SLE-PM-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: SLE-PM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, DASAN-SMI, SLE-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 slePmMgr 1.3.6.1.4.1.6296.101.94
This MIB contains all needed informations about Performance Manager.
       slePmNeId 1.3.6.1.4.1.6296.101.94.1 octet string read-only
system MAC address
       slePmConfigBase 1.3.6.1.4.1.6296.101.94.2
           slePmConfigTable 1.3.6.1.4.1.6296.101.94.2.1 no-access
This table is the Performance Config table. It gets populated when system init is done. And it contains all the class performance supported for the device
               slePmConfigEntry 1.3.6.1.4.1.6296.101.94.2.1.1 no-access
                   slePmConfigSeqId 1.3.6.1.4.1.6296.101.94.2.1.1.1 integer read-only
Description.
                   slePmConfigClassId 1.3.6.1.4.1.6296.101.94.2.1.1.2 pmclassid read-only
Class ID starts from 1 to 255 for the system. And these IDs are generated internally
                   slePmConfigPmId 1.3.6.1.4.1.6296.101.94.2.1.1.3 pmid read-only
Current PM ID
                   slePmConfigSource 1.3.6.1.4.1.6296.101.94.2.1.1.4 pmsrc read-only
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
                   slePmConfigTcaStat 1.3.6.1.4.1.6296.101.94.2.1.1.5 integer read-only
TCA status TCA Normal (0) TCA Occur (1) Enumeration: 'tcaOccur': 1, 'tcaNormal': 0.
                   slePmConfigTcaEnable 1.3.6.1.4.1.6296.101.94.2.1.1.6 pmtcastate read-only
TCA enable Confguration : enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user.
                   slePmConfigTh15Min 1.3.6.1.4.1.6296.101.94.2.1.1.7 counter64 read-only
15minute Performance TCA threshold configuration count
                   slePmConfigTh1Day 1.3.6.1.4.1.6296.101.94.2.1.1.8 counter64 read-write
1day Performance TCA threshold configuration count
           slePmConfigControl 1.3.6.1.4.1.6296.101.94.2.2
               slePmConfigControlRequest 1.3.6.1.4.1.6296.101.94.2.2.1 integer read-write
The configuration commands, and user can configure functions via setting this entry as proper value. Enumeration: 'setPmConfigTcaEnable': 1, 'setPmConfigTh15Min': 2, 'setPmConfigTh1Day': 3.
               slePmConfigControlStatus 1.3.6.1.4.1.6296.101.94.2.2.2 slecontrolstatustype read-only
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
               slePmConfigControlTimer 1.3.6.1.4.1.6296.101.94.2.2.3 gauge32 read-write
the wait-time until setRequest end. In case of short-time command, this value is 0
               slePmConfigControlTimeStamp 1.3.6.1.4.1.6296.101.94.2.2.4 timeticks read-only
the time stamp of the last command. (don.t care)
               slePmConfigControlReqResult 1.3.6.1.4.1.6296.101.94.2.2.5 slecontrolrequestresulttype read-only
Result of the last command.
               slePmConfigControlSeqId 1.3.6.1.4.1.6296.101.94.2.2.6 integer32 read-write
PM Manager Class ID
               slePmConfigControlTcaEnable 1.3.6.1.4.1.6296.101.94.2.2.7 pmtcastate read-write
TCA enable Confguration : enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user.
               slePmConfigControlTh15Min 1.3.6.1.4.1.6296.101.94.2.2.8 counter64 read-write
15minute Performance TCA threshold configuration count
               slePmConfigControlTh1Day 1.3.6.1.4.1.6296.101.94.2.2.9 counter64 read-write
1day Performance TCA threshold configuration count
           slePmConfigNotification 1.3.6.1.4.1.6296.101.94.2.3
               slePmConfigTcaEnableChanged 1.3.6.1.4.1.6296.101.94.2.3.1
Notification for Tca Enable change
               slePmConfigTh15MinChanged 1.3.6.1.4.1.6296.101.94.2.3.2
Notification for 15minute theshold change
               slePmConfigTh1DayChanged 1.3.6.1.4.1.6296.101.94.2.3.3
Notification for 1day theshold change
       slePmCurrentBase 1.3.6.1.4.1.6296.101.94.3
           slePmCurrentTable 1.3.6.1.4.1.6296.101.94.3.1 no-access
This table contains the current PM count.
               slePmCurrentEntry 1.3.6.1.4.1.6296.101.94.3.1.1 no-access
                   slePmCurrentSeqId 1.3.6.1.4.1.6296.101.94.3.1.1.1 integer read-only
Description.
                   slePmCurrentClassId 1.3.6.1.4.1.6296.101.94.3.1.1.2 pmclassid read-only
Current Class ID
                   slePmCurrentPmId 1.3.6.1.4.1.6296.101.94.3.1.1.3 pmid read-only
Current PM ID
                   slePmCurrentSource 1.3.6.1.4.1.6296.101.94.3.1.1.4 pmsrc read-only
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
                   slePmCurrentTerm 1.3.6.1.4.1.6296.101.94.3.1.1.5 integer read-write
Description. Enumeration: 'day1': 2, 'min15': 1.
                   slePmCurrentPmCount 1.3.6.1.4.1.6296.101.94.3.1.1.6 counter64 read-only
Current Performance count
                   slePmCurrentAccSecond 1.3.6.1.4.1.6296.101.94.3.1.1.7 counter32 read-only
Current Performance data accumulation seconds(count)
                   slePmCurrentTcaStat 1.3.6.1.4.1.6296.101.94.3.1.1.8 integer read-only
TCA status TCA Normal (0) TCA Occur (1) Enumeration: 'tcaOccur': 1, 'tcaNormal': 0.
                   slePmCurrentTcaTime 1.3.6.1.4.1.6296.101.94.3.1.1.9 timeticks read-only
Current PM Time and Date
           slePmCurrentControl 1.3.6.1.4.1.6296.101.94.3.2
               slePmCurrentControlRequest 1.3.6.1.4.1.6296.101.94.3.2.1 integer read-write
The configuration commands, and user can configure functions via setting this entry as proper value. clearCurrentPm(1): Clears the current Performance count (both 15min and 1day) PM history(accumulation) count is not cleared clearCurrentTca(2): Clears the current Performance TCA flag (both 15min and 1day) Enumeration: 'clearCurrentPm': 1, 'clearCurrentTca': 2.
               slePmCurrentControlStatus 1.3.6.1.4.1.6296.101.94.3.2.2 slecontrolstatustype read-only
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
               slePmCurrentControlTimer 1.3.6.1.4.1.6296.101.94.3.2.3 gauge32 read-write
the wait-time until setRequest end. In case of short-time command, this value is 0
               slePmCurrentControlTimeStamp 1.3.6.1.4.1.6296.101.94.3.2.4 timeticks read-only
the time stamp of the last command. (don.t care)
               slePmCurrentControlReqResult 1.3.6.1.4.1.6296.101.94.3.2.5 slecontrolrequestresulttype read-only
Result of the last command.
           slePmCurrentNotification 1.3.6.1.4.1.6296.101.94.3.3
               slePmCurrentPmCleared 1.3.6.1.4.1.6296.101.94.3.3.1
Notification for current PM clear
       slePMHistoryBase 1.3.6.1.4.1.6296.101.94.4
           slePmHistoryTable 1.3.6.1.4.1.6296.101.94.4.1 no-access
This Table is used to for keeping the PM History
               slePmHistoryEntry 1.3.6.1.4.1.6296.101.94.4.1.1 no-access
                   slePmHistorySeqId 1.3.6.1.4.1.6296.101.94.4.1.1.1 integer read-only
Description.
                   slePmHistoryClassId 1.3.6.1.4.1.6296.101.94.4.1.1.2 pmclassid read-only
History Class ID.
                   slePmHistoryPmId 1.3.6.1.4.1.6296.101.94.4.1.1.3 pmid read-only
History PM Id
                   slePmHistoryPmSource 1.3.6.1.4.1.6296.101.94.4.1.1.4 pmsrc read-only
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
                   slePmHistoryTerm 1.3.6.1.4.1.6296.101.94.4.1.1.5 integer read-only
Description. Enumeration: 'day1': 2, 'min15': 1.
                   slePmHistoryIndex 1.3.6.1.4.1.6296.101.94.4.1.1.6 integer read-only
History Index: 15min : 1 ~ 96, 1-day : 1 ~ 7
                   slePmHistoryPmCount 1.3.6.1.4.1.6296.101.94.4.1.1.7 counter64 read-only
History Performance count
                   slePmHistoryAccCount 1.3.6.1.4.1.6296.101.94.4.1.1.8 counter32 read-write
Description.
                   slePmHistoryStartTime 1.3.6.1.4.1.6296.101.94.4.1.1.9 timeticks read-only
Description.
           slePmHistoryControl 1.3.6.1.4.1.6296.101.94.4.2
               slePmHistoryControlRequest 1.3.6.1.4.1.6296.101.94.4.2.1 integer read-write
The configuration commands, and user can configure functions via setting this entry as proper value. clearPmHistory : clears all the PM History Table Enumeration: 'clearPmHistory': 1.
               slePmHistoryControlStatus 1.3.6.1.4.1.6296.101.94.4.2.2 slecontrolstatustype read-only
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
               slePmHistoryControlTimer 1.3.6.1.4.1.6296.101.94.4.2.3 gauge32 read-write
the wait-time until setRequest end. In case of short-time command, this value is 0
               slePmHistoryControlTimeStamp 1.3.6.1.4.1.6296.101.94.4.2.4 timeticks read-only
the time stamp of the last command. (don.t care)
               slePmHistoryControlReqResult 1.3.6.1.4.1.6296.101.94.4.2.5 slecontrolrequestresulttype read-only
Result of the last command.
           slePmHistoryNotification 1.3.6.1.4.1.6296.101.94.4.3
               slePmHistoryPmCleared 1.3.6.1.4.1.6296.101.94.4.3.1
Notification for PM History cleared