SNMP-HMSA-MIB: View SNMP OID List / Download MIB
VENDOR: TANDEM COMPUTERS
Home | MIB: SNMP-HMSA-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
tandem | 1.3.6.1.4.1.169 | |||
nonstopsystems | 1.3.6.1.4.1.169.3 | |||
zhrm | 1.3.6.1.4.1.169.3.180 | |||
zhrmTableInfo | 1.3.6.1.4.1.169.3.180.1 | |||
zhrmInfStorTable | 1.3.6.1.4.1.169.3.180.1.1 | |||
zhrmInfStorEntries | 1.3.6.1.4.1.169.3.180.1.1.1 | gauge | read-only |
The current number of entries in the hrStorageTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfStorFirstIndex | 1.3.6.1.4.1.169.3.180.1.1.2 | integer | read-only |
The lowest value of hrStorageIndex. VALUE: Integer without leading 0s. DERIVATION: hrStorageTable. |
zhrmInfStorLastIndex | 1.3.6.1.4.1.169.3.180.1.1.3 | integer | read-only |
The highest value of hrStorageIndex. VALUE: Integer without leading 0s. DERIVATION: hrStorageTable. |
zhrmInfStorLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.1.4 | displaystring | read-only |
The system time at which hrStorageTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfStorLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.1.5 | displaystring | read-only |
The system time at which hrStorageTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfStorGetCounter | 1.3.6.1.4.1.169.3.180.1.1.6 | counter | read-only |
The number of Get operations performed on hrStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfStorGetNextCounter | 1.3.6.1.4.1.169.3.180.1.1.7 | counter | read-only |
The number of GetNext operations performed on hrStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfStorSetCounter | 1.3.6.1.4.1.169.3.180.1.1.8 | counter | read-only |
The number of Set operations performed on hrStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDevTable | 1.3.6.1.4.1.169.3.180.1.2 | |||
zhrmInfDevEntries | 1.3.6.1.4.1.169.3.180.1.2.1 | gauge | read-only |
The current number of entries in the hrDeviceTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDevFirstIndex | 1.3.6.1.4.1.169.3.180.1.2.2 | integer | read-only |
The lowest value of hrDeviceIndex. VALUE: Integer without leading 0s. DERIVATION: hrDeviceTable. |
zhrmInfDevLastIndex | 1.3.6.1.4.1.169.3.180.1.2.3 | integer | read-only |
The highest value of hrDeviceIndex. VALUE: Integer without leading 0s. DERIVATION: hrDeviceTable. |
zhrmInfDevLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.2.4 | displaystring | read-only |
The system time at which hrDeviceTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfDevLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.2.5 | displaystring | read-only |
The system time at which hrDeviceTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfDevGetCounter | 1.3.6.1.4.1.169.3.180.1.2.6 | counter | read-only |
The number of Get operations performed on hrDeviceTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDevGetNextCounter | 1.3.6.1.4.1.169.3.180.1.2.7 | counter | read-only |
The number of GetNext operations performed on hrDeviceTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDevSetCounter | 1.3.6.1.4.1.169.3.180.1.2.8 | counter | read-only |
The number of Set operations performed on hrDeviceTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfCpuTable | 1.3.6.1.4.1.169.3.180.1.3 | |||
zhrmInfCpuEntries | 1.3.6.1.4.1.169.3.180.1.3.1 | gauge | read-only |
The current number of entries in the hrProcessorTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfCpuFirstIndex | 1.3.6.1.4.1.169.3.180.1.3.2 | integer | read-only |
The lowest value of hrDeviceIndex for hrProcessorTable entries. VALUE: Integer without leading 0s. DERIVATION: hrProcessorTable. |
zhrmInfCpuLastIndex | 1.3.6.1.4.1.169.3.180.1.3.3 | integer | read-only |
The highest value of hrDeviceIndex for hrProcessorTable entries. VALUE: Integer without leading 0s. DERIVATION: hrProcessorTable. |
zhrmInfCpuLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.3.4 | displaystring | read-only |
The system time at which hrProcessorTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfCpuLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.3.5 | displaystring | read-only |
The system time at which hrProcessorTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfCpuGetCounter | 1.3.6.1.4.1.169.3.180.1.3.6 | counter | read-only |
The number of Get operations performed on hrProcessorTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfCpuGetNextCounter | 1.3.6.1.4.1.169.3.180.1.3.7 | counter | read-only |
The number of GetNext operations performed on hrProcessorTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfCpuSetCounter | 1.3.6.1.4.1.169.3.180.1.3.8 | counter | read-only |
The number of Set operations performed on hrProcessorTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfNetTable | 1.3.6.1.4.1.169.3.180.1.4 | |||
zhrmInfNetEntries | 1.3.6.1.4.1.169.3.180.1.4.1 | gauge | read-only |
The current number of entries in the hrNetworkTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfNetFirstIndex | 1.3.6.1.4.1.169.3.180.1.4.2 | integer | read-only |
The lowest value of hrDeviceIndex for hrNetworkTable entries. VALUE: Integer without leading 0s. DERIVATION: hrNetworkTable. |
zhrmInfNetLastIndex | 1.3.6.1.4.1.169.3.180.1.4.3 | integer | read-only |
The highest value of hrDeviceIndex for hrNetworkTable entries. VALUE: Integer without leading 0s. DERIVATION: hrNetworkTable. |
zhrmInfNetLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.4.4 | displaystring | read-only |
The system time at which hrNetworkTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfNetLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.4.5 | displaystring | read-only |
The system time at which hrNetworkTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfNetGetCounter | 1.3.6.1.4.1.169.3.180.1.4.6 | counter | read-only |
The number of Get operations performed on hrNetworkTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfNetGetNextCounter | 1.3.6.1.4.1.169.3.180.1.4.7 | counter | read-only |
The number of GetNext operations performed on hrNetworkTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfNetSetCounter | 1.3.6.1.4.1.169.3.180.1.4.8 | counter | read-only |
The number of Set operations performed on hrNetworkTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPrnTable | 1.3.6.1.4.1.169.3.180.1.5 | |||
zhrmInfPrnEntries | 1.3.6.1.4.1.169.3.180.1.5.1 | gauge | read-only |
The current number of entries in the hrPrinterTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPrnFirstIndex | 1.3.6.1.4.1.169.3.180.1.5.2 | integer | read-only |
The lowest value of hrDeviceIndex for hrPrinterTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPrinterTable. |
zhrmInfPrnLastIndex | 1.3.6.1.4.1.169.3.180.1.5.3 | integer | read-only |
The highest value of hrDeviceIndex for hrPrinterTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPrinterTable. |
zhrmInfPrnLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.5.4 | displaystring | read-only |
The system time at which hrPrinterTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfPrnLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.5.5 | displaystring | read-only |
The system time at which hrPrinterTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfPrnGetCounter | 1.3.6.1.4.1.169.3.180.1.5.6 | counter | read-only |
The number of Get operations performed on hrPrinterTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPrnGetNextCounter | 1.3.6.1.4.1.169.3.180.1.5.7 | counter | read-only |
The number of GetNext operations performed on hrPrinterTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPrnSetCounter | 1.3.6.1.4.1.169.3.180.1.5.8 | counter | read-only |
The number of Set operations performed on hrPrinterTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDiskTable | 1.3.6.1.4.1.169.3.180.1.6 | |||
zhrmInfDiskEntries | 1.3.6.1.4.1.169.3.180.1.6.1 | gauge | read-only |
The current number of entries in the hrDiskStorageTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDiskFirstIndex | 1.3.6.1.4.1.169.3.180.1.6.2 | integer | read-only |
The lowest value of hrDeviceIndex for hrDiskStorageTable entries. VALUE: Integer without leading 0s. DERIVATION: hrDiskStorageTable. |
zhrmInfDiskLastIndex | 1.3.6.1.4.1.169.3.180.1.6.3 | integer | read-only |
The highest value of hrDeviceIndex for hrDiskStorageTable entries. VALUE: Integer without leading 0s. DERIVATION: hrDiskStorageTable. |
zhrmInfDiskLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.6.4 | displaystring | read-only |
The system time at which hrDiskStorageTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfDiskLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.6.5 | displaystring | read-only |
The system time at which hrDiskStorageTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfDiskGetCounter | 1.3.6.1.4.1.169.3.180.1.6.6 | counter | read-only |
The number of Get operations performed on hrDiskStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDiskGetNextCounter | 1.3.6.1.4.1.169.3.180.1.6.7 | counter | read-only |
The number of GetNext operations performed on hrDiskStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfDiskSetCounter | 1.3.6.1.4.1.169.3.180.1.6.8 | counter | read-only |
The number of Set operations performed on hrDiskStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPartTable | 1.3.6.1.4.1.169.3.180.1.7 | |||
zhrmInfPartEntries | 1.3.6.1.4.1.169.3.180.1.7.1 | gauge | read-only |
The current number of entries in the hrPartitionTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPartFirstIndex | 1.3.6.1.4.1.169.3.180.1.7.2 | integer | read-only |
The lowest value of hrDeviceIndex for hrPartitionTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPartitionTable. |
zhrmInfPartLastIndex | 1.3.6.1.4.1.169.3.180.1.7.3 | integer | read-only |
The highest value of hrDeviceIndex for hrPartitionTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPartitionTable. |
zhrmInfPartLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.7.4 | displaystring | read-only |
The system time at which hrPartitionTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfPartLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.7.5 | displaystring | read-only |
The system time at which hrPartitionTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfPartGetCounter | 1.3.6.1.4.1.169.3.180.1.7.6 | counter | read-only |
The number of Get operations performed on hrPartitionTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPartGetNextCounter | 1.3.6.1.4.1.169.3.180.1.7.7 | counter | read-only |
The number of GetNext operations performed on hrPartitionTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfPartSetCounter | 1.3.6.1.4.1.169.3.180.1.7.8 | counter | read-only |
The number of Set operations performed on hrPartitionTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfFSTable | 1.3.6.1.4.1.169.3.180.1.8 | |||
zhrmInfFSEntries | 1.3.6.1.4.1.169.3.180.1.8.1 | gauge | read-only |
The current number of entries in the hrFSTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfFSFirstIndex | 1.3.6.1.4.1.169.3.180.1.8.2 | integer | read-only |
The lowest value of hrFSIndex. VALUE: Integer without leading 0s. DERIVATION: hrFSTable. |
zhrmInfFSLastIndex | 1.3.6.1.4.1.169.3.180.1.8.3 | integer | read-only |
The highest value of hrFSIndex. VALUE: Integer without leading 0s. DERIVATION: hrFSTable. |
zhrmInfFSLastDynamRefresh | 1.3.6.1.4.1.169.3.180.1.8.4 | displaystring | read-only |
The system time at which hrFSTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfFSLastStableRefresh | 1.3.6.1.4.1.169.3.180.1.8.5 | displaystring | read-only |
The system time at which hrFSTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmInfFSGetCounter | 1.3.6.1.4.1.169.3.180.1.8.6 | counter | read-only |
The number of subagent accesses of hrFSTable objects to handle Get requests since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfFSGetNextCounter | 1.3.6.1.4.1.169.3.180.1.8.7 | counter | read-only |
The number of subagent accesses of hrFSTable objects to handle GetNext requests since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmInfFSSetCounter | 1.3.6.1.4.1.169.3.180.1.8.8 | counter | read-only |
The number of subagent accesses of hrFSTable objects to handle Set requests since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmThreshold | 1.3.6.1.4.1.169.3.180.2 | |||
zhrmThrRAM | 1.3.6.1.4.1.169.3.180.2.1 | |||
zhrmThrRAMTotal | 1.3.6.1.4.1.169.3.180.2.1.1 | gauge | read-only |
The total number of megabytes of RAM in the system. VALUE: Integer without leading 0s. DERIVATION: The value of hrMemorySize, expressed as megabytes instead of kilobytes. |
zhrmThrRAMUse | 1.3.6.1.4.1.169.3.180.2.1.2 | gauge | read-only |
The total number of megabytes of RAM currently being used. VALUE: Integer without leading 0s. DERIVATION: Sum of hrStorageUsed values for all RAM entries in the hrStorageTable. |
zhrmThrRAMPercentUse | 1.3.6.1.4.1.169.3.180.2.1.3 | gauge | read-only |
The percent of zhrmThrRAMTotal that is currently being used. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmThrRAMTrapEnable | 1.3.6.1.4.1.169.3.180.2.1.4 | integer | read-write |
When set to 1 (ramTrapsEnabled), a trap (zhrmRAMThreshold) is sent whenever utilization of a RAM storage area reaches or exceeds zhrmThrRAMHighValue or reaches or falls below zhrmThrRAMLowValue. VALUE: One of these values is displayed: ramTrapsDisabled or ramTrapsEnabled. When setting these values, use 0 or 1. DERIVATION: Initialized to 1 (ramTrapsEnabled) at startup, but can be changed from a manager station. Enumeration: 'ramTrapsDisabled': 0, 'ramTrapsEnabled': 1. |
zhrmThrRAMHighValue | 1.3.6.1.4.1.169.3.180.2.1.5 | integer | read-write |
The percent utilization of a RAM storage area at or above which zhrmThrRAMTable entries are created and a trap generated if zhrmThrRAMTrapEnable is set to 1. VALUE: A value of 1 through 100, 90 by default. A value of 100 suppresses trap generation (regardless of the value of zhrmThrRAMTrapEnable) and zhrmThrRAMTable entry creation. DERIVATION: Set at startup by using the -h startup parameter. Can be changed by setting the value of this MIB object. |
zhrmThrRAMLowValue | 1.3.6.1.4.1.169.3.180.2.1.6 | integer | read-write |
The percent utilization of a RAM storage area at or below which a trap is generated if zhrmThrRAMTrapEnable is set to 1. VALUE: A value of 1 through 100, 45 by default. A value of 0 suppresses trap generation, regardless of the value of zhrmThrRAMTrapEnable. DERIVATION: Set at startup by using the -i startup parameter. Can be changed by setting the value of this MIB object. |
zhrmThrRAMTable | 1.3.6.1.4.1.169.3.180.2.1.7 | no-access |
Entries describing RAM in the hrStorageTable whose usage has reached or exceeded the value of zhrmThrRAMHighValue. |
|
1.3.6.1.4.1.169.3.180.2.1.7.1 | no-access |
Information about RAM in the hrStorageTable whose usage has reached or exceeded the value of zhrmThrRAMHighValue. |
||
zhrmThrRAMIndex | 1.3.6.1.4.1.169.3.180.2.1.7.1.1 | integer | read-only |
An index value having a corresponding value (hrFSStorageIndex) in the hrFSTable. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: The value of hrStorageIndex for the device. |
zhrmThrRAMDescr | 1.3.6.1.4.1.169.3.180.2.1.7.1.2 | displaystring | read-only |
Description of the type of storage represented by the entry. VALUE: The number and type of a processor: CPUnn (processor-type) running Dnn.nn. DERIVATION: The value of hrStorageDescr for the device. |
zhrmThrRAMAllocationUnits | 1.3.6.1.4.1.169.3.180.2.1.7.1.3 | integer | read-only |
The number of bytes allocated by the entry when storage is requested. VALUE: Integer without leading 0s, indicating the page size. DERIVATION: The value of hrStorageAllocationUnits for the device. |
zhrmThrRAMSize | 1.3.6.1.4.1.169.3.180.2.1.7.1.4 | integer | read-only |
The capacity of the entry, in number of allocation units. VALUE: Integer without leading 0s. If the number exceeds 2, 147, 483, 647, the value returned is -1D. DERIVATION: The value of hrStorageSize for the device. |
zhrmThrRAMUsed | 1.3.6.1.4.1.169.3.180.2.1.7.1.5 | integer | read-only |
The capacity of the entry, in number of allocation units. VALUE: Integer without leading 0s. DERIVATION: The value of hrStorageUsed for the device. |
zhrmThrRAMAllocationFailures | 1.3.6.1.4.1.169.3.180.2.1.7.1.6 | counter | read-only |
The number of requests for storage by the entry that could not be honored because of insufficient space. VALUE: Integer without leading 0s, indicating the number of page-fault interrupts since the processor was loaded. DERIVATION: The value of hrStorageAllocationFailures for the device. |
zhrmThrDisk | 1.3.6.1.4.1.169.3.180.2.2 | |||
zhrmThrDiskTotal | 1.3.6.1.4.1.169.3.180.2.2.1 | gauge | read-only |
The total number of megabytes of writeable disk in the system. VALUE: Integer without leading 0s. DERIVATION: Sum of hrStorageSize values for all disk entries in the hrStorageTable, expressed as megabytes. |
zhrmThrDiskUse | 1.3.6.1.4.1.169.3.180.2.2.2 | gauge | read-only |
The total number of megabytes of writeable disk currently being used. VALUE: Integer without leading 0s. DERIVATION: Sum of hrStorageUsed values for all disk entries in the hrStorageTable. |
zhrmThrDiskPercentUse | 1.3.6.1.4.1.169.3.180.2.2.3 | gauge | read-only |
The percent of zhrmThrDiskTotal that is currently being used. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmThrDiskTrapEnable | 1.3.6.1.4.1.169.3.180.2.2.4 | integer | read-write |
When set to 1 (diskTrapsEnabled), a trap (zhrmDiskThreshold) is sent whenever utilization of a writeable disk reaches or exceeds zhrmThrDiskHighValue or reaches or falls below zhrmThrDiskLowValue. VALUE: One of these values is displayed: diskTrapsDisabled or diskTrapsEnabled. When setting these values, use 0 or 1. DERIVATION: Initialized to 1 (diskTrapsEnabled) at startup, but can be changed from a manager station. Enumeration: 'diskTrapsDisabled': 0, 'diskTrapsEnabled': 1. |
zhrmThrDiskHighValue | 1.3.6.1.4.1.169.3.180.2.2.5 | integer | read-write |
The percent utilization of a writeable disk at or above which zhrmThrDiskTable entries are created and a trap generated if zhrmThrDiskTrapEnable is set to 1. VALUE: A value of 1 through 100, 90 by default. A value of 100 suppresses trap generation (regardless of the value of zhrmThrDiskTrapEnable) and zhrmThrDiskTable entry creation. DERIVATION: Set at startup by using the -h startup parameter. Can be changed by setting the value of this MIB object. |
zhrmThrDiskLowValue | 1.3.6.1.4.1.169.3.180.2.2.6 | integer | read-write |
The percent utilization of a writeable disk at or below which a trap is generated if zhrmThrDiskTrapEnable is set to 1. VALUE: A value of 1 through 100, 45 by default. A value of 0 suppresses trap generation, regardless of the value of zhrmThrDiskTrapEnable. DERIVATION: Set at startup by using the -i startup parameter. Can be changed by setting the value of this MIB object. |
zhrmThrDiskTable | 1.3.6.1.4.1.169.3.180.2.2.7 | no-access |
Entries describing writeable disks in the hrStorageTable whose usage has reached or exceeded the value of zhrmThrDiskHighValue. |
|
1.3.6.1.4.1.169.3.180.2.2.7.1 | no-access |
Information about writeable disks in the hrStorageTable whose usage has reached or exceeded the value of zhrm ThrDiskHighValue. |
||
zhrmThrDiskIndex | 1.3.6.1.4.1.169.3.180.2.2.7.1.1 | integer | read-only |
An index value having a corresponding value (hrFSStorageIndex) in the hrFSTable. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: The value of hrStorageIndex for the device. |
zhrmThrDiskDescr | 1.3.6.1.4.1.169.3.180.2.2.7.1.2 | displaystring | read-only |
Description of the type of storage represented by the entry. VALUE: The name and type of the disk: $volume(disk- type). DERIVATION: The value of hrStorageDescr for the device. |
zhrmThrDiskAllocationUnits | 1.3.6.1.4.1.169.3.180.2.2.7.1.3 | integer | read-only |
The number of bytes allocated by the entry when storage is requested. VALUE: 2048, indicating one page. DERIVATION: The value of hrStorageAllocationUnits for the device. |
zhrmThrDiskSize | 1.3.6.1.4.1.169.3.180.2.2.7.1.4 | integer | read-only |
The capacity of the entry, in number of allocation units. VALUE: Integer without leading 0s. The number describes the pages formatted. DERIVATION: The value of hrStorageSize for the device. |
zhrmThrDiskUsed | 1.3.6.1.4.1.169.3.180.2.2.7.1.5 | integer | read-only |
The amount of allocated storage associated with the entry, in allocation units. VALUE: Integer without leading 0s. DERIVATION: The value of hrStorageUsed for the device. |
zhrmThrDiskAllocationFailures | 1.3.6.1.4.1.169.3.180.2.2.7.1.6 | counter | read-only |
The number of requests for storage by the entry that could not be honored because of insufficient space. VALUE: This value is not available, and 0 is returned. DERIVATION: The value of hrStorageAllocationFailures for the device. |
zhrmDevUnavail | 1.3.6.1.4.1.169.3.180.3 | |||
zhrmDevUnCurrTime | 1.3.6.1.4.1.169.3.180.3.1 | displaystring | read-only |
The current system time. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmDevUnUp | 1.3.6.1.4.1.169.3.180.3.2 | gauge | read-only |
The total number of devices for which the value of hrDeviceStatus is 2 (running). VALUE: Integer without leading 0s. DERIVATION: Sum of entries in hrDeviceTable having specified status. |
zhrmDevUnDown | 1.3.6.1.4.1.169.3.180.3.3 | gauge | read-only |
The total number of devices for which the value of hrDeviceStatus is 5 (down). VALUE: Integer without leading 0s. DERIVATION: Sum of entries in hrDeviceTable having specified status. |
zhrmDevUnOther | 1.3.6.1.4.1.169.3.180.3.4 | gauge | read-only |
The total number of devices for which the value of hrDeviceStatus is 1 (unknown), 3 (warning), or 4 (testing). VALUE: Integer without leading 0s. DERIVATION: Sum of entries in hrDeviceTable having specified status. |
zhrmDevUnTrapEnable | 1.3.6.1.4.1.169.3.180.3.5 | integer | read-write |
When set to 1 (devUnTrapsEnabled), a trap (zhrmTrapDeviceStateChange) is sent whenever the value of hrDeviceStatus changes. VALUE: One of these values is displayed: devUnTrapsDisabled or devUnTrapsEnabled. When setting these values, use 0 or 1. DERIVATION: Initialized to 1 (devUnTrapsEnabled) at startup, but can be changed from a manager station. Enumeration: 'devUnTrapsDisabled': 0, 'devUnTrapsEnabled': 1. |
zhrmDevUnTable | 1.3.6.1.4.1.169.3.180.3.6 | no-access |
Entries duplicating entries in the hrDeviceTable for devices that have an hrDeviceStatus value other than 2 (running). |
|
1.3.6.1.4.1.169.3.180.3.6.1 | no-access |
Information duplicating that in the hrDeviceTable for devices that have an hrDeviceStatus value other than 2 (running). |
||
zhrmDevUnIndex | 1.3.6.1.4.1.169.3.180.3.6.1.1 | integer | read-only |
Index values that point to entries in the hrProcessorTable, the hrPrinterTable, the hrDiskStorageTable, the hrNetworkTable, and the hrPartitionTable. VALUE: Integers running sequentially from 1. DERIVATION: The value of hrDeviceIndex for qualifying devices. |
zhrmDevUnType | 1.3.6.1.4.1.169.3.180.3.6.1.2 | object identifier | read-only |
One of the following device types defined by RFC 1514 that characterizes the entry: hrDeviceProcessor, hrDeviceNetwork, hrDevicePrinter, hrDeviceDiskStorage, hrDeviceTape. VALUE: For CPUs: 1.3.6.1.2.1.25.3.1.3. For printers: 1.3.6.1.2.1.25.3.1.5. For disks: 1.3.6.1.2.1.25.3.1.6. For tape drives: 1.3.6.1.2.1.25.3.1.18. For network devices: 1.3.6.1.2.1.25.3.1.4. DERIVATION: The value of hrDeviceType for qualifying devices. |
zhrmDevUnDescr | 1.3.6.1.4.1.169.3.180.3.6.1.3 | displaystring | read-only |
Description of the type of device represented by the entry. VALUE: For CPUs: the number and type of a processor: CPUnn (processor-type). For printers: the name of a printer or Spooler collector. Printers have names of the form $printer-id. Spooler collectors, used as pseudo printers, have names of the form [\node-name]$collector-process-name[.#group- name]. For disks: the name and type of the disk: $volume(disk-type). For tapes: $tape-drive-name. For network devices: $network-device. For a loop back device: $NOIOP. DERIVATION: The value of hrDeviceDescr for qualifying devices. |
zhrmDevUnID | 1.3.6.1.4.1.169.3.180.3.6.1.4 | object identifier | read-only |
An identifier characterizing the entry as a particular device type and subtype. VALUE: The root of the identifier is the same for all entries: 1.3.6.1.4.1.169.3.180. Appended to this value are the type and subtype values. For example, the hrDeviceID for a 4500 (1038-MB formatted capacity per spindle) disk would look like this:1.3.6.1.4.1.169.3.180.3.22. Refer to the 'Guardian Procedure Calls Reference Manual' for a complete list of all device types and subtypes. DERIVATION: The value of hrDeviceID for qualifying devices. |
zhrmDevUnStatus | 1.3.6.1.4.1.169.3.180.3.6.1.5 | integer | read-only |
The current state the device represented by the entry is in. VALUE: One of these values: unknown, warning, testing down. DERIVATION: The value of hrDeviceStatus for qualifying devices. Enumeration: 'down': 5, 'unknown': 1, 'running': 2, 'warning': 3, 'testing': 4. |
zhrmDevUnErrors | 1.3.6.1.4.1.169.3.180.3.6.1.6 | counter | read-only |
The number of errors detected on the device described by the entry. VALUE: Integer without leading 0s. DERIVATION: The value of hrDeviceErrors for qualifying devices. |
zhrmSaProcess | 1.3.6.1.4.1.169.3.180.4 | |||
zhrmSaProcCurrTime | 1.3.6.1.4.1.169.3.180.4.1 | displaystring | read-only |
The current system time. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmSaProcVersion | 1.3.6.1.4.1.169.3.180.4.2 | displaystring | read-only |
The version of the Host Resources Subagent. VALUE: T8496Dnn_date -- Tandem Host Resources Subagent. Where Dnn is the product version of the Host Resources Subagent, for example, D21. DERIVATION: Host Resources Subagent. |
zhrmSaProcName | 1.3.6.1.4.1.169.3.180.4.3 | displaystring | read-only |
The name of the subagent process. VALUE: $process-name, where process-name is from 1 through 5 alphanumeric characters. DERIVATION: The name specified in the TACL NAME option when the subagent was started. |
zhrmSaPaid | 1.3.6.1.4.1.169.3.180.4.4 | displaystring | read-only |
The process access ID (PAID) of the subagent process. VALUE: group-number, user-number. DERIVATION: The group and user numbers associated with the user who started the subagent. |
zhrmSaPID | 1.3.6.1.4.1.169.3.180.4.5 | displaystring | read-only |
The process ID (PID) of the subagent process. VALUE: (CPU-number, PIN-number). DERIVATION: Host Resources Subagent. |
zhrmSaCreatTime | 1.3.6.1.4.1.169.3.180.4.6 | displaystring | read-only |
The system time at which the subagent process started. VALUE: started month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmSaCpuTime | 1.3.6.1.4.1.169.3.180.4.7 | displaystring | read-only |
The amount of CPU time used by the subagent since starting. VALUE: HH:MM:SS. DERIVATION: Computed by Host Resources Subagent. |
zhrmSaPri | 1.3.6.1.4.1.169.3.180.4.8 | integer | read-write |
The priority of the subagent primary and backup processes. VALUE: Integer without leading 0s. DERIVATION: Initially, the value of the -n startup parameter (145 or a user-specified value). After startup, the value can be set from a manager station. |
zhrmSaHomeTerm | 1.3.6.1.4.1.169.3.180.4.9 | displaystring | read-only |
The name of the terminal from which the subagent was started. VALUE: \node.$device-name.#subdevice-name. DERIVATION: Guardian procedure PROCESS_GETINFO_. |
zhrmSaIniFile | 1.3.6.1.4.1.169.3.180.4.10 | displaystring | read-only |
The name of the subagent initialization file. VALUE: \node.$volume.subvolume.file. DERIVATION: The name specified in the -e startup parameter. If not specified, the name HMSAINI. |
zhrmSaHeapInitial | 1.3.6.1.4.1.169.3.180.4.11 | gauge | read-only |
The number of bytes of memory buffer space allocated at subagent startup. VALUE: Integer without leading 0s. DERIVATION: Internal library routine. |
zhrmSaHeapCurrent | 1.3.6.1.4.1.169.3.180.4.12 | gauge | read-only |
The number of bytes of memory buffer space currently in use by the subagent. VALUE: Integer without leading 0s. DERIVATION: Internal library routine. |
zhrmGetPDUsCounter | 1.3.6.1.4.1.169.3.180.4.13 | counter | read-only |
The number of Get requests received from the NonStop agent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmGetNextPDUsCounter | 1.3.6.1.4.1.169.3.180.4.14 | counter | read-only |
The number of GetNext requests received from the NonStop agent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmSetPDUsCounter | 1.3.6.1.4.1.169.3.180.4.15 | counter | read-only |
The number of Set requests received from the NonStop agent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmTrapPDUsCounter | 1.3.6.1.4.1.169.3.180.4.16 | counter | read-only |
The number of traps generated by the subagent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmEnableSoftwareGroup | 1.3.6.1.4.1.169.3.180.4.17 | integer | read-write |
A switch that suppresses maintenance of hrSWRun and hrSWRunPerf group objects when set to 0. VALUE: One of these values is displayed: swValuesDisabled or swValuesEnabled. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 1 (swValuesEnabled) unless the -w startup parameter is used. The -w startup parameter sets this value to 0. Enumeration: 'swValuesDisabled': 0, 'swValuesEnabled': 1. |
zhrmSwitchToBackupNow | 1.3.6.1.4.1.169.3.180.4.18 | integer | read-write |
A switch that causes the subagent backup process to take over and a new backup process to be created when set to 1. VALUE: One of these values is displayed: autoProcessPairControl or forceBackupTakeover. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 0 (autoProcessPairControl), but it can be changed from a manager station if the subagent was started using the -b startup parameter. Enumeration: 'autoProcessPairControl': 0, 'forceBackupTakeover': 1. |
zhrmExamineGuardian | 1.3.6.1.4.1.169.3.180.4.19 | integer | read-write |
determines whether the subagent obtains hrPartition, hrFilesystem, hrFileSystemType, hrSoftwareRun, and hrSoftwareRunPerformance table information from Guardian personality. VALUE: One of these values is displayed: disabled or enabled. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 1 (enabled). The value of this variables depends on the -t startup parameter. Enumeration: 'disabled': 0, 'enabled': 1. |
zhrmExamineOSS | 1.3.6.1.4.1.169.3.180.4.20 | integer | read-write |
determines whether the subagent obtains hrPartition, hrFilesystem, hrFileSystemType, hrSoftwareRun, and hrSoftwareRunPerformance table information from Open Systems Services personality. VALUE: One of these values is displayed: disabled or enabled. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 0 (disabled), but it can be changed from a manager station if the subagent was started using the -u startup parameter. Enumeration: 'disabled': 0, 'enabled': 1. |
zhrmRefresh | 1.3.6.1.4.1.169.3.180.5 | |||
zhrmRefreshCurrTime | 1.3.6.1.4.1.169.3.180.5.1 | displaystring | read-only |
The current system time. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmDynamRefreshInterval | 1.3.6.1.4.1.169.3.180.5.2 | integer | read-only |
The number of minutes assigned to the -d startup parameter when the subagent was started. VALUE: Integer without leading 0s. DERIVATION: Subagent -d startup parameter. |
zhrmStableRefreshInterval | 1.3.6.1.4.1.169.3.180.5.3 | integer | read-only |
The number of minutes assigned to the -s startup parameter when the subagent was started. VALUE: Integer without leading 0s. DERIVATION: Subagent -s startup parameter. |
zhrmLastDynamRefreshTime | 1.3.6.1.4.1.169.3.180.5.4 | displaystring | read-only |
The system time at which MIB values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmLastStableRefreshTime | 1.3.6.1.4.1.169.3.180.5.5 | displaystring | read-only |
The system time at which MIB values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS DERIVATION: Guardian procedure JULIANTIMESTAMP. |
zhrmDynamRefreshCnt | 1.3.6.1.4.1.169.3.180.5.6 | counter | read-only |
The number of times since the subagent was started that MIB values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were refreshed. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmStableRefreshCnt | 1.3.6.1.4.1.169.3.180.5.7 | counter | read-only |
The number of times since the subagent was started that MIB values controlled by the -s startup parameter or the zhrmStableRefreshNow object were refreshed. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent. |
zhrmDynamRefreshNow | 1.3.6.1.4.1.169.3.180.5.8 | integer | read-write |
When set to 1 (forceDynamicRefresh)MIB objects whose values are controlled by the -d startup parameter are refreshed. VALUE: One of these values is displayed: autoDynamicRefresh forceDynamicRefresh. When setting these values, use 0 or 1. DERIVATION: Initialized to 0 (autoDynamicRefresh) at startup, but can be changed from a manager station. Enumeration: 'forceDynamicRefresh': 1, 'autoDynamicRefresh': 0. |
zhrmStableRefreshNow | 1.3.6.1.4.1.169.3.180.5.9 | integer | read-write |
When set to 1(forceStableRefresh), MIB objects whose values are controlled by the -s startup parameter are refreshed. VALUE: One of these values is displayed: autoStableRefresh or forceStableRefresh. When setting these values, use 0 or 1. DERIVATION: Initialized to 0 (autoStableRefresh) at startup, but can be changed from a manager station. Enumeration: 'autoStableRefresh': 0, 'forceStableRefresh': 1. |
zhrmTraps | 1.3.6.1.4.1.169.3.180.7 | |||
zhrmTrapDeviceStateIndex | 1.3.6.1.4.1.169.3.180.7.1 | integer | no-access |
Index value that points to the entry (in the hrProcessorTable, the hrPrinterTable, the hrDiskStorageTable, the hrNetworkTable, or the hrPartitionTable) for the device that the trap describes. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: The value of zhrmDevUnIndex for the device. |
zhrmTrapDeviceDescr | 1.3.6.1.4.1.169.3.180.7.2 | displaystring | no-access |
A description of the type of device that the trap describes. VALUE: For CPUs: the number and type of a processor: CPUnn (processor-type). For printers: the name of a printer or Spooler collector. Printers have names of the form $printer-id. Spooler collectors, used as pseudo printers, have names of the form [\node-name]$collector-process-name[.#group- name]. For disks: the name and type of the disk: $volume(disk-type). For tapes: $tape-drive-name. For network devices: $network-device. For a loop back device: $NOIOP. DERIVATION: The value of zhrmDevUnDescr for the device. |
zhrmTrapDeviceStatus | 1.3.6.1.4.1.169.3.180.7.3 | integer | no-access |
The current state the device that the trap describes is in. VALUE: One of the following values: unknown, warning, testing, down. DERIVATION: The value of zhrmDevUnStatus for the device. Enumeration: 'down': 5, 'unknown': 1, 'running': 2, 'warning': 3, 'testing': 4. |
zhrmTrapStorageThrIndex | 1.3.6.1.4.1.169.3.180.7.4 | integer | no-access |
Index value that points to the entry in the hrStorageTable for the device that the trap describes. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: For RAM: the value of zhrmThrRAMIndex for the RAM storage area. For disks: the value of zhrmThrDiskIndex for the device. |
zhrmTrapStorageDescr | 1.3.6.1.4.1.169.3.180.7.5 | displaystring | read-only |
Description of the type of storage represented by the entry. VALUE: For RAM: number and type of a processor: CPUnn(processor-type) running Dnn.nn. For disks: The name and type of the disk: $volume(disk-type). DERIVATION: For RAM: the value of zhrmThrRAMDescr for the RAM storage area. For disks: the value of zhrmThrDiskDescr for the device. |
zhrmTrapDeviceStateChange | 1.3.6.1.4.1.169.3.180.70.1 |
When zhrmDevUnTrapEnable is set to 1, this trap is generated whenever the status of any device represented in the hrDevice group changes. |
||
zhrmRAMThreshold | 1.3.6.1.4.1.169.3.180.70.2 |
When zhrmThrRAMTrapEnable is set to 1, this trap is generated whenever the utilization of any RAM storage area represented in the hrStorage group reaches or exceeds a high threshold (represented by the value of zhrmThrRAMHighValue in the zhrmThreshold group) or reaches or falls below a low threshold (represented by the value of zhrmThrRAMLowValue in the zhrmThreshold group. |
||
zhrmDiskThreshold | 1.3.6.1.4.1.169.3.180.70.3 |
When zhrmThrDiskTrapEnable is set to 1, this trap is generated whenever the utilization of any disk represented in the hrStorage group reaches or exceeds a high threshold (represented by the value of zhrmThrDiskLowValue in the zhrmThreshold group) or reaches or falls below a low threshold (represented by the value of zhrmThrDiskLowValue in the zhrmThreshold group). |