copied and parsed. Under high network loads this control can be used to prevent agent overload. Enumeration: 'parseNone': 4, 'parseMost': 2, 'parseAll': 1, 'parseLess': 3.
                 configBootSource 1.3.6.1.4.1.260.2.3.12 integer read-only
Describes where the agent is executing code from. Enumeration: 'flash': 2, 'eprom': 1.
             security 1.3.6.1.4.1.260.2.4
                 securityControl 1.3.6.1.4.1.260.2.4.1 integer read-write
This controls whether security is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 securityMacAddressTable 1.3.6.1.4.1.260.2.4.2 no-access
A table which maintains a list of MacAddresses which are from the local ring, along with a control field which specifies whether it is allowed or disallowed access to the local ring and a counter which tracks the number of times that address has been disallowed access to the ring.
                     securityMacAddressTableEntry 1.3.6.1.4.1.260.2.4.2.1 no-access
An entry in the securityMacAddressTable.
                         securityMacAddress 1.3.6.1.4.1.260.2.4.2.1.1 octet string read-write
The Token Ring Mac Address for this entry.
                         securityStatus 1.3.6.1.4.1.260.2.4.2.1.2 integer read-write
Specifies whether this address is allowed or disallowed to be on the local ring. Enumeration: 'disallowed': 2, 'allowed': 1.
                         securityLockoutCount 1.3.6.1.4.1.260.2.4.2.1.3 counter read-only
The number of times this address was disallowed on the local ring.
             recovery 1.3.6.1.4.1.260.2.5
                 recoveryControl 1.3.6.1.4.1.260.2.5.1 integer read-write
This variable controls whether or not this agent will Accelerate the token-ring recovery process. Enabled by default. Enumeration: 'disabled': 1, 'enabled': 2.
                 recovery828Support 1.3.6.1.4.1.260.2.5.2 integer read-write
This variable controls whether this agent will perform Accelerated Recovery on model 828 devices. Disabled by default. Enumeration: 'disabled': 1, 'enabled': 2.
                 recoveryRetryLimit 1.3.6.1.4.1.260.2.5.3 integer read-write
This variable controls the maximum number of Accelerated Recovery events that will be attempted within recoveryRetryTimePeriod seconds of each other.
                 recoveryRetryTimePeriod 1.3.6.1.4.1.260.2.5.4 integer read-write
The number of seconds which must elapse between Recovery events in order for them to be considered non-related and non-limited.
         rmonextns 1.3.6.1.4.1.260.4
             stationstatistics 1.3.6.1.4.1.260.4.1
             stationhistory 1.3.6.1.4.1.260.4.2
                 trHistoryTable 1.3.6.1.4.1.260.4.2.1 no-access
A list of Token Ring history entries.
                     trHistoryEntry 1.3.6.1.4.1.260.4.2.1.1 no-access
An historical sample of Token Ring statistics on a particular Token Ring interface (on a per station basis). This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples.
                         trHistoryIndex 1.3.6.1.4.1.260.4.2.1.1.1 integer read-only
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
                         trHistorySampleIndex 1.3.6.1.4.1.260.4.2.1.1.2 integer read-only
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
                         trHistoryIntervalStart 1.3.6.1.4.1.260.4.2.1.1.3 timeticks read-only
The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
                         trHistoryInPkts 1.3.6.1.4.1.260.4.2.1.1.4 counter read-only
The number of packets (including error packets) received by this station, during this sampling interval.
                         trHistoryOutPkts 1.3.6.1.4.1.260.4.2.1.1.5 counter read-only
The number of packets (including error packets) transmitted by this station, during this sampling interval.
                         trHistoryInOctets 1.3.6.1.4.1.260.4.2.1.1.6 counter read-only
The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) by this station, during this sampling interval.
                         trHistoryOutOctets 1.3.6.1.4.1.260.4.2.1.1.7 counter read-only
The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) by this station, during this sampling interval.
                         trHistoryOutBroadcastPkts 1.3.6.1.4.1.260.4.2.1.1.8 counter read-only
The total number of good packets transmitted on the network that were directed to the broadcast address by this station, during this sampling interval.
                         trHistoryOutMulticastPkts 1.3.6.1.4.1.260.4.2.1.1.9 counter read-only
The total number of good packets transmitted on the network that were directed to a multicast address by this station, during this sampling interval. Note that this number does not include packets addressed to the broadcast address.
                         trHistoryClaimTokenPkts 1.3.6.1.4.1.260.4.2.1.1.10 counter read-only
The total number of Claim Token MAC packets detected by this station during this sampling interval.
                         trHistoryInLineErrors 1.3.6.1.4.1.260.4.2.1.1.11 counter read-only
The total number of line errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryOutLineErrors 1.3.6.1.4.1.260.4.2.1.1.12 counter read-only
The total number of line errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe during this sampling interval.
                         trHistoryInternalErrors 1.3.6.1.4.1.260.4.2.1.1.13 counter read-only
The total number of adapter internal errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryInBurstErrors 1.3.6.1.4.1.260.4.2.1.1.14 counter read-only
The total number of burst errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryOutBurstErrors 1.3.6.1.4.1.260.4.2.1.1.15 counter read-only
The total number of burst errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe, during this sampling interval.
                         trHistoryACErrors 1.3.6.1.4.1.260.4.2.1.1.16 counter read-only
The total number of AC (Address Copied) errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe during this sampling interval.
                         trHistoryAbortErrors 1.3.6.1.4.1.260.4.2.1.1.17 counter read-only
The total number of abort delimiters reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryLostFrameErrors 1.3.6.1.4.1.260.4.2.1.1.18 counter read-only
The total number of lost frame errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryCongestionErrors 1.3.6.1.4.1.260.4.2.1.1.19 counter read-only
The total number of receive congestion errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryFrameCopiedErrors 1.3.6.1.4.1.260.4.2.1.1.20 counter read-only
The total number of frame copied errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryFrequencyErrors 1.3.6.1.4.1.260.4.2.1.1.21 counter read-only
The total number of frequency errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryTokenErrors 1.3.6.1.4.1.260.4.2.1.1.22 counter read-only
The total number of token errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                         trHistoryInBeaconErrors 1.3.6.1.4.1.260.4.2.1.1.23 counter read-only
The total number of beacon frames sent by this station and detected by the probe, during this sampling interval.
                         trHistoryOutBeaconErrors 1.3.6.1.4.1.260.4.2.1.1.24 counter read-only
The total number of beacon frames detected by the probe, that name this station as the NAUN, during this sampling interval.
                         trHistoryInsertions 1.3.6.1.4.1.260.4.2.1.1.25 counter read-only
The number of times the probe detected this station inserting onto the ring during this sampling interval.
                         trHistorySoftErrors 1.3.6.1.4.1.260.4.2.1.1.26 counter read-only
The number of soft errors reported by this station in error reporting packets detected by the probe during this sampling interval.
                 trHistoryOpaqueTable 1.3.6.1.4.1.260.4.2.2 no-access
A list of Token Ring history entries.
                     trHistoryOpaqueEntry 1.3.6.1.4.1.260.4.2.2.1 no-access
An historical sample of Token Ring statistics on a particular Token Ring interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples.
                         trHistoryTableData 1.3.6.1.4.1.260.4.2.2.1.1 opaque read-only
An opaque data structure used for management.
             protocolstatistics 1.3.6.1.4.1.260.4.3
                 protocolData 1.3.6.1.4.1.260.4.3.1 opaque read-only
An opaque data structure used for data retrival.
                 protocolStatsTable 1.3.6.1.4.1.260.4.3.2 no-access
A list of protocol statistics entries.
                     protocolStatsEntry 1.3.6.1.4.1.260.4.3.2.1 no-access
An entry in the protocolStatsTable.
                         protocolIfIndex 1.3.6.1.4.1.260.4.3.2.1.1 integer read-only
The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifindex object, defined in [4,6].
                         protocolID 1.3.6.1.4.1.260.4.3.2.1.2 integer read-only
The value of this object uniquely identifies the protocol whose counters are tracked by this table entry. Enumeration: 'arp': 19, 'llc-individual-mgmt-sap': 22, 'llc-3com-xns-sap': 27, 'reserved68': 68, 'reserved69': 69, 'ip-gcp': 11, 'ip': 9, 'reserved66': 66, 'netware-ipx': 20, 'reserved65': 65, 'ipx-routinginformationpacket': 43, 'reserved62': 62, 'reserved63': 63, 'ncp': 50, 'ip-icmp': 10, 'ipx-netwarecoreprotocol': 48, 'ncp-destroyserviceconnection': 54, 'ip-egp': 13, 'ncp-other': 56, 'sap-generalservicequery': 57, 'ipx-packetexchangeprotocol': 46, 'ncp-requestinprogressresponse': 55, 'ieee8022-llc-protocol': 7, 'dec-lat': 38, 'xerox-3com': 41, 'llc-group-mgmt-sap': 23, 'dix-ethernet-packets': 6, 'reserved64': 64, 'ip-udp': 16, 'sap-nearestserverresponse': 60, 'ieee8022-llc-snap': 8, 'ipx-other': 49, 'sap-generalserviceresponse': 58, 'ip-chaos': 15, 'llc-group-lan-mgmt-sap': 30, 'other-llc-sap': 34, 'llc-null-sap': 21, 'reserved72': 72, 'reserved71': 71, 'reserved70': 70, 'reserved77': 77, 'reserved76': 76, 'reserved75': 75, 'reserved74': 74, 'reserved67': 67, 'chaosnet': 35, 'reserved79': 79, 'unknown-protocols': 2, 'ipx-uknown': 42, 'ieee8025-mac-protocol': 3, 'ipx-sequencedpacketprotocol': 47, 'ieee8025-nonsource-routed-packets': 5, 'llc-netbios-sap': 28, 'llc-startekdiscovery': 61, 'decnet': 37, 'llc-arpanet-ip-sap': 26, 'ncp-reply': 53, 'llc-remote-program-load-sap': 31, 'reserved78': 78, 'reserved82': 82, 'banyan-vines': 36, 'sap-nearestserverquery': 59, 'ieee8025-source-routed-packets': 4, 'llc-iso-network-layer-sap': 32, 'llc-individual-lan-mgmt-sap': 29, 'llc-group-sna-path-ctrl-sap': 25, 'reserved73': 73, 'all-packets': 1, 'ipx-echopacket': 44, 'llc-individual-sna-path-ctrl-sap': 24, 'reserved80': 80, 'reserved81': 81, 'llc-global-sap': 33, 'ip-tp4': 17, 'appletalk': 40, 'ncp-request': 52, 'ip-igp': 14, 'ncp-create': 51, 'ipx-errorpacket': 45, 'ip-other': 18, 'ip-tcp': 12, 'dec-lanbridge': 39.
                         protocolPkts 1.3.6.1.4.1.260.4.3.2.1.3 counter read-only
The number of packets received for this protocol.
                         protocolOctets 1.3.6.1.4.1.260.4.3.2.1.4 counter read-only
The number of octets received for this protocol.