SCA-BOX-MIB: View SNMP OID List / Download MIB

VENDOR: CRAY COMMUNICATIONS


 Home MIB: SCA-BOX-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SCANET-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 box 1.3.6.1.4.1.208.3
     enclosure 1.3.6.1.4.1.208.3.1
         led 1.3.6.1.4.1.208.3.1.1 octet string read-only
ts-xxxx 0 : red off(0),red(1) 1 : green off(0),green(2) cs-xxxx 0 : fault off(0),red(1) 1 : master off(0),green(2) 2 : test1 off(0),yellow(4) 3 : test2 off(0),yellow(4) 4 : test3 off(0),yellow(4) 5 : test4 off(0),yellow(4) 6 : rx/tx off(0),green(2) se-xxxx 0 : fault off(0),red(1) 1 : power off(0),green(2) 2 : status1 off(0),red(1),green(2),yellow(4) 3 : status2 off(0),red(1),green(2),yellow(4) 4 : status3 off(0),red(1),green(2),yellow(4) 5 : status4 off(0),red(1),green(2),yellow(4) 6 : status5 off(0),red(1),green(2),yellow(4) Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency.
         fan 1.3.6.1.4.1.208.3.1.2 integer read-only
If this object returns 1 then a Fan has failed. Enumeration: 'fanFailure': 1.
         power 1.3.6.1.4.1.208.3.1.3 integer read-only
If this object returns a non-zero value then one or more power supplies have failed. Enumeration: 'power4Failure': 8, 'power3Failure': 4, 'power1Failure': 1, 'power5Failure': 16, 'power2Failure': 2, 'power6Failure': 32.
         slots 1.3.6.1.4.1.208.3.1.4 integer read-only
The number of slots in the enclosure. Enumeration: 'slot-5': 5, 'slot-14': 14, 'slot-17': 17, 'slot-2': 2.
         slotmap 1.3.6.1.4.1.208.3.1.5 octet string read-only
A bitmap of the slots in which a card is present. Setting bit0 to 1 indicates that a card is present in slot 1, and so on.
         temperature 1.3.6.1.4.1.208.3.1.6 integer read-only
If this object returns 1 then a temperature sensor has detected an excessive temperature in the enclosure. Enumeration: 'temperatureFailure': 1.
         fanNo 1.3.6.1.4.1.208.3.1.7 integer read-only
Total number of fans supported.
         powerNo 1.3.6.1.4.1.208.3.1.8 integer read-only
Total number of power supplies supported.
         temperatureNo 1.3.6.1.4.1.208.3.1.9 integer read-only
A return value of 1 indicates that temperature sensors are supported in the enclosure. Enumeration: 'yes': 1.
         fanPresent 1.3.6.1.4.1.208.3.1.10 integer read-only
A bitmask of the fans that are present. Bit0 refers to fan 1, bit 1 to fan 2, etc.
         powerPresent 1.3.6.1.4.1.208.3.1.11 integer read-only
A bitmask of the power supples that are present. Bit0 refers to power supply 1, bit 1 to power supply 2, etc.
         temperaturePresent 1.3.6.1.4.1.208.3.1.12 integer read-only
A return value of 1 indicates that temperature sensors are present in the enclosure. Enumeration: 'yes': 1.
         psuFail 1.3.6.1.4.1.208.3.1.13 integer no-access
This object returns a non-zero value in a trap according to the power supply number when a power supply have failed. Enumeration: 'psu3Failure': 3, 'psu2Failure': 2, 'psu1Failure': 1, 'psu5Failure': 5, 'psu4Failure': 4, 'psu6Failure': 6.
         slotmapFail 1.3.6.1.4.1.208.3.1.14 integer no-access
This object returns a non-zero value in a trap according to the slot number when a card is enabled or disabled in the system center
     boards 1.3.6.1.4.1.208.3.2
         brdInfoTable 1.3.6.1.4.1.208.3.2.1 no-access
             brdInfoEntry 1.3.6.1.4.1.208.3.2.1.1 no-access
Info from 32 bytes standard memory area.
                 brdNumber1 1.3.6.1.4.1.208.3.2.1.1.1 integer read-only
Board Sequence number in enclosure (= slot number)
                 cardType 1.3.6.1.4.1.208.3.2.1.1.2 integer read-only
Unique 16 bit card type This ID is used for unique sw identification of the card. The list of possible return values is company private.
                 pcbRevision 1.3.6.1.4.1.208.3.2.1.1.3 integer read-only
PCB Revision number
                 macAddress 1.3.6.1.4.1.208.3.2.1.1.4 octet string read-only
The Base MAC-Address allocated for MAC Interfaces on the board.
                 driverSeq 1.3.6.1.4.1.208.3.2.1.1.5 integer read-only
Required driver sequence number (SW)
                 product 1.3.6.1.4.1.208.3.2.1.1.6 displaystring read-only
Product Identification.
                 serialNumber 1.3.6.1.4.1.208.3.2.1.1.7 octet string read-only
Production serial number
                 masterSlave 1.3.6.1.4.1.208.3.2.1.1.8 integer read-only
The board backplane bus properties.
                 ram 1.3.6.1.4.1.208.3.2.1.1.9 integer read-only
                 shram 1.3.6.1.4.1.208.3.2.1.1.10 integer read-only
                 eprom 1.3.6.1.4.1.208.3.2.1.1.11 integer read-only
                 e2prom 1.3.6.1.4.1.208.3.2.1.1.12 integer read-only
                 flashprom 1.3.6.1.4.1.208.3.2.1.1.13 integer read-only
                 spec0 1.3.6.1.4.1.208.3.2.1.1.14 octet string read-only
Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
                 spec1 1.3.6.1.4.1.208.3.2.1.1.15 octet string read-only
Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
                 spec2 1.3.6.1.4.1.208.3.2.1.1.16 octet string read-only
Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
                 spec3 1.3.6.1.4.1.208.3.2.1.1.17 octet string read-only
Specific board info The purpose of this BYTE is to indicate special board hw-options. The definition of this byte is board specific. A System Center product with relevant information in this byte have a specifiation in the product manual's.
                 ipAddr 1.3.6.1.4.1.208.3.2.1.1.18 ipaddress read-only
IP Address to Manage Board in this slot
                 nsap 1.3.6.1.4.1.208.3.2.1.1.19 octet string read-only
NSAP to Manage Board in this slot
         brdStatusTable 1.3.6.1.4.1.208.3.2.2 no-access
             brdStatusEntry 1.3.6.1.4.1.208.3.2.2.1 no-access
Status information from boards.
                 brdNumber2 1.3.6.1.4.1.208.3.2.2.1.1 integer read-only
Board Sequence number in enclosure (= slot number)
                 brdStatus 1.3.6.1.4.1.208.3.2.2.1.2 integer read-only
Board Status byte. bit0 - reserved bit1 Card Failed bit2 - reserved bit3 - reserved bit4 Red component of Status LED (active low) bit5 Green component of Status LED (active low) bit6 - reserved bit7 - reserved
                 brdLed 1.3.6.1.4.1.208.3.2.2.1.3 octet string read-only
Depends on the card type. Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency.
         brdPlugTable 1.3.6.1.4.1.208.3.2.3 no-access
Table of plugs (and the possibly attached pims) on the board
             brdPlugEntry 1.3.6.1.4.1.208.3.2.3.1 no-access
Information about plugs on boards.
                 brdNumber3 1.3.6.1.4.1.208.3.2.3.1.1 integer read-only
Board Sequence number in enclosure (= slot number)
                 brdPlugNumber 1.3.6.1.4.1.208.3.2.3.1.2 integer read-only
Plug Number - used to index plugs on board.
                 brdPlugPosition 1.3.6.1.4.1.208.3.2.3.1.3 octet string read-only
Position/name of plug on board.
                 brdPlugStatus 1.3.6.1.4.1.208.3.2.3.1.4 integer read-only
Availability of plug on this hardware revision Enumeration: 'notAvailable': 1, 'available': 2.
                 brdPlugType 1.3.6.1.4.1.208.3.2.3.1.5 octet string read-only
Type of plug
                 brdPlugPimType 1.3.6.1.4.1.208.3.2.3.1.6 octet string read-only
Type of pim inserted in plug
                 brdPlugPimLeds 1.3.6.1.4.1.208.3.2.3.1.7 octet string read-only
Status of LEDs on pim in plug
                 brdPlugPimOptions 1.3.6.1.4.1.208.3.2.3.1.8 octet string read-only
Textual description of any options installed on pim in plug
         brdOptionTable 1.3.6.1.4.1.208.3.2.4 no-access
Table of various possible board options. Options might be sub-boards or other kinds of hardware options.
             brdOptionEntry 1.3.6.1.4.1.208.3.2.4.1 no-access
Information about board options.
                 brdNumber4 1.3.6.1.4.1.208.3.2.4.1.1 integer read-only
Board Sequence number in enclosure (= slot number)
                 brdOptionNumber 1.3.6.1.4.1.208.3.2.4.1.2 integer read-only
Option Number - used to index options on board. If options is visible on front panel, they must be sorted (top-most/left-most first).
                 brdOptionName 1.3.6.1.4.1.208.3.2.4.1.3 octet string read-only
Descriptive Name of option.
                 brdOptionState 1.3.6.1.4.1.208.3.2.4.1.4 integer read-only
Is the option installed ? Enumeration: 'notInstalled': 1, 'installed': 2.
         brdSwitchSettingTable 1.3.6.1.4.1.208.3.2.5 no-access
Table of switch settings on the board.
             brdSwitchSettingEntry 1.3.6.1.4.1.208.3.2.5.1 no-access
Information about Switch Setting
                 brdNumber5 1.3.6.1.4.1.208.3.2.5.1.1 integer read-only
Board Sequence number in enclosure (= slot number)
                 brdSwitchNumber 1.3.6.1.4.1.208.3.2.5.1.2 integer read-only
Switch Number - used to index switches on board.
                 brdSwitchName 1.3.6.1.4.1.208.3.2.5.1.3 octet string read-only
Descriptive Name - used to identify switch on board.
                 brdSwitchSetting 1.3.6.1.4.1.208.3.2.5.1.4 octet string read-only
Descriptive Name - used to describe switch setting on board. Eg. 'On', 'Off', 'Enabled', 'Disabled', '0', '01001100', 'A', 'B', 'C', 'Open', 'Closed', 'Inserted', 'Not inserted', etc.
       boxPowerFailureEvent 1.3.6.1.4.1.208.30.1
This trap is sent when a power supply failure has been detected. The variable indicates the failing power supply.
       boxFanFailureEvent 1.3.6.1.4.1.208.30.2
This trap is sent when a fan failure has been detected.
       boxTempFailureEvent 1.3.6.1.4.1.208.30.3
This trap is sent when a temperature sensor has detected excessive temperature in the enclosure.
       boxModuleInsertedEvent 1.3.6.1.4.1.208.30.4
This trap is sent when a module is inserted in the the enclosure. The variable slotmapFail indicates in which slot a module is inserted
       boxModuleRemovedEvent 1.3.6.1.4.1.208.30.5
This trap is sent when a module is removed in the the enclosure. The variable slotmapFail indicates in which slot a module is removed