SL-VCG-MIB: View SNMP OID List / Download MIB

VENDOR: PACKETLIGHT NETWORKS LTD.


 Home MIB: SL-VCG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SL-NE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vcgMIB 1.3.6.1.4.1.4515.1.1.10
The MIB module for the Vcat Group (VCG) Interface.
       vcgMIBObjects 1.3.6.1.4.1.4515.1.1.10.1
           vcgConfig 1.3.6.1.4.1.4515.1.1.10.1.1
               vcgStackStatusTable 1.3.6.1.4.1.4515.1.1.10.1.1.1
The table containing status information on the relationships between the VCG and STS sub-layers of network interfaces.
                   vcgStackStatusEntry 1.3.6.1.4.1.4515.1.1.10.1.1.1.1
Information on a particular relationship between two sub-layers, specifying that one sub-layer runs on top of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable. The rows in the table are created by the NMS. To apply the multiple changes done to the table, the NMS should set the corresponding object vcgLinkConfigStackChangesApply. Befor adding an entry to this table the corresponding VCG-if should already be exist in the vcgLinkConfigTable. When an entry is deleted from vcgLinkConfigTable, the corresponding entries with the same VCG-if should be deleted from the vcgStackStatusTable.
                       vcgStackLinkIndex 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.1
The value of the VCG link ifIndex corresponding to the higher-layer of the relationship. The structure of the VCG link ifIndex is: Slot=0, Port=trunk port number Type=219 Path=GID.
                       vcgStackStsIndex 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.2
The value of the STS ifIndex corresponding to the lower-layer of the relationship. The structure of the STS ifIndex is: Slot=0 Port=trunk port Type=50 Path=1st sts number in the sonet path.
                       vcgStackPathWidth 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.3
The width of the path
                       vcgStackSts1Mapping 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.4
aug1 ::au3(2) 3. Otherwise ::na(3)
                       vcgStackTxSequenceNumber 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.5
The tx sequence number of this path.
                       vcgStackLcasStatusOper 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.6
The oper status of the relationship between two sub-layers. This value is determined by the Admin status and the Source State and the Sink State of the vcat member.
                       vcgStackLcasStatusAdmin 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.7
The admin status of the vcat member. This is relevant only for PL-20. For PL-100 all members are active.
                       vcgStackLcasSourceState 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.8
The Lcas Source State of the Vcat member.
                       vcgStackLcasSinkState 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.9
The Lcas Sink State of the Vcat member.
                       vcgStackStatusRow 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.10
The row status of the relationship between two sub-layers.
               vcgLinkConfigTable 1.3.6.1.4.1.4515.1.1.10.1.1.2
A table that contains, one entry for each Vcg interface in the, configuration and service parameters of the Vcg Channel.
                   vcgLinkConfigEntry 1.3.6.1.4.1.4515.1.1.10.1.1.2.1
An entry containing the result configuration and service parameters of a Vcg Channel. A new entry is created each when an entry is added to the vcgChannelConfigTable with a new VCG-if index. An entry is automaticaly deleted from the table when the last entry of the VCG-if is deleted from the table vcgChannelConfigTable.
                       vcgLinkConfigIndex 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.1
The ifIndex of the VCG link. This index is composed of: Slot=0, Port=trunk port number, Type=219, Path=group id.
                       vcgLinkConfigType 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.2
The type of the vcat group as configured by the NMS.
                       vcgLinkConfigLcasSupport 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.3
Should this channel support the LCAS protocol. Configured by the NMS.
                       vcgLinkConfigExtensionSupport 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.4
Should this channel support the GFP extension. Configured by the NMS. This field should be true if there aremore than one channel on the same VCG.
                       vcgLinkConfigResetPmCounters 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.5
Setting this variable to 1 will cause the current interval VCG PM counters of the Channel to be initialized to zero (0).
                       vcgLinkConfigValidIntervals 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.6
The number of previous near end intervals for which data was collected.
                       vcgLinkConfigLcasHoldOfTime 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.7
The number of milli-seconds to wait before the Lcas make a transition from Good state to Bad state.
                       vcgLinkConfigLcasWaitToRestoreTime 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.8
The number of milli-seconds to wait before the Lcas make a transition from Bad state to Good state.
                       vcgLinkConfigStackApplyChanges 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.9
Writing to this object applies the changes done to the vcgStackStatusTable.
           vcgPm 1.3.6.1.4.1.4515.1.1.10.1.2
               vcgLinkCurrentTable 1.3.6.1.4.1.4515.1.1.10.1.2.1
The VCG current table contains various statistics being collected for the current 15 minute interval.
                   vcgLinkCurrentEntry 1.3.6.1.4.1.4515.1.1.10.1.2.1.1
An entry in the VCG Current table.
                       vcgLinkCurrentIndex 1.3.6.1.4.1.4515.1.1.10.1.2.1.1.1
The index value which uniquely identifies the VCG interface to which this entry is applicable.
                       vcgLinkCurrentRxVcatSyncLossSeconds 1.3.6.1.4.1.4515.1.1.10.1.2.1.1.2
The number of seconds a VCAT sync loss was detected during this interval.
                       vcgLinkCurrentRxLcasCrcErrors 1.3.6.1.4.1.4515.1.1.10.1.2.1.1.3
The number of Received Lcas messages with CRC error.
               vcgLinkIntervalTable 1.3.6.1.4.1.4515.1.1.10.1.2.2
The VCG current table contains various statistics being collected for the current 15 minute interval.
                   vcgLinkIntervalEntry 1.3.6.1.4.1.4515.1.1.10.1.2.2.1
An entry in the VCG Interval table.
                       vcgLinkIntervalIndex 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.1
The index value which uniquely identifies the VCG interface to which this entry is applicable.
                       vcgLinkIntervalNumber 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
                       vcgLinkIntervalRxVcatSyncLossSeconds 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.3
The number of seconds a VCAT sync loss was detected during this interval.
                       vcgLinkIntervalRxLcasCrcErrors 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.4
The number of Lcas messages with CRC error occurences during the interval.
               vcgLinkDayTable 1.3.6.1.4.1.4515.1.1.10.1.2.3
The Link day table contains various statistics being collected for the pervious 24 hours. interval.
                   vcgLinkDayEntry 1.3.6.1.4.1.4515.1.1.10.1.2.3.1
An entry in the Link Day table.
                       vcgLinkDayIndex 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.1
The index value which uniquely identifies the Link interface to which this entry is applicable.
                       vcgLinkDayNumber 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.2
A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.
                       vcgLinkDayRxVcatSyncLossSeconds 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.3
The number of seconds a VCAT sync loss was detected during this interval.
                       vcgLinkDayRxLcasCrcErrors 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.4
The number of Lcas messages with CRC error occurences during the interval.
           vcgTraps 1.3.6.1.4.1.4515.1.1.10.1.3
               vcgStackValueChange 1.3.6.1.4.1.4515.1.1.10.1.3.1
A vcgStackValueChange trap is sent when the value of the vcgStackLcasStatusOper of an instance vcgStackStatusTable is changed.
               vcgStackConfigurationChange 1.3.6.1.4.1.4515.1.1.10.1.3.2
A vcgStackConfigurationChange trap is sent when an entries in the vcgStackStatusTable are added or removed.