SRAP-WCM-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: SRAP-WCM-MIB
Download as:   
SNMPv2-CONF, A3Com-products-MIB, IF-MIB, SNMPv2-SMI, SRAP-GLOBAL-REG, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 radioTransmitStop 1.3.6.1.4.1.43.0.95
The radio has stopped transmitting due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF hardware issue.
 radioReceiveStop 1.3.6.1.4.1.43.0.96
The radio has stopped receiving due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF hardware issue.
 exceedMaxAssociated 1.3.6.1.4.1.43.0.97
Exceed max 256 Associated clients. No more association of wireless clients allowed. The user can disassociate the idle wirless clients.
 exceedtThresholdAssociated 1.3.6.1.4.1.43.0.98
The number of Wireless Clients association reaches the threshold of the AP. Please check the MIB object, thresholdAssociated. The default is 200. The number of wireless client is more than the value of thresholdAssociated. This will affect the performace of the AP.
 dslSecurityViolation 1.3.6.1.4.1.43.0.99
For Wireless Client, User name or password is not correct in Dynamic Security Link database of AP. The user can check the AP admin if the account exists on the Dynamic Security Link database
           srAPWCMMIBModule 1.3.6.1.4.1.43.35.1.1.5
The 3COM Wireless LAN Products Web Configuration Management MIB Module.
           wcmMIB 1.3.6.1.4.1.43.35.1.7.1
               wcmConf 1.3.6.1.4.1.43.35.1.7.1.1
                   apConfigMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.1
                       apManufactureInfoGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.1
The apManufactureInfo group
                       apSystemConfigGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.2
The apSystemConfig group
                       apSNMPInfoGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.3
The apSNMPInfo group
                       apRFConfigGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.4
The apRFConfig group
                   apPerformMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.2
                       apRFStatisticsGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.1
The apRFStatistics group
                       apEtherItfStatGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.2
The apEtherInfStat group
                       apRFItfStatGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.3
The apRFInfStat group
                       apTrafficMatrixGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.4
The apTrafficMatrix group
                       apDSPerFreqStatTableGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.5
The apDSPerFreqStatTable group
                   apFaultMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.3
                       apFaultMgmtGroup 1.3.6.1.4.1.43.35.1.7.1.1.3.1
The apRFStatistics group
                   apSecurityMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.4
                       apSecurityMgmtGroup 1.3.6.1.4.1.43.35.1.7.1.1.4.1
The apSecurityMgmt group
                   apEventGroups 1.3.6.1.4.1.43.35.1.7.1.1.5
                       wcmNotificationGroup 1.3.6.1.4.1.43.35.1.7.1.1.5.1
The wcm Notifications.
               wcmObjs 1.3.6.1.4.1.43.35.1.7.1.2
                   apConfigMgmt 1.3.6.1.4.1.43.35.1.7.1.2.1
                       apManufactureInfo 1.3.6.1.4.1.43.35.1.7.1.2.1.1
                           apModelnumber 1.3.6.1.4.1.43.35.1.7.1.2.1.1.1 octet string read-only
The Model Number of the ACCESS Point device.
                           apSerialnumber 1.3.6.1.4.1.43.35.1.7.1.2.1.1.2 octet string read-only
The Serial Number of the ACCESS Point system.
                           apMyMacAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.1.3 macaddress read-only
The MAC address of the ACCESS Point.
                           apFirmwareVer 1.3.6.1.4.1.43.35.1.7.1.2.1.1.4 octet string read-only
The current version of the ACCESS Point firmware.
                           apWebUiVer 1.3.6.1.4.1.43.35.1.7.1.2.1.1.5 octet string read-only
The current version of the ACCESS Point WEB Configration System.
                           apMfgDate 1.3.6.1.4.1.43.35.1.7.1.2.1.1.6 octet string read-only
The Date of this ACCESS Point was manufactured.
                           apProductName 1.3.6.1.4.1.43.35.1.7.1.2.1.1.7 octet string read-only
The Product Name of this ACCESS Point.
                           apMfgName 1.3.6.1.4.1.43.35.1.7.1.2.1.1.8 octet string read-only
The Manufacture Name of this ACCESS Point.
                           apHardwareRev 1.3.6.1.4.1.43.35.1.7.1.2.1.1.9 integer read-only
The Hardware Revision of this ACCESS Point.
                       apSystemConfig 1.3.6.1.4.1.43.35.1.7.1.2.1.2
                           apDeviceName 1.3.6.1.4.1.43.35.1.7.1.2.1.2.1 octet string read-write
An ASCII string to identify the Device Name of this ACCESS Point (up to 255 characters).
                           apDeviceLoc 1.3.6.1.4.1.43.35.1.7.1.2.1.2.2 octet string read-write
An ASCII string to identify the Location of this ACCESS Point (up to 255 characters).
                           apHelpFilePath 1.3.6.1.4.1.43.35.1.7.1.2.1.2.3 octet string read-write
An ASCII string to identify the Location of this ACCESS Point (up to 255 characters).
                           apMyIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.2.4 ipaddress read-write
The IP address for the Access Point. It can be set when apStaticIPAddrEnable is set to is enabled.
                           apSubnetMask 1.3.6.1.4.1.43.35.1.7.1.2.1.2.5 ipaddress read-write
The subnet mask for the Access Point. It can be set when apStaticIPAddrEnable is set to enabled.
                           apGatewayIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.2.6 ipaddress read-write
The IP address of the gateway for the Access Point.
                           apAdditionalGatewaysTableLength 1.3.6.1.4.1.43.35.1.7.1.2.1.2.7 integer32 read-only
The maximum number of entries in the Additional Gateways Table.
                           apAdditionalGatewaysTable 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8 no-access
A table of information for additional Gateways. The current number of entries is 4(that mean aditional gateway is 3).
                               apAdditionalGatewaysEntry 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1 no-access
An entry in the table of information for additional gateways for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                                   additionalGatewaysIndex 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.1 integer no-access
Specific Gateway information Table index. Range (1..3).
                                   apAdditionalGatewaysIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.2 ipaddress read-write
The IP address of the Gateway used for this Access Point.
                           apDHCPEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.2.9 integer read-write
Enables/Disables Wireless DHCP mode for the Access Point. Default is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                           apStaticIPAddrEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.2.10 integer read-write
Enables/Disables Static IP of ACCESS Point . Default is disabled(2). Before issuing this command, set 'apMyIPAddr', 'apSubnetMask', and 'apGatewayIPAddr' to the proper values. Enumeration: 'disabled': 2, 'enabled': 1.
                       apSNMPInfo 1.3.6.1.4.1.43.35.1.7.1.2.1.3
                           apSNMPRequests 1.3.6.1.4.1.43.35.1.7.1.2.1.3.1 counter32 read-only
Indicates the number of SNMP requests to this SNMP Agent.
                           apSNMPTraps 1.3.6.1.4.1.43.35.1.7.1.2.1.3.2 counter32 read-only
Indicates the number of Traps that were generated by this SNMP Agent.
                           apAllTrapsEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.3 integer read-write
Enables/Disables all SNMP traps. Default is enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                           apColdBootTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.4 integer read-write
Enables/Disables ACCESS Point Cold Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                           apAuthenFailureTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.5 integer read-write
Enables/Disables authentication failure trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 4. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                           apRFTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.6 integer read-write
Enables/Disables ACCESS Point RF driver startup trap. Default is allTrapHosts(4). This is an a3com enterprise-specific trap. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                           apWarmBootTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.7 integer read-write
Enables/Disables Warm Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                           apWCMaxAssocTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.8 integer read-write
Enables/Disables apWCMaxAssoc Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                           apThresholdAssociatedEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.9 integer read-write
Enables/Disables apThresholdAssociated Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                           dslSecurityViolationEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.10 integer read-write
Enables/Disables dslSecurityViolation Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable MIB variable should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'allTrapHosts': 4, 'trapHost1': 2, 'trapHost2': 3.
                       apRFConfig 1.3.6.1.4.1.43.35.1.7.1.2.1.4
                           apWlanServiceArea 1.3.6.1.4.1.43.35.1.7.1.2.1.4.1 octet string read-write
The WLAN Service Area of the ACCESS Point.
                           apCountryName 1.3.6.1.4.1.43.35.1.7.1.2.1.4.2 octet string read-only
The country for which the ACCESS Point radio is configured. It is set at the factory and may not be altered.
                           apWEPAlgorithm 1.3.6.1.4.1.43.35.1.7.1.2.1.4.3 integer read-only
This attribute is a set of all the shared key WEP algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: open system Value = 2: 40 bit Key Value = 3: 128 bit Key IMPORTANT NOTE: The 128 bit WEP key ENcryption is currently restricted by U.S. laws. Enumeration: 'wep128bShareKey': 3, 'wepSerialAuthenticationwith40bsessionkey': 11, 'wepEAPTLSAuthenticationwith40bsessionkey': 9, 'openSystem': 1, 'wepEAPMD5Authenticationwith128bpasswordsessionkey': 8, 'wepEAPMD5Authenticationwith40bsharedkey': 6, 'wepEAPMD5Authenticationwithnoencryption': 5, 'wepEAPTLSAuthenticationwith128bsessionkey': 10, 'wepEAPMD5Authenticationwith128bsharedkey': 7, 'wep128bpasswordsessionKey': 4, 'wep40bShareKey': 2, 'wepSerialAuthenticationwith128bsessionkey': 12.
                           apShortPreamble 1.3.6.1.4.1.43.35.1.7.1.2.1.4.4 integer read-write
This attribute is a set to enable short preamble for compatibility within the 802.11 community. Setting it to enabled shall result in performance enhancement. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                           apMaxWCTrigger 1.3.6.1.4.1.43.35.1.7.1.2.1.4.5 integer read-write
Indicates the trigger point for sending apWCMaxAssocTrap trap. Range (1..255) The default value is 255.
                           apRadioAutoSense 1.3.6.1.4.1.43.35.1.7.1.2.1.4.6 integer read-write
This attribute is a set to enable Radio Auto Sense. Default is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                           apRadioChannel 1.3.6.1.4.1.43.35.1.7.1.2.1.4.7 integer read-write
This attribute is Radio Channel. This attribute can be written when apRadioAutoSense is disabled.
                           apHighPerformance 1.3.6.1.4.1.43.35.1.7.1.2.1.4.8 integer read-write
This attribute is a set to enable Radio High Performance. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                           apTransmitPower 1.3.6.1.4.1.43.35.1.7.1.2.1.4.9 integer read-write
This attribute is a set the transmit power from 1-100 micro watts. Enumeration: 'high': 1, 'medium': 2, 'low': 3.
                           apRadioAntenna 1.3.6.1.4.1.43.35.1.7.1.2.1.4.10 integer read-write
This attribute is a set the section of radio antenna. Enumeration: 'enabledoneantenna': 1, 'bothantennaon': 2.
                           thresholdAssociated 1.3.6.1.4.1.43.35.1.7.1.2.1.4.11 integer read-write
This attribute is a set the threshold of Associated Wireless Client. The default is 200.
                           apDataRateMgmt 1.3.6.1.4.1.43.35.1.7.1.2.1.4.12 integer read-write
This attribute is automatically or manually set the best data rate . Enumeration: 'auto': 1, 'manual': 2.
                           apDataRate5 1.3.6.1.4.1.43.35.1.7.1.2.1.4.13 integer read-write
This attribute is a set the data rate to 5.5 Mb/sec . Enumeration: 'required': 2, 'optional': 1.
                           apDataRate11 1.3.6.1.4.1.43.35.1.7.1.2.1.4.14 integer read-write
This attribute is a set the data rate to 11.0 Mb/sec . Enumeration: 'required': 2, 'optional': 1.
                   apPerformMgmt 1.3.6.1.4.1.43.35.1.7.1.2.2
                       apRFStatistics 1.3.6.1.4.1.43.35.1.7.1.2.2.1
                           rfTxUcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.1 counter32 read-only
The number of Unicast frames successfully transmitted.
                           rfRxUcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.2 counter32 read-only
The number of Unicast frames successfully received
                           rfTxBcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.3 counter32 read-only
The number of Broadcast frames transmitted
                           rfRxBcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.4 counter32 read-only
The number of Broadcast frames received.
                           rfTxMcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.5 counter32 read-only
The number of Multicast frames transmitted.
                           rfRxMcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.6 counter32 read-only
The number of Multicast frames received.
                           rfTxEncryptFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.7 counter32 read-only
The number of Encrypted frames transmitted.
                           rfRxEncryptFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.8 counter32 read-only
The number of Encrypted frames received.
                           rfTxFragFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.9 counter32 read-only
The number of frames fragments transmitted.
                           rfRxFragFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.10 counter32 read-only
The number of frames fragments received.
                           rfTxBeacons 1.3.6.1.4.1.43.35.1.7.1.2.2.1.11 counter32 read-only
The number of Beacon frames transmitted.
                           rfRxBeacons 1.3.6.1.4.1.43.35.1.7.1.2.2.1.12 counter32 read-only
The number of Beacon frames received.
                           rfTxACK 1.3.6.1.4.1.43.35.1.7.1.2.2.1.13 counter32 read-only
The number of ACK frames transmitted in response to successfully received frames.
                           rfRxACK 1.3.6.1.4.1.43.35.1.7.1.2.2.1.14 counter32 read-only
The number of frames transmitted that had their corresponding ACK frames successfully received frames.
                           rfTxRTS 1.3.6.1.4.1.43.35.1.7.1.2.2.1.15 counter32 read-only
The number of RTS frames that were successfully transmitted.
                           rfRxRTS 1.3.6.1.4.1.43.35.1.7.1.2.2.1.16 counter32 read-only
The number of RTS received frames.
                           rfCTSFailures 1.3.6.1.4.1.43.35.1.7.1.2.2.1.17 counter32 read-only
The number of frames for which no CTS frames was received in response to a RTS frames being sent.
                           rfRxCTS 1.3.6.1.4.1.43.35.1.7.1.2.2.1.18 counter32 read-only
The number of CTS frames received in response to a RTS.
                           rfTxACKFailures 1.3.6.1.4.1.43.35.1.7.1.2.2.1.19 counter32 read-only
The number of frames transmitted that did not have their corresponding ACK packets successfully received.
                           rfTxRetrys 1.3.6.1.4.1.43.35.1.7.1.2.2.1.20 counter32 read-only
The number of frames that were retransmitted.
                           rfFCSErrors 1.3.6.1.4.1.43.35.1.7.1.2.2.1.21 counter32 read-only
The number of frames received with checksum error.
                           rfRxDuplicateFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.22 counter32 read-only
The number of duplicate frames received.
                           rfWEPUndecryptFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.23 counter32 read-only
The number of frames received with the WEP sub-field of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.
                           rfWEPICVErrors 1.3.6.1.4.1.43.35.1.7.1.2.2.1.24 counter32 read-only
The number of frames received with the WEP sub-field of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame.
                       apEtherItfStat 1.3.6.1.4.1.43.35.1.7.1.2.2.2
                           apEtherPacketsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.2.1 counter32 read-only
Indicates the number of good packets received on the Ethernet interface.
                           apEtherPacketsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.2.2 counter32 read-only
Indicates the number of packets successfully transmitted on the Ethernet interface.
                           apEtherOctetsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.2.3 counter32 read-only
Indicates the number of good bytes received on the Ethernet interface.
                           apEtherOctetsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.2.4 counter32 read-only
Indicates the number of bytes successfully transmitted on the Ethernet interface.
                           apEtherPktsInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.5 gauge32 read-only
Indicates the number of good packets per second received on the Ethernet Interface.
                           apEtherPktsOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.6 gauge32 read-only
Indicates the number of packets per second successfully transmitted on the Ethernet interface.
                           apEtherOctInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.7 gauge32 read-only
Indicates the number of good bytes per second received on the Ethernet Interface.
                           apEtherOctOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.8 gauge32 read-only
Indicates the number of bytes per second successfully transmitted on the Ethernet interface.
                       apRFItfStat 1.3.6.1.4.1.43.35.1.7.1.2.2.3
                           apRFFrmsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.3.1 counter32 read-only
Indicates the number of good packets received on the RF interface.
                           apRFFrmsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.3.2 counter32 read-only
Indicates the number of packets successfully transmitted on the RF interface.
                           apRFOctetsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.3.3 counter32 read-only
Indicates the number of good bytes received on the RF interface.
                           apRFOctetsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.3.4 counter32 read-only
Indicates the number of bytes successfully transmitted on the RF interface.
                           apRFFrmsInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.5 gauge32 read-only
Indicates the number of good packets per second received on the RF Interface.
                           apRFFrmsOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.6 gauge32 read-only
Indicates the number of packets per second successfully transmitted on the RF interface.
                           apRFOctInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.7 gauge32 read-only
Indicates the number of good bytes per second received on the RF Interface.
                           apRFOctOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.8 gauge32 read-only
Indicates the number of bytes per second successfully transmitted on the RF interface.
                       apTrafficMatrix 1.3.6.1.4.1.43.35.1.7.1.2.2.4
                           apEnetsNPktsToEnets 1.3.6.1.4.1.43.35.1.7.1.2.2.4.1 counter32 read-only
Indicates the number of packets sent from the Ethernet Interface the Ethernet Interface. Must be 0
                           apRFNPktsToEnets 1.3.6.1.4.1.43.35.1.7.1.2.2.4.2 counter32 read-only
Indicates the number of packets sent from the RF Interface to the Ethernet Interface.
                           apEnetsNPktsToRF 1.3.6.1.4.1.43.35.1.7.1.2.2.4.3 counter32 read-only
Indicates the number of packets sent from Ethernet Interface to the RF Interface.
                           apRFNPktsToRF 1.3.6.1.4.1.43.35.1.7.1.2.2.4.4 counter32 read-only
Indicates the number of packets sent from the RF Interfaceto the RF Interface. Must be 0
                       apDSPerFreqStatTable 1.3.6.1.4.1.43.35.1.7.1.2.2.5 no-access
A table of Radio Per Frequency statistics, which is based on the historical frequency records used by this Access Point. The current number of entries is 78.
                           apDSPerFreqStatEntry 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1 no-access
An entry in the table of Radio per frequency statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                               rfDSFrequency 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.1 integer read-only
Radio Frequency channel number.
                               rfDSPerFqPktsSents 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.2 counter32 read-only
Counter for the packets sent per frequency.
                               rfDSPerFqPktsRcvds 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.3 counter32 read-only
Counter for the packets received per frequency.
                               rfDSPerFqRetries 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.4 counter32 read-only
Counter for the retries per frequency.
                   apFaultMgmt 1.3.6.1.4.1.43.35.1.7.1.2.3
                       apUpdateTemplateStatus 1.3.6.1.4.1.43.35.1.7.1.2.3.1 integer read-only
Reports the Firmware/HTML file download and update status. Enumeration: 'downloadSuccessful': 1, 'tftpUnknownTransferID': 11, 'tftpDiskfullOrAllocationExceeded': 9, 'tftpIllegalTFTPoperation': 10, 'tftpNoSuchUser': 13, 'tftpFileAlreadyExists': 12, 'downloadTimeout': 3, 'downloadUnknownError': 2, 'badFileName': 4, 'badMacAddrForRestoreFile': 5, 'tftpAccessViolation': 8, 'fileDownloadOrUpload': 14, 'incorrectFileImage': 6, 'tftpFileNotFound': 7.
                       apBackupFileName 1.3.6.1.4.1.43.35.1.7.1.2.3.2 octet string read-write
The name of the file to be backuped to the TFTP Server. (Including path name and total up to 255 characters.)
                       apTemplateOperation 1.3.6.1.4.1.43.35.1.7.1.2.3.3 integer read-write
startBackup(1) - Backup the AP configuration through TFTP server. The AP backup configuration, named as apBackupFileName, will be saved in the default location of TFTP server. Before issuing this command, set 'apBackupFileName', and 'apTFTPServer' to the proper values. startTemplate(2) - This allows the network management platform to restore the template configuration of a AP, from one of it's previous backups. It is expected that common Parameters of AP in the backup configuration file, named as apRestoreFileName, will be restored to the AP. Before issuing this command, set 'apRestoreFileName', and 'apTFTPServer' to the proper values. startRestore(3) - This allows the network management platform to restore the full configuration of a AP, from one of it's previous backups. It is expected that full of the data in the backup configuration file, named as apRestoreFileName, will be restored to the AP. Before issuing this command, set 'apRestoreFileName', and 'apTFTPServer' to the proper values. Enumeration: 'downloadingData': 5, 'uploadingData': 4, 'idle': 7, 'startTemplate': 2, 'startBackup': 1, 'startRestore': 3, 'notDownloading': 6.
                       apRestoreFileName 1.3.6.1.4.1.43.35.1.7.1.2.3.4 octet string read-write
The name of the file to be restored to the AP. (Including path name and total up to 255 characters.)
                       apSyslogDstIpAddressTableLength 1.3.6.1.4.1.43.35.1.7.1.2.3.5 integer32 read-only
The maximum number of entries in the Syslog Destination Ip Address Table.
                       apSyslogDstIpAddressTable 1.3.6.1.4.1.43.35.1.7.1.2.3.6 no-access
A table of Syslog Destination Ip Address. The current number of entries is 2.
                           apSyslogDstIpAddressEntry 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1 no-access
An entry in the table of Syslog Destination Ip Address for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                               apSyslogDstIpAddressIndex 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.1 integer no-access
Specific Syslog Destination Ip Address Table index. Range (1..2).
                               apSyslogDstIpAddress 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.2 ipaddress read-write
The IP address of Syslog Destination used for this Access Point.
                       apSyslogEnable 1.3.6.1.4.1.43.35.1.7.1.2.3.7 integer read-write
Enables/Disables syslog for the Access Point. Default is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                   apSecurityMgmt 1.3.6.1.4.1.43.35.1.7.1.2.4
                       apACLViolations 1.3.6.1.4.1.43.35.1.7.1.2.4.1 counter32 read-only
Indicates the number of Access Control violations occurred.
                       apEAPSupport 1.3.6.1.4.1.43.35.1.7.1.2.4.2 integer read-write
The AP supprt the Extensive Authentication Protocol is enabled or disabled. Default is enabled. Enumeration: 'disabled': 1, 'eap': 2, 'serialauth': 3.
                       apAuthServerSupportNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.3 integer32 read-only
The maximum number of entries in the Authenicator Server Table.
                       apKeyServerSupportNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.4 integer32 read-only
The maximum number of entries in the Key Server Table.
                       apAccountServerSupportNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.5 integer32 read-only
The maximum number of entries in the Accounting Server Table.
                       apAuthServerTable 1.3.6.1.4.1.43.35.1.7.1.2.4.6 no-access
A table of information for Authenticator Servers. Now support number of entries is 2.
                           apAuthServerEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1 no-access
An entry in the table of information for Authenticator Servers for this Access Point.
                               apAuthServerIndex 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.1 integer32 no-access
A number uniquely identifying each Authenticator server.
                               apAuthServerIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.2 ipaddress read-write
The IP address of the Authenticator server referred to in this table entry.
                               apAuthServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.3 integer32 read-write
The UDP port the client is using to send requests to this Authenticator server.
                               apAuthSharedSecret 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.4 octet string read-write
This values indicates the shared key used by the authentication server.
                               apAuthServerRetransmit 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.5 integer32 read-write
The number of times the access point tries to authenticate logon access.
                               apAuthServerTimeout 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.6 integer32 read-write
The number of seconds the access point waits for a reply from the RADIUS server before it resends the request
                       apKeyServerTable 1.3.6.1.4.1.43.35.1.7.1.2.4.7 no-access
A table of information for Key Servers. Now support number of entries is 2.
                           apKeyServerEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1 no-access
An entry in the table of information for Key Servers for this Access Point.
                               apKeyServerIndex 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.1 integer32 no-access
A number uniquely identifying each Key server.
                               apKeyServerIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.2 ipaddress read-write
The IP address of the Key server referred to in this table entry.
                               apKeyServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.3 integer32 read-write
The UDP port the client is using to send requests to this server.
                       apAccountServerTable 1.3.6.1.4.1.43.35.1.7.1.2.4.8 no-access
A table of information for Account Servers. Now support number of entries is 1.
                           apAccountServerEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1 no-access
An entry in the table of information for Account Servers for this Access Point.
                               apAccountServerIndex 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.1 integer32 no-access
A number uniquely identifying each Account server.
                               apAccountServerIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.2 ipaddress read-write
The IP address of the Account server referred to in this table entry.
                               apAccountServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.3 integer32 read-write
The UDP port the client is using to send requests to this server.
                               apAccountServerSharedSecret 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.4 octet string read-write
This values indicates the shared key used by the accounting server.
                               apAccountServerRetransmit 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.5 integer32 read-write
The number of times the access point tries to accounting logon access.
                               apAccountServerTimeout 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.6 integer32 read-write
The number of seconds the access point waits for a reply from the RADIUS accounting server before it resends the request
                       apFastReKeying 1.3.6.1.4.1.43.35.1.7.1.2.4.9 integer read-write
The AP supprt the Fast-rekeying is enabled or disabled. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apTFTPServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.10 integer32 read-write
The TFTP Server port.
                       apTFTPRetries 1.3.6.1.4.1.43.35.1.7.1.2.4.11 integer32 read-write
The maximum retries number of tftp client in SRAPEE
                       apTFTPTimeOutInterval 1.3.6.1.4.1.43.35.1.7.1.2.4.12 integer32 read-write
The maximum time out interval of tftp client in SRAPEE
                       apEncryptionTable 1.3.6.1.4.1.43.35.1.7.1.2.4.13 no-access
Conceptual table for Encryption setting of device
                             apEncryptionEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1 no-access
An Entry (conceptual row) in the Encryption Table ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
                                 apEncryptionMode 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.1 integer read-write
The encryption mode that each IEEE 802.11 Interface(apEncryptionMode.ifIndex) is using. Value: 1 = No Encryption 2 = 64 bit WEP 3 = 128 bit WEP 4 = 152 bit WEP 5 = TKIP using WPA-PSK 6 = TKIP using WPA-Enterprise 7 = AES using WPA-PSK 8 = AES using WPA-Enterprise Enumeration: 'tkipWPAPSK': 5, 'wep128b': 3, 'aesWPAPSK': 7, 'none': 1, 'wep152b': 4, 'wep64b': 2, 'aesWPAEnterprise': 8, 'tkipWPAEnterprise': 6.
                                 apWPAPSKPassPhrase 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.2 octet string read-write
A WPA Pre-Share Key Pass Phrase.
                                 apWEPDefaultKeyID 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.3 integer read-write
The WEPDefaultKey N currently being used to encrypt data
                                 apWEPDefaultKey1 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.4 octet string read-write
A WEP default secret key 1 value.
                                 apWEPDefaultKey2 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.5 octet string read-write
A WEP default secret key 2 value.
                                 apWEPDefaultKey3 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.6 octet string read-write
A WEP default secret key 3 value.
                                 apWEPDefaultKey4 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.7 octet string read-write
A WEP default secret key 4 value.
               wcmEvents 1.3.6.1.4.1.43.35.1.7.1.3
                   wcmEventsV2 1.3.6.1.4.1.43.35.1.7.1.3.0