SLE-BRIDGE-MIB: View SNMP OID List / Download MIB

This MIB contains all needed informations about bridgePorts and all supported sle bridgeing features.

System MAC Address of bridge

Number of bridge ports

This value assigned to the aggregation max id.

The LACP enabled/disabled status of the switch Enumeration: 'disabled': 0, 'enabled': 1.

The priority assigned to the Actor System

The supported VLAN mode for ingress untagged frame Bits: 'protocolbased': 1, 'portbased': 0, 'subnetbased': 2.

sleBridgeVlanMaxNum

programmable Double Tag Protocol Identifier. It means outerTPID. Enumeration: 'dtag8100': 33024, 'dtag9100': 37120.

Mirror mode of bridge Enumeration: 'disabled': 0, 'enabled': 1.

Mirroring port ID 1-254: physical port ID 255: mirror to cpu

Ingress mirrored port map

Egress mirrored port map

Limit maximum number of MAC addresses learning newly per unit time(one second) on a bridge. (0: nothing learned, -l: unlimited.)

The timeout period in seconds for aging out dynamically learned forwarding information.

The supported maximum fdb entries.

Number of Fdb entries learned currently.

Stack status of device. Enumeration: 'slave': 2, 'disable': 0, 'master': 1.

Device name of stack device.

Node ID of stack device

The interval at which LLDP frames are transmitted on behalf of this LLDP agent.

The time-to-live value expressed as a multiple of the sleBridgeLldpMessageTxInterval object.

Delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.

Delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.

The agent must not generate more than one lldpRemTablesChangenotification-event in the indicated period.

The value of sysUpTime object (defined in IETF RFC 3418)at the time an entry is created, modified, or deleted in thein tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems.

The number of times the complete set of informationadvertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects.

The number of times the complete set of informationadvertised by a particular MSAP has been deleted fromtables contained in lldpRemoteSystemsData and lldpExtensions objects.

The number of times the complete set of information advertised by a particular MSAP could not be entered intotables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.

The number of times the complete set of informationadvertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objectsbecause the information timeliness interval has expired.

The type of encoding used to identify the chassis associated with the local system. Enumeration: 'macAddress': 4, 'networkAddress': 5, 'interfaceName': 6, 'interfaceAlias': 2, 'chassisComponent': 1, 'local': 7, 'portComponent': 3.

The string value used to identify the chassis component associated with the local system.

The string value used to identify the system name of the local system.

The string value used to identify the system description of the local system.

The bitmap value used to identify which system capabilities are supported on the local system. Bits: 'bridge': 2, 'wlanAccessPoint': 3, 'repeater': 1, 'stationOnly': 7, 'telephone': 5, 'docsisCableDevice': 6, 'other': 0, 'router': 4.

The bitmap value used to identify which system capabilities are enabled on the local system. Bits: 'bridge': 2, 'wlanAccessPoint': 3, 'repeater': 1, 'stationOnly': 7, 'telephone': 5, 'docsisCableDevice': 6, 'other': 0, 'router': 4.

The STP enabled/disabled status of the switch. Enumeration: 'disabled': 0, 'enabled': 1.

The STP self loop 0: disabled 1: enabled Enumeration: 'enable': 1, 'disable': 0.

The value used to identify that a isolated port can be associated with only one or entire promiscuous ports on the local system. Enumeration: 'enable': 1, 'disable': 0.

The value permits only when transmitted cookies are returned after sending cookies with SYN Enumeration: 'enable': 1, 'disable': 0.

The value configures not to send the message that informs TCP connection cannot be done. Enumeration: 'enable': 1, 'disable': 0.

The value configures auto Interface activation. (supported only model 5924N) Enumeration: 'enable': 1, 'disable': 2.

The global adminStatus of Loop-Detect. Enumeration: 'enable': 1, 'disable': 2.

The type of srcmac to be detected. 1.laa : Locally Administered Address 2.system : System MAC (default) Enumeration: 'laa': 1, 'system': 2.

The value is used to indicate promiscuous ports selection mode: normal ?default manual ? by user stp ? by STP (not supported) erp ? by ERP Enumeration: 'stp': 2, 'manual': 1, 'erp': 3, 'normal': 0.

Bitmap of promiscuous ports on bridge.

programmable Inner Double Tag Protocol Identifier. It means innerTPID Enumeration: 'dtag8100': 33024, 'dtag9100': 37120.

Unknown multicast block setting for all ports. Enumeration: 'enable': 1, 'disable': 2.

ECMP Hash Type Enumeration: 'sipDip': 2, 'sip': 1.

The tcp-synguard bandwidth.

programmable outer Double Tag Protocol Identifier. It means OutTPID Enumeration: 'dtag8100': 33024, 'dtag9100': 37120.

The protect uplink mac address Enumeration: 'enable': 1, 'disable': 2.

The mac address replace mode Enumeration: 'enable': 1, 'disable': 2.

The Storm Control Broadcast Configuration 0: disable bcast

The Storm Control DLF Configuration 0: disable DLF

The Storm Control MultiCast Configuration 0: disable multicast

The MAC Learning Mode. 1: cml 2: sml 3: cmlsml Enumeration: 'cml': 1, 'sml': 2, 'cmlsml': 3.

The LAG global distmode. Enumeration: 'srcdstip': 6, 'none': 0, 'dstip': 5, 'srcmac': 1, 'dstmac': 2, 'label': 8, 'srcip': 4, 'srcdstl4': 7, 'srcdstmac': 3.

The Multi port LLCF - RAPS East/West Port.

The Multi port LLCF - RAPS East/West Port.

The Multi port LLCF - force down ports

The Multi port LLCF - force down ports

The Multi port LLCF port's status. Enumeration: 'loc': 1, 'none': 0, 'disable': 2, 'forcedToDown': 3.

The Multi port LLCF port's status. Enumeration: 'loc': 1, 'none': 0, 'disable': 2, 'forcedToDown': 3.

The Multi port LLCF port's status. Enumeration: 'loc': 1, 'none': 0, 'disable': 2, 'forcedToDown': 3.

The Multi port LLCF port's status. Enumeration: 'loc': 1, 'none': 0, 'disable': 2, 'forcedToDown': 3.

The LLCF's checking interval. 1000~10000ms (default: 2500ms)

The channel group LACP max bundle (range 1..8)

The channel group system priority (default:32768)

The object is display bridgeId

This object to display the bridge Protocol Enumeration: 'enableBridgeProtocolProviderMstp': 3, 'none': 0, 'enableBridgeProtocolProviderMstpEdge': 4, 'enableBridgeProtocolIeee': 1, 'enableBridgeProtocolIeeeVlan': 2.

The request of a user command Enumeration: 'setOuterTagProtoId': 18, 'delMultiPortLlcf': 25, 'setDoubleTagProtoId': 2, 'setStpProfile': 8, 'setInnerTagProtoId': 14, 'setChannelGroupLacpMaxBundle': 27, 'setMacLearningMode': 22, 'delChannelGroupSystemPriority': 30, 'setMultiPortLlcfTimer': 26, 'setPvlanPromSelectMode': 13, 'setStormControl': 21, 'setLoopDetectProfile': 12, 'setLldpProfile': 7, 'setTcpSynguard': 17, 'setLacpProfile': 1, 'setMacAntiSpoofing': 19, 'setTcpSyncookie': 9, 'unsetBridgeProtocol': 32, 'setMirrorProfile': 3, 'setMaxLearnPerUnit': 4, 'setChannelGroupSystemPriority': 29, 'setMacReplace': 20, 'setUnknownMcastBlockAllPorts': 15, 'setLagGlobalDistMode': 23, 'setAutoInterfaceActivation': 11, 'setEcmpHashType': 16, 'setMultiPortLlcf': 24, 'setTcpIgnoreRstUnknown': 10, 'setStackProfile': 6, 'setFdbAgeingTime': 5, 'setBridgeProtocol': 31, 'delChannelGroupLacpMaxBundle': 28.

The status of user command

The maximum time for the manager for a long running user command

The time stamp of the last command(end of command)

The result of the last user command

The LACP enabled/disabled status of the switch Enumeration: 'disabled': 0, 'enabled': 1.

The priority assigned to the Actor System

programmable Double Tag Protocol Identifier. It means outerTPID.

Mirror mode of bridge Enumeration: 'disabled': 0, 'enabled': 1.

Mirroring port ID 1-254: physical port ID 255: mirror to cpu

Limit maximum number of MAC addresses learning newly per unit time(one second) on a bridge. (0: nothing learned, -l: unlimited.)

The timeout period in seconds for aging out dynamically learned forwarding information.

Stack status of device. Enumeration: 'slave': 2, 'disable': 0, 'master': 1.

Device name of stack device.

The interval at which LLDP frames are transmitted on behalf of this LLDP agent.

The time-to-live value expressed as a multiple of the sleBridgeLldpMessageTxInterval object.

Delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.

Delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.

The agent must not generate more than one lldpRemTablesChangenotification-event in the indicated period.

The STP enabled/disabled status of the switch. Enumeration: 'disabled': 0, 'enabled': 1.

The STP self loop 0: disabled 1: enabled Enumeration: 'enable': 1, 'disable': 0.

The value permits only when transmitted cookies are returned after sending cookies with SYN Enumeration: 'enable': 1, 'disable': 0.

The value configures not to send the message that informs TCP connection cannot be done. Enumeration: 'enable': 1, 'disable': 0.

The value configures auto Interface activation. (supported only model 5924N) Enumeration: 'enable': 1, 'disable': 2.

The global adminStatus of Loop-Detect. Enumeration: 'enable': 1, 'disable': 2.

The type of srcmac to be detected. 1.laa : Locally Administered Address 2.system : System MAC (default) Enumeration: 'laa': 1, 'system': 2.

The value is used to indicate promiscuous ports selection mode: normal ?default manual ? by user stp ? by STP (not supported) erp ? by ERP Enumeration: 'stp': 2, 'manual': 1, 'erp': 3, 'normal': 0.

Valid if only if sleBridgeControlPvlanPromSelectMode is not manual. If sleBridgePvlanOnePromPortEnable is enabled, then it can only indicate one port or none.

programmable Inner Double Tag Protocol Identifier. It means innerTPID. Enumeration: 'dtag8100': 33024, 'dtag9100': 37120.

Unknown multicast block setting for all ports. Enumeration: 'enable': 1, 'disable': 2.

ECMP Hash Type Enumeration: 'sipDip': 2, 'sip': 1.

The tcp-synguard bandwidth.

programmable outer Double Tag Protocol Identifier. It means OutTPID Enumeration: 'dtag8100': 33024, 'dtag9100': 37120.

The protect uplink mac address 2011/01/20 V5924CR supports. Enumeration: 'enable': 1, 'disable': 2.

The mac address replace mode 2011/01/20 V5924CR supports. Enumeration: 'enable': 1, 'disable': 2.

The Storm Control Broadcast Configuration 0: disable bcast

The Storm Control DLF Configuration 0: disable DLF

The Storm Control Multicast Configuration 0: disable multicast

The MAC Learning Mode. 1: cml 2: sml 3: cmlsml Enumeration: 'cml': 1, 'sml': 2, 'cmlsml': 3.

The LAG global distmode. Enumeration: 'srcdstip': 6, 'none': 0, 'dstip': 5, 'srcmac': 1, 'dstmac': 2, 'label': 8, 'srcip': 4, 'srcdstl4': 7, 'srcdstmac': 3.

The Multi port LLCF - RAPS East/West Port.

The Multi port LLCF - RAPS East/West Port.

The Multi port LLCF - force down ports

The LLCF's checking interval. 1000~10000ms (default:2500ms) clear set value is -1.

The channel group LACP max bundle (range 1..8)

The channel group system priority (default:32768)

This object is used to set the bridgeid

This object to display the bridge Protocol Enumeration: 'enableBridgeProtocolIeee': 1, 'enableBridgeProtocolProviderMstpEdge': 4, 'enableBridgeProtocolIeeeVlan': 2, 'enableBridgeProtocolProviderMstp': 3.

Description.

Changed Fdb ageding time.

Changed Stack device's profile.

Description.

Description.

Description.

Description.

Description.

Description.

Description.

Description.

Description.

sleBridgeControlOuterTagProtoId

Description.

Description.

Description.

Description.

setLagGlobalDistMode

setMultiPortLlcf

delMultiPortLlcf

setMultiPortLlcfTimer

setChannelGroupLacpMaxBundle

delChannelGroupLacpMaxBundle

setChannelGroupSystemPriority

delChannelGroupSystemPriority

Bridge Port Table

Bridge Port Entry key: sleBridgePortIndex

Same as ifIndex (for all ifTable entries), additionally aggregation group index values available.

Bridge Interface Index.

The PVID of port. Taken if no other rule given for VLAN association. If aggregated: only for group.

The maximum number of hosts allowed. Aggregation group available. Value 0 is allowed. Default value is -1: it means unlimited.

The number hosts which is allowed to be used. Aggregation group available.

Limit maximum number of MAC addresses learning newly per unit time(one second) on a port. (0: nothing learned, -l: unlimited.)

The default permission for mac filtering. Valid only for physical ports, use values from MFDB Table. Enumeration: 'deny': 0, 'permit': 1.

Mirroring on ingress packets. Valid only for physical ports. Enumeration: 'enable': 1, 'disable': 0.

Mirroring on egress packets. Valid only for physical ports. Enumeration: 'enable': 1, 'disable': 0.

Broadcast packet rate limit(unit: packets/s), Valid only for physical ports. Default value is 0: it means BCSC clear-state. Value Range: 0-262142(TX/FX),0-2097150(GBIC).

Multicast packet rate limit.(unit: packets/s), Valid only for physical ports. Default value is 0: it means BCSC clear-state. Value Range: 0-262142(TX/FX),0-2097150(GBIC).

DLF packet rate limit(unit: packets/s), Valid only for physical ports. Default value is 0: it means BCSC clear-state. Value Range: 0-262142(TX/FX),0-2097150(GBIC).

QinQ Status of the port. Valid only for physical ports. Enumeration: 'enable': 1, 'disable': 0.

The administrative link-type of port on the xSTP. Enumeration: 'shared': 0, 'automatic': 2, 'pointTopoint': 1.

The administrative edgemode of port on the xSTP. Enumeration: 'enable': 1, 'disable': 0.

The link-type of the port on the xSTP. Enumeration: 'shared': 0, 'pointTopoint': 1.

The edge-mode of the port on the xSTP. Enumeration: 'disabled': 0, 'enabled': 1.

The stp bpdu-filter of the port on the xSTP. Default value is 0. Enumeration: 'enable': 1, 'disable': 0.

Isolated status of this port. Default value is disable(0). Enumeration: 'enable': 1, 'disable': 0.

Portlist for promiscuous ports of this port. The OctetString is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.

DHCP filter server status 0: disabled 1: enabled Enumeration: 'enable': 1, 'disable': 0.

The adminStatus of loop-detect per ports. Enumeration: 'enable': 1, 'disable': 2.

The adminBlock mode of loop-detect per ports. Indicate whether block port or not. Enumeration: 'enable': 1, 'disable': 2.

The sending period of detection packet.

The Blocked list expire timer.

The operStauts of loop-detect per ports. Enumeration: 'unblock': 2, 'block': 1.

The netBios filter status per ports Enumeration: 'enable': 1, 'disable': 0.

The ingress port that push inner-tag Enumeration: 'enable': 1, 'disable': 0.

The egress port that pop inner-tag Enumeration: 'enable': 1, 'disable': 0.

The inner-tag value to push for incoming untagged packet

The port priority value for incoming untagged packet

Use inner-tags priority as outer-tags priority. Enumeration: 'enable': 1, 'disable': 0.

Use inner-tags vlan-id as outer-tags vlan-id. Enumeration: 'enable': 1, 'disable': 0.

The times of link-up event

The times of link-down event

The elapsed time after link is up.

The elapsed time after clearing statistics.

If enable, SLF packet is forwarded with mac-learning. Otherwise, SLF packet is forwarded without mac-learning. Enumeration: 'enable': 1, 'disable': 2.

Port Bridge Feature for transmitting the packet out on the same port of which is received. Enumeration: 'enable': 1, 'disable': 2.

Unknown multicast block setting for a port. Enumeration: 'enable': 1, 'disable': 2.

The port description.

The hold-time

The mac anti-spoofing per port.

Interface type. Enumeration: 'tunnel': 6, 'unknown': 255, 'vlan': 3, 'portChannel': 5, 'inner': 2, 'eth': 4, 'special': 1.

The interface mode to switched port or routed port. Enumeration: 'routedPort': 2, 'switchedPort': 1.

The switching mode of L2 interface. Enumeration: 'cn': 5, 'cnp': 8, 'pe': 7, 'hybrid': 2, 'cbp': 11, 'ce': 4, 'access': 1, 'vip': 9, 'invalid': 255, 'trunk': 3, 'pip': 10, 'pn': 6.

The switching sub mode of L2 interface. Enumeration: 'cn': 5, 'cnp': 8, 'pe': 7, 'hybrid': 2, 'cbp': 11, 'ce': 4, 'access': 1, 'vip': 9, 'invalid': 255, 'trunk': 3, 'pip': 10, 'pn': 6.

The default VLAN of L2 interface.

Set the ingress filtering for the received frames. Enumeration: 'enable': 1, 'disable': 2.

Set the Layer 2 interface acceptable frame types. This processing occurs after VLAN classification. vlan-tagged Accept only classified frames which belong to the port's member set. Hybridge interface only. Bits: 'untagged': 2, 'tagged': 1, 'allType': 0.

The native VLAN is used for classifying the incoming untagged packets.

Both tagged and untagged frames will be classified over interfaces.

egress Port string

Indicate whether port is aggregator or aggregated(member). Enumeration: 'aggregator': 1, 'none': 0, 'aggregated': 2.

Static channel group name

Channel group hash method. Enumeration: 'srcDstIp': 6, 'srcDstPort': 9, 'dstIp': 5, 'srcMac': 2, 'srcPort': 7, 'dstMac': 1, 'srcIp': 4, 'dstPort': 8, 'srcDstMac': 3.

aggregate type Enumeration: 'aggregatedStatic': 1, 'aggregatorLacp': 4, 'noneAggregated': 0, 'aggregatorStatic': 3, 'aggregatedLacp': 2.

aggregate ID

aggregate mode Enumeration: 'noneAggregated': 0, 'aggregatedActive': 1, 'aggregatedPassive': 2.

The sending period of detection packet. (Unit: milliseconds)

The looping Admin count of LoopDetect

The looping oper count of LoopDetect compared with adminCount

The looping accumulated detected count of LoopDetect

The loop detect vlan. (0: Not Set)

The maximum number of New hosts allowed. Aggregation group available. Default value is 0: it means unlimited.

STP status per interface. Enumeration: 'enable': 1, 'disable': 0.

The Spanning-tree bpduguard state Enumeration: 'enable': 1, 'disable': 0.

The Ethertype for outer-tag

The Mirror monitor status Enumeration: 'enable': 1, 'disable': 0.

The bandwidth value for interface.

The alias name for interface.

The interface supports multicast. Enumeration: 'enable': 1, 'disable': 0.

Packet flooding discarding. Bits: 'bcast': 0, 'dlf': 1, 'mcast': 2.

setBridgePortPVid: sleBridgePortControlIndex sleBridgePortControlPVid setBridgePortMaxHosts: sleBridgePortControlIndex sleBridgePortControlMaxHosts setBridgePortMACFilterPermission: sleBridgePortControlIndex sleBridgePortControlMACFilterPermission setBridgePortMirrorProfile: sleBridgePortControlIndex sleBridgePortControlIngMirrorStatus sleBridgePortControlEgMirrorStatus setBridgePortBcscThresholdProfile: sleBridgePortControlIndex sleBridgePortControlBcastThreshold sleBridgePortControlMcastThreshold sleBridgePortControlDlfThreshold setBridgePortQinQStatus: sleBridgePortControlIndex sleBridgePortControlQinQStatus setBridgePortLinktype: sleBridgePortControlIndex sleBridgePortControlAdminLinktype setBridgePortEdgemode: sleBridgePortControlIndex sleBridgePortControlAdminEdgemode setBridgePortNetBIOSFilter: sleBridgePortControlIndex sleBridgePortControlNetBIOSFilter Enumeration: 'unsetBridgePortAlias': 83, 'setBridgePortSwitchRemoveAllowdVlan': 35, 'setBridgePortSwitchNativeVlan': 32, 'setBridgePortSwitchDefaultVlan': 31, 'setBridgePortLoopDetectPeriodMs': 71, 'setBridgePortPortBridgeStatus': 24, 'setBridgePortMaxHosts': 2, 'setBridgePortDhcpFilterServer': 13, 'setBridgePortStpBpduGuardErrRcv': 12, 'setBridgePortInner2outerVid': 22, 'setBridgePortMacLearningStatus': 23, 'setBridgePortBcscThresholdProfile': 6, 'setBridgePortMaxLearnPerUnit': 3, 'clearBridgePortLinkUpCntAll': 39, 'setBridgeLoopDetectVlan': 73, 'setBridgePortOuterTpid': 79, 'setBridgePortNetBIOSFilter': 16, 'setBridgePortAlias': 82, 'setBridgePortPushInnertag': 17, 'setBridgePortSwitchStaticChannel': 36, 'setBridgePortSwitchStatus': 29, 'setBridgePortSwitchNoChannelProfile': 41, 'setBridgePortPriority': 20, 'setBridgePortStpStatus': 77, 'setBridgePortIsolatedStatus': 11, 'setBridgePortMACFilterPermission': 4, 'setBridgePortSwitchAddAllowdVlan': 34, 'setBridgePortInner2outerPri': 21, 'setBridgePortUnknownMcastBlock': 25, 'setBridgePortQinQStatus': 7, 'setBridgePortLinktype': 8, 'setBridgePortSwitchMode': 30, 'setBridgePortSwitchChannelLoadbalance': 37, 'setBridgePortDescriptopn': 26, 'setBridgePortSwitchAccFramType': 33, 'setBridgePortMirrorMonitor': 80, 'setBridgeLoopDetectAdminCount': 72, 'setBridgePortPopInnertag': 18, 'clearSpanningTreeDetectedProtocols': 76, 'setBridgePortStpBpduFilter': 10, 'setBridgePortBandwidth': 81, 'setBridgePortLoopDetectUnblock': 15, 'setBridgePortHoldTime': 27, 'setBridgePortStpBpduGuard': 78, 'setBridgePortPVid': 1, 'setBridgePortEdgemode': 9, 'setBridgePortMacAntiSpoofing': 28, 'delBridgeLoopDetectVlan': 74, 'setBridgePortFloodBlock': 85, 'clearBridgePortLinkUpCntByIndex': 38, 'setBridgePortMirrorProfile': 5, 'setBridgePortMulticast': 84, 'setBridgePortInnertag': 19, 'setBridgePortLoopDetectProfile': 14, 'setBridgePortMaxNewHosts': 75, 'setBridgePortSwitchChannelProfile': 40.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

sleBridgePortIndex

The PVID of port. Taken if no other rule given for VLAN association. If aggregated: only for group.

The maximum number of hosts allowed. Aggregation group available. Value 0 is allowed, Value -1 is used to clear.

Limit maximum number of MAC addresses learning newly per unit time(one second) on a port. (0: nothing learned, -l: unlimited.)

The default permission for mac filtering. Valid only for physical ports, use values from MFDB Table. Enumeration: 'deny': 0, 'permit': 1.

Mirroring on ingress packets. Valid only for physical ports. Enumeration: 'enable': 1, 'disable': 0.

Mirroring on egress packets. Valid only for physical ports. Enumeration: 'enable': 1, 'disable': 0.

Broadcast packet rate limit (unit: packets/s), Valid only for physical ports. Value 0 is used to clear. Value Range: 0-262142(TX/FX),0-2097150(GBIC).

Multicast packet rate limit (unit: packets/s), Valid only for physical ports. Value 0 is used to clear. Value Range: 0-262142(TX/FX),0-2097150(GBIC).

DLF packet rate limit (unit: packets/s), Valid only for physical ports. Value 0 is used to clear. Value Range: 0-262142(TX/FX),0-2097150(GBIC).

QinQ Status of the port. Valid only for physical ports. Enumeration: 'enable': 1, 'disable': 0.

The administrative link-type of port on the xSTP. Enumeration: 'shared': 0, 'automatic': 2, 'pointTopoint': 1.

The administrative edgemode of port on the xSTP. Enumeration: 'enable': 1, 'disable': 0.

The stp bpdu-filter of the port on the xSTP. Default value is 0. Enumeration: 'enable': 1, 'disable': 0.

Isolated status of this port. Default value is disable(0). Enumeration: 'enable': 1, 'disable': 0.

Portlist for promiscuous ports of this port. The OctetString is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.

Trigger manual recovery for the port disabled by Bpdu Guard. false : sustain current state. true : trigger recovery.

DHCP filter server status 0: disabled 1: enabled Enumeration: 'enable': 1, 'disable': 0.

The adminStatus of loop-detect per ports. Enumeration: 'enable': 1, 'disable': 2.

The adminBlock mode of loop-detect per ports. Indicate whether block port or not. Enumeration: 'enable': 1, 'disable': 2.

The sending period of detection packet.

The Blocked list expire timer.

The netBios filter status per ports Enumeration: 'enable': 1, 'disable': 0.

Push inner-tag for incoming untagged packet. Enumeration: 'enable': 1, 'disable': 0.

Pop inner-tag for double tagged packet. Enumeration: 'enable': 1, 'disable': 0.

Inner-tag value to push for incoming untagged packet.

The priority value per port. Assign priority for untagged packet from port.

If enable, use inner-tag's priority as outer-tag's priority. Otherwise, use outer-tag's priority Enumeration: 'enable': 1, 'disable': 0.

If enable, use inner-tag's vlan-id as outer-tag's vlan-id. Otherwise, use outer-tag's vlan-id Enumeration: 'enable': 1, 'disable': 0.

If enable, SLF packet is forwarded with mac-learning. Otherwise, SLF packet is forwarded without mac-learning. Enumeration: 'enable': 1, 'disable': 2.

Port Bridge Feature for transmitting the packet out on the same port of which is received. Enumeration: 'enable': 1, 'disable': 2.

Unknown multicast block setting for a port. Enumeration: 'enable': 1, 'disable': 2.

The Port Description.

The hold-time

The mac anti-spoofing per port. Enumeration: 'false': 2, 'true': 1.

The interface mode to switched port or routed port. Enumeration: 'routedPort': 2, 'switchedPort': 1.

The switching mode of L2 interface. Enumeration: 'cn': 5, 'cnp': 8, 'pe': 7, 'hybrid': 2, 'cbp': 11, 'ce': 4, 'access': 1, 'vip': 9, 'invalid': 255, 'trunk': 3, 'pip': 10, 'pn': 6.

The switching sub mode of L2 interface. Enumeration: 'cn': 5, 'cnp': 8, 'pe': 7, 'hybrid': 2, 'cbp': 11, 'ce': 4, 'access': 1, 'vip': 9, 'invalid': 255, 'trunk': 3, 'pip': 10, 'pn': 6.

The dafulat VLAN of L2 interface

Set the ingress filtering for the received frames Enumeration: 'enable': 1, 'disable': 2.

Set the Layer 2 interface acceptable frame types. This processing occurs after VLAN classification. vlan-tagged Accept only classified frames which belong to the port's member set. Hybridge interface only. Bits: 'unTagged': 2, 'tagged': 1, 'allType': 0.

The native VLAN is used for classifying the incoming untagged packets.

Both tagged and untagged frames will be classified over interfaces.

egress Port string

Static channel group name

Channel group hash method. Enumeration: 'srcDstIp': 6, 'srcDstPort': 9, 'dstIp': 5, 'srcMac': 2, 'srcPort': 7, 'dstMac': 1, 'srcIp': 4, 'dstPort': 8, 'srcDstMac': 3.

aggregate type Enumeration: 'aggregatedStatic': 1, 'aggregatorLacp': 4, 'noneAggregated': 0, 'aggregatorStatic': 3, 'aggregatedLacp': 2.

Description.

Description. Enumeration: 'noneAggregated': 0, 'aggregatedActive': 1, 'aggregatedPassive': 2.

The sending period of detection packet (Unit: milliseconds).

The looping count of LoopDetect

The loop detect vlan

The maximum number of hosts allowed. Aggregation group available. Value 0 is allowed. Default value is -1: it means unlimited.

STP status per interface. Enumeration: 'enable': 1, 'disable': 0.

The Spanning-tree bpduguard state Enumeration: 'enable': 1, 'disable': 0.

The Ethertype for outer-tag

The Mirror monitor status Enumeration: 'enable': 1, 'disable': 0.

The bandwidth value for interface.

The alias name for interface.

The interface supports multicast. Enumeration: 'enable': 1, 'disable': 0.

Packet flooding discarding. Bits: 'bcast': 0, 'dlf': 1, 'mcast': 2.

PVid changed

MaxHosts changed

Description.

MAC filter permission changed

Mirror profile changed

BCSC threshold profile changed

QinQ status changed

Admin link-type changed

Admin edge-mode changed

Description.

Description.

Description.

Description.

Description.

Description.

Description.

setBridgePortPushInnertag

setBridgePortPopInnertag

setBridgePortInnertag

setBridgePortPriority

setBridgePortInner2outerPri

setBridgePortInner2outerVid

sleBridgePortMACLearningStatus

sleBridgePortPortBridgeStatus

Description.

Description.

Description.

setBridgePortMacAntiSpoofing

setBridgePortSwitchStatus

setBridgePortSwitchMode

setBridgePortSwitchDefaultVlan

setBridgePortSwitchNativeVlan

setBridgePortSwitchAccFramType

setBridgePortSwitchAddAllowdVlan

setBridgePortSwitchRemoveAllowdVlan

setBridgePortSwitchStaticChannel

setBridgePortSwitchChannelLoadbalance

Description.

setBridgePortSwitchChannelProfile

setBridgePortSwitchNoChannelProfile

Description.

Description.

setBridgeLoopDetectVlan

delBridgeLoopDetectVlan

setBridgePortMaxNewHosts

clearSpanningTreeDetectedProtocols

setBridgePortStpStatus

setBridgePortStpBpduGuard

setBridgePortOuterTpid

setBridgePortMirrorMonitor

setBridgePortBandwidth

Description.

Description.

Description.

Description.

sle vlan table

key: sleVlanIndex

A vlan-identifier.

Same as ifIndex (for appropriated ifTable entries).

A descriptional name for that vlan.

static, in future gvrp Enumeration: 'dynamic': 2, 'static': 1.

Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sleBridgePortIndex. The least significant byte is the second octet.

Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sleBridgePortIndex. The least significant byte is the second octet.

Only useful in case of gvrp.

The ageing time per vlan

The VLAN tag tx counter.

createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision

Indicate whether E-line service enable or not Enumeration: 'enable': 1, 'disable': 0.

The Vlan operation status. Enumeration: 'active': 2, 'inactive': 1, 'invalid': 0.

The Vlan MTU.

The Vlan service either customer or service. Enumeration: 'customer': 1, 'service': 2.

createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision destroyVlan: sleVlanControlIndex setVlanPortProfile: sleVlanControlIndex sleVlanControlEgressPorts sleVlanControlUnTaggedPorts setVlanMulticastPermission: sleVlanControlIndex sleVlanControlMulticastPermission Enumeration: 'setVlanMt': 9, 'setVlanServiceOperStatus': 10, 'setVlanDesc': 6, 'createVlan': 1, 'destroyVlan': 2, 'setVlanPortProfile': 3, 'setVlanOperStatus': 8, 'setVlanAgeingTime': 4, 'createElineVlan': 7, 'createVlanRange': 5.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

Vlan's ID

Vlan's name.

Portlist for all member of this VLAN, they will send tagged or untagged frames. The OctetString is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.

Portlist for members of this Vlan they will send only untagged frames. The OctetString is a list of pairs of octets each identify an sleBridgePortIndex. The least significant byte is the second octet.

The ageing time per vlan (supported only model 5924N)

Vlan's ID

createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision

Indicate whether E-line service enable or not Enumeration: 'enable': 1, 'disable': 0.

The Vlan operation status. Enumeration: 'active': 2, 'inactive': 1, 'invalid': 0.

The Vlan MTU.

The Vlan service type. Enumeration: 'customer': 1, 'service': 2.

The Vlan service type. Enumeration: 'rootedToMultipoint': 3, 'pointToPoint': 1, 'multipointToMultipoint': 2.

Description.

Description.

Description.

setVlanDesc

createElineVlan

setVlanOperStatus

sleVlanMtuChanged

sle vlan table

key: sleVlanIndex

A vlan-identifier.

A descriptional name for that vlan.

createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision

The Vlan operation status. Enumeration: 'active': 2, 'inactive': 1, 'invalid': 0.

The Vlan MTU.

static, in future gvrp Enumeration: 'dynamic': 2, 'static': 1.

The Vlan service either customer or service. Enumeration: 'customer': 1, 'service': 2.

The Vlan service type. Enumeration: 'rootedToMultipoint': 3, 'pointToPoint': 1, 'multipointToMultipoint': 2.

vlan map table.

key: sleVlanIndex

Index of the used Filtering Table entry.

Index of the used STP instance.

Index of the used Erp Domain.

setVlanMapFid: sleVlanMapControlIndex sleVlanMapFid setVlanMapStpId: sleVlanMapControlIndex sleVlanMapStpId setVlanMapErpDomainId: sleVlanMapControlIndex sleVlanMapErpDomainId Enumeration: 'setVlanMapErpDomainId': 3, 'setVlanMapStpId': 2, 'setVlanMapFid': 1.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

vlan map index.

FDB identifier

STP Instance Identifier

The Erp Domain ID.

The operation mode of running the STP at the switch. Enumeration: 'rstp': 1, 'mstp': 3, 'pvstp': 4, 'pvrstp': 5, 'stp': 0, 'pvstpPlus': 7, 'pvrstpPlus': 6.

The MST configuration format selector.

The MST configuration name of at most 32 characters.

The MST configuration revision.

The STP bridge forward delay.

The STP bridge hello time.

The STP bridge max age.

The MST bridge max hops.

The MST CST root identifier.

The MST CST root path cost.

Indicates the mode of Bpdu Guard Feature on the switch. When the system with Bpdu Guard enabled receives a BPDU from any port, that port is immediately disabled. disable -- the Bpdu Guard feature is disabled on this switch. enable -- the Bpdu Guard feature is enabled on this switch. Whether the Bpdu Guard feature is enabled or not on this switch depends on the object value of sleStpControlBpduGuardMode. Enumeration: 'enable': 1, 'disable': 0.

Indicates the automatic recovery mode for the ports disabled by Bpdu Guard. disable -- the Bpdu Guard Auto Recovery feature is disabled on this switch. enable -- the Bpdu Guard Auto Recovery feature is enabled on this switch. Whether the Bpdu Guard Auto Recovery feature is enabled or not on this switch depends on the object value of sleStpControlBpduGuardAutoRcvMode. Enumeration: 'enable': 1, 'disable': 0.

Indicates the automatic recovery time for the ports disabled by Bpdu Guard. Unit: second The Bpdu Guard Auto Recovery time depends on the object value of sleStpControlBpduGuardAutoRcvTime.

setStpOperationMode: sleStpControlOperationMode setStpConfigureProfile: sleStpControlConfigureName sleStpControlRevisionLevel setStpTimerProfile sleStpControlFwdDelay sleStpControlHelloTime sleStpControlMaxAge sleStpControlMaxHops Enumeration: 'setStpBpduGuardProfile': 4, 'setStpConfigureProfile': 2, 'setStpOperationMode': 1, 'setStpTimerProfile': 3.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

The operation mode of running the STP at the switch. Enumeration: 'rstp': 1, 'mstp': 3, 'pvstp': 4, 'pvrstp': 5, 'stp': 0, 'pvstpPlus': 7, 'pvrstpPlus': 6.

The MST configuration name of at most 32 characters.

The MST configuration revision.

The STP bridge forward delay.

The STP bridge hello time.

The STP bridge max age.

The MST bridge max hops.

Configures the mode of Bpdu Guard Feature on the switch. When the system with Bpdu Guard enabled receives a BPDU from any port, that port is immediately disabled. disable -- the Bpdu Guard feature is disabled on this switch. enable -- the Bpdu Guard feature is enabled on this switch. Enumeration: 'enable': 1, 'disable': 0.

Configures the automatic recovery mode for the ports disabled by Bpdu Guard. disable -- the Bpdu Guard Auto Recovery feature is disabled on this switch. enable -- the Bpdu Guard Auto Recovery feature is enabled on this switch. Enumeration: 'enable': 1, 'disable': 0.

Configures the automatic recovery time for the ports disabled by Bpdu Guard. Unit: second

STP instance table.

key: sleStpInstanceIndex

The STP instance ID.

The enabled/disabled status of the pvst. Enumeration: 'enable': 0, 'disable': 1.

The bridge priority.

The STP designated root bridge identifier in a specific instance. Size: 8.

The STP root path cost in a specific instance.

TThe STP designated bridge identifier.

The STP designated port identifier.

The port number of the port which offers the lowest cost path from the this STP instance of this bridge to the root bridge.

The current forward delay of the STP Instance.

The current hello time of the STP Instance.

The current max age of the STP Instance.

The current remain hops of the MSTI or pvst.

The Setting forward delay of the STP Instance.

The current hello time of the STP Instance.

The Setting max age of the STP Instance.

createStpInstance: sleStpInstanceControlIndex sleStpInstanceControlEnable sleStpInstanceControlPriority sleStpInstanceControlBrFwdDelay sleStpInstanceControlBrHelloTime sleStpInstanceControlBrMaxAge destroyStpInstance: sleStpInstanceControlIndex setStpInstanceEnable: sleStpInstanceControlIndex sleStpInstanceControlEnable setStpInstanceConfigProfile: sleStpInstanceControlIndex sleStpInstanceControlPriority sleStpInstanceControlBrFwdDelay sleStpInstanceControlBrHelloTime sleStpInstanceControlBrMaxAge Enumeration: 'setStpInstanceConfigProfile': 2, 'setStpInstanceEnable': 1.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

sleStpInstanceIndex

The enabled/disabled status of the pvst. Enumeration: 'enable': 1, 'disable': 0.

The Setting bridge priority in a specific instance. This values are matched specific values in CLI. sleStpInstanceControlPriority X 4096 is equal to priority value in CLI. (ex. 2 in SNMP means 8192 in CLI)

The Setting forward delay of the MSTI or pvst.

The current hello time of the MSTI or pvst.

The Setting max age of the MSTI or pvst.

STP instance port table

key: sleStpInstanceIndex, sleStpInstancePortIndex

The Port ID.

The STP port path cost.

The STP port priority.

The current STP Role of the Port. Enumeration: 'backup': 5, 'alternate': 4, 'designated': 1, 'disable': 0, 'master': 3, 'root': 2.

The STP forwarding state of a specific port. Enumeration: 'disabled': 0, 'forwarding': 3, 'learning': 2, 'listening': 1, 'blocking': 4.

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.

The path cost of the Designated Port of the segment connected to this port.

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

The Port Identifier of the port on the Designated Bridge for this port's segment.

An indication of whether the RootGuard capability is enabled on this port or not. This configuration will be applied to the VLAN or MSTP instance in which this port exists. Whether the RootGuard capability is enabled or not on this switch depends on the object value of sleStpInstancePortControlRootGuardMode. Enumeration: 'enable': 1, 'disable': 0.

setStpInstancePortProfile: sleStpInstancePortControlIndex sleStpInstancePortControlInstanceId sleStpInstancePortControlPathcost sleStpInstancePortControlPriority Enumeration: 'setStpInstancePortProfile': 1.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

sleStpInstancePortIndex

sleStpInstanceId

The path cost of the Designated Port of the segment connected to this port.

The STP port priority.

Enable or disable RootGuard capability on this port. This configuration will be applied to the VLAN or MSTP instance in which this port exists. Enumeration: 'enable': 1, 'disable': 0.

subnet vlan table.

key: sleSubnetVlanIp, sleSubnetVlanMask

Ip address of Subnet

Mask bit.

Index of the VLAN.

createSubnetVlan: sleSubnetVlanControlPortIndex sleSubnetVlanControlIp sleSubnetVlanControlMask sleSubnetVlanControlVid destorySubnetVlan: sleSubnetVlanControlPortIndex Enumeration: 'createSubnetVlan': 1, 'destorySubnetVlan': 2.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

IP address

Mask bit

Vlan's ID

protocol vlan table.

key: sleBridgePortIndex, sleProtocolVlanEtype

Ethernet type

Index of the VLAN.

createProtocolVlan: sleProtocolVlanControlPortIndex sleProtocolVlanControlEtype sleProtocolVlanControlVid destoryProtocolVlan: sleProtocolVlanControlPortIndex Enumeration: 'destoryProtocolVlan': 2, 'createProtocolVlan': 1.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

sleBridgePortIndex, sleProtocolVlanEtype

Ethernet Type

sleProtocolVlanControlVid

lag table.

key: sleLagIndex

This value assigned to the aggregation ID.

Port ID of aggregation.

This value assigned to the distributing mode of link aggregation. Enumeration: 'srcdstip': 6, 'none': 0, 'dstip': 5, 'srcmac': 1, 'dstmac': 2, 'label': 80, 'srcip': 4, 'srcdstl4': 7, 'srcdstmac': 3.

The value assigned to the port list of the aggregation.

The operation mode of link aggregation. Enumeration: 'lacp': 2, 'inactive': 0, 'trunk': 1.

Description.

The MIB object for the user command.. Enumeration: 'setLagProfile': 1, 'setLagProfileActiveLink': 2.

Describes the status of a user command group, used for block commands while a command execution in process.

Maximum command duration time in case of long running

Command result attribute

Time stamp attribute set at end of command.

This value assigned to the aggregation ID.

This value assigned to the distributing mode of link aggregation. Enumeration: 'srcdstip': 6, 'dstip': 5, 'srcmac': 1, 'dstmac': 2, 'label': 80, 'srcip': 4, 'srcdstl4': 7, 'srcdstmac': 3.

Port ID of aggregation.

The operation mode of link aggregation. Enumeration: 'lacp': 2, 'trunk': 1.

Description.

lag LACP table.

key: sleLagLacpIndex

Location of authentication.

The kind of authentication.

The Actors System ID, encoded as a MAC address.

Enable or disable the corresponding authen method.

The primary priority of the corresponding authen method.

The received LACP PDUs

The received LACP PDUs

The sent LACP PDUs

The sent LACP PDUs error

The received LACP Marker

The sent LACP Marker

The sent LACP Marker error.

The request of a user command Enumeration: 'clearLacpStats': 1.

The status of user command

The maximum time for the manager for a long running user command

The time stamp of the last command(end of command)

The result of the last user command

Description.

lag LACP port table.

key: sleLagLacpPortIndex

The IP address of the RADIUS server referred to in this table entry.

show lacp activity of port Enumeration: 'enable': 1, 'disable': 0.

The priority assigned to the port by Actor.

The aggregator index.

The administrable Key value assigned to the port by the Actor.

The Actor's administrable state variables for the port. Bits: 'collecting': 3, 'lacpActivity': 7, 'aggregation': 5, 'synchronization': 4, 'destributing': 2, 'defaulted': 1, 'lacpTimeout': 6, 'expired': 0.

The operational Key value assigned to the port by the Actor.

The Actor's operational state variables for the port. Bits: 'collecting': 3, 'lacpActivity': 7, 'lacpTmeout': 6, 'aggregation': 5, 'synchronization': 4, 'destributing': 2, 'defaulted': 1, 'expired': 0.

The Partner's Administrable System ID, encoded as a MAC address.

The administrable priority assigned to the Partner System.

The administrable Key value assigned to the port by the Partner.

The administrable number value assigned to the port by the Partner.

The administrable priority assigned to this port by the Partner.

The administrable state assigned to this port by the Partner. Bits: 'collecting': 3, 'lacpActivity': 7, 'lacpTmeout': 6, 'aggregation': 5, 'synchronization': 4, 'destributing': 2, 'defaulted': 1, 'expired': 0.

The Partner's operational System ID, encoded as a MAC address.

The operational priority assigned to the Partner System.

The operational Key value assigned to the port by the Partner.

The operational number value assigned to the port by the Partner.

The operational priority assigned to this port by the Partner.

The operational state assigned to this port by the Partner. Bits: 'collecting': 3, 'lacpActivity': 7, 'aggregation': 5, 'synchronization': 4, 'destributing': 2, 'defaulted': 1, 'lacpTimeout': 6, 'expired': 0.

Admin aggregator Id.

The MIB object for the user command. Enumeration: 'setLagLacpPortProfile': 1, 'setLagLacpPortProfileWithAggr': 2.

Describes the status of a user command group, used for block commands while a command execution in process.

Maximum command duration time in case of long running

Time stamp attribute set at end of command.

Command result attribute.

The IP address of the RADIUS server referred to in this table entry.

show lacp activity of port Enumeration: 'enable': 1, 'disable': 0.

set LACP_Activity in sleLagLacpPortActorAdminState Enumeration: 'active': 1, 'passive': 2.

The administrable Key value assigned to the port by the Actor.

set Aggregation in sleLagLacpPortActorAdminState. Enumeration: 'aggregatable': 1, 'individual': 2.

The priority assigned to the port by Actor.

set LACP_Timeout in sleLagLacpPortActorAdminState. Enumeration: 'short': 1, 'long': 2.

Admin aggregator Id.

The table of FDB entries.

The table entry of FDB table. key: sleFdbEntryFid, sleFdbEntryPort, sleFdbEntryMacAddress

FDB identify.

The port number of the port on which a frame having a source address equal to the value of the corresponding instance of dasanFdbAddress has been seen.

A unicast MAC address for which the device has forwarding or filtering information.

VLAN ID.

FDB Entry's mode. The status of this entry. The meanings of the values are: local(0) - the value of the corresponding instance of sleFdbMacAddress was own. static(1) - the value of the corresponding instance of sleFdbMacAddress was specified by management. dynamic(2) - the value of the corresponding instance of sleFdbMacAddress was learned. Enumeration: 'static': 1, 'local': 0, 'dynamic': 2.

The permission of dasanFdbAddress. The meanings of the values are: deny(0) - the value of the corresponding instance of dasanFdbAddress will be dropped. permit(1) - the value of the corresponding instance of dasanFdbAddress will be flooded. Enumeration: 'deny': 0, 'permit': 1.

Elapsed time after registered

Control Request. Enumeration: 'clearFdbTableEntries': 3, 'destoryFdbEntry': 2, 'createFdbEntry': 1.

Control Status.

Cotrol Timer.

The time stamp of the last command(end of command)

The result of the last user command

FDB identifier.

The port number of FDB entry. 0 : any (all) port.

MAC address of FDB entry.

Created FDB Entry.

Destroyed FDB Entry.

clearFdbTableEntries. In this notification PDU, key of sleFdbEntryPort is fid.port.6.0.0.0.0.0.0. If port is 0, is cleared on all ports in fid.

The table of MFDB entries.

Information about a specific MAC address that should be forwarding or dropping. key: sleMfdbMacAddress

A unicast MAC address for which the device has forwarding or filtering information.

The permission of sleMFdbMacAddress. The meanings of the values are: deny(0) - the value of the corresponding instance of sleMfdbMacAddress will be dropped. permit(1) - the value of the corresponding instance of sleMfdbMacAddress will be flooded. Enumeration: 'deny': 0, 'permit': 1.

vlan index

Port Map

The request of a user command Enumeration: 'destoryMfdbEntry': 2, 'createMfdbEntry': 1, 'clearMfdbEntryTable': 4, 'setMfdbEntryPermission': 3.

The status of user command

The maximum time for the manager for a long running user command

The time stamp of the last command(end of command)

The result of the last user command

A unicast MAC address for which the device has forwarding or filtering information. If MAC address is NULL apply mac-filter list from file '/etc/mfdb.conf'.

The permission of sleMFdbControlMacAddress. Enumeration: 'deny': 0, 'permit': 1.

vlan index The value of 0 is all vlan

Port Map The value of 0x00 is all port

Create new MFDB entry.

Destroyed MFDB entry.

Changed permission of MFDB entry.

Description.

IGMP configuration table.

key: sleVlanIndex

sleVlanIndex in sleVlanTable

If this flag is true, IGMP multicasting is enabled. (not supported) Enumeration: 'enable': 1, 'disable': 0.

If this flag is true, mac address that is unregistered into IGMP table is filtered. (not supported) Enumeration: 'enable': 1, 'disable': 0.

Configures outmost VLAN. (not supported) Enumeration: 'enable': 1, 'disable': 0.

The IGMP snooping enable/disable flag Enumeration: 'enable': 1, 'disable': 0.

After join message is received, the time interval until be registered into multicast group. (not supported)

After query message is send, the time interval for response waiting.

The index of interface connected with multicast router.

If this flag is true, immediately this entry is deleted, when leave message is received, Enumeration: 'enable': 1, 'disable': 0.

If this flag is true, perform IGMP snooping querier. Enumeration: 'enable': 1, 'disable': 0.

The request of a user command

The status of user command

The maximum time for the manager for a long running user command

The time stamp of the last command(end of command)

The result of the last user command

sleVlanIndex in sleVlanTable

If this flag is true, IGMP multicasting is enabled. Enumeration: 'enable': 1, 'disable': 0.

If this flag is true, mac address that is unregistered into IGMP table is filtered. Enumeration: 'enable': 1, 'disable': 0.

Configures outmost VLAN. (not supported) Enumeration: 'enable': 1, 'disable': 0.

The IGMP snooping enable/disable flag Enumeration: 'enable': 1, 'disable': 0.

After join message is received, the time interval until be registered into multicast group. (not supported)

After query message is send, the time interval for response waiting.

The index of interface connected with multicast router.

If this flag is true, immediately this entry is deleted, when leave message is received, Enumeration: 'enable': 1, 'disable': 0.

If this flag is true, perform IGMP snooping querier. Enumeration: 'enable': 1, 'disable': 0.

Description.

IGMP multicast table.

key: sleVlanIndex, sleIgmpMcastIPAddress, sleIgmpMcastPortIndex

sleVlanIndex in sleVlanTable

The IP multicast group address for which this entry contains information.

Port index

indicate either static- or dynamic- IP multicast group address Enumeration: 'dynamic': 1, 'static': 0.

Expiry time of this dynamic multicast table entry.

The request of a user command

The status of user command

The maximum time for the manager for a long running user command

The time stamp of the last command(end of command)

The result of the last user command

sleVlanIndex in sleVlanTable

The multicast group address.

Port index

Count of IGMP Group entry.

Count of IGMP Snooping Group entry.

The count of Mroute Joined channel

Information table of stack master/slave devices.

Information table entry of stack master/slave devices. key: sleStackDeviceMacAddress

MAC address of stack device.

Index stack device nodes.

Description of stack device.

Stack status of device. Enumeration: 'slave': 2, 'master': 1.

Stack status of stack device. Enumeration: 'active': 1, 'inactive': 0.

Device type of stack device.

Hostname of stack device.

Number of stack device's ports.

The request of a user command Enumeration: 'createStackSlaveDevice': 1, 'destoryStackSlaveDevice': 2.

The status of user command

The maximum time for the manager for a long running user command

The time stamp of the last command(end of command)

The result of the last user command

MAC address of slave device.

Description of stack slave device.

Added stack slave device to master stack device.

Deleted stack slave device from master stack device.

erp domain table.

key: sleErpDomainIndex

An index value that uniquely identifies an ERP domain.

Domain name.

Interface index that represents the primary port of the domain.

Interface index that represents the secondary port of the domain.

Mode that the ERP domain may operate in. Enumeration: 'normalNode': 0, 'rmNode': 1.

Protection activation. Enumeration: 'deactivated': 0, 'activated': 1.

Operator Request. Enumeration: 'clear': 0, 'manualToSecondary': 1.

Time in seconds taken to verify that ring integrity is restored.

Time in mili seconds between consecutive transmissions of test packages.

Time in mili seconds during which learning is disabled after a FDB flash.

Node status. Enumeration: 'preForward': 6, 'backoff': 9, 'deactivated': 8, 'failedP': 5, 'isolated': 7, 'failedS': 4, 'idle': 3, 'primaryProtecting': 1, 'protecting': 2, 'rmidle': 0.

Actual protection state on the ring. Enumeration: 'protecting': 1, 'unknown': 2, 'normal': 0.

Loss of Test Packet alarm status. Only meaningful in RM node. Enumeration: 'clear': 0, 'raised': 1.

Unidirectional Detection of Loss of Test Packet alarm status. Only meaningful in RM node. Enumeration: 'clear': 0, 'raised': 1.

Multiple Redundancy Manager alarm status. Only meaningful in RM node. Enumeration: 'clear': 0, 'raised': 1.

RM Node reacheability alarm status. Only meaningful in normal node. Enumeration: 'clear': 0, 'raised': 1.

The hold off time.

The ring priority

createErpDomain: sleErpDomainControlIndex sleErpDomainControlName sleErpDomainControlPrimaryPort sleErpDomainControlSecondaryPort sleErpDomainControlBridgeRole sleErpDomainControlProtectionActivation sleErpDomainControlOperatorRequest sleErpDomainControlWaitToRestoreTime sleErpDomainControlTestPacketInterval sleErpDomainControlLearningDisabledTime destroyErpDomain: sleErpDomainControlIndex setErpDomainProfile: sleErpDomainControlIndex sleErpDomainControlName sleErpDomainControlPrimaryPort sleErpDomainControlSecondaryPort sleErpDomainControlBridgeRole sleErpDomainControlOperatorRequest sleErpDomainControlWaitToRestoreTime sleErpDomainControlTestPacketInterval sleErpDomainControlLearningDisabledTime setErpProtectionActivation: sleErpDomainControlIndex sleErpDomainControlProtectionActivation Enumeration: 'setErpRingPriority': 6, 'setErpProtectionActivation': 4, 'setErpTrap': 7, 'setErpDomainProfile': 3, 'createErpDomain': 1, 'destroyErpDomain': 2, 'setErpHoldOffTime': 5.

The status of a user command.

The maximum wait time for the manager for a long running user command.

The time stamp of the last command (end of command).

The result of the last user command.

An index value that uniquely identifies an ERP domain.

Domain name.

Interface index that represents the primary port of the domain.

Interface index that represents the secondary port of the domain.

Mode that the ERP domain may operate in. Enumeration: 'normalNode': 0, 'rmNode': 1.

Protection activation. Enumeration: 'deactivated': 0, 'activated': 1.

Operator Request. Enumeration: 'clear': 0, 'manualToSecondary': 1.

Time in seconds taken to verify that ring integrity is restored.

Time in mili seconds between consecutive transmissions of test packages.

Time in mili seconds during which learning is disabled after a FDB flash.

The hold off time.

The ring priority

Loss of Test Packet alarm status. Only meaningful in RM node. Enumeration: 'clear': 0, 'raised': 1.

Unidirectional Detection of Loss of Test Packet alarm status. Only meaningful in RM node. Enumeration: 'clear': 0, 'raised': 1.