SLEV2-Security-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: SLEV2-Security-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, DASAN-SMI, SLE-TC-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sleV2Security 1.3.6.1.4.1.6296.102.7
slev2 security
     sleV2SecurityBase 1.3.6.1.4.1.6296.102.7.1
     sleVSecurity4 1.3.6.1.4.1.6296.102.7.2
         sleV2SecurityACL 1.3.6.1.4.1.6296.102.7.2.5
             sleV2Security4ACLBase 1.3.6.1.4.1.6296.102.7.2.5.1
             sleV2Security4ACLFlow 1.3.6.1.4.1.6296.102.7.2.5.2
                 sleV2Security4ACLFlowInfo 1.3.6.1.4.1.6296.102.7.2.5.2.1
                     sleV2Security4ACLFlowTable 1.3.6.1.4.1.6296.102.7.2.5.2.1.1 no-access
ACL flow table.
                         sleV2Security4ACLFlowEntry 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1 no-access
key: sleV2Security4ACLFlowIndex
                             sleV2Security4ACLFlowIndex 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1 integer read-only
The index of flow
                             sleV2Security4ACLFlowName 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2 octetname read-only
The name of flow
                             sleV2Security4ACLFlowSrcIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3 ipaddress read-only
The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
                             sleV2Security4ACLFlowSrcIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4 intipaddrmask read-only
The mask of source IP address The value of -1 means any(not set)
                             sleV2Security4ACLFlowDstIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5 ipaddress read-only
The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
                             sleV2Security4ACLFlowDstIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6 intipaddrmask read-only
The mask of destination IP address The value of -1 means any(not set)
                             sleV2Security4ACLFlowProtocolType 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7 intprotocoltype read-only
The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is u(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set)
                             sleV2Security4ACLFlowTcpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8 intl4port read-only
The start source port in range of source port in TCP packet The value of -1 means any(not set)
                             sleV2Security4ACLFlowTcpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9 intl4port read-only
The end source port in range of source port in TCP packet The value of -1 means any(not set)
                             sleV2Security4ACLFlowTcpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10 intl4port read-only
The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
                             sleV2Security4ACLFlowTcpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11 intl4port read-only
The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
                             sleV2Security4ACLFlowTcpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12 bits read-only
The flag in TCP packet Bits: 'psh': 4, 'urg': 2, 'ack': 3, 'reserv0': 0, 'reserv1': 1, 'syn': 6, 'rst': 5, 'fin': 7.
                             sleV2Security4ACLFlowUdpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13 intl4port read-only
The start source port in range of source port in UDP packet The value of -1 means any(not set)
                             sleV2Security4ACLFlowUdpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14 intl4port read-only
The end source port in range of source port in UDP packet The value of -1 means any(not set)
                             sleV2Security4ACLFlowUdpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15 intl4port read-only
The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
                             sleV2Security4ACLFlowUdpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16 intl4port read-only
The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
                             sleV2Security4ACLFlowIcmpType 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17 inticmptype read-only
The type of ICMP message The value of -1 means any(not set)
                             sleV2Security4ACLFlowIcmpCode 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18 inticmpcode read-only
The code of ICMP message The value of -1 means any(not set)
                             sleV2Security4ACLFlowHdrlen 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19 integer read-only
The IP header length. The value of 0 means any(not set)
                             sleV2Security4ACLFlowIpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20 integer read-only
The any flag of IP address. Enumeration: 'none': 0, 'srcDstAny': 3, 'srcAny': 1, 'dstAny': 2.
                             sleV2SecurityACLFlowInetAddrType 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21 inetaddresstype read-only
IP address type
                             sleV2SecurityACLFlowSrcInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22 inetaddress read-only
The IP address to match against the packets source IP address.
                             sleV2SecurityACLFlowDstInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23 inetaddress read-only
The IP address to match against the packets destination IP address.
                             sleV2SecurityACLFlowSrcInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24 inetaddressprefixlength read-only
The prefix length of source IP address
                             sleV2SecurityACLFlowDstInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25 inetaddressprefixlength read-only
The prefix length of destination IP address
                     sleV2Security4ACLFlowControl 1.3.6.1.4.1.6296.102.7.2.5.2.1.2
                         sleV2Security4ACLFlowControlRequest 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1 integer read-write
The request of a user command Enumeration: 'destroyAllFlow': 4, 'setFlowEx': 6, 'destroyFlow': 3, 'createFlow': 1, 'createFlowEx': 5, 'modifyFlow': 2.
                         sleV2Security4ACLFlowControlStatus 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2 slecontrolstatustype read-only
The status of user command
                         sleV2Security4ACLFlowControlTimer 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                         sleV2Security4ACLFlowControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4 timeticks read-only
The time stamp of the last command(end of command)
                         sleV2Security4ACLFlowControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                         sleV2Security4ACLFlowControlIndex 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6 intflowindex read-write
The index of flow
                         sleV2Security4ACLFlowControlName 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7 octetname read-write
The name of flow
                         sleV2Security4ACLFlowControlSrcIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8 ipaddress read-write
The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
                         sleV2Security4ACLFlowControlSrcIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9 intipaddrmask read-write
The mask of source IP address The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlDstIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10 ipaddress read-write
The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
                         sleV2Security4ACLFlowControlDstIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11 intipaddrmask read-write
The mask of destination IP address The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlProtocolType 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12 intprotocoltype read-write
The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is u(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlTcpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13 intl4port read-write
The start source port in range of source port in TCP packet The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlTcpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14 intl4port read-write
The end source port in range of source port in TCP packet The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlTcpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15 intl4port read-write
The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlTcpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16 intl4port read-write
The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlTcpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17 bits read-write
The flag in TCP packet Bits: 'psh': 4, 'urg': 2, 'ack': 3, 'reserv0': 0, 'reserv1': 1, 'syn': 6, 'rst': 5, 'fin': 7.
                         sleV2Security4ACLFlowControlUdpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18 intl4port read-write
The start source port in range of source port in UDP packet The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlUdpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19 intl4port read-write
The end source port in range of source port in UDP packet The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlUdpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20 intl4port read-write
The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlUdpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21 intl4port read-write
The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlIcmpType 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22 inticmptype read-write
The type of ICMP message The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlIcmpCode 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23 inticmpcode read-write
The code of ICMP message The value of -1 means any(not set)
                         sleV2Security4ACLFlowControlHdrlen 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24 integer read-write
The IP header length The value of 0 means any(not set)
                         sleV2Security4ACLFlowControlIpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25 integer read-write
The any flag of IP address. Enumeration: 'none': 0, 'srcDstAny': 3, 'srcAny': 1, 'dstAny': 2.
                         sleV2SecurityACLFlowControlInetAddrType 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26 inetaddresstype read-write
IP address type
                         sleV2SecurityACLFlowControlSrcInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27 inetaddress read-write
The IP address to match against the packets source IP address.
                         sleV2SecurityACLFlowControlDstInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28 inetaddress read-write
The IP address to match against the packets destination IP address.
                         sleV2SecurityACLFlowControlSrcInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29 inetaddressprefixlength read-write
The prefix length of source IP address
                         sleV2SecurityACLFlowControlDstInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30 inetaddressprefixlength read-write
The prefix length of destination IP address
                     sleV2Security4ACLFlowNotification 1.3.6.1.4.1.6296.102.7.2.5.2.1.3
                         sleACLFlowCreated 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1
Description.
                         sleACLFlowChanged 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2
Description.
                         sleACLFlowDestroyed 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3
Description.
                         sleACLFlowAllDestroyed 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4
Description.
                         sleACLFlowExCreated 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5
createACLFlowEx
                         sleACLFlowExChanged 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6
setACLFlowEx
                 sleV2Security4ACLFlowClass 1.3.6.1.4.1.6296.102.7.2.5.2.2
                     sleV2Security4ACLFlowClassTable 1.3.6.1.4.1.6296.102.7.2.5.2.2.1 no-access
ACL flow class table.
                         sleV2Security4ACLFlowClassEntry 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1 no-access
key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex
                             sleV2Security4ACLFlowClassIndex 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1 intclassindex read-only
The index of the class for the flow
                             sleV2Security4ACLFlowClassID 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2 intclassindex read-only
The identifier of the class
                             sleV2Security4ACLFlowClassName 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3 octetname read-only
The name of the class
                 sleV2Security4ACLFlowPolicy 1.3.6.1.4.1.6296.102.7.2.5.2.3
                     sleV2QoS4ACLFlowPolicyTable 1.3.6.1.4.1.6296.102.7.2.5.2.3.1 no-access
ACL flow policy table.
                         sleV2QoS4ACLFlowPolicyEntry 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1 no-access
key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex
                             sleV2Security4ACLFlowPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1 intpolicyindex read-only
The index of the policy for the flow
                             sleV2Security4ACLFlowPolicyID 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2 intpolicyindex read-only
The identifier of the policy
                             sleV2Security4ACLFlowPolicyName 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3 octetname read-only
The name of the policy
             sleV2Security4ACLClass 1.3.6.1.4.1.6296.102.7.2.5.3
                 sleV2Security4ACLClassInfo 1.3.6.1.4.1.6296.102.7.2.5.3.1
                     sleV2Security4ACLClassTable 1.3.6.1.4.1.6296.102.7.2.5.3.1.1 no-access
ACL class table.
                         sleV2Security4ACLClassEntry 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1 no-access
key: sleV2Security4ACLClassIndex
                             sleV2Security4ACLClassIndex 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1 intclassindex read-only
The index of class
                             sleV2Security4ACLClassName 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2 octetname read-only
The name of class
                             sleV2Security4ACLClassFlowCnt 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3 counter32 read-only
The counter of flow in class
                     sleV2Security4ACLClassControl 1.3.6.1.4.1.6296.102.7.2.5.3.1.2
                         sleV2Security4ACLClassControlRequest 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1 integer read-write
The request of a user command Enumeration: 'destroyClass': 2, 'destroyAllClass': 3, 'createClass': 1.
                         sleV2Security4ACLClassControlStatus 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2 slecontrolstatustype read-only
The status of user command
                         sleV2Security4ACLClassControlTimer 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                         sleV2Security4ACLClassControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4 timeticks read-only
The time stamp of the last command(end of command)
                         sleV2Security4ACLClassControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                         sleV2Security4ACLClassControlIndex 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6 intclassindex read-write
The index of class
                         sleV2Security4ACLClassControlName 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7 octetname read-write
The name of class
                     sleV2Security4ACLClassNotification 1.3.6.1.4.1.6296.102.7.2.5.3.1.3
                         sleACLClassCreated 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1
Description.
                         sleACLClassDestroyed 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2
Description.
                         sleACLClassAllDestroyed 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3
Description.
                 sleV2Security4ACLClassFlow 1.3.6.1.4.1.6296.102.7.2.5.3.2
                     sleV2Security4ACLClassFlowTable 1.3.6.1.4.1.6296.102.7.2.5.3.2.1 no-access
Description.
                         sleV2Security4ACLClassFlowEntry 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1 no-access
Description.
                             sleV2Security4ACLClassFlowIndex 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1 intflowindex read-only
The index of flow in class
                             sleV2Security4ACLClassFlowID 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2 intflowindex read-only
The identifier of flow
                             sleV2Security4ACLClassFlowName 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3 octetname read-only
The name of the flow
                             sleV2Security4ACLClassFlowClassName 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4 octetname read-only
The class name of the Classflow
                     sleV2Security4ACLClassFlowControl 1.3.6.1.4.1.6296.102.7.2.5.3.2.2
                         sleV2Security4ACLClassFlowControlRequest 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1 integer read-write
The request of a user command Enumeration: 'addFlow': 1, 'deleteAllFlow': 3, 'deleteFlow': 2.
                         sleV2Security4ACLClassFlowControlStatus 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2 slecontrolstatustype read-only
The status of user command
                         sleV2Security4ACLClassFlowControlTimer 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                         sleV2Security4ACLClassFlowControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4 timeticks read-only
The time stamp of the last command(end of command)
                         sleV2Security4ACLClassFlowControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                         sleV2Security4ACLClassFlowControlClassIndex 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6 intclassindex read-write
The index of class
                         sleV2Security4ACLClassFlowControlFlowIndex 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7 intflowindex read-write
The index of flow in this class
                         sleV2Security4ACLClassFlowControlFlowID 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8 intflowindex read-write
The index of flow Refer to sleV2QoS4FlowIndex
                         sleV2Security4ACLClassFlowControlClassName 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9 octet string read-write
The class name of classFlow
                     sleV2Security4ACLClassFlowNotification 1.3.6.1.4.1.6296.102.7.2.5.3.2.3
                         sleACLClassFlowAdded 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1
Description.
                         sleACLClassFlowDeleted 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2
Description.
                         sleACLClassFlowAllDeleted 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3
Description.
                 sleV2Security4ACLClassPolicy 1.3.6.1.4.1.6296.102.7.2.5.3.3
                     sleV2Security4ACLClassPolicyTable 1.3.6.1.4.1.6296.102.7.2.5.3.3.1 no-access
Description.
                         sleV2Security4ACLClassPolicyEntry 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1 no-access
Description.
                             sleV2Security4ACLClassPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1 intpolicyindex read-only
The index of the policy for the class
                             sleV2Security4ACLClassPolicyID 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2 intpolicyindex read-only
The identifier of the policy
                             sleV2Security4ACLClassPolicyName 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3 octetname read-only
The name of the policy
             sleV2Security4ACLPolicy 1.3.6.1.4.1.6296.102.7.2.5.4
                 sleV2Security4ACLPolicyInfo 1.3.6.1.4.1.6296.102.7.2.5.4.1
                     sleV2Security4ACLPolicyTable 1.3.6.1.4.1.6296.102.7.2.5.4.1.1 no-access
ACL policy table.
                         sleV2Security4ACLPolicyEntry 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1 no-access
key: sleV2Security4ACLPolicyIndex
                             sleV2Security4ACLPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1 intpolicyindex read-only
The index of policy
                             sleV2Security4ACLPolicyName 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2 octetname read-only
The name of policy
                             sleV2Security4ACLPolicyFlowCnt 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3 integer32 read-only
The counter of flow that was included to policy
                             sleV2Security4ACLPolicyClassCnt 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4 integer32 read-only
The counter of class that was included to policy
                             sleV2Security4ACLPolicyPriority 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5 integer read-only
The priority of the policy low : default value Enumeration: 'high': 3, 'highest': 4, 'medium': 2, 'low': 1.
                             sleV2Security4ACLPolicyMatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6 intpermit read-only
The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
                             sleV2Security4ACLPolicyNomatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7 intpermit read-only
The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
                     sleV2Security4ACLPolicyControl 1.3.6.1.4.1.6296.102.7.2.5.4.1.2
                         sleV2Security4ACLPolicyControlRequest 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1 integer read-write
The request of a user command Enumeration: 'destroyPolicy': 5, 'setPolicyInfo': 2, 'setNomatchAction': 4, 'createPolicy': 1, 'setMatchAction': 3.
                         sleV2Security4ACLPolicyControlStatus 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2 slecontrolstatustype read-only
The status of user command
                         sleV2Security4ACLPolicyControlTimer 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                         sleV2Security4ACLPolicyControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4 timeticks read-only
The time stamp of the last command(end of command)
                         sleV2Security4ACLPolicyControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                         sleV2Security4ACLPolicyControlIndex 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6 intpolicyindex read-write
The index of policy
                         sleV2Security4ACLPolicyControlName 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7 octetname read-write
The name of policy
                         sleV2Security4ACLPolicyControlPriority 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8 intrulepriority read-write
The priority of the policy low : default
                         sleV2Security4ACLPolicyControlMatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9 intpermit read-write
The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
                         sleV2Security4ACLPolicyControlNomatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10 intpermit read-write
The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
                         sleV2Security4ACLPolicyControlFlowID 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11 integer32 read-write
The index of flow
                         sleV2Security4ACLPolicyControlClassID 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12 integer32 read-write
The index of class
                     sleV2Security4ACLPolicyNotification 1.3.6.1.4.1.6296.102.7.2.5.4.1.3
                         sleACLPolicyCreated 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1
Description.
                         sleACLPolicyInfoChanged 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2
Description.
                         sleACLPolicyMatchActionChanged 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3
Description.
                         sleACLPolicyNomatchActionChanged 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4
Description.
                         sleACLPolicyDestroyed 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5
Description.
                 sleV2Security4ACLPolicyFlowClass 1.3.6.1.4.1.6296.102.7.2.5.4.2
                     sleV2Security4ACLPolicyFlowClassTable 1.3.6.1.4.1.6296.102.7.2.5.4.2.1 no-access
ACL policy flow class table.
                         sleV2Security4ACLPolicyFlowClassEntry 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1 no-access
key: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex
                             sleV2Security4ACLPolicyFlowClassIndex 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1 intflowindex read-only
The index of flow or class in policy
                             sleV2Security4ACLPolicyFlowClassType 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2 intfloworclass read-only
The flag about flow or class
                             sleV2Security4ACLPolicyFlowClassID 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3 intflowindex read-only
The identifier of class or flow
                             sleV2Security4ACLPolicyFlowClassName 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4 octetname read-only
The name of class or flow
                     sleV2Security4ACLPolicyFlowClassControl 1.3.6.1.4.1.6296.102.7.2.5.4.2.2
                         sleV2Security4ACLPolicyFlowClassControlRequest 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1 integer read-write
The request of a user command Enumeration: 'deleteAllClass': 4, 'deleteAllFlow': 3, 'deleteFlowClass': 2, 'deleteAllFlowClass': 5, 'addFlowClass': 1.
                         sleV2Security4ACLPolicyFlowClassControlStatus 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2 slecontrolstatustype read-write
The status of user command
                         sleV2Security4ACLPolicyFlowClassControlTimer 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                         sleV2Security4ACLPolicyFlowClassControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4 timeticks read-write
The time stamp of the last command(end of command)
                         sleV2Security4ACLPolicyFlowClassControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5 slecontrolrequestresulttype read-write
The result of the last user command
                         sleV2Security4ACLPolicyFlowClassControlPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6 intpolicyindex read-write
The index of Policy
                         sleV2Security4ACLPolicyFlowClassControlIndex 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7 intflowindex read-write
The index of flow or class in this policy
                         sleV2Security4ACLPolicyFlowClassControlType 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8 intfloworclass read-write
The type of flow or class
                         sleV2Security4ACLPolicyFlowClassControlFlowID 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9 intflowindex read-write
The index of flow Available according to sleV2QoS4PolicyFlowClassControlType.
                         sleV2Security4ACLPolicyFlowClassControlClassID 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10 intclassindex read-write
The index of class Available according to sleV2QoS4PolicyFlowClassControlType.
                     sleV2Security4ACLPolicyFlowClassNotification 1.3.6.1.4.1.6296.102.7.2.5.4.2.3
                         sleACLPolicyFlowAdded 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1
Description.
                         sleACLPolicyFlowDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2
Description.
                         sleACLPolicyAllFlowDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3
Description.
                         sleACLPolicyAllClassDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4
Description.
                         sleACLPolicyAllFlowClassDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5
Description.
             sleV2Security4ACLGroup 1.3.6.1.4.1.6296.102.7.2.5.5
                 sleV2Security4ACLGroupIf 1.3.6.1.4.1.6296.102.7.2.5.5.1
                     sleV2Security4ACLGroupIfTable 1.3.6.1.4.1.6296.102.7.2.5.5.1.1 no-access
Description.
                         sleV2Security4ACLGroupIfEntry 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1 no-access
Description.
                             sleV2Security4ACLGroupIfindex 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1 integer32 read-only
interface index
                             sleV2Security4ACLGroupIfType 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2 integer read-only
The access-list type Enumeration: 'ip': 3, 'mac': 4.
                             sleV2Security4ACLGroupIfName 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3 octet string read-only
The access-list name
                             sleV2Security4ACLGroupIfPriority 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4 integer read-only
The policy priority Enumeration: 'high': 3, 'highest': 4, 'medium': 2, 'low': 1.
                     sleV2Security4ACLGroupIfControl 1.3.6.1.4.1.6296.102.7.2.5.5.1.2
                         sleV2Security4ACLGroupIfControlRequest 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1 integer read-write
The request of a user command Enumeration: 'delSecurityAclGroupIfProfile': 2, 'setSecurityAclGroupIfProfile': 1.
                         sleV2Security4ACLGroupIfControlStatus 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2 slecontrolstatustype read-write
The status of user command
                         sleV2Security4ACLGroupIfControlTimer 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                         sleV2Security4ACLGroupIfControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4 timeticks read-write
The time stamp of the last command(end of command)
                         sleV2Security4ACLGroupIfControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5 slecontrolrequestresulttype read-write
The result of the last user command
                         sleV2Security4ACLGroupIfConrolIndex 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6 integer32 read-write
interface index
                         sleV2Security4ACLGroupIfControlType 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7 integer read-write
The access-list type Enumeration: 'ip': 3, 'mac': 4.
                         sleV2Security4ACLGroupIfControlName 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8 octet string read-write
The access-list name
                         sleV2Security4ACLGroupIfControlPriority 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9 integer read-write
Integer 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priority Enumeration: 'high': 3, 'highest': 4, 'medium': 2, 'low': 1.
                     sleV2SecurityACLGroupIfNotification 1.3.6.1.4.1.6296.102.7.2.5.5.1.3
                         sleV2Security4ACLGroupIfProfileAdd 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1
setSecurityACLGroupIfProfile
                         sleV2Security4ACLGroupIfProfileDelete 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2
delSecurityACLGroupIfProfile
         sleV2SecuritySACL 1.3.6.1.4.1.6296.102.7.2.6
             sleV2SecuritySACLTable 1.3.6.1.4.1.6296.102.7.2.6.1 no-access
ACL table.
                 sleV2SecuritySACLEntry 1.3.6.1.4.1.6296.102.7.2.6.1.1 no-access
key: sleV2SecuritySACLName
                     sleV2SecuritySACLName 1.3.6.1.4.1.6296.102.7.2.6.1.1.1 octetname read-only
Name of this ACL rule
                     sleV2SecuritySACLSrcIpaddr 1.3.6.1.4.1.6296.102.7.2.6.1.1.2 ipaddress read-only
The IP address to match against the packets source IP address
                     sleV2SecuritySACLSrcPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.1.1.3 integer32 read-only
Subnet mask.
                     sleV2SecuritySACLDstIpAddr 1.3.6.1.4.1.6296.102.7.2.6.1.1.4 ipaddress read-only
The IP address to match against the packets destination IP address
                     sleV2SecuritySACLDstPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.1.1.5 integer32 read-only
Subnet mask.
                     sleV2SecuritySACLProtocolType 1.3.6.1.4.1.6296.102.7.2.6.1.1.6 intprotocoltype read-only
The type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2SecuritySACLTcpflag to sleV2SecuritySACLDstL4Port value is available If the value is icmp(1), The value of sleV2SecuritySACLIcmpType and sleV2SecuritySACLIcmpCode is available The value of -1 means any(not set)
                     sleV2SecuritySACLTcpflag 1.3.6.1.4.1.6296.102.7.2.6.1.1.7 bits read-only
TCP flag Bits: 'psh': 4, 'urg': 2, 'ack': 3, 'reserv1': 1, 'syn': 6, 'rst': 5, 'reserv': 0, 'fin': 7.
                     sleV2SecuritySACLSrcL4Port 1.3.6.1.4.1.6296.102.7.2.6.1.1.8 intl4port read-only
The source service port number (only valid for TCP or UDP packet)..
                     sleV2SecuritySACLDstL4Port 1.3.6.1.4.1.6296.102.7.2.6.1.1.9 intl4port read-only
The destination service port number (only valid for TCP or UDP packet).
                     sleV2SecuritySACLIcmpType 1.3.6.1.4.1.6296.102.7.2.6.1.1.10 intprotocoltype read-only
The Type of ICMP message The value of -1 means any(not set)
                     sleV2SecuritySACLIcmpCode 1.3.6.1.4.1.6296.102.7.2.6.1.1.11 intprotocoltype read-only
The code of ICMP message The value of -1 means any(not set)
                     sleV2SecuritySACLPriority 1.3.6.1.4.1.6296.102.7.2.6.1.1.12 integer read-only
The type of ICMP message The value of -1 means any(not set) Enumeration: 'high': 3, 'highest': 4, 'medium': 2, 'low': 1.
                     sleV2SecuritySACLMatchAction 1.3.6.1.4.1.6296.102.7.2.6.1.1.13 integer read-only
Action for packets that match against this ACL rule. Enumeration: 'none': 0, 'deny': 2, 'permit': 1.
                     sleV2SecuritySACLNomatchAction 1.3.6.1.4.1.6296.102.7.2.6.1.1.14 integer read-only
Action for packets that dont match against this ACL rule. Enumeration: 'none': 0, 'deny': 2, 'permit': 1.
             sleV2SecuritySACLControl 1.3.6.1.4.1.6296.102.7.2.6.2
                 sleV2SecuritySACLControlRequest 1.3.6.1.4.1.6296.102.7.2.6.2.1 integer read-write
The request of a user command Enumeration: 'createSAclRule': 1, 'destroySAclRule': 2, 'destroyAllSAclRule': 3.
                 sleV2SecuritySACLControlStatus 1.3.6.1.4.1.6296.102.7.2.6.2.2 slecontrolstatustype read-only
The status of user command
                 sleV2SecuritySACLControlTimer 1.3.6.1.4.1.6296.102.7.2.6.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                 sleV2SecuritySACLControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.6.2.4 timestamp read-only
The time stamp of the last command(end of command)
                 sleV2SecuritySACLControlReqResult 1.3.6.1.4.1.6296.102.7.2.6.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                 sleV2SecuritySACLControlName 1.3.6.1.4.1.6296.102.7.2.6.2.6 octetname read-write
Name of this ACL rule
                 sleV2SecuritySACLControlSrcIpaddr 1.3.6.1.4.1.6296.102.7.2.6.2.7 ipaddress read-write
The IP address to match against the packets source IP address
                 sleV2SecuritySACLControlSrcPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.2.8 intipaddrmask read-write
Subnet mask.
                 sleV2SecuritySACLControlDstIpaddr 1.3.6.1.4.1.6296.102.7.2.6.2.9 ipaddress read-write
The IP address to match against the packets destination IP address
                 sleV2SecuritySACLControlDstPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.2.10 intipaddrmask read-write
Subnet mask.
                 sleV2SecuritySACLControlProtocolType 1.3.6.1.4.1.6296.102.7.2.6.2.11 intprotocoltype read-write
The IP protocol type value
                 sleV2SecuritySACLControlTcpflag 1.3.6.1.4.1.6296.102.7.2.6.2.12 bits read-write
TCP flag Bits: 'psh': 4, 'urg': 2, 'ack': 3, 'reserv1': 1, 'syn': 6, 'rst': 5, 'reserv': 0, 'fin': 7.
                 sleV2SecuritySACLControlSrcL4Port 1.3.6.1.4.1.6296.102.7.2.6.2.13 intl4port read-write
The source service port number (only valid for TCP or UDP packet)..
                 sleV2SecuritySACLControlDstL4Port 1.3.6.1.4.1.6296.102.7.2.6.2.14 intl4port read-write
The destination service port number (only valid for TCP or UDP packet).
                 sleV2SecuritySACLControlIcmpType 1.3.6.1.4.1.6296.102.7.2.6.2.15 intprotocoltype read-write
The type of ICMP message The value of -1 means any(not set)
                 sleV2SecuritySACLControlIcmpCode 1.3.6.1.4.1.6296.102.7.2.6.2.16 intprotocoltype read-write
The code of ICMP message The value of -1 means any(not set)
                 sleV2SecuritySACLControlPriority 1.3.6.1.4.1.6296.102.7.2.6.2.17 integer read-write
The Priority of this ACL rule) Enumeration: 'high': 3, 'highest': 4, 'medium': 2, 'low': 1.
                 sleV2SecuritySACLControlMatchAction 1.3.6.1.4.1.6296.102.7.2.6.2.18 integer read-write
Action for packets that match against this ACL rule. Enumeration: 'none': 0, 'deny': 2, 'permit': 1.
                 sleV2SecuritySACLControlNomatchAction 1.3.6.1.4.1.6296.102.7.2.6.2.19 integer read-write
Action for packets that dont match against this ACL rule. Enumeration: 'none': 0, 'deny': 2, 'permit': 1.
             sleV2SecuritySACLNotification 1.3.6.1.4.1.6296.102.7.2.6.3
                 sleSACLCreated 1.3.6.1.4.1.6296.102.7.2.6.3.1
Description.
                 sleSACLDestroyed 1.3.6.1.4.1.6296.102.7.2.6.3.2
Description.
                 sleSACLAllDestroyed 1.3.6.1.4.1.6296.102.7.2.6.3.3
Description.
         sleV2SecurityACLStatistics 1.3.6.1.4.1.6296.102.7.2.7
             sleV2SecurityACLStatisticsBase 1.3.6.1.4.1.6296.102.7.2.7.1
                 sleV2SecurityACLStatisticsBaseInfo 1.3.6.1.4.1.6296.102.7.2.7.1.1
                     sleV2SecurityACLStatisticsSyslogStatus 1.3.6.1.4.1.6296.102.7.2.7.1.1.1 integer read-only
ACL statistics syslog status Enumeration: 'enable': 1, 'disable': 2.
                 sleV2SecurityACLStatisticsBaseControl 1.3.6.1.4.1.6296.102.7.2.7.1.2
                     sleV2SecurityACLStatisticsBaseControlRequest 1.3.6.1.4.1.6296.102.7.2.7.1.2.1 integer read-write
The request of a user command Enumeration: 'aclSyslogModeChange': 1.
                     sleV2SecurityACLStatisticsBaseControlStatus 1.3.6.1.4.1.6296.102.7.2.7.1.2.2 slecontrolstatustype read-only
The status of user command
                     sleV2SecurityACLStatisticsBaseControlTimer 1.3.6.1.4.1.6296.102.7.2.7.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                     sleV2SecurityACLStatisticsBaseControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.7.1.2.4 timestamp read-only
The time stamp of the last command(end of command)
                     sleV2SecurityACLStatisticsBaseControlReqResult 1.3.6.1.4.1.6296.102.7.2.7.1.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                     sleV2SecurityACLStatisticsBaseControlSyslogMode 1.3.6.1.4.1.6296.102.7.2.7.1.2.6 integer read-write
The ACL statistics syslog mode Enumeration: 'enable': 1, 'disable': 2.
                 sleV2SecurityACLStatisticsBaseNotification 1.3.6.1.4.1.6296.102.7.2.7.1.3
                     sleV2SecurityACLStatisticsSyslogModeChanged 1.3.6.1.4.1.6296.102.7.2.7.1.3.1
Description.
             sleV2SecurityACLStatisticsPacketHistory 1.3.6.1.4.1.6296.102.7.2.7.2
                 sleV2SecurityACLPacketCountTable 1.3.6.1.4.1.6296.102.7.2.7.2.1 no-access
ACL packet count table.
                     sleV2SecurityACLPacketCountEntry 1.3.6.1.4.1.6296.102.7.2.7.2.1.1 no-access
key: sleV2SecuritySACLName
                         sleV2SecurityACLTotalPacket 1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1 counter64 read-only
ACL total packet
                 sleV2SecurityACLSrcHistoryTable 1.3.6.1.4.1.6296.102.7.2.7.2.2 no-access
ACL source history table.
                     sleV2SecurityACLSrcHistoryEntry 1.3.6.1.4.1.6296.102.7.2.7.2.2.1 no-access
key: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex
                         sleV2SecurityACLSrcHistoryIndex 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1 integer32 read-only
The ACL index.
                         sleV2SecurityACLSrcHistoryIpAddr 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2 ipaddress read-only
The ACl IP address
                 sleV2SecurityACLStatisticsControl 1.3.6.1.4.1.6296.102.7.2.7.2.3
                     sleV2SecurityACLStatisticsControlRequest 1.3.6.1.4.1.6296.102.7.2.7.2.3.1 integer read-write
The request of a user command Enumeration: 'clearAruleStatus': 1.
                     sleV2SecurityACLStatisticsControlStatus 1.3.6.1.4.1.6296.102.7.2.7.2.3.2 slecontrolstatustype read-only
The status of user command
                     sleV2SecurityACLStatisticsControlTimer 1.3.6.1.4.1.6296.102.7.2.7.2.3.3 gauge32 read-write
The maximum time for the manager for a long running user command
                     sleV2SecurityACLStatisticsControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.7.2.3.4 timestamp read-only
The time stamp of the last command(end of command)
                     sleV2SecurityACLStatisticsControlReqResult 1.3.6.1.4.1.6296.102.7.2.7.2.3.5 slecontrolrequestresulttype read-only
The result of the last user command
                     sleV2SecurityACLStatisticsControlName 1.3.6.1.4.1.6296.102.7.2.7.2.3.6 octetname read-write
The ACL statistics name
                 sleV2SecurityACLStatisticsNotification 1.3.6.1.4.1.6296.102.7.2.7.2.4
                     sleV2SecurityACLStatisticsCleared 1.3.6.1.4.1.6296.102.7.2.7.2.4.1
Description.
         sleV2CpuPacketFilter 1.3.6.1.4.1.6296.102.7.2.8
             sleV2CpuPacketFilterTable 1.3.6.1.4.1.6296.102.7.2.8.1 no-access
cpu packet filter table.
                 sleV2CpuPacketFilterEntry 1.3.6.1.4.1.6296.102.7.2.8.1.1 no-access
key: sleV2CpuPacketFilterIndex
                     sleV2CpuPacketFilterIndex 1.3.6.1.4.1.6296.102.7.2.8.1.1.1 integer32 read-only
The index of cpu packet filter
                     sleV2CpuPacketFilterName 1.3.6.1.4.1.6296.102.7.2.8.1.1.2 octet string read-only
The name of cpu packet filter
                     sleV2CpuPacketFilterCreationTime 1.3.6.1.4.1.6296.102.7.2.8.1.1.3 counter32 read-only
The creation time. (unit : sec)
                     sleV2CpuPacketFilterElapsedtimeAfterClear 1.3.6.1.4.1.6296.102.7.2.8.1.1.4 counter32 read-only
The elapsed time after clear (unit : sec)
                     sleV2CpuPacketFilterStage 1.3.6.1.4.1.6296.102.7.2.8.1.1.5 integer read-only
The stage of cpu packet filter. Enumeration: 'porttx': 4, 'unknown': 255, 'cpuingress': 1, 'portrx': 3, 'cpuegress': 2, 'vlanAssigned': 5.
                     sleV2CpuPacketFilterPriority 1.3.6.1.4.1.6296.102.7.2.8.1.1.6 integer32 read-only
The priority of cpu packet filter.
                     sleV2CpuPacketFilterAction 1.3.6.1.4.1.6296.102.7.2.8.1.1.7 integer read-only
The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove Enumeration: 'dot1q': 5, 'unknown': 255, 'drop': 1, 'dot1qDetach': 7, 'rateLimit': 3, 'dot1qAttach': 6, 'pass': 4, 'permit': 2.
                     sleV2CpuPacketFilterActionRateLimit 1.3.6.1.4.1.6296.102.7.2.8.1.1.8 integer32 read-only
The allowed-packet count per second.
                     sleV2CpuPacketFilterActionBurstSize 1.3.6.1.4.1.6296.102.7.2.8.1.1.9 integer32 read-only
The burst-allowed-packet count.
                     sleV2CpuPacketFilterActionTpid 1.3.6.1.4.1.6296.102.7.2.8.1.1.10 integer32 read-only
The Action TPID The value 65535(0xffff) means any.
                     sleV2CpuPacketFilterActionPcp 1.3.6.1.4.1.6296.102.7.2.8.1.1.11 integer32 read-only
The Action PCP. The value 255(0xff) means any.
                     sleV2CpuPacketFilterActionVid 1.3.6.1.4.1.6296.102.7.2.8.1.1.12 integer32 read-only
The Action VID The value 65535(0xffff) means any.
                     sleV2CpuPacketFilterActionTagPosition 1.3.6.1.4.1.6296.102.7.2.8.1.1.13 integer32 read-only
The Action tag position. 1 s-vlan 2 c-vlan
             sleV2CpuPacketFilterMatchTable 1.3.6.1.4.1.6296.102.7.2.8.2 no-access
cpu packet filter match table.
                 sleV2CpuPacketFilterMatchEntry 1.3.6.1.4.1.6296.102.7.2.8.2.1 no-access
key: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex
                     sleV2CpuPacketFilterMatchIndex 1.3.6.1.4.1.6296.102.7.2.8.2.1.1 integer32 read-only
The match entry Index
                     sleV2CpuPacketFilterMatchType 1.3.6.1.4.1.6296.102.7.2.8.2.1.2 bits read-only
The match classifiter type. Bits: 'dot1q': 4, 'cos': 1, 'port': 2, 'vid': 0, 'offset': 3.
                     sleV2CpuPacketFilterMatchCos 1.3.6.1.4.1.6296.102.7.2.8.2.1.3 octet string read-only
The matched CoS Queue.
                     sleV2CpuPacketFilterMatchPort 1.3.6.1.4.1.6296.102.7.2.8.2.1.4 octet string read-only
The matched port index.
                     sleV2CpuPacketFilterMatchVidmap 1.3.6.1.4.1.6296.102.7.2.8.2.1.5 octet string read-only
The matched VID.
                     sleV2CpuPacketFilterMatchTagPosition 1.3.6.1.4.1.6296.102.7.2.8.2.1.6 integer32 read-only
The matched tag position.
                     sleV2CpuPacketFilterMatchTpid 1.3.6.1.4.1.6296.102.7.2.8.2.1.7 integer32 read-only
The matched TPID.
                     sleV2CpuPacketFilterMatchPcp 1.3.6.1.4.1.6296.102.7.2.8.2.1.8 integer32 read-only
The matched PCP
                     sleV2CpuPacketFilterMatchVid 1.3.6.1.4.1.6296.102.7.2.8.2.1.9 integer32 read-only
The matched VID
                     sleV2CpuPacketFilterMatchOffset 1.3.6.1.4.1.6296.102.7.2.8.2.1.10 integer32 read-only
The matched offset
                     sleV2CpuPacketFilterMatchLength 1.3.6.1.4.1.6296.102.7.2.8.2.1.11 integer32 read-only
The matched Length
                     sleV2CpuPacketFilterMatchData 1.3.6.1.4.1.6296.102.7.2.8.2.1.12 octet string read-only
The matched data. (HEX string)
                     sleV2CpuPacketFilterMatchMask 1.3.6.1.4.1.6296.102.7.2.8.2.1.13 octet string read-only
The matched mask. (HEX string)
                     sleV2CpuPacketFilterMatchDesc 1.3.6.1.4.1.6296.102.7.2.8.2.1.14 octet string read-only
The matched Description
             sleV2CpuPacketFilterControl 1.3.6.1.4.1.6296.102.7.2.8.3
                 sleV2CpuPacketFilterControlRequest 1.3.6.1.4.1.6296.102.7.2.8.3.1 integer read-write
The request of a user command Enumeration: 'delMatch': 5, 'addCpuPktFilter': 1, 'addMatch': 4, 'delCpuPktfilter': 2, 'setAction': 3.
                 sleV2CpuPacketFilterControlStatus 1.3.6.1.4.1.6296.102.7.2.8.3.2 slecontrolstatustype read-only
The status of user command
                 sleV2CpuPacketFilterControlTimer 1.3.6.1.4.1.6296.102.7.2.8.3.3 gauge32 read-write
The maximum time for the manager for a long running user command
                 sleV2CpuPacketFilterControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.8.3.4 timestamp read-only
The time stamp of the last command(end of command)
                 sleV2CpuPacketFilterControlReqResult 1.3.6.1.4.1.6296.102.7.2.8.3.5 slecontrolrequestresulttype read-only
The result of the last user command
                 sleV2CpuPacketFilterControlIndex 1.3.6.1.4.1.6296.102.7.2.8.3.6 integer32 read-write
The match entry Index
                 sleV2CpuPacketFilterControlName 1.3.6.1.4.1.6296.102.7.2.8.3.7 octet string read-write
Cpu packet filter name.
                 sleV2CpuPacketFilterControlStage 1.3.6.1.4.1.6296.102.7.2.8.3.8 integer read-write
The stage of cpu packet filter. Enumeration: 'porttx': 4, 'unknown': 255, 'cpuingress': 1, 'portrx': 3, 'cpuegress': 2, 'vlanAssigned': 5.
                 sleV2CpuPacketFilterControlPriority 1.3.6.1.4.1.6296.102.7.2.8.3.9 integer32 read-write
The priority of cpu packet filter.
                 sleV2CpuPacketFilterControlAction 1.3.6.1.4.1.6296.102.7.2.8.3.10 integer read-write
The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove Enumeration: 'dot1q': 5, 'unknown': 255, 'drop': 1, 'dot1qDetach': 7, 'rateLimit': 3, 'dot1qAttach': 6, 'pass': 4, 'permit': 2.
                 sleV2CpuPacketFilterControlActionRateLimit 1.3.6.1.4.1.6296.102.7.2.8.3.11 integer32 read-write
The allowed-packet count per second.
                 sleV2CpuPacketFilterControlActionBurstSize 1.3.6.1.4.1.6296.102.7.2.8.3.12 integer32 read-write
The burst-allowed-packet count.
                 sleV2CpuPacketFilterControlActionTpid 1.3.6.1.4.1.6296.102.7.2.8.3.13 integer32 read-write
The Action TPID The value 65535(0xffff) means any.
                 sleV2CpuPacketFilterControlActionPcp 1.3.6.1.4.1.6296.102.7.2.8.3.14 integer32 read-write
The Action PCP. The value 255(0xff) means any.
                 sleV2CpuPacketFilterControlActionVid 1.3.6.1.4.1.6296.102.7.2.8.3.15 integer32 read-write
The Action VID The value 65535(0xffff) means any.
                 sleV2CpuPacketFilterControlActionTagPosition 1.3.6.1.4.1.6296.102.7.2.8.3.16 integer32 read-write
The Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2.
                 sleV2CpuPacketFilterControlMatchType 1.3.6.1.4.1.6296.102.7.2.8.3.17 bits read-write
The match classifiter type. Bits: 'dot1q': 4, 'cos': 1, 'port': 2, 'vid': 0, 'offset': 3.
                 sleV2CpuPacketFilterControlMatchCos 1.3.6.1.4.1.6296.102.7.2.8.3.18 octet string read-write
The matched CoS Queue. M2200 doesn't use
                 sleV2CpuPacketFilterControlMatchPort 1.3.6.1.4.1.6296.102.7.2.8.3.19 octet string read-write
The matched port index.
                 sleV2CpuPacketFilterControlMatchVidmap 1.3.6.1.4.1.6296.102.7.2.8.3.20 octet string read-write
The matched VID M2200 doesn't use
                 sleV2CpuPacketFilterControlMatchTagPosition 1.3.6.1.4.1.6296.102.7.2.8.3.21 integer32 read-write
The matched tag position M2200 doesn't use
                 sleV2CpuPacketFilterControlMatchTpid 1.3.6.1.4.1.6296.102.7.2.8.3.22 integer32 read-write
The matched TPID.
                 sleV2CpuPacketFilterControlMatchPcp 1.3.6.1.4.1.6296.102.7.2.8.3.23 integer32 read-write
The matched PCP
                 sleV2CpuPacketFilterControlMatchVid 1.3.6.1.4.1.6296.102.7.2.8.3.24 integer32 read-write
The matched VID
                 sleV2CpuPacketFilterControlMatchOffset 1.3.6.1.4.1.6296.102.7.2.8.3.25 integer32 read-write
The matched offset
                 sleV2CpuPacketFilterControlMatchLength 1.3.6.1.4.1.6296.102.7.2.8.3.26 integer32 read-write
The matched Length
                 sleV2CpuPacketFilterControlMatchData 1.3.6.1.4.1.6296.102.7.2.8.3.27 octet string read-write
he matched data. (HEX string)
                 sleV2CpuPacketFilterControlMatchMask 1.3.6.1.4.1.6296.102.7.2.8.3.28 octet string read-write
The matched mask. (HEX string)
                 sleV2CpuPacketFilterControlMatchDesc 1.3.6.1.4.1.6296.102.7.2.8.3.29 octet string read-write
The matched Description
             sleV2CpuPacketFilterNotification 1.3.6.1.4.1.6296.102.7.2.8.4
                 sleV2CpuPacketFilterAdded 1.3.6.1.4.1.6296.102.7.2.8.4.1
Description.
                 sleV2CpuPacketFilterDeleted 1.3.6.1.4.1.6296.102.7.2.8.4.2
Description.
                 sleV2CpuPacketFilterActionChanged 1.3.6.1.4.1.6296.102.7.2.8.4.3
Description.
                 sleV2CpuPacketFilterMatchChanged 1.3.6.1.4.1.6296.102.7.2.8.4.4
Description.
         sleV2VlanOperation 1.3.6.1.4.1.6296.102.7.2.9
             sleV2VlanOperationTable 1.3.6.1.4.1.6296.102.7.2.9.1 no-access
Description.
                 sleV2VlanOperationEntry 1.3.6.1.4.1.6296.102.7.2.9.1.1 no-access
Description.
                     sleV2VlanOperationIndex 1.3.6.1.4.1.6296.102.7.2.9.1.1.1 integer32 read-only
The vlan operation index.
                     sleV2VlanOperationName 1.3.6.1.4.1.6296.102.7.2.9.1.1.2 octet string read-only
The vlan operation name
                     sleV2VlanOperationStage 1.3.6.1.4.1.6296.102.7.2.9.1.1.3 integer read-only
The vlan operation stage. Enumeration: 'ingressSlowPath': 1, 'egressSlowPath': 2.
                     sleV2VlanOperationProiroty 1.3.6.1.4.1.6296.102.7.2.9.1.1.4 integer32 read-only
The vlan operation priority.
                     sleV2VlanOperationPort 1.3.6.1.4.1.6296.102.7.2.9.1.1.5 octet string read-only
The vlan operation ports
                     sleV2VlanOperationOuterVlan 1.3.6.1.4.1.6296.102.7.2.9.1.1.6 octet string read-only
The Outer vlan.
                     sleV2VlanOperationInnerVlan 1.3.6.1.4.1.6296.102.7.2.9.1.1.7 octet string read-only
The inner Vlan.
                     sleV2VlanOperationEtherType 1.3.6.1.4.1.6296.102.7.2.9.1.1.8 integer32 read-only
The vlan operation ether-type.
                     sleV2VlanOperationIpProtocol 1.3.6.1.4.1.6296.102.7.2.9.1.1.9 integer32 read-only
The vlan operation IP Protocol
                     sleV2VlanOperationArpSip 1.3.6.1.4.1.6296.102.7.2.9.1.1.10 octet string read-only
The vlan operation source-IPaddress.
                     sleV2VlanOperationArpSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.1.1.11 integer32 read-only
The vlan operation source-IPAddress prefix-length.
                     sleV2VlanOperationSip 1.3.6.1.4.1.6296.102.7.2.9.1.1.12 octet string read-only
The vlan operation Source-IPaddress.
                     sleV2VlanOperationSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.1.1.13 integer32 read-only
The vlan operation Source-IPAddress prefix-length.
                     sleV2VlanOperationDip 1.3.6.1.4.1.6296.102.7.2.9.1.1.14 octet string read-only
The vlan operation Destination-IPaddress.
                     sleV2VlanOperationDipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.1.1.15 integer32 read-only
The vlan operation Destination-IPAddress prefix-length.
                     sleV2VlanOperationAction 1.3.6.1.4.1.6296.102.7.2.9.1.1.16 integer read-only
The vlan-operation action types. Enumeration: 'removeServiceVlanTag': 3, 'addCustomerVlanTag': 4, 'replaceCustomerVlanID': 5, 'replaceServiceVlanID': 2, 'addServiceVlanTag': 1, 'removeCustomerVlanTag': 6.
                     sleV2VlanOperationActionVid 1.3.6.1.4.1.6296.102.7.2.9.1.1.17 integer32 read-only
The vlan operation action-vid.
             sleV2VlanOperationControl 1.3.6.1.4.1.6296.102.7.2.9.2
                 sleV2VlanOperationControlRequest 1.3.6.1.4.1.6296.102.7.2.9.2.1 integer read-write
The request of a user command Enumeration: 'addVlanOperation': 1, 'delVlanOperation': 2.
                 sleV2VlanOperationControlStatus 1.3.6.1.4.1.6296.102.7.2.9.2.2 slecontrolstatustype read-only
The status of user command
                 sleV2VlanOperationControlTimer 1.3.6.1.4.1.6296.102.7.2.9.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                 sleV2VlanOperationControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.9.2.4 timeticks read-only
The time stamp of the last command(end of command)
                 sleV2VlanOperationControlReqResult 1.3.6.1.4.1.6296.102.7.2.9.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                 sleV2VlanOperationControlIndex 1.3.6.1.4.1.6296.102.7.2.9.2.6 integer32 read-write
The vlan operation index.
                 sleV2VlanOperationControlName 1.3.6.1.4.1.6296.102.7.2.9.2.7 octet string read-write
The vlan operation name
                 sleV2VlanOperationControlStage 1.3.6.1.4.1.6296.102.7.2.9.2.8 integer read-write
The vlan operation stage. Enumeration: 'ingressSlowPath': 1, 'egressSlowPath': 2.
                 sleV2VlanOperationControlProiroty 1.3.6.1.4.1.6296.102.7.2.9.2.9 integer32 read-write
The vlan operation priority.
                 sleV2VlanOperationControlPort 1.3.6.1.4.1.6296.102.7.2.9.2.10 octet string read-write
The vlan operation ports
                 sleV2VlanOperationControlOuterVlan 1.3.6.1.4.1.6296.102.7.2.9.2.11 octet string read-write
The Outer vlan.
                 sleV2VlanOperationControlInnerVlan 1.3.6.1.4.1.6296.102.7.2.9.2.12 octet string read-write
The Inner vlan.
                 sleV2VlanOperationControlEtherType 1.3.6.1.4.1.6296.102.7.2.9.2.13 integer32 read-write
The vlan operation ether-type.
                 sleV2VlanOperationControlIpProtocol 1.3.6.1.4.1.6296.102.7.2.9.2.14 integer32 read-write
The vlan operation IP Protocol
                 sleV2VlanOperationControlArpSip 1.3.6.1.4.1.6296.102.7.2.9.2.15 octet string read-write
The vlan operation source-IPaddress.
                 sleV2VlanOperationControlArpSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.2.16 integer32 read-write
The vlan operation source-IPAddress prefix-length.
                 sleV2VlanOperationControlSip 1.3.6.1.4.1.6296.102.7.2.9.2.17 octet string read-write
The vlan operation Source-IPaddress.
                 sleV2VlanOperationControlSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.2.18 integer32 read-write
The vlan operation Source-IPAddress prefix-length.
                 sleV2VlanOperationControlDip 1.3.6.1.4.1.6296.102.7.2.9.2.19 octet string read-write
The vlan operation Destination-IPaddress.
                 sleV2VlanOperationControlDipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.2.20 integer32 read-write
The vlan operation Destination-IPAddress prefix-length.
                 sleV2VlanOperationControlAction 1.3.6.1.4.1.6296.102.7.2.9.2.21 integer read-write
The vlan-operation action types. Enumeration: 'removeServiceVlanTag': 3, 'addCustomerVlanTag': 4, 'replaceCustomerVlanID': 5, 'replaceServiceVlanID': 2, 'addServiceVlanTag': 1, 'removeCustomerVlanTag': 6.
                 sleV2VlanOperationControlActionVid 1.3.6.1.4.1.6296.102.7.2.9.2.22 integer32 read-write
The vlan operation action-vid.
             sleV2VlanOperationNotification 1.3.6.1.4.1.6296.102.7.2.9.3
                 sleV2VlanOperationCreated 1.3.6.1.4.1.6296.102.7.2.9.3.1
addVlanOperation
                 sleV2VlanOperationDeleted 1.3.6.1.4.1.6296.102.7.2.9.3.2
delVlanOperation
         sleV2EthernetService 1.3.6.1.4.1.6296.102.7.2.10
               sleV2EthernetServiceBase 1.3.6.1.4.1.6296.102.7.2.10.1
                   sleV2EthernetServiceEnableStatus 1.3.6.1.4.1.6296.102.7.2.10.1.1 integer read-only
The ethernet service mode status. Enumeration: 'rt': 1, 'none': 0, 'cot': 2.
                   sleV2EthernetServiceEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.1.2 integer read-only
The global management access status ( only in RT mode ) Enumeration: 'enable': 1, 'disable': 2.
                   sleV2EthernetServiceHealthCheckPort 1.3.6.1.4.1.6296.102.7.2.10.1.3 octet string read-only
The health check port of uplink. ( only in COT mode )
                   sleV2EthernetServiceHealthCheckVid 1.3.6.1.4.1.6296.102.7.2.10.1.4 octet string read-only
The health check vid of uplink. ( only in COT mode )
               sleV2EthernetServiceTable 1.3.6.1.4.1.6296.102.7.2.10.2 no-access
Description.
                   sleV2EthernetServiceEntry 1.3.6.1.4.1.6296.102.7.2.10.2.1 no-access
Description.
                       sleV2EthernetServiceSid 1.3.6.1.4.1.6296.102.7.2.10.2.1.1 integer read-only
The unique number is given by service identifier.
                       sleV2EthernetServiceType 1.3.6.1.4.1.6296.102.7.2.10.2.1.2 integer read-only
The ethernet service type 1: unicast 2: multicast Enumeration: 'unicast': 1, 'multicast': 2.
                       sleV2EthernetServiceRtCustomerPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.3 octet string read-only
The Configuring service's customer port for RT mode.
                       sleV2EthernetServiceRtCustomerVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.4 octet string read-only
The Configuring service's customer vid for RT mode.
                       sleV2EthernetServiceRtNetworkPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.5 octet string read-only
The Configuring service's network port for RT mode.
                       sleV2EthernetServiceRtNetworkVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.6 octet string read-only
The Configuring service's network vid for RT mode.
                       sleV2EthernetServiceRtEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.2.1.7 integer read-only
Description. Enumeration: 'enable': 1, 'disable': 2.
                       sleV2EthernetServiceCotExternalPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.8 octet string read-only
The Configuring service's external port for COT mode.
                       sleV2EthernetServiceCotExternalVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.9 octet string read-only
The Configuring service's external vid for COT mode.
                       sleV2EthernetServiceCotInternalPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.10 octet string read-only
The Configuring service's internal port for COT mode.
                       sleV2EthernetServiceCotInternalVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.11 octet string read-only
The Configuring service's internal vid for COT mode.
               sleV2EthernetServiceControl 1.3.6.1.4.1.6296.102.7.2.10.3
                   sleV2EthernetServiceControlRequest 1.3.6.1.4.1.6296.102.7.2.10.3.1 integer read-write
The request of a user command Enumeration: 'setSidForCOT': 6, 'delService': 7, 'setEnableStatus': 1, 'setHealthCheck': 3, 'delHealthCheck': 4, 'setSidForRT': 5, 'setEnableManagement': 2.
                   sleV2EthernetServiceControlStatus 1.3.6.1.4.1.6296.102.7.2.10.3.2 slecontrolstatustype read-only
The status of user command
                   sleV2EthernetServiceControlTimer 1.3.6.1.4.1.6296.102.7.2.10.3.3 gauge32 read-write
The maximum time for the manager for a long running user command
                   sleV2EthernetServiceControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.10.3.4 timeticks read-only
The time stamp of the last command(end of command)
                   sleV2EthernetServiceControlReqResult 1.3.6.1.4.1.6296.102.7.2.10.3.5 slecontrolrequestresulttype read-only
The result of the last user command
                   sleV2EthernetServiceControlEnableStatus 1.3.6.1.4.1.6296.102.7.2.10.3.6 integer read-write
The ethernet service mode status. Enumeration: 'rt': 1, 'none': 0, 'cot': 2.
                   sleV2EthernetServiceControlEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.3.7 integer read-write
The local management access status ( only in RT mode ) Enumeration: 'enable': 1, 'disable': 2.
                   sleV2EthernetServiceControlHealthCheckPort 1.3.6.1.4.1.6296.102.7.2.10.3.8 octet string read-write
The health check port of uplink. ( only in COT mode )
                   sleV2EthernetServiceControlHealthCheckVid 1.3.6.1.4.1.6296.102.7.2.10.3.9 octet string read-write
The health check vid of uplink. ( only in COT mode )
                   sleV2EthernetServiceControlSid 1.3.6.1.4.1.6296.102.7.2.10.3.10 integer read-write
The unique number is given by service identifier.
                   sleV2EthernetServiceControlType 1.3.6.1.4.1.6296.102.7.2.10.3.11 integer read-write
The ethernet service type 1: unicast 2: multicast Enumeration: 'unicast': 1, 'multicast': 2.
                   sleV2EthernetServiceControlRtCustomerPort 1.3.6.1.4.1.6296.102.7.2.10.3.12 octet string read-write
The Configuring service's customer port for RT mode.
                   sleV2EthernetServiceControlRtCustomerVid 1.3.6.1.4.1.6296.102.7.2.10.3.13 octet string read-write
The Configuring service's customer vid for RT mode.
                   sleV2EthernetServiceControlRtNetworkPort 1.3.6.1.4.1.6296.102.7.2.10.3.14 octet string read-write
The Configuring service's network port for RT mode.
                   sleV2EthernetServiceControlRtNetworkVid 1.3.6.1.4.1.6296.102.7.2.10.3.15 octet string read-write
The Configuring service's network vid for RT mode.
                   sleV2EthernetServiceControlRtEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.3.16 integer read-write
Description. Enumeration: 'enable': 1, 'disable': 2.
                   sleV2EthernetServiceControlCotExternalPort 1.3.6.1.4.1.6296.102.7.2.10.3.17 octet string read-write
The Configuring service's external port for COT mode.
                   sleV2EthernetServiceControlCotExternalVid 1.3.6.1.4.1.6296.102.7.2.10.3.18 octet string read-write
The Configuring service's external vid for COT mode.
                   sleV2EthernetServiceControlCotInternalPort 1.3.6.1.4.1.6296.102.7.2.10.3.19 octet string read-write
The Configuring service's internal port for COT mode.
                   sleV2EthernetServiceControlCotInternalVid 1.3.6.1.4.1.6296.102.7.2.10.3.20 octet string read-write
The Configuring service's internal vid for COT mode.
               sleV2EthernetServiceNotification 1.3.6.1.4.1.6296.102.7.2.10.4
                   sleV2EthernetServiceEnableStatusChanged 1.3.6.1.4.1.6296.102.7.2.10.4.1
setEnableStatus
                   sleV2EthernetServiceEnableManagementChanged 1.3.6.1.4.1.6296.102.7.2.10.4.2
setEnableManagement
                   sleV2EthernetServiceHealthCheckChanged 1.3.6.1.4.1.6296.102.7.2.10.4.3
setHealthCheck
                   sleV2EthernetServiceHealthCheckDeleted 1.3.6.1.4.1.6296.102.7.2.10.4.4
delHealthCheck
                   sleV2EthernetServiceSidForRtModeCreated 1.3.6.1.4.1.6296.102.7.2.10.4.5
setSidForRT
                   sleV2EthernetServiceSidForCotModeCreated 1.3.6.1.4.1.6296.102.7.2.10.4.6
setSidForCOT
                   sleV2EthernetServiceSidDeleted 1.3.6.1.4.1.6296.102.7.2.10.4.7
delService
     sleV2Security6 1.3.6.1.4.1.6296.102.7.3
     sleV2SecurityGroup 1.3.6.1.4.1.6296.102.7.4
Description.
     sleV2SecurityNotificationGroup 1.3.6.1.4.1.6296.102.7.5
Description.