SHE-PTP-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: SHE-PTP-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SHE-ALARMING-MIB, AN-MIB, SHE-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 shePtpMIB 1.3.6.1.4.1.231.7.1.2.1.22
This MIB based on ptp-Mib proposal from IEEE1588 workin group. Management Information Base module for PTP configuration, default dataset, current dataset, parent dataset, global time proporties dataset, foreign dataset and port configuration dataset components. New supported with R3.7M.
       shePtpObjects 1.3.6.1.4.1.231.7.1.2.1.22.1
           shePtpBase 1.3.6.1.4.1.231.7.1.2.1.22.1.1
               shePtpAdminState 1.3.6.1.4.1.231.7.1.2.1.22.1.1.1 sheptpenabletype read-only
Enable or disable the Precision Time Protocol on this node. The default value is disabled. Note: SHE system will enable/disable the PTP subsystem via a configuration command in sheSyncMib. This will force an switchover between the system default sync module, which could use T3 or BITS or syncEthernet as sync sources configured and controled via sheSyncMib, and the PTP sync module configured and controled via this shePtpMib module. A modification will only be supported if CXU_B3 is used! All other CXU versions are not able to support timing over packet feature!
               shePtpManufacturerIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.1.2 snmpadminstring read-only
The value of manufacturerIdentity shall be an OUI owned by the manufacturer of the node.
               shePtpRevisionData 1.3.6.1.4.1.231.7.1.2.1.22.1.1.3 snmpadminstring read-only
Indication of the revisions for node hardware (HW), firmware (FW), and software (SW). This information shall be semicolon (;) separated (HW;FW;SW).
               shePtpClockType 1.3.6.1.4.1.231.7.1.2.1.22.1.1.4 octet string read-only
ClockType as defined in the CLOCK_DESCRIPTION management message. Indication of the PTP node type. A TRUE value of a bit in the clockType field indicates that the description applies to the node. 0 - ordinary clock 1 - boundary clock 2 - peer-to-peer transparent clock 3 - end-to-end transparent clock 4 - management node 5..0xF - Reserved
               shePtpVersion 1.3.6.1.4.1.231.7.1.2.1.22.1.1.5 unsigned32 read-only
Version number of supported IEEE1588 release.
           shePtpDefaultDataSet 1.3.6.1.4.1.231.7.1.2.1.22.1.2
               shePtpDefaultDSInitializable 1.3.6.1.4.1.231.7.1.2.1.22.1.2.1 truthvalue read-only
The clock can be reinitialized by a management message.
               shePtpDefaultDSTwoStepFlag 1.3.6.1.4.1.231.7.1.2.1.22.1.2.2 truthvalue read-only
Use Follow Up messages or not. Using Follow Up will increase PTP packet rate (2x Sync rate) and CPU load!
               shePtpDefaultDSIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.2.3 octet string read-only
The clockIdentity is an 8 octet (byte) array. The value range of each octet is 0..0xFF.
               shePtpDefaultDSNumberPorts 1.3.6.1.4.1.231.7.1.2.1.22.1.2.4 unsigned32 read-only
Number of available PTP port's in the system.
               shePtpDefaultDSClass 1.3.6.1.4.1.231.7.1.2.1.22.1.2.5 integer32 read-only
clockClass attribute of this ordinary slave-only clock. Default value is 255.
               shePtpDefaultDSAccuracy 1.3.6.1.4.1.231.7.1.2.1.22.1.2.6 integer32 read-only
Part of default dataset clockQuality struct. Characterizes a clock for the purpose of the best master clock (BMC) algorithm. This is an enum value as defined in clause 7.6.2.5, table 6 of IEEE1588-2008 standard. clockAccuracy is related to the time source and holdover specifications of this clock
               shePtpDefaultDSVariance 1.3.6.1.4.1.231.7.1.2.1.22.1.2.7 integer32 read-only
offsetScaledLogVariance defaultDS member, it is an attribute defining the stability of a clock. This is the precision of the timestamps included in messages issued by the clock when it is not synchronized to another clock using the protocol. The representation is described in clause 7.6.3.3 of IEEE1588-2008 standard.
               shePtpDefaultDSPriority1 1.3.6.1.4.1.231.7.1.2.1.22.1.2.8 integer read-only
priority1 attribute of this PTP clock. This attribute is used in the execution of the best master clock algorithm, if BMC is used. However in this PTP slave clock implementation SLAVE_ONLY mode is used and priority1 is meaningless in respect of BMC.
               shePtpDefaultDSPriority2 1.3.6.1.4.1.231.7.1.2.1.22.1.2.9 integer32 read-only
priority2 attribute of this PTP clock. This attribute is used in the execution of the best master clock algorithm, if BMC is used. However in this PTP slave clock implementation SLAVE_ONLY mode is used and priority2 is meaningless in respect of BMC.
               shePtpDefaultDSDomainNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.2.10 integer32 read-only
A domain number specifying the scope of PTP message communication, state, operations, data sets and timescale. 0 - default 1 - alternate domain 1 2 - alternate domain 2 3 - alternate domain 3 4..127 - user-defined 128..255 - reserved
               shePtpDefaultDSSlaveOnly 1.3.6.1.4.1.231.7.1.2.1.22.1.2.11 truthvalue read-only
Set to TRUE during initialization and not allowed to be changed as this is a slave-only clock.
           shePtpDefaultDataSetControl 1.3.6.1.4.1.231.7.1.2.1.22.1.3
               shePtpDefaultDSControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.3.1 sheptpcontrolrequesttype read-write
setPtpDefaultDataSet (10): shePtpDefaultDSControlInitializable shePtpDefaultDSControlTwoStepFlag shePtpDefaultDSControlIdentity shePtpDefaultDSControlPriority1 shePtpDefaultDSControlPriority2 shePtpDefaultDSControlDomainNumber
               shePtpDefaultDSControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.3.2 shecontrolstatustype read-only
The status of a user command.
               shePtpDefaultDSControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.3.3 gauge32 read-only
The maximum wait time for the manager for a long running user command.
               shePtpDefaultDSControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.3.4 sheptpcontrolrequestresulttype read-only
The result of the last user command.
               shePtpDefaultDSControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.3.5 unsigned32 read-only
The time stamp of the last command (end of command).
               shePtpDefaultDSControlInitializable 1.3.6.1.4.1.231.7.1.2.1.22.1.3.6 truthvalue read-write
look at group.
               shePtpDefaultDSControlTwoStepFlag 1.3.6.1.4.1.231.7.1.2.1.22.1.3.7 truthvalue read-write
look at group.
               shePtpDefaultDSControlIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.3.8 octet string read-write
look at group.
               shePtpDefaultDSControlPriority1 1.3.6.1.4.1.231.7.1.2.1.22.1.3.9 integer32 read-write
look at group.
               shePtpDefaultDSControlPriority2 1.3.6.1.4.1.231.7.1.2.1.22.1.3.10 integer32 read-write
look at group.
               shePtpDefaultDSControlDomainNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.3.11 integer32 read-write
look at group. Range 128...255 is reserved.
           shePtpCurrentDataSet 1.3.6.1.4.1.231.7.1.2.1.22.1.4
               shePtpCurrentDataSetStepsRemoved 1.3.6.1.4.1.231.7.1.2.1.22.1.4.1 integer32 read-only
The number of communication paths traversed between the local clock and the grandmaster clock.
               shePtpCurrentDataSetOffsettFromMasterSeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.2 integer32 read-only
Implementation-specific current value of the time difference between a master and a slave as computed by the slave in seconds.
               shePtpCurrentDataSetOffsettFromMasterNanoSeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.3 integer32 read-only
Implementation-specific current value of the time difference between a master and a slave as computed by the slave in nano-seconds.
               shePtpCurrentDataSetMeanPathDelaySeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.4 integer32 read-only
Implementation-specific current value of the mean propagation time between a master and slave clock as computed by the slave in seconds.
               shePtpCurrentDataSetMeanPathDelayNanoSeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.5 integer32 read-only
Implementation-specific current value of the mean propagation time between a master and slave clock as computed by the slave in nano-seconds.
           shePtpParentDataSet 1.3.6.1.4.1.231.7.1.2.1.22.1.5
               shePtpParentClockIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.5.1 octet string read-only
Identifies parent clock this slave clock is synchronized to. The clockIdentity is an 8 octet (byte) array. The value range of each octet is 0..0xFF.
               shePtpParentClockPortNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.5.2 integer32 read-only
Port number of master clock to which this clock synchronizes.
               shePtpParentGrandmasterIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.5.3 octet string read-only
ClockIdentity attribute of the grandmaster clock.
               shePtpParentGrandmasterClockClass 1.3.6.1.4.1.231.7.1.2.1.22.1.5.4 integer32 read-only
Part of grandmaster clock quality struct.
               shePtpParentGrandmasterClockAccuracy 1.3.6.1.4.1.231.7.1.2.1.22.1.5.5 integer32 read-only
Part of grandmaster clock quality struct.
               shePtpParentGrandmasterClockVariance 1.3.6.1.4.1.231.7.1.2.1.22.1.5.6 integer32 read-only
Part of grandmaster clock quality struct.
               shePtpParentGrandmasterPriority1 1.3.6.1.4.1.231.7.1.2.1.22.1.5.7 integer32 read-only
Priority1 attribute of the grandmaster clock.
               shePtpParentGrandmasterPriority2 1.3.6.1.4.1.231.7.1.2.1.22.1.5.8 integer32 read-only
Priority2 attribute of the grandmaster clock.
           shePtpPortDataSetTable 1.3.6.1.4.1.231.7.1.2.1.22.1.6 no-access
The table containing Port Data Set entries for each port of this clock. For the single port of this clock, ShePtpPortDataSetEntry is maintained as the basis for protocol decisions and providing values for message fields. The number of the table entries is the value of shePtpDefaultDSNumberPorts.
               shePtpPortDataSetEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1 no-access
PTP configuration information for a particular port.
                   shePtpPortDSPortNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.1 integer32 read-only
The value of the portNumber for a port on a PTP node supporting a single PTP port shall be 1. The values of the port numbers for the N ports on a PTP node supporting N PTP ports shall be 1, 2, ..N, respectively
                   shePtpPortDSClockIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.2 octet string read-only
PortIdentity attribute of the local port.
                   shePtpPortDSDelayMechanism 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.3 sheptpportdsdelaymechanismtype read-only
Indication of the propagation delay measuring option used by the port in computing shePtpCurrentDataSetMeanPathDelay*. Possible values: E2E (0x01) - The port is configured to use the delay request-response mechanism; P2P (0x02) - The port is configured to use the peer delay mechanism; DISABLED (0xFE) - The port does not implement the delay mechanism.
                   shePtpPortDSAcceptableMasterEnabled 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.4 truthvalue read-only
Enable/Disable the usage of acceptableMasterTable. The Acceptable Master Table is always used and this attribute value is always TRUE.
                   shePtpPortDSUnicastNegotiationEnabled 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.5 truthvalue read-only
This atrribute determines if the message negotiation is used (TRUE) or not (FALSE) in case unicast communications is used, for any master clock entered in the acceptableMasterTable. This is a global flag to enable/disable unicast negotiation. This flag must be set to true and an entry added to the acceptableMasterTable and the discoveryMasterTable for autonegotiation to be started with given master clock.
                   shePtpPortDSUnicastNegotiationDuration 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.6 integer32 read-only
The duration in seconds for which to request unicast contracts. Only relevant for negotiated unicast streams, i.e. to the master clocks which port addresses are present in the shePtpUnicastDiscoveryMasterTable.
                   shePtpPortDSUnicastLogQueryInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.7 integer32 read-only
The log to the base 2 value of the request rate (per second) when trying to establish a unicast contract with a remote master device (when it does not respond immediately).
                   shePtpPortDSVlanId 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.8 integer32 read-only
ID of VLAN used for PTP traffic. This configuration is only a reference to used VLAN - no explicite Vlan create configuration in the NE will be forced by this setting. The interface configuration including IpAddress, SubnetMask and Vlan has to be made via general sheSystemIpHostTable configuration.
                   shePtpPortDSLogMeanSyncInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.9 sheptpportdsintervaltype read-only
The interval to use for multicast sync messages on this port. This is log2(1/Sync packet rate) PTP version 2.
                   shePtpPortDSLogMinMeanDelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.10 sheptpportdsintervaltype read-only
In PTP v2 for a slave device this is the preferred interval to be used for transmitting delay request messages but is subject to any minimum specified by the master. Logarithm to the base 2 of the minDelayReqInterval.
                   shePtpPortDSLogMeanAnnounceInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.11 integer32 read-only
The interval to use for multicast announce messages on this port. This is log to the base 2 of the Announce message rate (per second).
                   shePtpPortDSAnnounceReceiptTimeout 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.12 integer32 read-only
The timeout period, in announce message intervals, within which at least one announce message must be received.
                   shePtpPortDSLogMinPdelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.13 integer32 read-only
The minimum permitted mean time interval between successive Pdelay_Req messages. By default this attribute is initialized to the value of shePtpPortDSLogMeanSyncInterval. This is log to the base 2 of the Pdelay_req message rate (per second).
                   shePtpPortDSAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.14 shealarmsevprofileindex read-only
This index selects an item in the sheAlarmSeverityProfileTable. It is used to assign the reported alarm to a severity.
           shePtpPortDataSetControl 1.3.6.1.4.1.231.7.1.2.1.22.1.7
               shePtpPortDataSetControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.7.1 sheptpcontrolrequesttype read-write
setPtpPortConfigDataSet (11): shePtpPortDataSetControlIndex shePtpPortDataSetControlUnicastNegotiationEnabled shePtpPortDataSetControlUnicastNegotiationDuration shePtpPortDataSetControlUnicastLogQueryInterval shePtpPortDataSetControlVlanId shePtpPortDataSetControlLogMeanSyncInterval shePtpPortDataSetControlLogMinMeanDelayReqInterval shePtpPortDataSetControlLogMeanAnnounceInterval shePtpPortDataSetControlAnnounceReceiptTimeout shePtpPortDataSetControlLogMinPdelayReqInterval shePtpPortDataSetControlAlarmSeverityIndex
               shePtpPortDataSetControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.7.2 shecontrolstatustype read-only
The status of a user command.
               shePtpPortDataSetControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.7.3 gauge32 read-only
The maximum wait time for the manager for a long running user command.
               shePtpPortDataSetControlControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.7.4 sheptpcontrolrequestresulttype read-only
The result of the last user command.
               shePtpPortDataSetControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.7.5 unsigned32 read-only
The time stamp of the last command (end of command).
               shePtpPortDataSetControlIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.7.6 integer32 read-write
The index of port DS for configuration.
               shePtpPortDataSetControlUnicastNegotiationEnabled 1.3.6.1.4.1.231.7.1.2.1.22.1.7.7 truthvalue read-write
look at table.
               shePtpPortDataSetControlUnicastNegotiationDuration 1.3.6.1.4.1.231.7.1.2.1.22.1.7.8 integer32 read-write
look at table.
               shePtpPortDataSetControlUnicastLogQueryInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.9 integer32 read-write
look at table.
               shePtpPortDataSetControlVlanId 1.3.6.1.4.1.231.7.1.2.1.22.1.7.10 integer32 read-write
look at table.
               shePtpPortDataSetControlLogMeanSyncInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.11 sheptpportdsintervaltype read-write
look at table.
               shePtpPortDataSetControlLogMinMeanDelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.12 sheptpportdsintervaltype read-write
look at table.
               shePtpPortDataSetControlLogMeanAnnounceInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.13 integer32 read-write
look at table.
               shePtpPortDataSetControlAnnounceReceiptTimeout 1.3.6.1.4.1.231.7.1.2.1.22.1.7.14 integer32 read-write
look at table.
               shePtpPortDataSetControlLogMinPdelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.15 integer32 read-write
look at table.
               shePtpPortDataSetControlAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.7.16 shealarmsevprofileindex read-write
look at table
           shePtpForeignMasterDataSetTable 1.3.6.1.4.1.231.7.1.2.1.22.1.8 no-access
This table is maintained for the purpose of qualifying Announce messages, it is used by best master clock algorithm. There will be an entry dynamically created in the table for each master clock from which Announce messages are received on corresponding (shePtpPortDSPortNumber) clock port.
               shePtpForeignMasterDataSetEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1 no-access
PTP configuration information for a particular port.
                   shePtpForeignMasterDSIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.1 unsigned32 read-only
Second Index for table, Count of foreign master entries on a port. Foreign Master Data set shall have a minimum capacity of 5 foreign master records
                   shePtpForeignMasterDSNumberForeignRecords 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.2 integer32 read-only
Count of foreign clock records on a port. This equals to the actual number of foreign clocks from which Announce messages are received. Table shall have a minimum capacity of 5 foreign master records.
                   shePtpForeignMasterDSClockIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.3 octet string read-only
Part of the sourcePortIdentity field value of an Announce message received from the foreign master.
                   shePtpForeignMasterDSPortNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.4 integer32 read-only
Part of the sourcePortIdentity field value of an Announce message received from the foreign master.
                   shePtpForeignMasterDSAnnounceMessages 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.5 unsigned32 read-only
The number of Announce messages from the foreign master indicated by the shePtpForeignMasterDSClockIdentity and shePtpForeignMasterDSPortNumber (foreignMasterPortIdentity) that have been received within a time window of duration 4 * shePtpPortDSLogMeanAnnounceInterval.
                   shePtpForeignMasterDSNetworkProtocol 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.6 sheptpacceptablemasternetworkprotocoltype read-only
Supported PTP transport protocol is only IP/UDP.
                   shePtpForeignMasterDSProtocolAddressLength 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.7 integer32 read-only
Supported PTP transport protocol is only IP/UDP so address length is always 4.
                   shePtpForeignMasterDSProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.8 octet string read-only
The IP address of the detected foreign master.
           shePtpAcceptableMasterTable 1.3.6.1.4.1.231.7.1.2.1.22.1.9 no-access
Configure acceptable master clocks entries.
               shePtpAcceptableMasterEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1 no-access
An entry per each PTP server to which this slave clock is allowed to synchronize. All Announce and other PTP messages sent by master clock which is not in the shePtpAcceptableMasterTable will be ignored, e.g. not considered by Best Master Clock algorithm.
                   shePtpAcceptableMasterIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.1 unsigned32 read-only
Index for table, Count of configured acceptable master entries.
                   shePtpAcceptableMasterNetworkProtocol 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.2 sheptpacceptablemasternetworkprotocoltype read-only
Supported PTP transport protocol is only IP/UDP.
                   shePtpAcceptableMasterProtocolAddressLength 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.3 integer32 read-only
Supported PTP transport protocol is only IP/UDP so address length is always 4.
                   shePtpAcceptableMasterProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.4 octet string read-only
The IP address of the configured acceptable master.
                   shePtpAcceptableMasterPriority 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.5 integer32 read-only
This attribute is an alternate priority to be used to determine best master clock. If shePtpAcceptableMasterPriority is 0 it shall have no effect on computation determination of best master clock. If the value of shePtpAcceptableMasterPriority is greater than 0, the value of priority1 in the Announce message from the remote port shall be replaced by the value of the shePtpAcceptableMasterPriority for purposes of determining best master clock.
                   shePtpAcceptableMasterUnicast 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.6 truthvalue read-only
This attribute determines the communications type used for PTP messages (unicast/multicast). It depends on destination IP address type of the packets (master clock port address or IP multicast domain). It is set to TRUE if unicast communication is used or set to FALSE if multicast addresses are used (standard PTP assigned IP multicast addresses).
                   shePtpAcceptableMasterMinTimingPktSize 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.7 integer32 read-only
The minimum packet size to use for packets carrying timing information. This is the total packet size after all protocol headers have been added, but excluding the Ethernet FCS. The required packet size is achieved by adding padding bytes to the minimum timing packet size required by the PTP protocol. If the specified value is less than the minimum quired by the protocol it will be ignored. Hence specifying zero will always use the standard packet size - no padding will be added to the PTP messages.
                   shePtpAcceptableMasterSyncStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.8 sheptpacceptablemastersyncstatetype read-only
This parameter show the clock recovery algorithm status which is an enum of values { FREERUN, HOLDOVER, ACQUIRING, ACQUIRED }. For normal operation, i.e. when this slave clock is synchronized to any master clock that attribute will have 'ACQUIRED' value.
           shePtpAcceptableMasterControl 1.3.6.1.4.1.231.7.1.2.1.22.1.10
                 shePtpAcceptableMasterControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.10.1 sheptpcontrolrequesttype read-write
createPtpAcceptableMasterTableEntry (12): shePtpAcceptableMasterControlProtocolAddress shePtpAcceptableMasterControlPriority shePtpAcceptableMasterControlUnicast shePtpAcceptableMasterControlMinTimingPktSize modifyPtpAcceptableMasterTableEntry (13): shePtpAcceptableMasterControlIndex shePtpAcceptableMasterControlProtocolAddress shePtpAcceptableMasterControlPriority shePtpAcceptableMasterControlUnicast shePtpAcceptableMasterControlMinTimingPktSize deletePtpAcceptableMasterTableEntry (14): shePtpAcceptableMasterControlIndex
                 shePtpAcceptableMasterControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.10.2 shecontrolstatustype read-only
The status of a user command.
                 shePtpAcceptableMasterControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.10.3 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                 shePtpAcceptableMasterControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.10.4 sheptpcontrolrequestresulttype read-only
The result of the last user command.
                 shePtpAcceptableMasterControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.10.5 unsigned32 read-only
The time stamp of the last command (end of command).
                 shePtpAcceptableMasterControlIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.10.6 integer32 read-write
The index of acceptable master table entry for configuration.
                 shePtpAcceptableMasterControlProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.10.7 octet string read-write
look at table.
                 shePtpAcceptableMasterControlPriority 1.3.6.1.4.1.231.7.1.2.1.22.1.10.8 integer32 read-write
look at table.
                 shePtpAcceptableMasterControlUnicast 1.3.6.1.4.1.231.7.1.2.1.22.1.10.9 truthvalue read-write
look at table.
                 shePtpAcceptableMasterControlMinTimingPktSize 1.3.6.1.4.1.231.7.1.2.1.22.1.10.10 integer32 read-write
look at table.
           shePtpUnicastDiscoveryMasterTable 1.3.6.1.4.1.231.7.1.2.1.22.1.11 no-access
The table is used by this slave clock to start negotiation of message rates with required master clocks. It is only meaningful when unicast communications is used and shePtpPortDSUnicastNegotiationEnabled attribute of corresponding clock port is set to TRUE.
                 shePtpUnicastDiscoveryMasterEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1 no-access
Request, that the master identified by this antry, transmits unicast Announce, Sync and Delay_Resp messages to that slave clock will be sent. PTP message rates autonegotiation will be performed with a master identified by this entry.
                     shePtpUnicastDiscoveryMasterIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.1 sheptpunicastdiscoverymasterindextype read-only
second table Index
                     shePtpUnicastDiscoveryMasterNetworkProtocol 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.2 sheptpacceptablemasternetworkprotocoltype read-only
Supported PTP transport protocol is only IP/UDP.
                     shePtpUnicastDiscoveryMasterProtocolAddressLength 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.3 integer32 read-only
Supported PTP transport protocol is only IP/UDP so address length is always 4.
                     shePtpUnicastDiscoveryMasterProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.4 octet string read-only
Protocol address of master clock port to which this slave clock is to be sending unicast message GRANT REQUESTS, i.e. unicast discovery of the master which port address is added to the shePtpUnicastDiscoveryMasterTable shall be in effect right after an entry is added (if this address is not yet in the shePtpUnicastDiscoveryMasterTable and PTP message rates are not already negotiated). Please NOTE that the master's port address must be added in advance to the shePtpAcceptableMasterTable too.
           shePtpUnicastDiscoveryMasterControl 1.3.6.1.4.1.231.7.1.2.1.22.1.12
                 shePtpUnicastDiscoveryMasterControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.12.1 sheptpcontrolrequesttype read-write
createPtpUnicastDiscoveryMasterTableEntry (15): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlProtocolAddress modifyPtpUnicastDiscoveryMasterTableEntry (16): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlIndex shePtpUnicastDiscoveryMasterControlProtocolAddress deletePtpUnicastDiscoveryMasterTableEntry (17): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlIndex
                 shePtpUnicastDiscoveryMasterControlControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.12.2 shecontrolstatustype read-only
The status of a user command.
                 shePtpUnicastDiscoveryMasterControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.12.3 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                 shePtpUnicastDiscoveryMasterControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.12.4 sheptpcontrolrequestresulttype read-only
The result of the last user command.
                 shePtpUnicastDiscoveryMasterControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.12.5 unsigned32 read-only
The time stamp of the last command (end of command).
                 shePtpUnicastDiscoveryMasterControlPortDsNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.12.6 unsigned32 read-write
The index 1 of unicast discovery master table entry for configuration - portDs index.
                 shePtpUnicastDiscoveryMasterControlIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.12.7 sheptpunicastdiscoverymasterindextype read-write
The index 2 of unicast discovery master table.
                 shePtpUnicastDiscoveryMasterControlProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.12.8 octet string read-write
look at table.
       shePtpNotifications 1.3.6.1.4.1.231.7.1.2.1.22.2
           shePtpEvents 1.3.6.1.4.1.231.7.1.2.1.22.2.1
               shePtpAdminStateChanged 1.3.6.1.4.1.231.7.1.2.1.22.2.1.1
The administrative state of the PTP subsystem has changed.
               shePtpDefaultDataSetModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.2
Notification for successful PTP default data set configuration.
               shePtpPortConfigDataModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.3
Notification for successfull PTP port config data configuration.
               shePtpAcceptableMasterTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.22.2.1.4
Notification for successfull create of PTP acceptable master table entry.
               shePtpAcceptableMasterTableEntryModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.5
Notification for successfull modify of PTP acceptable master table entry.
               shePtpAcceptableMasterTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.22.2.1.6
Notification for successfull delete of PTP acceptable master table entry.
               shePtpUnicastDiscoveryMasterTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.22.2.1.7
Notification for successfull create of PTP unicast discovery master table entry.
               shePtpUnicastDiscoveryMasterTableEntryModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.8
Notification for successfull modify of PTP unicast discovery master table entry.
               shePtpUnicastDiscoveryMasterTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.22.2.1.9
Notification for successfull delete of PTP unicast discovery master table entry.
               shePtpForeignMasterTableChanged 1.3.6.1.4.1.231.7.1.2.1.22.2.1.10
This trap will be send if the foreign master table changes because of new detected masters or a alraedy detected entry is lost.
           shePtpAlarms 1.3.6.1.4.1.231.7.1.2.1.22.2.2
               shePtpSynchronizationAlarm 1.3.6.1.4.1.231.7.1.2.1.22.2.2.1
This alarm will be activated if the ptp sync module is enabled and no external sync master was found or connection could not be established or was lost.
               shePtpIpHostInterfaceAlarm 1.3.6.1.4.1.231.7.1.2.1.22.2.2.2
This alarm will be activated: 1. If the ptp sync module is enabled and no valid IpHostInterface configuration could be detected. -> Configure a valid host interface via sheSystemIpHostTable. 2. The used interface was reconfigured during ongoing PTP session. -> The PTP module must be restarted.
       shePtpConformance 1.3.6.1.4.1.231.7.1.2.1.22.100
               shePtpCompliances 1.3.6.1.4.1.231.7.1.2.1.22.100.1
                   shePtpCompliance 1.3.6.1.4.1.231.7.1.2.1.22.100.1.1
The compliance statement for SNMP entities which implement the PTP MIB.
               shePtpGroups 1.3.6.1.4.1.231.7.1.2.1.22.100.2
                   shePtpGroup 1.3.6.1.4.1.231.7.1.2.1.22.100.2.1
Description.
                   shePtpControlGroup 1.3.6.1.4.1.231.7.1.2.1.22.100.2.2
Description.
                   shePtpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.22.100.2.3
Description.