SL-XPDR-MIB: View SNMP OID List / Download MIB

VENDOR: PACKETLIGHT NETWORKS LTD.


 Home MIB: SL-XPDR-MIB
Download as:   
SNMPv2-CONF, SL-NE-MIB, IF-MIB, SNMPv2-SMI, PerfHist-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 slXpdr 1.3.6.1.4.1.4515.1.8
     slXpdrConn 1.3.6.1.4.1.4515.1.8.1
         xpdrConnConfigTable 1.3.6.1.4.1.4515.1.8.1.1
The connection table contains for each transponding connection a single bi-directional entry. The index to the table is the ifIndex of both XPDR interfaces. The ifType valued used for the index is: 196.
             xpdrConnConfigEntry 1.3.6.1.4.1.4515.1.8.1.1.1
An entry in the transponding connection table.
                 xpdrConnConfigIf1 1.3.6.1.4.1.4515.1.8.1.1.1.1
The first XPDR interface.
                 xpdrConnConfigIf2 1.3.6.1.4.1.4515.1.8.1.1.1.2
The second XPDR interface.
                 xpdrConnConfigRateControlAdmin 1.3.6.1.4.1.4515.1.8.1.1.1.3
This variable ask the rate of the traffic used by this interface. Frequency is in Kbp/s. The value 0-30 is used for rate control Bypass.
                 xpdrConnConfigRateControlOper 1.3.6.1.4.1.4515.1.8.1.1.1.4
This variable tells the rate of the traffic used by this interface. Frequency is in Kbp/s. The value 0 returned for rate control Bypass.
                 xpdrConnConfigLosPropagation 1.3.6.1.4.1.4515.1.8.1.1.1.5
This object is used to detrmine if the LOS propagation should be active.
                 xpdrServiceType 1.3.6.1.4.1.4515.1.8.1.1.1.6
The service type of the transponder.
                 xpdrConnAddMask 1.3.6.1.4.1.4515.1.8.1.1.1.7
This object is a bit mask relevant only for Muxponder entry. It contains a bit for each Muxponder service. To add a service the management should set the corresponding bit to 1. To remove a service the bit should be set to 0.
                 xpdrMuxInbandAdmin 1.3.6.1.4.1.4515.1.8.1.1.1.8
This object is relevant only for muxponder. up value means that the muxponder inband management is enabled.
                 xpdrMuxInbandOper 1.3.6.1.4.1.4515.1.8.1.1.1.9
The operational state of the inband interface.
                 xpdrDirection 1.3.6.1.4.1.4515.1.8.1.1.1.10
This object is used for unidirectional services. The upper port is the uplink as with the aps configuration. The transponder on one side should be configured as TX and the peer as RX.
         mpdrConnConfigTable 1.3.6.1.4.1.4515.1.8.1.2
The connection table contains entry for each service. All entries are bi-directional.
             mpdrConnConfigEntry 1.3.6.1.4.1.4515.1.8.1.2.1
An entry in the transponding connection table. There are three types of entries: 1. Add/Drop - a service that is locally dropped and added. 2. Bypass - a path that is bybassed via the node between the uplinks. 3. Unequipped - path that is not yet allocated for any service
                 mpdrConnConfigIf1 1.3.6.1.4.1.4515.1.8.1.2.1.1
The first MPDR interface. The ifIndex of the uplink path.
                 mpdrConnConfigIf2 1.3.6.1.4.1.4515.1.8.1.2.1.2
The second MPDR interface. - In the case of Bypass the value should be the path ifIndex of the other uplink. The bypass entry will be duplicated. Once for each uplink. - In the case of Unequipped the value is 0. The Unequipped entry will be duplicated for a ring. Once for each uplink. - In the case of Add/Drop the value is the ifIndex of the local service port. The Add/Drop entry will be duplicated in a case of a ring. Once for each uplink The default value is 0
                 mpdrConnConfigRateAdmin 1.3.6.1.4.1.4515.1.8.1.2.1.3
This variable ask the rate of the traffic used by this service. Bandwidth is in Kbp/s units. The value 0 is used for rate of Bypass or Unequipped services.
                 mpdrConnConfigLosPropagation 1.3.6.1.4.1.4515.1.8.1.2.1.4
This object is used to detrmine if the LOS propagation should be active.
                 mpdrServiceType 1.3.6.1.4.1.4515.1.8.1.2.1.5
The service type of the muxponder interface. In the case of Muxponder sevice the value is e.g gbE(6). In the case of Muxponder uplink the value is mux10GbE(43). In the case of Bypass or Unequipped the value should be other(11)
     slXpdrLastChange 1.3.6.1.4.1.4515.1.8.6
     slXpdrTraps 1.3.6.1.4.1.4515.1.8.7
         slXpdrTraps0 1.3.6.1.4.1.4515.1.8.7.0