SONOMASYSTEMS-SONOMA-ATM-DS3-MIB: View SNMP OID List / Download MIB

VENDOR: SONOMA SYSTEMS


 Home MIB: SONOMASYSTEMS-SONOMA-ATM-DS3-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SONOMASYSTEMS-SONOMA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sonomaDS3ATMAdapterGroup 1.3.6.1.4.1.2926.25.7.2
     atmDs3ConfGroup 1.3.6.1.4.1.2926.25.7.2.1
         atmDs3ConfPhyTable 1.3.6.1.4.1.2926.25.7.2.1.1 no-access
A table of physical layer configuration for the DS3 interface
             atmDs3ConfPhyEntry 1.3.6.1.4.1.2926.25.7.2.1.1.1 no-access
A entry in the table, containing information about the physical layer of a DS3 interface
                 atmDs3ConfPhysIndex 1.3.6.1.4.1.2926.25.7.2.1.1.1.1 integer read-only
The physical interface index.
                 atmDs3ConfFraming 1.3.6.1.4.1.2926.25.7.2.1.1.1.2 integer read-only
DS3 or E3 framing selection. Enumeration: 'framingE3': 2, 'framingDS3': 1.
                 atmDs3ConfInsGFCBits 1.3.6.1.4.1.2926.25.7.2.1.1.1.3 integer read-write
Enable/disable the insertion of GFC bits. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmDs3ConfSerBipolarIO 1.3.6.1.4.1.2926.25.7.2.1.1.1.4 integer read-write
Enable/disable bipolar serial I/O. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmDs3ConfScramblePld 1.3.6.1.4.1.2926.25.7.2.1.1.1.5 integer read-write
Enable/disable payload scrambling. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmDs3ConfOverheadPLCP 1.3.6.1.4.1.2926.25.7.2.1.1.1.6 integer read-write
Enable/disable PLCP processing. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmDs3ConfGenerateFEBE 1.3.6.1.4.1.2926.25.7.2.1.1.1.7 integer read-write
Enable/disable FEBE generation when F, M, or CP bit errors received. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmDs3ConfGenerateFEAC 1.3.6.1.4.1.2926.25.7.2.1.1.1.8 integer read-write
Enable/disable FEAC generation and detection. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmDs3ConfLoopback 1.3.6.1.4.1.2926.25.7.2.1.1.1.9 integer read-write
Enable/disable internal loopback. Enumeration: 'disabled': 1, 'internal': 2, 'external': 3.
                 atmDs3ConfCableLength 1.3.6.1.4.1.2926.25.7.2.1.1.1.10 integer read-write
Configure for the length of the cable. Enumeration: 'greaterThan225Feet': 2, 'notGreaterThan225Feet': 1.
                 atmDs3ConfInternalEqualizer 1.3.6.1.4.1.2926.25.7.2.1.1.1.11 integer read-write
Configure to use or bypass the internal equalizer. Enumeration: 'use': 1, 'bypass': 2.
                 atmDs3ConfFillerCells 1.3.6.1.4.1.2926.25.7.2.1.1.1.12 integer read-write
This parameter indicates the type of filler cells to send when there are no data cells. Enumeration: 'idle': 2, 'unassigned': 1.
                 atmDs3ConfGenerateClock 1.3.6.1.4.1.2926.25.7.2.1.1.1.13 integer read-write
Enable/disable clock generation. Enumeration: 'disabled': 2, 'enabled': 1.
     atmDs3StatsGroup 1.3.6.1.4.1.2926.25.7.2.2
         atmDs3PhyStatsTable 1.3.6.1.4.1.2926.25.7.2.2.1 no-access
A table of physical layer statistics information for the DS3 interface
             atmDs3PhyStatsEntry 1.3.6.1.4.1.2926.25.7.2.2.1.1 no-access
A entry in the table, containing information about the physical layer of a DS3 interface
                 atmDs3PhyStatsPhysIndex 1.3.6.1.4.1.2926.25.7.2.2.1.1.1 integer read-only
The physical interface index.
                 atmDs3StatsAlarms 1.3.6.1.4.1.2926.25.7.2.2.1.1.2 counter read-only
Test the PLCP alarm counter
                 atmDs3StatsNoSignals 1.3.6.1.4.1.2926.25.7.2.2.1.1.3 counter read-only
No signal error counter.
                 atmDs3StatsNoDs3Frames 1.3.6.1.4.1.2926.25.7.2.2.1.1.4 counter read-only
No DS-3 frame error counter.
                 atmDs3StatsAisDetects 1.3.6.1.4.1.2926.25.7.2.2.1.1.5 counter read-only
AIS detect counter.
                 atmDs3StatsFrameErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.6 counter read-only
Frame error counter.
                 atmDs3StatsParityErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.7 counter read-only
Parity error counter.
                 atmDs3StatsCpErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.8 counter read-only
CP error counter.
                 atmDs3StatsFeBlockErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.9 counter read-only
Far End Block error counter.
                 atmDs3StatsBpvErrs 1.3.6.1.4.1.2926.25.7.2.2.1.1.10 counter read-only
Bipolar Violation error counter.
                 atmDs3StatsRemoteAlarms 1.3.6.1.4.1.2926.25.7.2.2.1.1.11 counter read-only
Bipolar Violation error counter.
                 atmDs3StatsSignalLoss 1.3.6.1.4.1.2926.25.7.2.2.1.1.12 integer read-only
Signal loss indication. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsOutOfCell 1.3.6.1.4.1.2926.25.7.2.2.1.1.13 integer read-only
ATM out-of-cell delineation. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsFifoOverflow 1.3.6.1.4.1.2926.25.7.2.2.1.1.14 integer read-only
ATM FIFO overflow. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsRemoteAlarmInd 1.3.6.1.4.1.2926.25.7.2.2.1.1.15 integer read-only
Remote alarm indication. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsFrameLoss 1.3.6.1.4.1.2926.25.7.2.2.1.1.16 integer read-only
Frame loss indication. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsSyncLoss 1.3.6.1.4.1.2926.25.7.2.2.1.1.17 integer read-only
Synchronization loss counter. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsPlcpAlarmState 1.3.6.1.4.1.2926.25.7.2.2.1.1.18 integer read-only
Test the PLCP alarm state. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsAisState 1.3.6.1.4.1.2926.25.7.2.2.1.1.19 integer read-only
AIS detect LED state. Enumeration: 'false': 2, 'true': 1.
                 atmDs3StatsClearCounters 1.3.6.1.4.1.2926.25.7.2.2.1.1.20 integer read-write
Clear all counters in this group ONLY. Enumeration: 'false': 2, 'true': 1.