SLE-DEVICE-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: SLE-DEVICE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sleDevice 1.3.6.1.4.1.6296.101.2
Description.
     sleDeviceBase 1.3.6.1.4.1.6296.101.2.1
         sleDeviceBaseInfo 1.3.6.1.4.1.6296.101.2.1.1
             sleDeviceEthernetPortNum 1.3.6.1.4.1.6296.101.2.1.1.1 integer32 read-only
The number of ethernet port.
             sleDevicePowerNum 1.3.6.1.4.1.6296.101.2.1.1.2 integer32 read-only
The number of power module
             sleDeviceFanModuleNum 1.3.6.1.4.1.6296.101.2.1.1.3 integer32 read-only
The number of FAN module
             sleDeviceTemperatureNum 1.3.6.1.4.1.6296.101.2.1.1.4 integer32 read-only
The number of temperature sensor
             sleDeviceFanStartTemperature 1.3.6.1.4.1.6296.101.2.1.1.5 integer32 read-only
The temperature value which begins to turn fan.
             sleDeviceFanStopTemperature 1.3.6.1.4.1.6296.101.2.1.1.6 integer32 read-only
The temperature value which stops fan.
             sleDeviceJumboFrameStatus 1.3.6.1.4.1.6296.101.2.1.1.7 integer read-only
The global jumbo-frame status. 2011/01/20 V5924CR only support this. Enumeration: 'enable': 1, 'disable': 2.
             sleDeviceEnvironmentMonitoringStatus 1.3.6.1.4.1.6296.101.2.1.1.8 integer read-only
The alarm input mode of environment monitoring for AIU Enumeration: 'normalClose': 2, 'notInstallAIU': 0, 'normalOpen': 1.
         sleDeviceBaseControl 1.3.6.1.4.1.6296.101.2.1.2
             sleDeviceControlRequest 1.3.6.1.4.1.6296.101.2.1.2.1 integer read-write
set an administrative state of FAN module Enumeration: 'setEnvironmentMonitoringStatus': 4, 'setDeviceTemperatureThreshold': 1, 'setDeviceJumboFrameStatus': 2, 'setDeviceLEDTest': 3.
             sleDeviceControlStatus 1.3.6.1.4.1.6296.101.2.1.2.2 slecontrolstatustype read-only
Description.
             sleDeviceControlTimer 1.3.6.1.4.1.6296.101.2.1.2.3 gauge32 read-write
Description.
             sleDeviceControlTimeStamp 1.3.6.1.4.1.6296.101.2.1.2.4 timeticks read-only
Description.
             sleDeviceControlReqResult 1.3.6.1.4.1.6296.101.2.1.2.5 slecontrolrequestresulttype read-only
Description.
             sleDeviceControlFanStartTemperature 1.3.6.1.4.1.6296.101.2.1.2.6 integer32 read-write
Description.
             sleDeviceControlFanStopTemperature 1.3.6.1.4.1.6296.101.2.1.2.7 integer32 read-write
Description.
             sleDeviceControlJumboFrameStatus 1.3.6.1.4.1.6296.101.2.1.2.8 integer read-write
The global jumbo-frame status. 2011/01/20 V5924CR only support this. Enumeration: 'enable': 1, 'disable': 2.
             sleDeviceControlEnvironmentMonitoringStatus 1.3.6.1.4.1.6296.101.2.1.2.9 integer read-only
The alarm input mode of environment monitoring for AIU Enumeration: 'normalClose': 2, 'normalOpen': 1.
         sleDeviceBaseNotification 1.3.6.1.4.1.6296.101.2.1.3
             sleDeviceTemperatureThresholdChanged 1.3.6.1.4.1.6296.101.2.1.3.1
Description.
             sleDeviceJumboFrameChanged 1.3.6.1.4.1.6296.101.2.1.3.2
Description.
             sleDeviceLEDTestChanged 1.3.6.1.4.1.6296.101.2.1.3.3
Description.
             sleDeviceEnvironmentMonitoringStatusChanged 1.3.6.1.4.1.6296.101.2.1.3.4
setEnvironmentMonitoringStatus
     sleEthernetPort 1.3.6.1.4.1.6296.101.2.2
         sleEthernetPortTable 1.3.6.1.4.1.6296.101.2.2.1 no-access
Description.
             sleEthernetPortEntry 1.3.6.1.4.1.6296.101.2.2.1.1 no-access
Description.
                 sleEthernetPortIndex 1.3.6.1.4.1.6296.101.2.2.1.1.1 integer read-only
The port index.
                 sleEthernetPortPhyIndex 1.3.6.1.4.1.6296.101.2.2.1.1.2 integer32 read-only
The physical index of entity mib.
                 sleEthernetPortType 1.3.6.1.4.1.6296.101.2.2.1.1.3 integer read-only
The type of port. It is not planed to made a automatic switchover between optical and electrical interfaces. Enumeration: 'unknown': 0, 'optical': 2, 'electrical': 1.
                 sleEthernetPortAdminStatus 1.3.6.1.4.1.6296.101.2.2.1.1.4 integer read-only
The admin status of port. Enumeration: 'down': 2, 'notAvailable': 3, 'up': 1.
                 sleEthernetPortOperStatus 1.3.6.1.4.1.6296.101.2.2.1.1.5 integer read-only
The oper status of port Enumeration: 'down': 2, 'notAvailable': 3, 'up': 1.
                 sleEthernetPortTransmissionRate 1.3.6.1.4.1.6296.101.2.2.1.1.6 integer32 read-only
The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s
                 sleEthernetPortDuplexMode 1.3.6.1.4.1.6296.101.2.2.1.1.7 integer read-only
The duplex status of port. Enumeration: 'notAvailable': 3, 'full': 1, 'half': 2.
                 sleEthernetPortFlowControl 1.3.6.1.4.1.6296.101.2.2.1.1.8 integer read-only
The flow-control mode of port. Enumeration: 'disabled': 1, 'enabledAsymetrical': 3, 'notAvailable': 5, 'enabledSymetrical': 2, 'enabledBoth': 4.
                 sleEthernetPortNegotiationMode 1.3.6.1.4.1.6296.101.2.2.1.1.9 integer read-only
The Auto Negotiation mode of port. Enumeration: 'notAvailable': 3, 'auto': 1, 'force': 2.
                 sleEthernetPortJumboFrameSize 1.3.6.1.4.1.6296.101.2.2.1.1.10 integer32 read-only
The jumbo frame's size of port. If the value is zero, it means that it is not set up.
                 sleEthernetPortSfpTransceiver 1.3.6.1.4.1.6296.101.2.2.1.1.11 integer read-only
Description. Enumeration: 'opticalShortHaul': 4, 'opticalGpon': 6, 'optical10G': 5, 'unknown': 0, 'electricalCoaxial': 2, 'opticalLongHaul': 3, 'electrical': 1.
                 sleEthernetPortSfpVendorName 1.3.6.1.4.1.6296.101.2.2.1.1.12 octet string read-only
Description.
                 sleEthernetPortSfpVendorPartNumber 1.3.6.1.4.1.6296.101.2.2.1.1.13 octet string read-only
Description.
                 sleEthernetPortSfpVendorRevision 1.3.6.1.4.1.6296.101.2.2.1.1.14 octet string read-only
Description.
                 sleEthernetPortSfpVendorSerialNumber 1.3.6.1.4.1.6296.101.2.2.1.1.15 octet string read-only
Description.
                 sleEthernetPortSfpDateCode 1.3.6.1.4.1.6296.101.2.2.1.1.16 octet string read-only
Description.
                 sleEthernetPortPhysicalRemoteChassis 1.3.6.1.4.1.6296.101.2.2.1.1.17 octet string read-only
Description.
                 sleEthernetPortPhysicalRemoteSlot 1.3.6.1.4.1.6296.101.2.2.1.1.18 integer32 read-only
Description.
                 sleEthernetPortPhysicalRemotePort 1.3.6.1.4.1.6296.101.2.2.1.1.19 integer32 read-only
Description.
                 sleEthernetPortPhysicalLinkDiscoveryMode 1.3.6.1.4.1.6296.101.2.2.1.1.20 integer read-only
Description. Enumeration: 'manual': 2, 'none': 1, 'automatic': 3.
                 sleEthernetPortSfpTransceiverType 1.3.6.1.4.1.6296.101.2.2.1.1.21 integer read-only
The type of SFP transceiver. Enumeration: 'xfp': 3, 'gbit': 2, 'sfp': 1, 'unknown': 255.
                 sleEthernetPortSfpTransceiverDetailType 1.3.6.1.4.1.6296.101.2.2.1.1.22 integer read-write
The detailed-type of SFP transceiver. Enumeration: 'fiberBx10': 7, 'fiber1000Sx': 1, 'fiberOc3SmLr': 11, 'unknown': 255, 'fiber100lLxLx10': 5, 'fiber1000Cx': 3, 'fiber100Fx': 6, 'fiber1000Zx': 12, 'fiberPx': 8, 'fiberOc3SmIr': 10, 'fiberOc3MmSr': 9, 'fiber1000T': 4, 'fiber1000Lx': 2.
                 sleEthernetPortSlotIndex 1.3.6.1.4.1.6296.101.2.2.1.1.23 integer32 read-only
The slot index.
                 sleEthernetPortSlotPortIndex 1.3.6.1.4.1.6296.101.2.2.1.1.24 integer32 read-only
The slot's port index.
                 sleEthernetPortAdminTransmissionRate 1.3.6.1.4.1.6296.101.2.2.1.1.25 integer32 read-only
The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s
                 sleEthernetPortAdminDuplexMode 1.3.6.1.4.1.6296.101.2.2.1.1.26 integer read-only
The duplex status of port. Enumeration: 'notAvailable': 255, 'full': 1, 'half': 2.
                 sleEthernetPortAdminFlowControl 1.3.6.1.4.1.6296.101.2.2.1.1.27 integer read-only
The flow-control mode of port. Enumeration: 'disabled': 1, 'enableSend': 2, 'enableReceive': 3, 'enabledBoth': 4.
                 sleEthernetPortAdminNegotiationMode 1.3.6.1.4.1.6296.101.2.2.1.1.28 integer read-only
The Auto Negotiation mode of port. Enumeration: 'notAvailable': 255, 'auto': 1, 'force': 2.
                 sleEthernetPortAdminReason 1.3.6.1.4.1.6296.101.2.2.1.1.29 integer read-only
The admin down reason of the interface. user : by user-configuration xllcf : by xllcf protocol all : both user and xllcf Enumeration: 'xllcf': 2, 'none': 0, 'all': 3, 'user': 1.
                 sleEthernetPortLinkCheckTimer 1.3.6.1.4.1.6296.101.2.2.1.1.30 integer32 read-only
The Link check internval of the interface
                 sleEthernetPortLinkDebounceTime 1.3.6.1.4.1.6296.101.2.2.1.1.31 integer32 read-only
The link debounce time of the interface
                 sleEthernetPortCpuStatisticsLimitUnicast 1.3.6.1.4.1.6296.101.2.2.1.1.32 integer32 read-only
The CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 )
                 sleEthernetPortCpuStatisticsLimitMulticast 1.3.6.1.4.1.6296.101.2.2.1.1.33 integer32 read-only
et CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 )
                 sleEthernetPortCpuStatisticsLimitBroadcast 1.3.6.1.4.1.6296.101.2.2.1.1.34 integer32 read-only
Set CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 )
                 sleEthernetPortFloodBlockBroadcastState 1.3.6.1.4.1.6296.101.2.2.1.1.35 integer read-only
The Flood Block Broadcast State of the interface Enumeration: 'enable': 1, 'disable': 0.
                 sleEthernetPortFloodBlockDlfState 1.3.6.1.4.1.6296.101.2.2.1.1.36 integer read-only
The Flood Block DLF State of the interface Enumeration: 'enable': 1, 'disable': 0.
         sleEthernetPortControl 1.3.6.1.4.1.6296.101.2.2.2
             sleEthernetPortControlRequest 1.3.6.1.4.1.6296.101.2.2.2.1 integer read-write
Description. Enumeration: 'setEthernetPortFloodBlockStateProfile': 4, 'setEthernetPortLinkProfile': 2, 'setEthernetPortProfile': 1, 'setEhternetPortCpuStatisticsLimitProfile': 3.
             sleEthernetPortControlStatus 1.3.6.1.4.1.6296.101.2.2.2.2 slecontrolstatustype read-only
Description.
             sleEthernetPortControlTimer 1.3.6.1.4.1.6296.101.2.2.2.3 gauge32 read-write
Description.
             sleEthernetPortControlTimeStamp 1.3.6.1.4.1.6296.101.2.2.2.4 timeticks read-only
Description.
             sleEthernetPortControlReqResult 1.3.6.1.4.1.6296.101.2.2.2.5 slecontrolrequestresulttype read-only
Description.
             sleEthernetPortControlIndex 1.3.6.1.4.1.6296.101.2.2.2.6 integer32 read-write
Description.
             sleEthernetPortControlType 1.3.6.1.4.1.6296.101.2.2.2.7 integer read-write
Description. Enumeration: 'unknown': 0, 'optical': 2, 'electrical': 1.
             sleEthernetPortControlAdminStatus 1.3.6.1.4.1.6296.101.2.2.2.8 integer read-write
Description. Enumeration: 'down': 2, 'notAvailable': 3, 'up': 1.
             sleEthernetPortControlTransmissionRate 1.3.6.1.4.1.6296.101.2.2.2.9 integer32 read-write
Description.The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s
             sleEthernetPortControlDuplexMode 1.3.6.1.4.1.6296.101.2.2.2.10 integer read-write
Description. Enumeration: 'notAvailable': 3, 'full': 1, 'half': 2.
             sleEthernetPortControlFlowControl 1.3.6.1.4.1.6296.101.2.2.2.11 integer read-write
Description. Enumeration: 'disabled': 1, 'enabledAsymetrical': 3, 'notAvailable': 5, 'enabledSymetrical': 2, 'enabledBoth': 4.
             sleEthernetPortControlNegotiationMode 1.3.6.1.4.1.6296.101.2.2.2.12 integer read-write
Description. Enumeration: 'notAvailable': 3, 'auto': 1, 'force': 2.
             sleEthernetPortControlJumboFrameSize 1.3.6.1.4.1.6296.101.2.2.2.13 integer32 read-write
Description. If the value is zero, it means erasing the set-up value.
             sleEthernetPortControlPhysicalRemoteChassis 1.3.6.1.4.1.6296.101.2.2.2.14 octet string read-write
Description.
             sleEthernetPortControlPhysicalRemoteSlot 1.3.6.1.4.1.6296.101.2.2.2.15 integer32 read-write
Description.
             sleEthernetPortControlPhysicalRemotePort 1.3.6.1.4.1.6296.101.2.2.2.16 integer32 read-write
Description.
             sleEthernetPortControlPhysicalLinkDiscoveryMode 1.3.6.1.4.1.6296.101.2.2.2.17 integer read-write
Description. Enumeration: 'manual': 2, 'none': 1, 'automatic': 3.
             sleEthernetPortControlLinkCheckTimer 1.3.6.1.4.1.6296.101.2.2.2.18 integer32 read-write
The Link check internval of the interface
             sleEthernetPortControlLinkDebounceTime 1.3.6.1.4.1.6296.101.2.2.2.19 integer32 read-write
The link debounce time of the interface
             sleEthernetPortControlCpuStatisticsLimitUnicast 1.3.6.1.4.1.6296.101.2.2.2.20 integer32 read-write
The CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 )
             sleEthernetPortControlCpuStatisticsLimitMulticast 1.3.6.1.4.1.6296.101.2.2.2.21 integer32 read-write
et CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 )
             sleEthernetPortControlCpuStatisticsLimitBroadcast 1.3.6.1.4.1.6296.101.2.2.2.22 integer32 read-write
Set CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 )
             sleEthernetPortControlFloodBlockBroadcastState 1.3.6.1.4.1.6296.101.2.2.2.23 integer read-write
The Flood Block Broadcast State of the interface Enumeration: 'enable': 1, 'disable': 0.
             sleEthernetPortControlFloodBlockDlfState 1.3.6.1.4.1.6296.101.2.2.2.24 integer read-write
The Flood Block DLF State of the interface Enumeration: 'enable': 1, 'disable': 0.
         sleEthernetPortNotification 1.3.6.1.4.1.6296.101.2.2.3
             sleEthernetPortChanged 1.3.6.1.4.1.6296.101.2.2.3.1
Description.
             sleEthernetPortLinkChanged 1.3.6.1.4.1.6296.101.2.2.3.2
setEthernetPortLinkProfile
             sleEthernetPortCpuStatisticsLimitChanged 1.3.6.1.4.1.6296.101.2.2.3.3
setEhternetPortCpuStatisticsLimitProfile
             sleEthernetPortFloodBlockStateChanged 1.3.6.1.4.1.6296.101.2.2.3.4
setEthernetPortFloodBlockStateProfile
         sleEthernetPortDMITable 1.3.6.1.4.1.6296.101.2.2.4 no-access
Description.
             sleEthernetPortDMIEntry 1.3.6.1.4.1.6296.101.2.2.4.1 no-access
Description.
                 sleEthernetPortDMIIndex 1.3.6.1.4.1.6296.101.2.2.4.1.1 integer read-only
Port Index.
                 sleEthernetPortDMITemper 1.3.6.1.4.1.6296.101.2.2.4.1.2 octet string read-only
Internally measured module temperature.
                 sleEthernetPortDMIVoltage 1.3.6.1.4.1.6296.101.2.2.4.1.3 octet string read-only
Internally measured supply voltage in transceiver.
                 sleEthernetPortDMITxBias 1.3.6.1.4.1.6296.101.2.2.4.1.4 octet string read-only
Internally measured TX Bias Current.
                 sleEthernetPortDMITxPower 1.3.6.1.4.1.6296.101.2.2.4.1.5 octet string read-only
Measured TX output power.
                 sleEthernetPortDMIRxPower 1.3.6.1.4.1.6296.101.2.2.4.1.6 octet string read-only
Measured RX input power.
         sleEthernetSFPTable 1.3.6.1.4.1.6296.101.2.2.5 no-access
Description.
             sleEthernetSFPEntry 1.3.6.1.4.1.6296.101.2.2.5.1 no-access
Description.
                 sleEthernetSfpIndex 1.3.6.1.4.1.6296.101.2.2.5.1.1 integer32 read-only
The SFP index.
                 sleEthernetSfpTransceiver 1.3.6.1.4.1.6296.101.2.2.5.1.2 integer read-only
The type of SFP Enumeration: 'opticalShortHaul': 4, 'opticalGpon': 6, 'optical10G': 5, 'unknown': 0, 'electricalCoaxial': 2, 'opticalLongHaul': 3, 'electrical': 1.
                 sleEthernetSfpVendorName 1.3.6.1.4.1.6296.101.2.2.5.1.3 octet string read-only
The vendor name of SFP
                 sleEthernetSfpVendorPartNumber 1.3.6.1.4.1.6296.101.2.2.5.1.4 octet string read-only
The part number of SFP
                 sleEthernetSfpVendorRevision 1.3.6.1.4.1.6296.101.2.2.5.1.5 octet string read-only
The revision of SFP
                 sleEthernetSfpVendorSerialNumber 1.3.6.1.4.1.6296.101.2.2.5.1.6 octet string read-only
The serial number of SFP
                 sleEthernetSfpDateCode 1.3.6.1.4.1.6296.101.2.2.5.1.7 octet string read-only
The manufacturing date of SFP
                 sleEthernetSfpTransceiverType 1.3.6.1.4.1.6296.101.2.2.5.1.8 integer read-only
The type of SFP transceiver. Enumeration: 'xfp': 3, 'gbic': 2, 'sfp': 1, 'unknown': 255.
                 sleEthernetSfpTransceiverDetailType 1.3.6.1.4.1.6296.101.2.2.5.1.9 integer read-write
The detailed-type of SFP transceiver. Enumeration: 'base10GLRM': 67, 'fiberBx10': 7, 'fiber1000Sx': 1, 'base10GEWorZW': 71, 'fiberOc3SmLr': 11, 'unknown': 255, 'fiber100lLxLx10': 5, 'fiber1000T': 4, 'base10GSW': 68, 'base10GLW': 69, 'fiber1000Cx': 3, 'base10GLR': 65, 'base10GSR': 64, 'fiber100Fx': 6, 'fiber1000Zx': 12, 'fiberPx': 8, 'base10GEW': 70, 'fiberOc3MmSr': 9, 'fiberOc3SmIr': 10, 'fiber1000Lx': 2, 'base10GER': 66.
                 sleEthernetSfpTransceiverCodes 1.3.6.1.4.1.6296.101.2.2.5.1.10 octet string read-only
The transceiver codes. In case of SFP, reference SFP-8472 Rev 11.0 - Table 3.5: Transceiver codes (Address A0h) - Table 3.5a: SONET Compliance Specifiers (A0h) In case of XFP, reference XFP Specification Revision 4.5 (August 31,2005) - Table 40 Transceiver codes
                 sleEthernetSfpSpeed 1.3.6.1.4.1.6296.101.2.2.5.1.11 octet string read-only
The speed of SFP
                 sleEthernetSfpLength 1.3.6.1.4.1.6296.101.2.2.5.1.12 integer32 read-only
The length of SFP
                 sleEthernetSfpWaveLength 1.3.6.1.4.1.6296.101.2.2.5.1.13 integer32 read-only
The wavelength of SFP
                 sleEthernetSfpMultimodeLengthOm1 1.3.6.1.4.1.6296.101.2.2.5.1.14 integer32 read-only
The Flame rating is 62.5um(OM1). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
                 sleEthernetSfpMultimodeLengthOm2 1.3.6.1.4.1.6296.101.2.2.5.1.15 integer32 read-only
The Flame rating is 50um(OM2). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
                 sleEthernetSfpMultimodeLengthOm3 1.3.6.1.4.1.6296.101.2.2.5.1.16 integer32 read-only
The Flame rating is 50um(OM3). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
                 sleEthernetSfpTransceiverDetailTypeStr 1.3.6.1.4.1.6296.101.2.2.5.1.17 octet string read-only
Description.
                 sleEthernetSfpTransceiverLengthStr 1.3.6.1.4.1.6296.101.2.2.5.1.18 octet string read-only
Description.
                 sleEthernetSfpWaveLengthStr 1.3.6.1.4.1.6296.101.2.2.5.1.19 octet string read-only
Description.
                 sleEthernetSfpConnectorType 1.3.6.1.4.1.6296.101.2.2.5.1.20 octet string read-only
Description.
                 sleEthernetSfpDdmState 1.3.6.1.4.1.6296.101.2.2.5.1.21 integer read-only
The DDM state Enumeration: 'enable': 1, 'disable': 0.
                 sleEthernetSfpNegoState 1.3.6.1.4.1.6296.101.2.2.5.1.22 integer read-only
The Nego state Enumeration: 'on': 1, 'off': 0.
         sleEthernetSFPControl 1.3.6.1.4.1.6296.101.2.2.6
             sleEthernetSFPControlRequest 1.3.6.1.4.1.6296.101.2.2.6.1 integer read-write
Description. Enumeration: 'setSFPRemoteReset': 1, 'setSFPDdmState': 2.
             sleEthernetSFPControlStatus 1.3.6.1.4.1.6296.101.2.2.6.2 slecontrolstatustype read-only
Description.
             sleEthernetSFPControlTimer 1.3.6.1.4.1.6296.101.2.2.6.3 gauge32 read-write
Description.
             sleEthernetSFPControlTimeStamp 1.3.6.1.4.1.6296.101.2.2.6.4 timeticks read-only
Description.
             sleEthernetSFPControlReqResult 1.3.6.1.4.1.6296.101.2.2.6.5 slecontrolrequestresulttype read-only
Description.
             sleEthernetSFPControlIndex 1.3.6.1.4.1.6296.101.2.2.6.6 integer32 read-write
Description.
             sleEthernetSfpControlDdmState 1.3.6.1.4.1.6296.101.2.2.6.7 integer read-write
Description. Enumeration: 'enable': 1, 'disable': 0.
         sleEthernetSFPNotification 1.3.6.1.4.1.6296.101.2.2.7
             sleEthernetSFPRemoteReset 1.3.6.1.4.1.6296.101.2.2.7.1
setSFPRemoteReset
             sleEthernetSFPDdmState 1.3.6.1.4.1.6296.101.2.2.7.2
setSFPDdmState
         sleEthernetSFPThresholdTable 1.3.6.1.4.1.6296.101.2.2.8 no-access
Description.
             sleEthernetSFPThresholdEntry 1.3.6.1.4.1.6296.101.2.2.8.1 no-access
Description.
                 sleEthernetSFPThresholdIfIndex 1.3.6.1.4.1.6296.101.2.2.8.1.1 integer32 read-only
The index of the interface
                 sleEthernetSFPThresholdType 1.3.6.1.4.1.6296.101.2.2.8.1.2 integer read-only
The Type of Threshold Enumeration: 'temperAlarm': 2, 'rxpowerAlarm': 10, 'rxpowerWarning': 9, 'txpowerWarning': 7, 'temperWarning': 1, 'voltageWarning': 3, 'txbiasAlarm': 6, 'txpowerAlarm': 8, 'voltageAlarm': 4, 'txbiasWarning': 5.
                 sleEthernetSFPThresholdSfpLow 1.3.6.1.4.1.6296.101.2.2.8.1.3 octet string read-only
The Threshold Low Value of Sfp
                 sleEthernetSFPThresholdSfpHigh 1.3.6.1.4.1.6296.101.2.2.8.1.4 octet string read-only
The Threshold High Value of Sfp
                 sleEthernetSFPThresholdSystemLow 1.3.6.1.4.1.6296.101.2.2.8.1.5 octet string read-only
The Threshold Low Value of System
                 sleEthernetSFPThresholdSystemHigh 1.3.6.1.4.1.6296.101.2.2.8.1.6 octet string read-only
The Threshold High Value of System
         sleEthernetSFPThresholdControl 1.3.6.1.4.1.6296.101.2.2.9
             sleEthernetSFPThresholdControlRequest 1.3.6.1.4.1.6296.101.2.2.9.1 integer read-write
Description. Enumeration: 'delThresholdModule': 3, 'setSystemThresholdModule': 2, 'setSfpThresholdModule': 1.
             sleEthernetSFPThresholdControlStatus 1.3.6.1.4.1.6296.101.2.2.9.2 slecontrolstatustype read-only
Description.
             sleEthernetSFPThresholdControlTimer 1.3.6.1.4.1.6296.101.2.2.9.3 gauge32 read-write
Description.
             sleEthernetSFPThresholdControlTimeStamp 1.3.6.1.4.1.6296.101.2.2.9.4 timeticks read-only
Description.
             sleEthernetSFPThresholdControlReqResult 1.3.6.1.4.1.6296.101.2.2.9.5 slecontrolrequestresulttype read-only
Description.
             sleEthernetSFPThresholdControlIfIndex 1.3.6.1.4.1.6296.101.2.2.9.6 integer32 read-write
The index of the interface
             sleEthernetSFPThresholdControlType 1.3.6.1.4.1.6296.101.2.2.9.7 integer read-write
The Type of Threshold Enumeration: 'temperAlarm': 2, 'rxpowerAlarm': 10, 'rxpowerWarning': 9, 'txpowerWarning': 7, 'temperWarning': 1, 'voltageWarning': 3, 'txbiasAlarm': 6, 'txpowerAlarm': 8, 'voltageAlarm': 4, 'txbiasWarning': 5.
             sleEthernetSFPThresholdControlSfpLow 1.3.6.1.4.1.6296.101.2.2.9.8 octet string read-write
The Threshold Low Value of Sfp
             sleEthernetSFPThresholdControlSfpHigh 1.3.6.1.4.1.6296.101.2.2.9.9 octet string read-write
The Threshold High Value of Sfp
             sleEthernetSFPThresholdControlSystemLow 1.3.6.1.4.1.6296.101.2.2.9.10 octet string read-write
The Threshold Low Value of System
             sleEthernetSFPThresholdControlSystemHigh 1.3.6.1.4.1.6296.101.2.2.9.11 octet string read-write
The Threshold High Value of System
         sleEthernetSFPThresholdNotification 1.3.6.1.4.1.6296.101.2.2.10
               sleEthernetSFPThresholdSfpChanged 1.3.6.1.4.1.6296.101.2.2.10.1
setSfpThresholdModule
               sleEthernetSFPThresholdSystemChanged 1.3.6.1.4.1.6296.101.2.2.10.2
setSystemThresholdModule
               sleEthernetSFPThresholdDestroyed 1.3.6.1.4.1.6296.101.2.2.10.3
delThresholdModule
     slePower 1.3.6.1.4.1.6296.101.2.3
         slePowerTable 1.3.6.1.4.1.6296.101.2.3.1 no-access
Description.
             slePowerEntry 1.3.6.1.4.1.6296.101.2.3.1.1 no-access
Description.
                 slePowerIndex 1.3.6.1.4.1.6296.101.2.3.1.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                 slePowerPhyIndex 1.3.6.1.4.1.6296.101.2.3.1.1.2 integer32 read-only
entPhysicalIndex of Power Modules (0: Internal, -1: uninstalled)
                 slePowerState 1.3.6.1.4.1.6296.101.2.3.1.1.3 integer read-only
Power status information. Enumeration: 'failure': 0, 'ok': 1.
                 slePowerType 1.3.6.1.4.1.6296.101.2.3.1.1.4 integer read-only
Power type information. Enumeration: 'unknown': 3, 'ac': 1, 'dc': 2, 'ps': 4.
                 slePowerPSUType 1.3.6.1.4.1.6296.101.2.3.1.1.5 integer read-only
The type of Power Supply Unit.(DC) Enumeration: 'psuA': 1, 'psuS': 2, 'unknown': 255.
     sleFanModule 1.3.6.1.4.1.6296.101.2.4
         sleFanModuleTable 1.3.6.1.4.1.6296.101.2.4.1 no-access
Description.
             sleFanModuleEntry 1.3.6.1.4.1.6296.101.2.4.1.1 no-access
Description.
                 sleFanModuleIndex 1.3.6.1.4.1.6296.101.2.4.1.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
                 sleFanModulePhyIndex 1.3.6.1.4.1.6296.101.2.4.1.1.2 integer32 read-only
entPhysicalIndex of FAN Modules. (0: Internal, -1: uninstalled)
                 sleFanModuleUnitNum 1.3.6.1.4.1.6296.101.2.4.1.1.3 integer32 read-only
The number of unit in FAN module
                 sleFanModuleAdminState 1.3.6.1.4.1.6296.101.2.4.1.1.4 integer read-only
An administrative state of FAN module Enumeration: 'on': 1, 'off': 0, 'auto': 2.
                 sleFanModuleSpeedThreshold 1.3.6.1.4.1.6296.101.2.4.1.1.5 integer32 read-only
Fan-speed threshold
         sleFanModuleControl 1.3.6.1.4.1.6296.101.2.4.2
             sleFanModuleControlRequest 1.3.6.1.4.1.6296.101.2.4.2.1 integer read-write
set an administrative state of FAN module Enumeration: 'setFanAdminState': 1, 'setFanSpeedThreshold': 2.
             sleFanModuleControlStatus 1.3.6.1.4.1.6296.101.2.4.2.2 slecontrolstatustype read-only
Description.
             sleFanModuleControlTimer 1.3.6.1.4.1.6296.101.2.4.2.3 gauge32 read-write
Description.
             sleFanModuleControlTimeStamp 1.3.6.1.4.1.6296.101.2.4.2.4 timeticks read-only
Description.
             sleFanModuleControlReqResult 1.3.6.1.4.1.6296.101.2.4.2.5 slecontrolrequestresulttype read-only
Description.
             sleFanModuleControlIndex 1.3.6.1.4.1.6296.101.2.4.2.6 integer32 read-write
Description.
             sleFanModuleControlAdminState 1.3.6.1.4.1.6296.101.2.4.2.7 integer read-write
An administrative state of FAN module Enumeration: 'on': 1, 'off': 0, 'auto': 2.
             sleFanModuleControlSpeedThreshold 1.3.6.1.4.1.6296.101.2.4.2.8 integer32 read-write
Fan-speed threshold
         sleFanModuleNotification 1.3.6.1.4.1.6296.101.2.4.3
             sleFanAdminStateChanged 1.3.6.1.4.1.6296.101.2.4.3.1
Description.
             sleFanSpeedThresholdChanged 1.3.6.1.4.1.6296.101.2.4.3.2
Description.
     sleFanUnit 1.3.6.1.4.1.6296.101.2.5
         sleFanUnitTable 1.3.6.1.4.1.6296.101.2.5.1 no-access
Description.
             sleFanUnitEntry 1.3.6.1.4.1.6296.101.2.5.1.1 no-access
Description.
                 sleFanUnitIndex 1.3.6.1.4.1.6296.101.2.5.1.1.1 integer read-only
A unique number in FAN module
                 sleFanUnitOperState 1.3.6.1.4.1.6296.101.2.5.1.1.2 integer read-only
An operational state of FAN unit Enumeration: 'failure': 0, 'stop': 2, 'ok': 1.
                 sleFanUnitSpeed 1.3.6.1.4.1.6296.101.2.5.1.1.3 integer32 read-only
Speed of FAN unit
     sleTemperature 1.3.6.1.4.1.6296.101.2.6
         sleTemperatureTable 1.3.6.1.4.1.6296.101.2.6.1 no-access
Description.
             sleTemperatureEntry 1.3.6.1.4.1.6296.101.2.6.1.1 no-access
Description.
                 sleTemperatureIndex 1.3.6.1.4.1.6296.101.2.6.1.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
                 sleTemperatureState 1.3.6.1.4.1.6296.101.2.6.1.1.2 integer read-only
Temperature status information Enumeration: 'failure': 0, 'ok': 1, 'others': 2.
                 sleTemperatureValue 1.3.6.1.4.1.6296.101.2.6.1.1.3 integer32 read-only
The value of temperature sensor. (unit: C)
                 sleTemperatureHighThreshold 1.3.6.1.4.1.6296.101.2.6.1.1.4 integer32 read-only
The High threshold of temperature.
                 sleTemperatureLowThreshold 1.3.6.1.4.1.6296.101.2.6.1.1.5 integer32 read-only
The Low threshold of temperature.
                 sleTemperatureWarnHighThreshold 1.3.6.1.4.1.6296.101.2.6.1.1.6 integer32 read-only
The High threshold of temperature.
                 sleTemperatureWarnLowThreshold 1.3.6.1.4.1.6296.101.2.6.1.1.7 integer32 read-only
The Low threshold of temperature.
                 sleTemperatureWarnDuration 1.3.6.1.4.1.6296.101.2.6.1.1.8 integer32 read-only
Duration-time units by the 5 sec. 0: Clear threshold.
                 sleTemperatureAlarmHighThreshold 1.3.6.1.4.1.6296.101.2.6.1.1.9 integer32 read-only
The High threshold of temperature.
                 sleTemperatureAlarmLowThreshold 1.3.6.1.4.1.6296.101.2.6.1.1.10 integer32 read-only
The Low threshold of temperature.
                 sleTemperatureAlarmDuration 1.3.6.1.4.1.6296.101.2.6.1.1.11 integer32 read-only
Duration-time units by the 5 sec. 0: Clear threshold.
         sleTemperatureControl 1.3.6.1.4.1.6296.101.2.6.2
             sleTemperatureControlRequest 1.3.6.1.4.1.6296.101.2.6.2.1 integer read-write
set an administrative state of FAN module Enumeration: 'setTempThreshold': 1, 'setTempAlarmThreshold': 2, 'setTempWarnThreshold': 3.
             sleTemperatureControlStatus 1.3.6.1.4.1.6296.101.2.6.2.2 slecontrolstatustype read-only
Description.
             sleTemperatureControlTimer 1.3.6.1.4.1.6296.101.2.6.2.3 gauge32 read-write
Description.
             sleTemperatureControlTimeStamp 1.3.6.1.4.1.6296.101.2.6.2.4 timeticks read-only
Description.
             sleTemperatureControlReqResult 1.3.6.1.4.1.6296.101.2.6.2.5 slecontrolrequestresulttype read-only
Description.
             sleTemperatureControlIndex 1.3.6.1.4.1.6296.101.2.6.2.6 integer32 read-write
The Temperature index
             sleTemperatureControlHighThreshold 1.3.6.1.4.1.6296.101.2.6.2.7 integer32 read-write
The High threshold of temperature.
             sleTemperatureControlLowThreshold 1.3.6.1.4.1.6296.101.2.6.2.8 integer32 read-write
The Low threshold of temperature.
             sleTemperatureControlDuration 1.3.6.1.4.1.6296.101.2.6.2.9 integer32 read-write
Duration-time units by the 5 sec. 0: Clear threshold.
         sleTemperatureNotification 1.3.6.1.4.1.6296.101.2.6.3
             sleTemperatureThresholdChanged 1.3.6.1.4.1.6296.101.2.6.3.1
Description.
     sleBattery 1.3.6.1.4.1.6296.101.2.7
         sleBatteryTable 1.3.6.1.4.1.6296.101.2.7.1 no-access
Description.
             sleBatteryEntry 1.3.6.1.4.1.6296.101.2.7.1.1 no-access
Description.
                 sleBatteryIndex 1.3.6.1.4.1.6296.101.2.7.1.1.1 integer read-only
The index of battery charger.
                 sleOperationPowerType 1.3.6.1.4.1.6296.101.2.7.1.1.2 integer read-only
Power Type. Enumeration: 'ac': 0, 'rb': 1.
                 sleOperationPowerInfo 1.3.6.1.4.1.6296.101.2.7.1.1.3 octet string read-only
Operation Power Info.
                 slePSUACPowerState 1.3.6.1.4.1.6296.101.2.7.1.1.4 integer read-only
Power State. Enumeration: 'fault': 1, 'ok': 0.
                 slePSUTemperture 1.3.6.1.4.1.6296.101.2.7.1.1.5 integer32 read-only
Temperture.
                 slePSUTempThreshold 1.3.6.1.4.1.6296.101.2.7.1.1.6 integer32 read-only
Temperture Threshold.
                 slePSUOutVoltage 1.3.6.1.4.1.6296.101.2.7.1.1.7 octet string read-only
Voltage.
                 slePSUOverTemp 1.3.6.1.4.1.6296.101.2.7.1.1.8 integer read-only
Description. Enumeration: 'over': 1, 'normal': 0.
                 slePSUFirmwareVer 1.3.6.1.4.1.6296.101.2.7.1.1.9 integer32 read-only
The firmware version of battery charger for communication to system.
                 sleRBUEquipState 1.3.6.1.4.1.6296.101.2.7.1.1.10 integer read-only
Equipment State. Enumeration: 'empty': 1, 'equipped': 0.
                 sleRBUModeStaus 1.3.6.1.4.1.6296.101.2.7.1.1.11 octet string read-only
Description.
                 sleRBUTemperature1 1.3.6.1.4.1.6296.101.2.7.1.1.12 integer32 read-only
Description.
                 sleRBUTemperature2 1.3.6.1.4.1.6296.101.2.7.1.1.13 integer32 read-only
.
                 sleRBUTempLowThreshold 1.3.6.1.4.1.6296.101.2.7.1.1.14 integer32 read-only
RBU Low Temperature Threshold.
                 sleRBUOutVoltage 1.3.6.1.4.1.6296.101.2.7.1.1.15 octet string read-only
RBU Out Voltage.
                 sleRBUChargeCurrent 1.3.6.1.4.1.6296.101.2.7.1.1.16 integer32 read-only
Current Charge.
                 sleRBURemainCapacity 1.3.6.1.4.1.6296.101.2.7.1.1.17 integer32 read-only
Remain Capacity.
                 sleRBUOverTemp 1.3.6.1.4.1.6296.101.2.7.1.1.18 integer read-only
The state of Temperature over. Enumeration: 'over': 1, 'normal': 0, 'under': 2.
                 sleBatteryLow 1.3.6.1.4.1.6296.101.2.7.1.1.19 integer read-only
Battery state. Enumeration: 'notAvailable': 2, 'low': 1, 'normal': 0.
                 sleRBUTempHighThreshold 1.3.6.1.4.1.6296.101.2.7.1.1.20 integer32 read-only
RBU High Temperature Threshold.
                 sleRBUBTStatus 1.3.6.1.4.1.6296.101.2.7.1.1.21 integer read-only
Description. Enumeration: 'enable': 1, 'disable': 2.
                 sleRBUBTThreshold 1.3.6.1.4.1.6296.101.2.7.1.1.22 integer32 read-only
Description.
                 sleRBURechargeVoltage 1.3.6.1.4.1.6296.101.2.7.1.1.23 integer32 read-only
Description.
                 sleBatteryCellStatus 1.3.6.1.4.1.6296.101.2.7.1.1.24 integer read-only
Description. Enumeration: 'failure': 2, 'ok': 1.
                 sleBPSUACHardwareVer 1.3.6.1.4.1.6296.101.2.7.1.1.25 integer32 read-only
Description.
         sleBatteryControl 1.3.6.1.4.1.6296.101.2.7.2
             sleBatteryControlRequest 1.3.6.1.4.1.6296.101.2.7.2.1 integer read-write
Description. Enumeration: 'setBatteryChargingStart': 2, 'setBatteryBootingTimeStatus': 4, 'setPsuAcTemperature': 7, 'setBatteryTemperature': 8, 'setBatteryBootingTime': 5, 'setBatteryForceChargeNonStop': 3, 'setBatteryRechargeVoltage': 6, 'setBatteryForceCharge': 1.
             sleBatteryControlStatus 1.3.6.1.4.1.6296.101.2.7.2.2 integer32 read-write
Description.
             sleBatteryControlTimer 1.3.6.1.4.1.6296.101.2.7.2.3 integer32 read-write
Description.
             sleBatteryControlTimeStamp 1.3.6.1.4.1.6296.101.2.7.2.4 integer32 read-write
Description.
             sleBatteryControlReqResult 1.3.6.1.4.1.6296.101.2.7.2.5 integer32 read-write
Description.
             sleBatteryControlRBUBTStatus 1.3.6.1.4.1.6296.101.2.7.2.6 integer read-write
Description. Enumeration: 'enable': 1, 'disable': 2.
             sleBatteryControlRBUBTThreshold 1.3.6.1.4.1.6296.101.2.7.2.7 integer32 read-write
Description.
             sleBatteryControlRBURechargeVoltage 1.3.6.1.4.1.6296.101.2.7.2.8 integer32 read-write
Description.
             sleBatteryControlTemperThresh1 1.3.6.1.4.1.6296.101.2.7.2.9 integer32 read-write
Description.
             sleBatteryControlTemperThresh2 1.3.6.1.4.1.6296.101.2.7.2.10 integer32 read-write
Description.
         sleBatteryNotification 1.3.6.1.4.1.6296.101.2.7.3
             sleBatteryForceChargeChanged 1.3.6.1.4.1.6296.101.2.7.3.1
Description.
             sleBatteryChargingStartChanged 1.3.6.1.4.1.6296.101.2.7.3.2
Description.
             sleBatteryForceChargeNonStopChanged 1.3.6.1.4.1.6296.101.2.7.3.3
Description.
             sleBatteryRBUBTStatusChanged 1.3.6.1.4.1.6296.101.2.7.3.4
Description.
             sleBatteryRBUBTThresholdChanged 1.3.6.1.4.1.6296.101.2.7.3.5
Description.
             sleBatteryRBURechargeVoltageChanged 1.3.6.1.4.1.6296.101.2.7.3.6
Description.
             sleBatteryPsuAcTemperThreshChanged 1.3.6.1.4.1.6296.101.2.7.3.7
Description.
             sleBatteryRBUTemperThreshChanged 1.3.6.1.4.1.6296.101.2.7.3.8
Description.
         sleBatteryBackupTable 1.3.6.1.4.1.6296.101.2.7.4 no-access
Description.
             sleBatteryBackupEntry 1.3.6.1.4.1.6296.101.2.7.4.1 no-access
Description.
                 sleBatteryBackupFile 1.3.6.1.4.1.6296.101.2.7.4.1.1 octet string read-only
Description.
         sleBatteryBackupControl 1.3.6.1.4.1.6296.101.2.7.5
             sleBatteryBackupControlRequest 1.3.6.1.4.1.6296.101.2.7.5.1 integer read-write
Description. Enumeration: 'clearBatteryBackupTable': 3, 'setBatteryUpgrade': 2, 'setBatteryBackupProfile': 1.
             sleBatteryBackupControlStatus 1.3.6.1.4.1.6296.101.2.7.5.2 slecontrolstatustype read-only
Description.
             sleBatteryBackupControlTimer 1.3.6.1.4.1.6296.101.2.7.5.3 gauge32 read-write
Description.
             sleBatteryBackupControlTimeStamp 1.3.6.1.4.1.6296.101.2.7.5.4 timeticks read-only
Description.
             sleBatteryBackupControlReqResult 1.3.6.1.4.1.6296.101.2.7.5.5 slecontrolrequestresulttype read-only
Description.
             sleBatteryBackupControlServerIP 1.3.6.1.4.1.6296.101.2.7.5.6 ipaddress read-write
Description.
             sleBatteryBackupControlUserID 1.3.6.1.4.1.6296.101.2.7.5.7 octet string read-write
Description.
             sleBatteryBackupControlPassword 1.3.6.1.4.1.6296.101.2.7.5.8 octet string read-write
Description.
             sleBatteryBackupControlFlag 1.3.6.1.4.1.6296.101.2.7.5.9 integer read-write
Description. Enumeration: 'download': 1, 'upload': 2.
             sleBatteryBackupControlLocalFile 1.3.6.1.4.1.6296.101.2.7.5.10 octet string read-write
Description.
             sleBatteryBackupControlRemoteFile 1.3.6.1.4.1.6296.101.2.7.5.11 octet string read-write
Description.
         sleBatterBackupNotification 1.3.6.1.4.1.6296.101.2.7.6
             sleBatteryBackupProfileChanged 1.3.6.1.4.1.6296.101.2.7.6.1
Description.
             sleBatteryBackupUpgraded 1.3.6.1.4.1.6296.101.2.7.6.2
Description.
             sleBatteryBackupTableCleared 1.3.6.1.4.1.6296.101.2.7.6.3
Description.
     sleDoor 1.3.6.1.4.1.6296.101.2.8
         sleDoorInfo 1.3.6.1.4.1.6296.101.2.8.1
             sleDoorStatus 1.3.6.1.4.1.6296.101.2.8.1.1 integer read-only
Description. Enumeration: 'close': 0, 'open': 1.
     sleCpu 1.3.6.1.4.1.6296.101.2.9
         sleCpuInfo 1.3.6.1.4.1.6296.101.2.9.1
             sleCpuProcessor 1.3.6.1.4.1.6296.101.2.9.1.1 octet string read-only
Description.
             sleCpuModel 1.3.6.1.4.1.6296.101.2.9.1.2 octet string read-only
Description.
             sleCpuRevision 1.3.6.1.4.1.6296.101.2.9.1.3 octet string read-only
Description.
             sleCpuBogomips 1.3.6.1.4.1.6296.101.2.9.1.4 octet string read-only
Description.
             sleCpuManufacturer 1.3.6.1.4.1.6296.101.2.9.1.5 octet string read-only
Description.
             sleCpuClock 1.3.6.1.4.1.6296.101.2.9.1.6 integer32 read-only
Description.
             sleCpuBusClock 1.3.6.1.4.1.6296.101.2.9.1.7 integer32 read-only
Description.
     sleClockModule 1.3.6.1.4.1.6296.101.2.10
           sleClockModuleTable 1.3.6.1.4.1.6296.101.2.10.1 no-access
Description.
               sleClockModuleEntry 1.3.6.1.4.1.6296.101.2.10.1.1 no-access
Description.
                   sleClockModuleIndex 1.3.6.1.4.1.6296.101.2.10.1.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
                   sleClockModuleBoardId 1.3.6.1.4.1.6296.101.2.10.1.1.2 integer read-only
Indication of the board identifier. Enumeration: 'sfuA': 1, 'sfuB': 2.
                   sleClockModuleInstallStatus 1.3.6.1.4.1.6296.101.2.10.1.1.3 integer read-only
The install status of clock module. Enumeration: 'removed': 0, 'installed': 1.
                   sleClockModuleInitStatus 1.3.6.1.4.1.6296.101.2.10.1.1.4 integer read-only
The initialization status of clock module. Enumeration: 'failure': 0, 'ok': 1.
                   sleClockModuleOPMode 1.3.6.1.4.1.6296.101.2.10.1.1.5 integer read-write
The CM operating mode Enumeration: 'locked': 3, 'lostphase': 6, 'unknown': 255, 'holdover': 2, 'prelocked': 5, 'freerun': 1, 'prelocked2': 4.
           sleClockInfo 1.3.6.1.4.1.6296.101.2.10.2
               sleClockInfoInSrcType 1.3.6.1.4.1.6296.101.2.10.2.1 integer no-access
The clock input source type. Enumeration: 'unknown': 255, 'ntt2': 2, 'e1': 3, 'ntt': 1, 't1': 4.
               sleClockInfoInSrcStatus 1.3.6.1.4.1.6296.101.2.10.2.2 integer no-access
The input source is Valid or Invalid. Enumeration: 'true': 1, 'false': 2.
               sleClockInfoInSrcAISStatus 1.3.6.1.4.1.6296.101.2.10.2.3 integer no-access
The AIS is detected or not detected. Enumeration: 'true': 1, 'false': 2.
               sleClockInfoInSrcLoSStatus 1.3.6.1.4.1.6296.101.2.10.2.4 integer no-access
The LoS is detected or not detected Enumeration: 'true': 1, 'false': 2.
               sleClockInfoInSrcLDSCStatus 1.3.6.1.4.1.6296.101.2.10.2.5 integer no-access
The Line Driver Short Circuit is detected or not detected Enumeration: 'true': 1, 'false': 2.
               sleClockInfoInSrcNtrClockType 1.3.6.1.4.1.6296.101.2.10.2.6 bits no-access
The ntr clock is changed. Bits: 'bit64Khz': 0, 'bit04Khz': 2, 'bit8Khz': 1.
     sleSlot 1.3.6.1.4.1.6296.101.2.11
           sleSlotSystemInfo 1.3.6.1.4.1.6296.101.2.11.1
               sleSlotSystemInfoTable 1.3.6.1.4.1.6296.101.2.11.1.1 no-access
Description.
                   sleSlotSystemInfoEntry 1.3.6.1.4.1.6296.101.2.11.1.1.1 no-access
Description.
                       sleSlotSystemIndex 1.3.6.1.4.1.6296.101.2.11.1.1.1.1 integer32 read-only
The system slot index.
                       sleSlotSystemUptime 1.3.6.1.4.1.6296.101.2.11.1.1.1.2 timeticks read-only
The time since the network management portion of the system was last re-initialized.
                       sleSlotSystemModelName 1.3.6.1.4.1.6296.101.2.11.1.1.1.3 octet string read-only
The model name.
                       sleSlotSystemSerialNumber 1.3.6.1.4.1.6296.101.2.11.1.1.1.4 octet string read-only
The serial number
                       sleSlotSystemHWVersion 1.3.6.1.4.1.6296.101.2.11.1.1.1.5 octet string read-only
The H/W version.
                       sleSlotSystemBLVersion 1.3.6.1.4.1.6296.101.2.11.1.1.1.6 octet string read-only
The boot loader's S/W version.
                       sleSlotSystemSWCompatibility 1.3.6.1.4.1.6296.101.2.11.1.1.1.7 octet string read-only
The system compatibility.
                       sleSlotSystemOSVersion 1.3.6.1.4.1.6296.101.2.11.1.1.1.8 octet string read-only
The version information of current os.
                       sleSlotSystemMacAddress 1.3.6.1.4.1.6296.101.2.11.1.1.1.9 octet string read-only
The system's MAC address.
                       sleSlotSystemCPULoadAll 1.3.6.1.4.1.6296.101.2.11.1.1.1.10 octet string read-only
The CPU all load for 5/60/600 second. (unit: 0.01%)
                       sleSlotSystemCPULoadInterrupt 1.3.6.1.4.1.6296.101.2.11.1.1.1.11 octet string read-only
The CPU interrupt load for 5/60/600 second. (unit: 0.01%)
                       sleSlotSystemMemoryTotal 1.3.6.1.4.1.6296.101.2.11.1.1.1.12 gauge32 read-only
The total memory size (unit: kb)
                       sleSlotSystemMemoryFree 1.3.6.1.4.1.6296.101.2.11.1.1.1.13 gauge32 read-only
The freed memory size (unit: kb)
                       sleSlotSystemMemoryShared 1.3.6.1.4.1.6296.101.2.11.1.1.1.14 gauge32 read-only
The shared memory size (unit: kb)
                       sleSlotSystemMemoryBuffers 1.3.6.1.4.1.6296.101.2.11.1.1.1.15 gauge32 read-only
The buffer size (unit: kb)
                       sleSlotSystemMemoryCached 1.3.6.1.4.1.6296.101.2.11.1.1.1.16 gauge32 read-only
The cached memory size (unit: kb)
                       sleSlotSystemMemorySwapTotal 1.3.6.1.4.1.6296.101.2.11.1.1.1.17 gauge32 read-only
The total swap memory size (unit: kb)
                       sleSlotSystemMemorySwapFree 1.3.6.1.4.1.6296.101.2.11.1.1.1.18 gauge32 read-only
The freed swap memory size (unit: kb)
                       sleSlotSystemBootReason 1.3.6.1.4.1.6296.101.2.11.1.1.1.19 integer read-only
The system slot boot reason. Enumeration: 'swRebootBySwitchover': 13, 'swReboot': 10, 'watchdogByLocal': 21, 'powerBootByLocal': 2, 'swWatchdog': 30, 'hwRebootBySwitchover': 6, 'swRebootByLocal': 11, 'swWatchdogByMemoryLow': 32, 'powerBoot': 1, 'swRebootBySFU': 12, 'hwRebootByMate': 5, 'error': 255, 'swRebootByPanic': 14, 'watchdog': 20, 'hardWdogByLocal': 4, 'hwResetBySW': 3, 'swWatchdogByCpuOver': 31.
                       sleSlotSystemBootTime 1.3.6.1.4.1.6296.101.2.11.1.1.1.20 gauge32 read-only
The system slot boot time. The time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds.
                       sleSlotSystemVoltage 1.3.6.1.4.1.6296.101.2.11.1.1.1.21 gauge32 read-only
The system slot voltage.
                       sleSlotSystemPowerLevelStatus 1.3.6.1.4.1.6296.101.2.11.1.1.1.22 integer read-only
PCB Power level status. Enumeration: 'bad': 2, 'good': 1.
                       sleSlotSystemInfoLEDStatus 1.3.6.1.4.1.6296.101.2.11.1.1.1.23 bits read-only
The LED status of each slot. Bits: 'major': 3, 'run': 1, 'critical': 2, 'error': 5, 'pwr': 0, 'minor': 4.
                       sleSlotSystemInfoPackageVersion 1.3.6.1.4.1.6296.101.2.11.1.1.1.24 octet string read-only
The applied package revision.
                       sleSlotSystemInfoManufacturer 1.3.6.1.4.1.6296.101.2.11.1.1.1.25 octet string read-only
Ths manufacturer name and country.
                       sleSlotSystemInfoManufactureDate 1.3.6.1.4.1.6296.101.2.11.1.1.1.26 octet string read-only
Ths manufacture date.
                       sleSlotSystemCPULoadHighThreshold 1.3.6.1.4.1.6296.101.2.11.1.1.1.27 integer32 read-only
The high threshold of CPU load (70:default)
                       sleSlotSystemCPULoadHighThresholdTimer 1.3.6.1.4.1.6296.101.2.11.1.1.1.28 integer read-only
The high threshold timer of CPU load (sec) (60:default) Enumeration: 'timerInverval5': 1, 'timerInverval60': 2, 'timerInverval600': 3.
                       sleSlotSystemCPULoadLowThreshold 1.3.6.1.4.1.6296.101.2.11.1.1.1.29 integer32 read-only
The low threshold of CPU load (30:default)
                       sleSlotSystemCPULoadLowThresholdTimer 1.3.6.1.4.1.6296.101.2.11.1.1.1.30 integer read-only
The low threshold timer of CPU load (sec) (60:default) Enumeration: 'timerInverval5': 1, 'timerInverval60': 2, 'timerInverval600': 3.
                       sleSlotSystemCPULoadCurrent 1.3.6.1.4.1.6296.101.2.11.1.1.1.31 integer32 read-only
The CPU load currnet value (only used for trap)
                       sleSlotSystemCPUOverallStatus 1.3.6.1.4.1.6296.101.2.11.1.1.1.32 integer read-only
The CPU Overall status for SFU & IU Enumeration: 'bad': 2, 'good': 1.
                       sleSlotSystemTemperOverallStatus 1.3.6.1.4.1.6296.101.2.11.1.1.1.33 integer read-only
The Temperature Overall status for SFU & IU Enumeration: 'bad': 2, 'good': 1.
               sleSlotSystemControl 1.3.6.1.4.1.6296.101.2.11.1.2
                   sleSlotSystemControlRequest 1.3.6.1.4.1.6296.101.2.11.1.2.1 integer read-write
The request of a user command Enumeration: 'setSlotRestart': 1, 'setSlotCpuloadThreshold': 2, 'delSlotCpuloadThreshold': 3.
                   sleSlotSystemControlStatus 1.3.6.1.4.1.6296.101.2.11.1.2.2 slecontrolstatustype read-only
The status of user command
                   sleSlotSystemControlTimer 1.3.6.1.4.1.6296.101.2.11.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                   sleSlotSystemControlTimeStamp 1.3.6.1.4.1.6296.101.2.11.1.2.4 timeticks read-only
The time stamp of the last command(end of command)
                   sleSlotSystemControlReqResult 1.3.6.1.4.1.6296.101.2.11.1.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                   sleSlotSystemControlSlotIndex 1.3.6.1.4.1.6296.101.2.11.1.2.6 integer32 read-write
The system slot index.
                   sleSlotSystemControlCPULoadHighThreshold 1.3.6.1.4.1.6296.101.2.11.1.2.7 integer32 read-write
The high threshold of CPU load (70:default)
                   sleSlotSystemControlCPULoadHighThresholdTimer 1.3.6.1.4.1.6296.101.2.11.1.2.8 integer read-write
The high threshold timer of CPU load (sec) (60:default) Enumeration: 'timerInverval5': 1, 'timerInverval60': 2, 'timerInverval600': 3.
                   sleSlotSystemControlCPULoadLowThreshold 1.3.6.1.4.1.6296.101.2.11.1.2.9 integer32 read-write
The low threshold of CPU load (30:default)
                   sleSlotSystemControlCPULoadLowThresholdTimer 1.3.6.1.4.1.6296.101.2.11.1.2.10 integer read-write
The low threshold timer of CPU load (sec) (60:default) Enumeration: 'timerInverval5': 1, 'timerInverval60': 2, 'timerInverval600': 3.
               sleSlotSystemNotification 1.3.6.1.4.1.6296.101.2.11.1.3
                   sleSlotSystemRestart 1.3.6.1.4.1.6296.101.2.11.1.3.1
Description.
                   sleSlotSystemCPULoadChagned 1.3.6.1.4.1.6296.101.2.11.1.3.2
setSlotCpuloadThreshold
                   sleSlotSystemCPULoadDeleted 1.3.6.1.4.1.6296.101.2.11.1.3.3
delSlotCpuloadThreshold
           sleSlotStatusInfo 1.3.6.1.4.1.6296.101.2.11.2
               sleSlotStatusInfoTable 1.3.6.1.4.1.6296.101.2.11.2.1 no-access
Description.
                   sleSlotStatusInfoEntry 1.3.6.1.4.1.6296.101.2.11.2.1.1 no-access
Description.
                       sleSlotStatusPlan 1.3.6.1.4.1.6296.101.2.11.2.1.1.1 integer read-only
Planning status of slot. Enumeration: 'notPlanned': 1, 'planned': 2.
                       sleSlotStatusPlanCardType 1.3.6.1.4.1.6296.101.2.11.2.1.1.2 integer read-only
Planning card type status of slot. Enumeration: 'iuGT8': 43, 'siuGE4': 10, 'siuGE6': 25, 'iuGT4': 22, 'siuGE8': 26, 'iuGT6': 23, 'iuGEPON8': 32, 'v5548gGE12': 7, 'siuFE48': 17, 'sfu10GE4': 37, 'niu10GE2': 18, 'niu10GE4': 36, 'iu10GEPON8': 33, 'siuGPON4r': 8, 'siuGE10': 20, 'siuGE12': 2, 'unknown': 1, 'iuGEPON4': 30, 'siuGPON16': 38, 'niuGE12': 5, 'siuGPON4': 4, 'niuGE2': 28, 'siu10GE48': 19, 'iu10GE8': 31, 'niuGE4': 29, 'iu10GE4': 39, 'niuGE8': 9, 'sf': 6, 'iu10GE2': 41, 'niu10Ge2Plus': 21, 'siuGT24': 40, 'cwdm': 42, 'siuTDM': 15, 'niu10GPlus': 11, 'siuEPON12': 3, 'iu10GE': 12, 'siuGT6': 27, 'iuGE6': 13, 'iuGE4': 14, 'siu10GEPON8': 35, 'iuGE8': 34, 'siuGE24': 16, 'iuTDM6': 24.
                       sleSlotStatusCurrentInstall 1.3.6.1.4.1.6296.101.2.11.2.1.1.3 integer read-only
Currently installation status of slot. Enumeration: 'failed': 3, 'notInstalled': 1, 'installed': 2.
                       sleSlotStatusCurrentInstallCardType 1.3.6.1.4.1.6296.101.2.11.2.1.1.4 integer read-only
Currently installation card type status of slot. Enumeration: 'iuGT8': 43, 'siuGE4': 10, 'siuGE6': 25, 'iuGT4': 22, 'siuGE8': 26, 'iuGT6': 23, 'iuGEPON8': 32, 'iuGE10': 12, 'v5548gGE12': 7, 'siuFE48': 17, 'sfu10GE4': 37, 'niu10GE2': 18, 'niu10GE4': 36, 'iu10GEPON8': 33, 'siuGPON4r': 8, 'siuGE10': 20, 'siuGE12': 2, 'unknown': 1, 'iuGEPON4': 30, 'siuGPON16': 38, 'niuGE12': 5, 'siuGPON4': 4, 'niuGE2': 28, 'siu10GE48': 19, 'iu10GE8': 31, 'niuGE4': 29, 'iu10GE4': 39, 'niuGE8': 9, 'sf': 6, 'iu10GE2': 41, 'niu10Ge2Plus': 21, 'siuGT24': 40, 'cwdm': 42, 'siuTDM': 15, 'niu10GPlus': 11, 'siuEPON12': 3, 'siuGT6': 27, 'iuGE6': 13, 'iuGE4': 14, 'siu10GEPON8': 35, 'iuGE8': 34, 'siuGE24': 16, 'iuTDM6': 24.
                       sleSlotStatusCardOperation 1.3.6.1.4.1.6296.101.2.11.2.1.1.5 integer read-only
Currently operation status of slot. Enumeration: 'init': 2, 'disable': 1, 'enableStandby': 5, 'enable': 3, 'enableActive': 4.
                       sleSlotStatusLock 1.3.6.1.4.1.6296.101.2.11.2.1.1.6 integer read-only
Lock status of slot. Enumeration: 'locked': 2, 'unlocked': 1.
                       sleSlotStatusUpgradeMode 1.3.6.1.4.1.6296.101.2.11.2.1.1.7 integer read-only
Upgrade mode status of slot. Enumeration: 'auto': 2, 'manual': 1.
                       sleSlotStatusActionEvent 1.3.6.1.4.1.6296.101.2.11.2.1.1.8 integer no-access
Event of slot. (accessible-for-notify) Enumeration: 'configFailEvent': 11, 'installAction': 2, 'noPlanningAction': 3, 'planningAction': 4, 'bootEndEvent': 9, 'lockAction': 5, 'unlockAction': 6, 'unMatchedEvent': 8, 'matchedEvent': 7, 'configEndEvent': 10, 'uninstallAction': 1.
                       sleSlotStatusState 1.3.6.1.4.1.6296.101.2.11.2.1.1.9 integer no-access
Status of slot. (accessible-for-notify) Enumeration: 'actionBootReady': 5, 'actionEnableReady': 7, 'actionEnableLock': 9, 'planningWait': 2, 'actionConfig': 6, 'default': 1, 'installWait': 3, 'actionDisable': 10, 'operationReady': 4, 'actionEnable': 8.
                       sleSlotStatusPower 1.3.6.1.4.1.6296.101.2.11.2.1.1.10 integer read-only
Currently power status of slot. Enumeration: 'down': 2, 'up': 1.
                       sleSlotStatusSerialNumber 1.3.6.1.4.1.6296.101.2.11.2.1.1.11 octet string read-only
The serial number
                       sleSlotStatusHealthState 1.3.6.1.4.1.6296.101.2.11.2.1.1.12 integer read-only
The slot health status Enumeration: 'warning': 1, 'well': 0, 'timeout': 2.
                       sleslotStatusOverallState 1.3.6.1.4.1.6296.101.2.11.2.1.1.13 integer read-only
The slot overrall status Enumeration: 'bad': 1, 'good': 0.
                       sleslotStatusSyncState 1.3.6.1.4.1.6296.101.2.11.2.1.1.14 integer read-only
The slot sync status Enumeration: 'process': 2, 'none': 0, 'disable': 1, 'done': 3.
               sleSlotStatusControl 1.3.6.1.4.1.6296.101.2.11.2.2
                   sleSlotStatusControlRequest 1.3.6.1.4.1.6296.101.2.11.2.2.1 integer read-write
The request of a user command Enumeration: 'setSlotUpgradeMode': 5, 'setSlotPowerDown': 7, 'setSlotPlanning': 3, 'setSlotLock': 1, 'setSlotNoplanning': 4, 'setSlotPowerUp': 6, 'setSlotPowerReset': 8, 'setSlotUnlock': 2.
                   sleSlotStatusControlStatus 1.3.6.1.4.1.6296.101.2.11.2.2.2 slecontrolstatustype read-only
The status of user command
                   sleSlotStatusControlTimer 1.3.6.1.4.1.6296.101.2.11.2.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                   sleSlotStatusControlTimeStamp 1.3.6.1.4.1.6296.101.2.11.2.2.4 timeticks read-only
The time stamp of the last command(end of command)
                   sleSlotStatusControlReqResult 1.3.6.1.4.1.6296.101.2.11.2.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                   sleSlotStatusControlSlotIndex 1.3.6.1.4.1.6296.101.2.11.2.2.6 integer32 read-write
The system slot index. 255 is means all slot.
                   sleSlotStatusControlPlanCardType 1.3.6.1.4.1.6296.101.2.11.2.2.7 integer read-write
Planning card type status of slot. Enumeration: 'iuGT8': 43, 'siuGE4': 10, 'siuGE6': 25, 'iuGT4': 22, 'siuGE8': 26, 'iuGT6': 23, 'iuGEPON8': 32, 'iuGE10': 12, 'v5548gGE12': 7, 'siuFE48': 17, 'sfu10GE4': 37, 'niu10GE2': 18, 'niu10GE4': 36, 'iu10GEPON8': 33, 'siuGPON4r': 8, 'siuGE10': 20, 'siuGE12': 2, 'unknown': 1, 'iuGEPON4': 30, 'siuGPON16': 38, 'niuGE12': 5, 'siuGPON4': 4, 'niuGE2': 28, 'siu10GE48': 19, 'iu10GE8': 31, 'niuGE4': 29, 'iu10GE4': 39, 'niuGE8': 9, 'sf': 6, 'iu10GE2': 41, 'niu10Ge2Plus': 21, 'siuGT24': 40, 'cwdm': 42, 'siuTDM': 15, 'niu10GPlus': 11, 'siuEPON12': 3, 'siuGT6': 27, 'iuGE6': 13, 'iuGE4': 14, 'siu10GEPON8': 35, 'iuGE8': 34, 'siuGE24': 16, 'iuTDM6': 24.
                   sleSlotStatusControlUpgradeMode 1.3.6.1.4.1.6296.101.2.11.2.2.8 integer read-write
Upgrade mode status of slot. Enumeration: 'autoUpgradeManualReset': 3, 'auto': 2, 'manual': 1.
               sleSlotStatusNotification 1.3.6.1.4.1.6296.101.2.11.2.3
                   sleSlotStatusLocked 1.3.6.1.4.1.6296.101.2.11.2.3.1
Description.
                   sleSlotStatusUnlocked 1.3.6.1.4.1.6296.101.2.11.2.3.2
Description.
                   sleSlotStatusPlanning 1.3.6.1.4.1.6296.101.2.11.2.3.3
Description.
                   sleSlotStatusNoPlanning 1.3.6.1.4.1.6296.101.2.11.2.3.4
Description.
                   sleSlotStatusUpgradeModeChanged 1.3.6.1.4.1.6296.101.2.11.2.3.5
Description.
                   sleSlotStatusPowerUp 1.3.6.1.4.1.6296.101.2.11.2.3.6
Description.
                   sleSlotStatusPowerDown 1.3.6.1.4.1.6296.101.2.11.2.3.7
Description.
                   sleSlotStatusPowerReset 1.3.6.1.4.1.6296.101.2.11.2.3.8
Description.
           sleSlotNosInfo 1.3.6.1.4.1.6296.101.2.11.3
               sleSlotNosInfoTable 1.3.6.1.4.1.6296.101.2.11.3.1 no-access
Description.
                   sleSlotNosInfoEntry 1.3.6.1.4.1.6296.101.2.11.3.1.1 no-access
Description.
                       sleSlotNosVersion 1.3.6.1.4.1.6296.101.2.11.3.1.1.1 octet string read-only
NOS version of slot.
                       sleSlotNosRevision 1.3.6.1.4.1.6296.101.2.11.3.1.1.2 octet string read-only
NOS revision of slot.
                       sleSlotNosSize 1.3.6.1.4.1.6296.101.2.11.3.1.1.3 unsigned32 read-only
NOS size of slot.
                       sleSlotNosUpgradeStatus 1.3.6.1.4.1.6296.101.2.11.3.1.1.4 integer read-only
NOS upgrade status of slot. Enumeration: 'upgradeIdle': 1, 'upgradeFail': 4, 'upgradeStart': 2, 'upgradeDone': 3.
                       sleSlotNosStbVersion 1.3.6.1.4.1.6296.101.2.11.3.1.1.5 octet string read-only
Stand by NOS version of slot
                       sleSlotNosStbRevision 1.3.6.1.4.1.6296.101.2.11.3.1.1.6 octet string read-only
Stand by NOS revision of slot.
                       sleSlotNosStbSize 1.3.6.1.4.1.6296.101.2.11.3.1.1.7 unsigned32 read-only
Stand by NOS size of slot.
               sleSlotNosControl 1.3.6.1.4.1.6296.101.2.11.3.2
                   sleSlotNosControlRequest 1.3.6.1.4.1.6296.101.2.11.3.2.1 integer read-write
The request of a user command Enumeration: 'setSlotUpgarde': 1, 'upgradeSlotBootloader': 3, 'downloadSlotNos': 2.
                   sleSlotNosControlStatus 1.3.6.1.4.1.6296.101.2.11.3.2.2 slecontrolstatustype read-only
The status of user command
                   sleSlotNosControlTimer 1.3.6.1.4.1.6296.101.2.11.3.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                   sleSlotNosControlTimeStamp 1.3.6.1.4.1.6296.101.2.11.3.2.4 timeticks read-only
The time stamp of the last command(end of command)
                   sleSlotNosControlReqResult 1.3.6.1.4.1.6296.101.2.11.3.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                   sleSlotNosControlSlotIndex 1.3.6.1.4.1.6296.101.2.11.3.2.6 integer32 read-write
The system slot index.
                   sleSlotNosControlUpDownMethod 1.3.6.1.4.1.6296.101.2.11.3.2.7 integer read-write
1: using FTP 2: using TFTP Enumeration: 'ftp': 1, 'tftp': 2.
                   sleSlotNosControlUpDownFlag 1.3.6.1.4.1.6296.101.2.11.3.2.8 integer read-write
1. Uploading slot nos to the remote-host. 2. Downloading slot nos from the remote-host. Enumeration: 'download': 2, 'upload': 1.
                   sleSlotNosControlServerAddress 1.3.6.1.4.1.6296.101.2.11.3.2.9 ipaddress read-write
The remote-host's IP address.
                   sleSlotNosControlUserID 1.3.6.1.4.1.6296.101.2.11.3.2.10 octet string read-write
Account-name.
                   sleSlotNosControlPassword 1.3.6.1.4.1.6296.101.2.11.3.2.11 octet string read-write
Account-password.
                   sleSlotNosControlFileName 1.3.6.1.4.1.6296.101.2.11.3.2.12 octet string read-write
Slot nos file name.
               sleSlotNosNotification 1.3.6.1.4.1.6296.101.2.11.3.3
                   sleSlotNosUpgrade 1.3.6.1.4.1.6296.101.2.11.3.3.1
Description.
                   sleSlotNosDownload 1.3.6.1.4.1.6296.101.2.11.3.3.2
Description.
                   sleSlotNosBootloaderUpgrade 1.3.6.1.4.1.6296.101.2.11.3.3.3
Description.
           sleSlotReleasedIUNosInfo 1.3.6.1.4.1.6296.101.2.11.4
               sleSlotReleasedNIUNosVersion 1.3.6.1.4.1.6296.101.2.11.4.1 octet string read-only
Released NIU NOS image version on SFU.
               sleSlotReleasedNIUNosRevision 1.3.6.1.4.1.6296.101.2.11.4.2 octet string read-only
Released NIU NOS image revision on SFU.
               sleSlotReleasedNIUNosSize 1.3.6.1.4.1.6296.101.2.11.4.3 unsigned32 read-only
Released NIU NOS image size on SFU.
               sleSlotReleasedGPIUNosVersion 1.3.6.1.4.1.6296.101.2.11.4.4 octet string read-only
Released GPIU NOS image version on SFU.
               sleSlotReleasedGPIUNosRevision 1.3.6.1.4.1.6296.101.2.11.4.5 octet string read-only
Released GPIU NOS image revision on SFU.
               sleSlotReleasedGPIUNosSize 1.3.6.1.4.1.6296.101.2.11.4.6 unsigned32 read-only
Released GPIU NOS image size on SFU.
               sleSlotReleasedSIUNosVersion 1.3.6.1.4.1.6296.101.2.11.4.7 octet string read-only
Released SIU NOS image version on SFU.
               sleSlotReleasedSIUNosRevision 1.3.6.1.4.1.6296.101.2.11.4.8 octet string read-only
Released SIU NOS image revision on SFU.
               sleSlotReleasedSIUNosSize 1.3.6.1.4.1.6296.101.2.11.4.9 integer32 read-only
Released SIU NOS image size on SFU.
               sleSlotReleasedIU10GE8NosVersion 1.3.6.1.4.1.6296.101.2.11.4.10 octet string read-only
Released IU_10GE8 NOS image version on SFU.
               sleSlotReleasedIU10GE8NosRevision 1.3.6.1.4.1.6296.101.2.11.4.11 octet string read-only
Released IU_10GE8 NOS image revision on SFU.
               sleSlotReleasedIU10GE8NosSize 1.3.6.1.4.1.6296.101.2.11.4.12 integer32 read-only
Released IU_10GE8 NOS image size on SFU.
               sleSlotReleasedIU10GEPON8NosVersion 1.3.6.1.4.1.6296.101.2.11.4.13 octet string read-only
Released IU_10GEPON8 NOS image version on SFU.
               sleSlotReleasedIU10GEPON8NosRevision 1.3.6.1.4.1.6296.101.2.11.4.14 octet string read-only
Released IU_10GEPON8 NOS image revision on SFU.
               sleSlotReleasedIU10GEPON8NosSize 1.3.6.1.4.1.6296.101.2.11.4.15 integer32 read-only
Released IU_10GEPON8 NOS image size on SFU.
               sleSlotReleasedIUGEPON8NosVersion 1.3.6.1.4.1.6296.101.2.11.4.16 octet string read-only
Released IU_GEPON8 NOS image version on SFU.
               sleSlotReleasedIUGEPON8NosRevision 1.3.6.1.4.1.6296.101.2.11.4.17 octet string read-only
Released IU_GEPON8 NOS image revision on SFU
               sleSlotReleasedIUGEPON8NosSize 1.3.6.1.4.1.6296.101.2.11.4.18 integer32 read-only
Released IU_GEPON8 NOS image size on SFU.
           sleSlotPowerMon 1.3.6.1.4.1.6296.101.2.11.5
               sleSlotPowerMonTable 1.3.6.1.4.1.6296.101.2.11.5.1 no-access
The Power-Monitoring table.
                   sleSlotPowerMonEntry 1.3.6.1.4.1.6296.101.2.11.5.1.1 no-access
The Power-Monitoring entry.
                       sleSlotPowerMonIndex 1.3.6.1.4.1.6296.101.2.11.5.1.1.1 integer read-only
The physical index of power-monitoring object.
                       sleSlotPowerMonStatus 1.3.6.1.4.1.6296.101.2.11.5.1.1.2 integer read-only
The monitoring status of power-monitoring object. Enumeration: 'good': 2, 'unknown': 1, 'over': 4, 'overUnder': 6, 'bad': 3, 'under': 5.
                       sleSlotPowerMonVoltage 1.3.6.1.4.1.6296.101.2.11.5.1.1.3 gauge32 read-only
The voltage value of power-monitoring object. value 10000(1000v) indicate that FUSE.
           sleSlotAiu 1.3.6.1.4.1.6296.101.2.11.6
               sleSlotAiuRunStatus 1.3.6.1.4.1.6296.101.2.11.6.1 integer read-only
The slot AIU run status. Enumeration: 'on': 1, 'off': 0.
               sleSlotAiuAlarmStatus 1.3.6.1.4.1.6296.101.2.11.6.2 integer read-only
The slot AIU alarm status. Enumeration: 'on': 1, 'off': 0.
           sleSlotProtection 1.3.6.1.4.1.6296.101.2.11.7
               sleSlotProtectionBase 1.3.6.1.4.1.6296.101.2.11.7.1
                   sleSlotProtectionInfo 1.3.6.1.4.1.6296.101.2.11.7.1.1
                       sleSlotProtectionSystemStatus 1.3.6.1.4.1.6296.101.2.11.7.1.1.1 integer read-only
The system admin status(enable or disable) of overtemperature shutdown function. Enumeration: 'enable': 1, 'disable': 2.
                       sleSlotProtectionSystemThreshold 1.3.6.1.4.1.6296.101.2.11.7.1.1.2 integer32 read-only
The system admin threshold of overtemperature shutdown function.
                       sleSlotProtectionIUPowerStatus 1.3.6.1.4.1.6296.101.2.11.7.1.1.3 integer read-write
The slot power shutdown status Enumeration: 'enable': 1, 'disable': 2.
                   sleSlotProtectionControl 1.3.6.1.4.1.6296.101.2.11.7.1.2
                       sleSlotProtectionControlRequest 1.3.6.1.4.1.6296.101.2.11.7.1.2.1 integer read-write
The request of a user command Enumeration: 'setSlotProtectionSystemThresh': 2, 'setSlotProtectionSystemStatus': 1, 'setslotProtectionIUPowerStatus': 3.
                       sleSlotProtectionControlStatus 1.3.6.1.4.1.6296.101.2.11.7.1.2.2 slecontrolstatustype read-only
The status of user command
                       sleSlotProtectionControlTimer 1.3.6.1.4.1.6296.101.2.11.7.1.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                       sleSlotProtectionControlTimeStamp 1.3.6.1.4.1.6296.101.2.11.7.1.2.4 timeticks read-only
The time stamp of the last command(end of command)
                       sleSlotProtectionControlReqResult 1.3.6.1.4.1.6296.101.2.11.7.1.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                       sleSlotProtectionControlSystemStatus 1.3.6.1.4.1.6296.101.2.11.7.1.2.6 integer read-write
The system admin status(enable or disable) of overtemperature shutdown function. Enumeration: 'enable': 1, 'disable': 2.
                       sleSlotProtectionControlSystemThreshold 1.3.6.1.4.1.6296.101.2.11.7.1.2.7 integer32 read-write
The system admin threshold of overtemperature shutdown function.
                       sleSlotProtectionControlIUPowerStatus 1.3.6.1.4.1.6296.101.2.11.7.1.2.8 integer read-write
The slot power shutdown status Enumeration: 'enable': 1, 'disable': 2.
                   sleSlotProtectionNotification 1.3.6.1.4.1.6296.101.2.11.7.1.3
                       sleSlotProtectionSystemStatusChanged 1.3.6.1.4.1.6296.101.2.11.7.1.3.1
Description.
                       sleSlotProtectionSystemThreshChanged 1.3.6.1.4.1.6296.101.2.11.7.1.3.2
Description.
                       sleSlotProtectionIUPowerStatusChanged 1.3.6.1.4.1.6296.101.2.11.7.1.3.3
Description.
               sleSlotProtectionIU 1.3.6.1.4.1.6296.101.2.11.7.2
                   sleSlotProtectionIUTable 1.3.6.1.4.1.6296.101.2.11.7.2.1 no-access
Description.
                       sleSlotProtectionIUEntry 1.3.6.1.4.1.6296.101.2.11.7.2.1.1 no-access
Description.
                           sleSlotProtectionIUTemperHighThresh 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.1 integer32 read-only
The Slot temperature High-threshold of overtemperature alarm
                           sleSlotProtectionIUTemperLowThresh 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.2 integer32 read-only
The Slot temperature Low-threshold of overtemperature alarm
                           sleSlotProtectionIUPowerThresh 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.3 integer32 read-only
The Slot temperature threshold of overtemperature power shutdown.
                           sleSlotProtectionIUTemper 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.4 integer32 read-only
The Slot temperature.
                           sleSlotProtectionIUTemper2 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.5 integer32 read-only
The Slot temperature2.
                   sleSlotProtectionIUControl 1.3.6.1.4.1.6296.101.2.11.7.2.2
                       sleSlotProtectionIUControlRequest 1.3.6.1.4.1.6296.101.2.11.7.2.2.1 integer read-write
The request of a user command Enumeration: 'setSlotTempThreshold': 1, 'setSlotPowerThresh': 2.
                       sleSlotProtectionIUControlStatus 1.3.6.1.4.1.6296.101.2.11.7.2.2.2 slecontrolstatustype read-only
The status of user command
                       sleSlotProtectionIUControlTimer 1.3.6.1.4.1.6296.101.2.11.7.2.2.3 gauge32 read-write
The maximum time for the manager for a long running user command
                       sleSlotProtectionIUControlTimeStamp 1.3.6.1.4.1.6296.101.2.11.7.2.2.4 timeticks read-only
The time stamp of the last command(end of command)
                       sleSlotProtectionIUControlReqResult 1.3.6.1.4.1.6296.101.2.11.7.2.2.5 slecontrolrequestresulttype read-only
The result of the last user command
                       sleSlotProtectionIUControlindex 1.3.6.1.4.1.6296.101.2.11.7.2.2.6 integer32 read-write
the slot index
                       sleSlotProtectionIUControlTemperHighThresh 1.3.6.1.4.1.6296.101.2.11.7.2.2.7 integer32 read-write
The Slot temperature High-threshold of overtemperature alarm
                       sleSlotProtectionIUControlTemperLowThresh 1.3.6.1.4.1.6296.101.2.11.7.2.2.8 integer32 read-write
The Slot temperature Low-threshold of overtemperature alarm
                       sleSlotProtectionIUControlPowerThresh 1.3.6.1.4.1.6296.101.2.11.7.2.2.9 integer32 read-write
The Slot temperature threshold of overtemperature power shutdown.
                   sleSlotProtectionIUNotification 1.3.6.1.4.1.6296.101.2.11.7.2.3
                       sleSlotProtectionIUTemperThreshChanged 1.3.6.1.4.1.6296.101.2.11.7.2.3.1
Description.
                       sleSlotProtectionIUPowerThreshChanged 1.3.6.1.4.1.6296.101.2.11.7.2.3.2
Description.
     sleRF 1.3.6.1.4.1.6296.101.2.12
           sleRfBaseInfo 1.3.6.1.4.1.6296.101.2.12.1
               sleRfConnectStatus 1.3.6.1.4.1.6296.101.2.12.1.1 integer read-only
The RF connect status. Enumeration: 'disconnect': 2, 'connect': 1.
               sleRfPowerStatus 1.3.6.1.4.1.6296.101.2.12.1.2 integer read-only
The RF power status. Enumeration: 'poweroff': 0, 'poweron': 1.
               sleRfEthertype 1.3.6.1.4.1.6296.101.2.12.1.3 octet string read-only
The RF ethertype.
               sleRfSrcAddress 1.3.6.1.4.1.6296.101.2.12.1.4 octet string read-only
The RF source address.
               sleRfDesAddress 1.3.6.1.4.1.6296.101.2.12.1.5 octet string read-only
The RF destination address.
           sleRfBaseControl 1.3.6.1.4.1.6296.101.2.12.2
               sleRfBaseControlRequest 1.3.6.1.4.1.6296.101.2.12.2.1 integer read-write
The request of a user command. Enumeration: 'resetRfEthertype': 2, 'setRfEthertype': 1.
               sleRfBaseControlStatus 1.3.6.1.4.1.6296.101.2.12.2.2 slecontrolstatustype read-only
The status of user command.
               sleRfBaseControlTimer 1.3.6.1.4.1.6296.101.2.12.2.3 integer32 read-write
The maximum time for the manager for a long running user command.
               sleRfBaseControlTimeStamp 1.3.6.1.4.1.6296.101.2.12.2.4 timeticks read-only
The time stamp of the last command(end of command).
               sleRfBaseControlReqResult 1.3.6.1.4.1.6296.101.2.12.2.5 slecontrolrequestresulttype read-only
The result of user command.
               sleRfBaseControlRfEthertype 1.3.6.1.4.1.6296.101.2.12.2.6 octet string read-write
The Rf ethertype ,the format is 0xXXXX, default value is 0x8864.
           sleRfBaseNotification 1.3.6.1.4.1.6296.101.2.12.3
               sleRFBaseEthertypeChanged 1.3.6.1.4.1.6296.101.2.12.3.1
Description.
               sleRFBaseEthertypeResetChanged 1.3.6.1.4.1.6296.101.2.12.3.2
Description.
           sleRfPortTable 1.3.6.1.4.1.6296.101.2.12.4 no-access
Description.
               sleRfPortEntry 1.3.6.1.4.1.6296.101.2.12.4.1 no-access
Description.
                   sleRfPortIndex 1.3.6.1.4.1.6296.101.2.12.4.1.1 integer read-write
The RF port index.
                   sleRfPortAdminStatus 1.3.6.1.4.1.6296.101.2.12.4.1.2 integer read-write
The RF port adminStatus. Enumeration: 'na': 255, 'enable': 1, 'disable': 2.
                   sleRfPortOperStatus 1.3.6.1.4.1.6296.101.2.12.4.1.3 integer read-write
The RF port operStatus. Enumeration: 'na': 255, 'enable': 1, 'disable': 2.
           sleRFPortControl 1.3.6.1.4.1.6296.101.2.12.5
               sleRfPortControlRequest 1.3.6.1.4.1.6296.101.2.12.5.1 integer read-write
The request of a user command. Enumeration: 'setRfPortStatus': 1.
               sleRfPortControlStatus 1.3.6.1.4.1.6296.101.2.12.5.2 slecontrolstatustype read-only
The status of user command.
               sleRfPortControlTimer 1.3.6.1.4.1.6296.101.2.12.5.3 integer32 read-write
The maximum time for the manager for a long running user command.
               sleRfPortControlTimeStamp 1.3.6.1.4.1.6296.101.2.12.5.4 timeticks read-only
The time stamp of the last command(end of command).
               sleRfPortControlReqResult 1.3.6.1.4.1.6296.101.2.12.5.5 slecontrolrequestresulttype read-only
The result of user command.
               sleRfPortControlIndex 1.3.6.1.4.1.6296.101.2.12.5.6 integer32 read-write
The RF port index <1-8>.
               sleRfPortControlAdminStatus 1.3.6.1.4.1.6296.101.2.12.5.7 integer read-write
The RF port adminStatus. Enumeration: 'enable': 1, 'disable': 2.
           sleRFPortNotification 1.3.6.1.4.1.6296.101.2.12.6
               sleRfPortStatusChanged 1.3.6.1.4.1.6296.101.2.12.6.1
Description.
     sleEnvironmentMonitor 1.3.6.1.4.1.6296.101.2.13
           sleEMTable 1.3.6.1.4.1.6296.101.2.13.1 no-access
Description.
               sleEMEntry 1.3.6.1.4.1.6296.101.2.13.1.1 no-access
Description.
                   sleEMInputIndex 1.3.6.1.4.1.6296.101.2.13.1.1.1 integer32 read-only
The environment monitoring input index(1-4).
                   sleEMAlarmString 1.3.6.1.4.1.6296.101.2.13.1.1.2 octet string read-only
The alarm string
                   sleEMAlarmSeverity 1.3.6.1.4.1.6296.101.2.13.1.1.3 integer read-only
The alarm severity. Enumeration: 'none': 0, 'major': 2, 'warning': 4, 'critical': 1, 'intermediate': 5, 'minor': 3.
                   sleEMmode 1.3.6.1.4.1.6296.101.2.13.1.1.4 integer read-only
The environment monitoring mode.(default:normal-close) Enumeration: 'normalClose': 0, 'normalOpen': 1.
           sleEMControl 1.3.6.1.4.1.6296.101.2.13.2
               sleEMControlRequest 1.3.6.1.4.1.6296.101.2.13.2.1 integer read-write
The request of a user command. Enumeration: 'delEM': 2, 'setEM': 1.
               sleEMControlStatus 1.3.6.1.4.1.6296.101.2.13.2.2 slecontrolstatustype read-only
Description.
               sleEMControlTimer 1.3.6.1.4.1.6296.101.2.13.2.3 gauge32 read-only
The maximum time for the manager for a long running user command. Apply your setting.
               sleEMControlTimeStamp 1.3.6.1.4.1.6296.101.2.13.2.4 timeticks read-only
Description.
               sleEMControlReqResult 1.3.6.1.4.1.6296.101.2.13.2.5 slecontrolrequestresulttype read-only
Description.
               sleEMControlInputIndex 1.3.6.1.4.1.6296.101.2.13.2.6 integer32 read-write
The environment monitoring input index(1-4).
               sleEMControlAlarmString 1.3.6.1.4.1.6296.101.2.13.2.7 octet string read-write
The alarm string
               sleEMControlAlarmSeverity 1.3.6.1.4.1.6296.101.2.13.2.8 integer read-write
The alarm severity. Enumeration: 'none': 0, 'major': 2, 'warning': 4, 'critical': 1, 'intermediate': 5, 'minor': 3.
               sleEMControlmode 1.3.6.1.4.1.6296.101.2.13.2.9 integer read-write
The environment monitoring mode.(default:normal-close) Enumeration: 'normalClose': 0, 'normalOpen': 1.
           sleEMNotification 1.3.6.1.4.1.6296.101.2.13.3
               sleEMChanged 1.3.6.1.4.1.6296.101.2.13.3.1
Description.
               sleEMDeleted 1.3.6.1.4.1.6296.101.2.13.3.2
Description.
     sleBypass 1.3.6.1.4.1.6296.101.2.14
           sleBypassBase 1.3.6.1.4.1.6296.101.2.14.1
               sleBypassBaseInfo 1.3.6.1.4.1.6296.101.2.14.1.1
                   sleBypassMode 1.3.6.1.4.1.6296.101.2.14.1.1.1 integer read-only
optic bypass mode Enumeration: 'on': 1, 'off': 2, 'auto': 3.
                   sleBypassStatus 1.3.6.1.4.1.6296.101.2.14.1.1.2 integer read-only
optic bypass status Enumeration: 'enable': 1, 'disable': 2.
               sleBypassBaseControl 1.3.6.1.4.1.6296.101.2.14.1.2
                   sleBypassBaseControlRequest 1.3.6.1.4.1.6296.101.2.14.1.2.1 integer read-write
Description. Enumeration: 'setBypassMode': 1.
                   sleBypassBaseControlStatus 1.3.6.1.4.1.6296.101.2.14.1.2.2 slecontrolstatustype read-only
The status of user command.
                   sleBypassBaseControlTimer 1.3.6.1.4.1.6296.101.2.14.1.2.3 integer32 read-write
The maximum time for the manager for a long running user command.
                   sleBypassBaseControlTimeStamp 1.3.6.1.4.1.6296.101.2.14.1.2.4 timeticks read-only
The time stamp of the last command(end of command).
                   sleBypassBaseControlReqResult 1.3.6.1.4.1.6296.101.2.14.1.2.5 slecontrolrequestresulttype read-only
The result of user command.
                   sleBypassBaseControlMode 1.3.6.1.4.1.6296.101.2.14.1.2.6 integer read-write
optic bypass mode Enumeration: 'on': 1, 'off': 2, 'auto': 3.
               sleBypassBaseNotification 1.3.6.1.4.1.6296.101.2.14.1.3
                   sleBypassModeChanged 1.3.6.1.4.1.6296.101.2.14.1.3.1
setBypassMode(1)
           sleBypassOption 1.3.6.1.4.1.6296.101.2.14.2
               sleBypassOptionConnectivityTable 1.3.6.1.4.1.6296.101.2.14.2.1 no-access
The connectivity option of bypass
                   sleBypassOptionConnectivityEntry 1.3.6.1.4.1.6296.101.2.14.2.1.1 no-access
Description.
                       sleBypassOptionConnectivityAddress 1.3.6.1.4.1.6296.101.2.14.2.1.1.1 ipaddress read-only
The target IP address of bypass health-checking
                       sleBypassOptionConnectivityPort 1.3.6.1.4.1.6296.101.2.14.2.1.1.2 integer32 read-only
The target port of bypass health-checking.
               sleBypassOptionConnectivityControl 1.3.6.1.4.1.6296.101.2.14.2.2
                   sleBypassOptionConnectivityControlRequest 1.3.6.1.4.1.6296.101.2.14.2.2.1 integer read-write
setBypassConnectivity(1) : bypass-check-option connectivity (A.B.C.D) PORT unsetBypassConnectivity(2) : no bypass-check option connectivity Enumeration: 'setBypassConnectivity': 1, 'unsetBypassConnectivity': 2.
                   sleBypassOptionConnectivityControlStatus 1.3.6.1.4.1.6296.101.2.14.2.2.2 slecontrolstatustype read-only
The status of user command.
                   sleBypassOptionConnectivityControlTimer 1.3.6.1.4.1.6296.101.2.14.2.2.3 integer32 read-write
The maximum time for the manager for a long running user command.
                   sleBypassOptionConnectivityControlTimeStamp 1.3.6.1.4.1.6296.101.2.14.2.2.4 timeticks read-only
The time stamp of the last command(end of command).
                   sleBypassOptionConnectivityControlReqResult 1.3.6.1.4.1.6296.101.2.14.2.2.5 slecontrolrequestresulttype read-only
The result of user command.
                   sleBypassOptionConnectivityControlAddress 1.3.6.1.4.1.6296.101.2.14.2.2.6 ipaddress read-write
The target IP address of bypass health-checking
                   sleBypassOptionConnectivityControlPort 1.3.6.1.4.1.6296.101.2.14.2.2.7 integer32 read-write
he target port of bypass health-checking
               sleBypassOptionConnectivityNotification 1.3.6.1.4.1.6296.101.2.14.2.3
                   sleBypassOptionConnectivitySet 1.3.6.1.4.1.6296.101.2.14.2.3.1
Description.
                   sleBypassOptionConnectivityUnset 1.3.6.1.4.1.6296.101.2.14.2.3.2
Description.
               sleBypassOptionPingTable 1.3.6.1.4.1.6296.101.2.14.2.4 no-access
Description.
                   sleBypassOptionPingEntry 1.3.6.1.4.1.6296.101.2.14.2.4.1 no-access
Description.
                       sleBypassOptionPingAddress 1.3.6.1.4.1.6296.101.2.14.2.4.1.1 ipaddress read-only
The target IP address of bypass ping health checking
                       sleBypassOptionPingTransInterval 1.3.6.1.4.1.6296.101.2.14.2.4.1.2 integer32 read-only
The ping transaction interval
                       sleBypassOptionPingTranNumber 1.3.6.1.4.1.6296.101.2.14.2.4.1.3 integer32 read-only
The ping transaction request number
                       sleBypassOptionPingReqInterval 1.3.6.1.4.1.6296.101.2.14.2.4.1.4 integer32 read-only
The ping request interval
                       sleBypassOptionPingReqTimeout 1.3.6.1.4.1.6296.101.2.14.2.4.1.5 integer32 read-only
The ping request timeout
                       sleBypassOptionPingLossThresh 1.3.6.1.4.1.6296.101.2.14.2.4.1.6 integer32 read-only
The ping loss threshold
               sleBypassOptionPingControl 1.3.6.1.4.1.6296.101.2.14.2.5
                   sleBypassOptionPingControlRequest 1.3.6.1.4.1.6296.101.2.14.2.5.1 integer read-write
The request of a user command. Enumeration: 'unsetBypassPing': 2, 'setBypassPing': 1.
                   sleBypassOptionPingControlStatus 1.3.6.1.4.1.6296.101.2.14.2.5.2 slecontrolstatustype read-only
The status of user command.
                   sleBypassOptionPingControlTimer 1.3.6.1.4.1.6296.101.2.14.2.5.3 integer32 read-write
The maximum time for the manager for a long running user command.
                   sleBypassOptionPingControlTimeStamp 1.3.6.1.4.1.6296.101.2.14.2.5.4 timeticks read-only
The time stamp of the last command(end of command).
                   sleBypassOptionPingControlReqResult 1.3.6.1.4.1.6296.101.2.14.2.5.5 slecontrolrequestresulttype read-only
The result of user command.
                   sleBypassOptionPingControlAddress 1.3.6.1.4.1.6296.101.2.14.2.5.6 ipaddress read-write
The target IP address of bypass ping health-checking
                   sleBypassOptionPingControlTransInterval 1.3.6.1.4.1.6296.101.2.14.2.5.7 integer32 read-write
The ping transaction interval
                   sleBypassOptionPingControlTranNumber 1.3.6.1.4.1.6296.101.2.14.2.5.8 integer32 read-write
The ping transaction request number
                   sleBypassOptionPingControlReqInterval 1.3.6.1.4.1.6296.101.2.14.2.5.9 integer32 read-write
The ping request interval
                   sleBypassOptionPingControlReqTimeout 1.3.6.1.4.1.6296.101.2.14.2.5.10 integer32 read-write
The ping request timeout
                   sleBypassOptionPingControlLossThresh 1.3.6.1.4.1.6296.101.2.14.2.5.11 integer32 read-write
The ping loss threshold
               sleBypassOptionPingNotification 1.3.6.1.4.1.6296.101.2.14.2.6
                   sleBypassOptionPingSet 1.3.6.1.4.1.6296.101.2.14.2.6.1
Description.
                   sleBypassOptionPingUnset 1.3.6.1.4.1.6296.101.2.14.2.6.2
Description.
               sleBypassOptionLinkMonitorTable 1.3.6.1.4.1.6296.101.2.14.2.7 no-access
Description.
                   sleBypassOptionLinkMonitorEntry 1.3.6.1.4.1.6296.101.2.14.2.7.1 no-access
Description.
                       sleBypassOptionLinkMonitorPort 1.3.6.1.4.1.6296.101.2.14.2.7.1.1 integer32 read-only
The port of bypass link health-checking
                       sleBypassOptionLinkMonitorPortStatus 1.3.6.1.4.1.6296.101.2.14.2.7.1.2 integer read-only
The port status of bypass link health-checking Enumeration: 'enable': 1.
               sleBypassOptionLinkMonitorControl 1.3.6.1.4.1.6296.101.2.14.2.8
                   sleBypassOptionLinkMonitorControlRequest 1.3.6.1.4.1.6296.101.2.14.2.8.1 integer read-write
The request of a user command. Enumeration: 'setBypassLinkMonitor': 1.
                   sleBypassOptionLinkMonitorControlStatus 1.3.6.1.4.1.6296.101.2.14.2.8.2 slecontrolstatustype read-only
The status of user command.
                   sleBypassOptionLinkMonitorControlTimer 1.3.6.1.4.1.6296.101.2.14.2.8.3 integer32 read-write
The maximum time for the manager for a long running user command.
                   sleBypassOptionLinkMonitorControlTimeStamp 1.3.6.1.4.1.6296.101.2.14.2.8.4 timeticks read-only
The time stamp of the last command(end of command).
                   sleBypassOptionLinkMonitorControlReqResult 1.3.6.1.4.1.6296.101.2.14.2.8.5 slecontrolrequestresulttype read-only
The result of user command.
                   sleBypassOptionLinkMonitorControlPort 1.3.6.1.4.1.6296.101.2.14.2.8.6 integer32 read-write
The port of bypass link health-checking
                   sleBypassOptionLinkMonitorControlPortStatus 1.3.6.1.4.1.6296.101.2.14.2.8.7 integer read-write
The port status of bypass link health-checking Enumeration: 'enable': 1, 'disable': 2.
               sleBypassOptioLinkMonitorNotification 1.3.6.1.4.1.6296.101.2.14.2.9
                   sleBypassOptionLinkMonitorChanged 1.3.6.1.4.1.6296.101.2.14.2.9.1
Description.
     sleHFC 1.3.6.1.4.1.6296.101.2.15
           sleHFCTable 1.3.6.1.4.1.6296.101.2.15.1 no-access
Description.
               sleHFCEntry 1.3.6.1.4.1.6296.101.2.15.1.1 no-access
Description.
                   sleHFCOptic1550OTX 1.3.6.1.4.1.6296.101.2.15.1.1.1 octet string read-only
HFC Optic 1550 OTX value.
                   sleHFCOptic1550OTXAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.2 integer read-only
HFC Optic 1550 OTX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCOpticUpstreamOTX 1.3.6.1.4.1.6296.101.2.15.1.1.3 octet string read-only
HFC Optic Upstream OTX value.
                   sleHFCOpticUpstreamOTXAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.4 integer read-only
HFC Optic Upstream OTX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCOpticDownstreamORX 1.3.6.1.4.1.6296.101.2.15.1.1.5 octet string read-only
HFC Optic Downstream ORX value.
                   sleHFCOpticDownstreamORXAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.6 integer read-only
HFC Optic Downstream ORX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1OTX 1.3.6.1.4.1.6296.101.2.15.1.1.7 octet string read-only
HFC EDFA1 OTX value.
                   sleHFCEDFA1OTXAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.8 integer read-only
HFC EDFA1 OTX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1ORX 1.3.6.1.4.1.6296.101.2.15.1.1.9 octet string read-only
HFC EDFA1 ORX value.
                   sleHFCEDFA1ORXAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.10 integer read-only
HFC EDFA1 ORX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1LD1Current 1.3.6.1.4.1.6296.101.2.15.1.1.11 octet string read-only
HFC EDFA1 LD1 Current value.
                   sleHFCEDFA1LD1CurrentAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.12 integer read-only
HFC EDFA1 LD1 Current alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1LD2Current 1.3.6.1.4.1.6296.101.2.15.1.1.13 octet string read-only
HFC EDFA1 LD2 Current value.
                   sleHFCEDFA1LD2CurrentAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.14 integer read-only
HFC EDFA1 LD2 Current alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1LD1Temp 1.3.6.1.4.1.6296.101.2.15.1.1.15 octet string read-only
HFC EDFA1 LD1 Temp value.
                   sleHFCEDFA1LD1TempAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.16 integer read-only
HFC EDFA1 LD1 Temp alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1LD2Temp 1.3.6.1.4.1.6296.101.2.15.1.1.17 octet string read-only
HFC EDFA1 LD2 Temp value.
                   sleHFCEDFA1LD2TempAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.18 integer read-only
HFC EDFA1 LD2 Temp alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA1CaseTemp 1.3.6.1.4.1.6296.101.2.15.1.1.19 octet string read-only
HFC EDFA1 Case Temp value.
                   sleHFCEDFA1CaseTempAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.20 integer read-only
HFC EDFA1 Case Temp alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2OTX 1.3.6.1.4.1.6296.101.2.15.1.1.21 octet string read-only
HFC EDFA2 OTX value.
                   sleHFCEDFA2OTXAarm 1.3.6.1.4.1.6296.101.2.15.1.1.22 integer read-only
HFC EDFA2 OTX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2ORX 1.3.6.1.4.1.6296.101.2.15.1.1.23 octet string read-only
HFC EDFA2 ORX value.
                   sleHFCEDFA2ORXAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.24 integer read-only
HFC EDFA2 ORX alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2LD1Current 1.3.6.1.4.1.6296.101.2.15.1.1.25 octet string read-only
HFC EDFA2 LD1 Current value.
                   sleHFCEDFA2LD1CurrentAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.26 integer read-only
HFC EDFA2 LD1 Current alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2LD2Current 1.3.6.1.4.1.6296.101.2.15.1.1.27 octet string read-only
HFC EDFA2 LD2 Current value.
                   sleHFCEDFA2LD2CurrentAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.28 integer read-only
HFC EDFA2 LD2 Current alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2LD1Temp 1.3.6.1.4.1.6296.101.2.15.1.1.29 octet string read-only
HFC EDFA2 LD1 Temp value.
                   sleHFCEDFA2LD1TempAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.30 integer read-only
HFC EDFA2 LD1 Temp alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2LD2Temp 1.3.6.1.4.1.6296.101.2.15.1.1.31 octet string read-only
HFC EDFA2 LD2 Temp value.
                   sleHFCEDFA2LD2TempAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.32 integer read-only
HFC EDFA2 LD2 Temp alarm status. Enumeration: 'on': 1, 'off': 0.
                   sleHFCEDFA2CaseTemp 1.3.6.1.4.1.6296.101.2.15.1.1.33 octet string read-only
HFC EDFA2 Case Temp value.
                   sleHFCEDFA2CaseTempAlarm 1.3.6.1.4.1.6296.101.2.15.1.1.34 integer read-only
HFC EDFA2 Case Temp alarm status. Enumeration: 'on': 1, 'off': 0.
           sleHFCControl 1.3.6.1.4.1.6296.101.2.15.2
               sleHFCControlRequest 1.3.6.1.4.1.6296.101.2.15.2.1 integer read-write
The request of a user command Enumeration: 'setHFCAlarmStatus': 1.
               sleHFCControlStatus 1.3.6.1.4.1.6296.101.2.15.2.2 slecontrolstatustype read-only
The status of user command
               sleHFCControlTimer 1.3.6.1.4.1.6296.101.2.15.2.3 gauge32 read-write
The maximum time for the manager for a long running user command.
               sleHFCControlTimeStamp 1.3.6.1.4.1.6296.101.2.15.2.4 timeticks read-only
The time stamp of the last command(end of command)
               sleHFCControlReqResult 1.3.6.1.4.1.6296.101.2.15.2.5 slecontrolrequestresulttype read-only
The result of the last user command
               sleHFCControlAlarmIndex 1.3.6.1.4.1.6296.101.2.15.2.6 integer read-write
The HFC alarm index , edfa1 /edfa2 /optic . Enumeration: 'hfcoptic': 2, 'hfcefda2': 1, 'hfcefda1': 0.
               sleHFCControlAlarmStatus 1.3.6.1.4.1.6296.101.2.15.2.7 integer read-write
The HFC alrm status. Enumeration: 'enable': 1, 'disable': 0.
           sleHFCNotification 1.3.6.1.4.1.6296.101.2.15.3
               sleHFCOpticAlarmStatusChanged 1.3.6.1.4.1.6296.101.2.15.3.1
HFC Alarm Status Changed.
     sleDeviceGroup 1.3.6.1.4.1.6296.101.2.16
Description.
     sleDeviceNotificationGroup 1.3.6.1.4.1.6296.101.2.17
Description.