SAF-INTEGRAX-MIB: View SNMP OID List / Download MIB

VENDOR: SAF TEHNIKA


 Home MIB: SAF-INTEGRAX-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, IANAifType-MIB, SAF-ENTERPRISE, SAF-INTEGRA-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 integraX 1.3.6.1.4.1.7571.100.1.1.7.10
SAF Integra-X device management base
       integraXtimestamp 1.3.6.1.4.1.7571.100.1.1.7.10.1 dateandtime read-only
Last data update time
       integraXradio 1.3.6.1.4.1.7571.100.1.1.7.10.2
           integraXradioA 1.3.6.1.4.1.7571.100.1.1.7.10.2.1
               integraXradioAtxPower 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.1 integer32 read-only
Output power of radio transmitter
               integraXradioAtxFrequency 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.2 integer32 read-only
Frequency of radio transmitter
               integraXradioArxLevel 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.3 integer32 read-only
Level of the received signal
               integraXradioArxLevelState 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.4 integer read-only
Received signal level state Enumeration: 'high': 3, 'ok': 1, 'low': 2, 'error': 4.
               integraXradioAside 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.5 integer read-only
Radio side: Low/High Enumeration: 'high': 1, 'low': 2, 'error': 3.
               integraXradioAtxMute 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.6 integer read-only
Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable Enumeration: 'on': 1, 'off': 2, 'error': 3.
               integraXradioAtxMuteDuration 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.7 integer32 read-only
Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
               integraXradioAduplexShift 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.8 integer32 read-only
Utilized duplex shift in kHz
               integraXradioArxFrequency 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.9 integer32 read-only
Frequency of radio receiver
               integraXradioAtemperature 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.10 fixeddiv10 read-only
Radio module temperature
               integraXradioApll 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.11 integer read-only
PLL state of local-oscillator generator Enumeration: 'ok': 2, 'error': 1.
               integraXradioArangesTable 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12 no-access
Network interface port status data.
                     integraXradioArangeEntry 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1 no-access
An entry containing network physical port status info.
                         integraXradioArangeEntryIndex 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.1 integer32 read-only
A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
                         integraXradioArangeDescr 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.2 displaystring read-only
'Minimal' and 'maximal' labels
                         integraXradioArangeTxPower 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.3 integer32 read-only
Output power ranges for radio transmitter
                         integraXradioArangeTxFrequency 1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.4 integer32 read-only
Frequency ranges for radio transmitter
           integraXradioB 1.3.6.1.4.1.7571.100.1.1.7.10.2.2
               integraXradioBtxPower 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.1 integer32 read-only
Output power of radio transmitter
               integraXradioBtxFrequency 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.2 integer32 read-only
Frequency of radio transmitter
               integraXradioBrxLevel 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.3 integer32 read-only
Level of the received signal
               integraXradioBrxLevelState 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.4 integer read-only
Received signal level state Enumeration: 'high': 3, 'ok': 1, 'low': 2, 'error': 4.
               integraXradioBside 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.5 integer read-only
Radio side: Low/High Enumeration: 'high': 1, 'low': 2, 'error': 3.
               integraXradioBtxMute 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.6 integer read-only
Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable Enumeration: 'on': 1, 'off': 2, 'error': 3.
               integraXradioBtxMuteDuration 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.7 integer32 read-only
Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
               integraXradioBduplexShift 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.8 integer32 read-only
Utilized duplex shift in kHz
               integraXradioBrxFrequency 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.9 integer32 read-only
Frequency of radio receiver
               integraXradioBtemperature 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.10 fixeddiv10 read-only
Radio module temperature
               integraXradioBpll 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.11 integer read-only
PLL state of local-oscillator generator Enumeration: 'ok': 2, 'error': 1.
               integraXradioBrangesTable 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12 no-access
Network interface port status data.
                     integraXradioBrangeEntry 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1 no-access
An entry containing network physical port status info.
                         integraXradioBrangeEntryIndex 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.1 integer32 read-only
A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
                         integraXradioBrangeDescr 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.2 displaystring read-only
'Minimal' and 'maximal' labels
                         integraXradioBrangeTxPower 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.3 integer32 read-only
Output power ranges for radio transmitter
                         integraXradioBrangeTxFrequency 1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.4 integer32 read-only
Frequency ranges for radio transmitter
       integraXmodem 1.3.6.1.4.1.7571.100.1.1.7.10.3
           integraXmodemA 1.3.6.1.4.1.7571.100.1.1.7.10.3.1
               integraXmodemAacquireStatus 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.1 integer read-only
This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. Enumeration: 'acquireLocked': 2, 'acquireInProgress': 1, 'acquireFailed': 3.
               integraXmodemAnormalizedMse 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.2 integer32 read-only
Current normalized MSE value (floating point value multiplied by 10)
               integraXmodemAfecLoad 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.3 displaystring read-only
Decoder stress or FEC load value (floating point in textual representation)
               integraXmodemAxpdEst 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.4 integer32 read-only
XPD Estimated value (floating point value multiplied by 10)
               integraXmodemAacquireLastStatusDetails 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.5 integer read-only
This is the last status of successfull or unsuccessful modem data acquire Enumeration: 'acquireMSEerror': 5, 'acquireLocked': 1, 'acquireSweep': 4, 'acquireSMerror': 13, 'acquireStopped': 12, 'acquireBITerror': 6.
               integraXmodemAtemperature 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.6 fixeddiv10 read-only
Modem DSP temperature
               integraXmodemArxModulation 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.7 displaystring read-only
Current (actual) Rx Modulation
               integraXmodemAtxModulation 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.8 displaystring read-only
Current (actual) Tx Modulation
               integraXmodemArxCapacity 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.9 integer32 read-only
Rx ethernet capacity in kilobits per second
               integraXmodemAtxCapacity 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.10 integer32 read-only
Tx ethernet capacity in kilobits per second
               integraXmodemAacmEngine 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.11 integer read-only
ACM engine status Enumeration: 'disabled': 2, 'enabled': 1, 'error': 3.
               integraXmodemAcarrierOffset 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.12 integer32 read-only
Modem carrier offset
               integraXmodemAcountTime 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.13 counter64 read-only
Modem performance count time
               integraXmodemAerroredBlock 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.14 counter64 read-only
Modem performance errored blocks
               integraXmodemAerroredSecond 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.15 counter64 read-only
Modem performance errored seconds
               integraXmodemAseverelyErroredSecond 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.16 counter64 read-only
Modem performance severely errored seconds
               integraXmodemAbackgroundBlockError 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.17 counter64 read-only
Modem performance background block errors
               integraXmodemAtotalBlockNumber 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.18 counter64 read-only
Modem performance total block number
               integraXmodemAerroredSecondRatio 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.19 displaystring read-only
Modem performance errored second ratio
               integraXmodemAseverelyErroredSecondRatio 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.20 displaystring read-only
Modem performance severely errored second ratio
               integraXmodemAbackgroundBlockErrorRatio 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.21 displaystring read-only
Modem performance background block error ratio
               integraXmodemAuptime 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.22 counter64 read-only
Modem performance : uptime
               integraXmodemAunavailtime 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.23 counter64 read-only
Modem performance : unavailtime
               integraXmodemAfecLdpcBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.24 counter64 read-only
Modem FEC load block counter
               integraXmodemAfecLdpcUncorrectedBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.25 counter64 read-only
Modem FEC load uncorrected block counter
               integraXmodemAfecLdpcUncorrectedPercent 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.26 integer32 read-only
Modem FEC load uncorrected percent
               integraXmodemAfecRsBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.27 counter64 read-only
Modem FEC load RS block counter
               integraXmodemAfecRsUncorrectedBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.28 counter64 read-only
Modem FEC load RS uncorrected block counter
               integraXmodemAmodulationACMmin 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.29 displaystring read-only
Minimal modulation for ACM enabled profile
               integraXmodemAmodulationACMmax 1.3.6.1.4.1.7571.100.1.1.7.10.3.1.30 displaystring read-only
Maximal modulation for ACM enabled profile
           integraXmodemB 1.3.6.1.4.1.7571.100.1.1.7.10.3.2
               integraXmodemBacquireStatus 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.1 integer read-only
This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. Enumeration: 'acquireLocked': 2, 'acquireInProgress': 1, 'acquireFailed': 3.
               integraXmodemBnormalizedMse 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.2 integer32 read-only
Current normalized MSE value (floating point value multiplied by 10)
               integraXmodemBfecLoad 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.3 displaystring read-only
Decoder stress or FEC load value (floating point in textual representation)
               integraXmodemBxpdEst 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.4 integer32 read-only
XPD Estimated value (floating point value multiplied by 10)
               integraXmodemBacquireLastStatusDetails 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.5 integer read-only
This is the last status of successfull or unsuccessful modem data acquire Enumeration: 'acquireMSEerror': 5, 'acquireLocked': 1, 'acquireSweep': 4, 'acquireSMerror': 13, 'acquireStopped': 12, 'acquireBITerror': 6.
               integraXmodemBtemperature 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.6 fixeddiv10 read-only
Modem DSP temperature
               integraXmodemBrxModulation 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.7 displaystring read-only
Current (actual) Rx Modulation
               integraXmodemBtxModulation 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.8 displaystring read-only
Current (actual) Tx Modulation
               integraXmodemBrxCapacity 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.9 integer32 read-only
Rx ethernet capacity in kilobits per second
               integraXmodemBtxCapacity 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.10 integer32 read-only
Tx ethernet capacity in kilobits per second
               integraXmodemBacmEngine 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.11 integer read-only
ACM engine status Enumeration: 'disabled': 2, 'enabled': 1, 'error': 3.
               integraXmodemBcarrierOffset 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.12 integer32 read-only
Modem carrier offset
               integraXmodemBcountTime 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.13 counter64 read-only
Modem performance count time
               integraXmodemBerroredBlock 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.14 counter64 read-only
Modem performance errored blocks
               integraXmodemBerroredSecond 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.15 counter64 read-only
Modem performance errored seconds
               integraXmodemBseverelyErroredSecond 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.16 counter64 read-only
Modem performance severely errored seconds
               integraXmodemBbackgroundBlockError 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.17 counter64 read-only
Modem performance background block errors
               integraXmodemBtotalBlockNumber 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.18 counter64 read-only
Modem performance total block number
               integraXmodemBerroredSecondRatio 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.19 displaystring read-only
Modem performance errored second ratio
               integraXmodemBseverelyErroredSecondRatio 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.20 displaystring read-only
Modem performance severely errored second ratio
               integraXmodemBbackgroundBlockErrorRatio 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.21 displaystring read-only
Modem performance background block error ratio
               integraXmodemBuptime 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.22 counter64 read-only
Modem performance : uptime
               integraXmodemBunavailtime 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.23 counter64 read-only
Modem performance : unavailtime
               integraXmodemBfecLdpcBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.24 counter64 read-only
Modem FEC load block counter
               integraXmodemBfecLdpcUncorrectedBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.25 counter64 read-only
Modem FEC load uncorrected block counter
               integraXmodemBfecLdpcUncorrectedPercent 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.26 integer32 read-only
Modem FEC load uncorrected percent
               integraXmodemBfecRsBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.27 counter64 read-only
Modem FEC load RS block counter
               integraXmodemBfecRsUncorrectedBlockCounter 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.28 counter64 read-only
Modem FEC load RS uncorrected block counter
               integraXmodemBmodulationACMmin 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.29 displaystring read-only
Minimal modulation for ACM enabled profile
               integraXmodemBmodulationACMmax 1.3.6.1.4.1.7571.100.1.1.7.10.3.2.30 displaystring read-only
Maximal modulation for ACM enabled profile
           integraXmodemBandwidth 1.3.6.1.4.1.7571.100.1.1.7.10.3.3 integer32 read-only
Signal bandwidth
           integraXmodemModulation 1.3.6.1.4.1.7571.100.1.1.7.10.3.4 displaystring read-only
Modulation (preferred)
       integraXsystem 1.3.6.1.4.1.7571.100.1.1.7.10.4
           integraXsysCPUtemperature 1.3.6.1.4.1.7571.100.1.1.7.10.4.2 fixeddiv10 read-only
System CPU temperature
           integraXsysLicenseExpire 1.3.6.1.4.1.7571.100.1.1.7.10.4.3 gauge32 read-only
License expires after number of seconds. In the case of -1, check licenseGenStatus status
           integraXsysLicenseGenStatus 1.3.6.1.4.1.7571.100.1.1.7.10.4.4 integer read-only
License General status. Enumeration: 'expired': 2, 'unlimitedTime': 4, 'ok': 1, 'unknown': 3.
           integraXsysPSUvoltage 1.3.6.1.4.1.7571.100.1.1.7.10.4.5 integer32 read-only
Power voltage in mV
           integraXsysPSUcurrent 1.3.6.1.4.1.7571.100.1.1.7.10.4.6 integer32 read-only
Power current in mA
           integraXsysPSUpower 1.3.6.1.4.1.7571.100.1.1.7.10.4.7 integer32 read-only
Power consumption in mW
           integraXsysBoardTemperature 1.3.6.1.4.1.7571.100.1.1.7.10.4.8 fixeddiv10 read-only
System temperature
           integraXsysFreeMemory 1.3.6.1.4.1.7571.100.1.1.7.10.4.9 fixeddiv10 read-only
System free memory
           integraXsysCPUidle 1.3.6.1.4.1.7571.100.1.1.7.10.4.10 fixeddiv10 read-only
System CPU idle
           integraXsysDeviceType 1.3.6.1.4.1.7571.100.1.1.7.10.4.11 displaystring read-only
Device type name
           integraXsysDeviceSerial 1.3.6.1.4.1.7571.100.1.1.7.10.4.12 displaystring read-only
Device serial number
           integraXsysDeviceProductModel 1.3.6.1.4.1.7571.100.1.1.7.10.4.13 displaystring read-only
Device product model code
           integraXsysFanError 1.3.6.1.4.1.7571.100.1.1.7.10.4.14 bits read-only
Device fan 1 and fan 2 error status Bits: 'fan1': 1, 'unknown': 3, 'fan2': 2, 'no': 0.
           integraXsysSw1v0core 1.3.6.1.4.1.7571.100.1.1.7.10.4.15 fixeddiv20 read-only
SW_1V0_CORE
           integraXsysSw1v0avdd 1.3.6.1.4.1.7571.100.1.1.7.10.4.16 fixeddiv20 read-only
SW_1V0_AVDD
           integraXsysSw1v2a 1.3.6.1.4.1.7571.100.1.1.7.10.4.17 fixeddiv20 read-only
SW_1V2A
           integraXsysSw1v5ddr 1.3.6.1.4.1.7571.100.1.1.7.10.4.18 fixeddiv20 read-only
SW_1V5_DDR
           integraXsysSw1v8 1.3.6.1.4.1.7571.100.1.1.7.10.4.19 fixeddiv20 read-only
SW_1V8
           integraXsysSw2v5 1.3.6.1.4.1.7571.100.1.1.7.10.4.20 fixeddiv20 read-only
SW_2V5
           integraXsysSw3v3 1.3.6.1.4.1.7571.100.1.1.7.10.4.21 fixeddiv20 read-only
SW_3V3
           integraXsysVttrefPs 1.3.6.1.4.1.7571.100.1.1.7.10.4.22 fixeddiv20 read-only
VTTVREF_PS
           integraXsysVttddrPs 1.3.6.1.4.1.7571.100.1.1.7.10.4.23 fixeddiv20 read-only
VTTDDR_PS
           integraXsysZq1v0 1.3.6.1.4.1.7571.100.1.1.7.10.4.24 fixeddiv20 read-only
ZQ_1V0
           integraXsysZq1v5 1.3.6.1.4.1.7571.100.1.1.7.10.4.25 fixeddiv20 read-only
ZQ_1V5
           integraXsysZq1v8 1.3.6.1.4.1.7571.100.1.1.7.10.4.26 fixeddiv20 read-only
ZQ_1V8
           integraXsysZq2v5 1.3.6.1.4.1.7571.100.1.1.7.10.4.27 fixeddiv20 read-only
ZQ_2V5
           integraXsysZq3v3 1.3.6.1.4.1.7571.100.1.1.7.10.4.28 fixeddiv20 read-only
ZQ_3V3
           integraXsys5v0d 1.3.6.1.4.1.7571.100.1.1.7.10.4.29 fixeddiv20 read-only
5V0D
           integraXsysSw1v2 1.3.6.1.4.1.7571.100.1.1.7.10.4.30 fixeddiv20 read-only
SW_1V2
           integraXsysMdmVddcAvs 1.3.6.1.4.1.7571.100.1.1.7.10.4.31 fixeddiv20 read-only
MDM_VDDC_AVS
           integraXsysMdm3v3 1.3.6.1.4.1.7571.100.1.1.7.10.4.32 fixeddiv20 read-only
MDM_3V3
           integraXsysMdm1v0aPm 1.3.6.1.4.1.7571.100.1.1.7.10.4.33 fixeddiv20 read-only
MDM_1V0A_PM
           integraXsysMdm1v0a 1.3.6.1.4.1.7571.100.1.1.7.10.4.34 fixeddiv20 read-only
MDM_1V0A
           integraXsysMdm1v8a 1.3.6.1.4.1.7571.100.1.1.7.10.4.35 fixeddiv20 read-only
MDM_1V8A
           integraXsysMdmDAC02v5a 1.3.6.1.4.1.7571.100.1.1.7.10.4.36 fixeddiv20 read-only
MDM_DAC0_2V5A
           integraXsysMdmDAC12v5 1.3.6.1.4.1.7571.100.1.1.7.10.4.37 fixeddiv20 read-only
MDM_DAC1_2V5A
           integraXsysMdmDAC22v5 1.3.6.1.4.1.7571.100.1.1.7.10.4.38 fixeddiv20 read-only
MDM_DAC2_2V5A
           integraXsysMdm1v8io 1.3.6.1.4.1.7571.100.1.1.7.10.4.39 fixeddiv20 read-only
MDM_1V8_IO
           integraXsysMdm3v3io 1.3.6.1.4.1.7571.100.1.1.7.10.4.40 fixeddiv20 read-only
MDM_3V3_IO
           integraXsys3v3Radio 1.3.6.1.4.1.7571.100.1.1.7.10.4.41 fixeddiv20 read-only
3V3_RADIO
           integraXsysMdm4v0 1.3.6.1.4.1.7571.100.1.1.7.10.4.42 fixeddiv20 read-only
MDM_4V0
           integraXsys5v0nRadio 1.3.6.1.4.1.7571.100.1.1.7.10.4.43 fixeddiv20 read-only
5V0N_RADIO
           integraXsysCoreVddSns 1.3.6.1.4.1.7571.100.1.1.7.10.4.44 fixeddiv20 read-only
CORE_VDD_SNS
           integraXsys40v0RadioSns 1.3.6.1.4.1.7571.100.1.1.7.10.4.45 fixeddiv20 read-only
40V0_RADIO_SNS
           integraXsysServices 1.3.6.1.4.1.7571.100.1.1.7.10.4.46
                 integraXsysServicesReboot 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.1 integer read-write
This object can only be set to 1. It initiates system reboot immediately. Enumeration: 'reboot': 1.
                 integraXsysServicesFtpSwitch 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.2 integer read-write
Status and on/off switch for the FTP server Enumeration: 'disabled': 1, 'unknown': 3, 'enabled': 2.
                 integraXsysServicesFwCurrInfo 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.3 displaystring read-only
Currently running FW info. Same output as in RFC1213-MIB::sysDescr.
                 integraXsysServicesFwAvailView 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.4 displaystring read-only
List FW available for installation (uploaded).
                 integraXsysServicesFwRemove 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.5 integer read-write
Remove available (uploaded) FW version. View FW versions in integraXsysServicesFwAvailView. Send number corresponding to info in integraXsysServicesFwAvailView. Enumeration: 'candfw4': 4, 'candfw5': 5, 'candfw2': 2, 'candfw3': 3, 'candfw1': 1.
                 integraXsysServicesFwRemoveAll 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.6 integer read-write
Remove all available (uploaded) FW versions. Enumeration: 'removeAllCandfw': 1.
                 integraXsysServicesFwUpload 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7 integer read-write
Upload FW (make available for installation). You need to upload a firmware to FTP ftp://anonymous@DEVICE_IP:/firmware/ first! You must have only 1 firmware in firmware folder for this option to work! This option only starts upload on the device and doesn't return success status for it. Usually you should wait some time while the device completes upload. SNMP won't response to quieries while upload is in progress. You may check integraXsysServicesFwAvailView to see if your FW is ready for install. Enumeration: 'upload': 1.
                 integraXsysServicesFwInst 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8 integer read-write
Install FW version. You need check integraXsysServicesFwAvailView to see FW versions ready for install. This option only starts installation on the device and doesn't return success status for it. Usually you should wait some time while the device completes installation. SNMP won't response to quieries while upload is in progress. If FW installation was successful, integraXsysServicesFwSwitchNext will show different FW bank value for the next boot. Enumeration: 'candfw4': 4, 'candfw5': 5, 'candfw2': 2, 'candfw3': 3, 'candfw1': 1.
                 integraXsysServicesFwSwitchRunning 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.9 integer read-only
FW running bank info. Use integraXsysServicesFwSwitchNext to view and switch FW bank for the next boot. Enumeration: 'fw1': 1, 'fw2': 2.
                 integraXsysServicesFwSwitchNext 1.3.6.1.4.1.7571.100.1.1.7.10.4.46.10 integer read-write
FW next boot bank info. Set request can change FW bank for the next boot. View running FW bank number in integraXsysServicesFwSwitchRunning. Enumeration: 'fw1': 1, 'fw2': 2.
       integraXethernet 1.3.6.1.4.1.7571.100.1.1.7.10.5
           integraXifStatusTable 1.3.6.1.4.1.7571.100.1.1.7.10.5.1 no-access
Network interface port status data.
               integraXifPortEntry 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1 no-access
An entry containing network physical port status info.
                   integraXifPortStatIndex 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                   integraXifPortStatDescr 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
                   integraXifPortType 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.3 ianaiftype read-only
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
                   integraXifPortMtu 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.4 integer32 read-only
Maximum transmission unit value in bytes.
                   integraXifPortHighSpeed 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.5 gauge32 read-only
Link speed in 1 000 000 * bits per second.
                   integraXifPortPhysAddress 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.6 physaddress read-only
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                   integraXifPortAdminStatus 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.7 integer read-only
Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received). Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
                   integraXifPortOperStatus 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.8 integer read-only
Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                   integraXifPortLastChange 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.9 timeticks read-only
This parameter value is always 0 at the moment.
                   integraXifPortAutoneg 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.10 integer read-only
Auto-negotiation status. Unknown means no info was received. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
                   integraXifPortDuplex 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.11 integer read-only
Duplex status for the interface. Enumeration: 'unknown': 3, 'full': 1, 'half': 2.
                   integraXifPortSyncEthActive 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.12 integer read-only
Synchronous Ethernet status. Can be active(1) or inactive(0). Enumeration: 'on': 1, 'off': 0.
                   integraXifPortSyncEthPrio 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.13 integer32 read-only
Synchronous Ethernet priority.
                   integraXifPortFlowControl 1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.14 integer read-only
Flow control status. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
           integraXifStatisticsTable 1.3.6.1.4.1.7571.100.1.1.7.10.5.2 no-access
Network interface port statistics data.
               integraXifPortStcEntry 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1 no-access
An entry containing network physical port statistics counter data.
                   integraXifPortStcIndex 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                   integraXifPortStcDescr 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
                   integraXifTimePassed 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.3 timeticks read-only
Statistics collection time.
                   integraXifIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.4 counter64 read-only
Packets that ingress on the port.
                   integraXifIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.5 counter64 read-only
Bytes that ingress on the port.
                   integraXifEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.6 counter64 read-only
Packets that egress on the port.
                   integraXifEgressBytes 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.7 counter64 read-only
Bytes that egress on the port.
                   integraXifEtherStatsMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.8 counter64 read-only
The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
                   integraXifEtherStatsBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.9 counter64 read-only
The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets.
                   integraXifEtherStatsPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.10 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets).
                   integraXifEtherStatsPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.11 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifEtherStatsPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.12 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifEtherStatsPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.13 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifEtherStatsPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.14 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifEtherStatsPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.15 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifEtherStatsOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.16 counter64 read-only
The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                   integraXifEtherRxOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.17 counter64 read-only
The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                   integraXifEtherTxOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.18 counter64 read-only
The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                   integraXifEtherStatsOctets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.19 counter64 read-only
Total number of octets of data (including those in bad packets) both received and transmitted.
                   integraXifEtherStatsPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.20 counter64 read-only
Total number of packets (including bad packets) both received and transmitted.
                   integraXifEtherStatsTXNoErrors 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.21 counter64 read-only
Number of packets that were transmitted without errors.
                   integraXifEtherStatsRXNoErrors 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.22 counter64 read-only
Number of packets that were received without errors.
                   integraXifEtherStatsPkts1519to1522Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.23 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifIfInOctets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.24 counter64 read-only
Total number of octets of data (including those in bad packets) that were received.
                   integraXifIfOutOctets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.25 counter64 read-only
Total number of octets of data (including those in bad packets) that were transmitted.
                   integraXifDot1dTpPortInFrames 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.26 counter64 read-only
The number of frames that have been received by this port from its segment.
                   integraXifDot1dTpPortOutFrames 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.27 counter64 read-only
The number of frames that have been transmitted by this port to its segment.
                   integraXifReceivedPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.28 counter64 read-only
Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets).
                   integraXifTransmittedPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.29 counter64 read-only
Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets).
                   integraXifReceivedPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.30 counter64 read-only
Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifTransmittedPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.31 counter64 read-only
Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifReceivedPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.32 counter64 read-only
Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifTransmittedPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.33 counter64 read-only
Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifReceivedPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.34 counter64 read-only
Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifTransmittedPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.35 counter64 read-only
Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifReceivedPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.36 counter64 read-only
Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifTransmittedPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.37 counter64 read-only
Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifReceivedPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.38 counter64 read-only
Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifTransmittedPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.39 counter64 read-only
Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                   integraXifIfInBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.40 counter64 read-only
The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets.
                   integraXifIfOutBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.41 counter64 read-only
The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets.
                   integraXifIfInMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.42 counter64 read-only
The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
                   integraXifIfOutMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.43 counter64 read-only
The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
                   integraXifDot3InPauseFrames 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.44 counter64 read-only
A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
                   integraXifDot3OutPauseFrames 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.45 counter64 read-only
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
                   integraXifEtherStatsUndersizePkts 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.46 counter64 read-only
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                   integraXifEtherStatsFragments 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47 counter64 read-only
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                   integraXifEtherStatsCRCAlignErrors 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.48 counter64 read-only
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                   integraXifEtherStatsJabbers 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                   integraXifIngressBPS 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.50 integer32 read-only
Ingoing data transfer rate in bytes per second.
                   integraXifIngressPPS 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.51 integer32 read-only
Ingoing data transfer rate in packets per second.
                   integraXifEgressBPS 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.52 integer32 read-only
Outgoing data transfer rate in bytes per second.
                   integraXifEgressPPS 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.53 integer32 read-only
Outgoing data transfer rate in packets per second.
                   integraXifAllCoSQoutPackets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.54 counter64 read-only
All CoSQ outgoing packets.
                   integraXifAllCoSQoutBytes 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.55 counter64 read-only
All CoSQ outgoing bytes.
                   integraXifAllCoSQdroppedPackets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.56 counter64 read-only
All CoSQ dropped packets.
                   integraXifAllCoSQdroppedBytes 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.57 counter64 read-only
All CoSQ dropped bytes.
                   integraXifProcessedRxPackets 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.58 counter64 read-only
Processed received packets.
                   integraXifProcessedRxBytes 1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.59 counter64 read-only
Processed received bytes.
           integraXifLspPortAdminState 1.3.6.1.4.1.7571.100.1.1.7.10.5.3 integer read-only
LSP port status. Enumeration: 'disabled': 1, 'unknown': 4, 'backup': 3, 'lsp': 2.
           integraXifLspPortList 1.3.6.1.4.1.7571.100.1.1.7.10.5.4 bits read-only
LSP port status. Bits: 'none': 0, 'lan3': 3, 'lan2': 2, 'lan1': 1.
           integraXifLspPortStatus 1.3.6.1.4.1.7571.100.1.1.7.10.5.5 integer read-only
LSP port status. Enumeration: 'lspPortOK': 1, 'unknown': 6, 'lspPortDownBlockedByLSP': 2, 'backupLinkActive': 4, 'backupNoLink': 3, 'backupLinkReady': 5.
       integraXexecuteConfig 1.3.6.1.4.1.7571.100.1.1.7.10.6 integer read-write
This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower Enumeration: 'execute': 1.
       integraXneedStore 1.3.6.1.4.1.7571.100.1.1.7.10.7 integer read-only
This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System Enumeration: 'no': 0.
       integraXstoreConfig 1.3.6.1.4.1.7571.100.1.1.7.10.8 integer read-write
This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error. Enumeration: 'store': 1.
       integraXnetCfg 1.3.6.1.4.1.7571.100.1.1.7.10.9
           integraXnetCfgIPaddress 1.3.6.1.4.1.7571.100.1.1.7.10.9.1 displaystring read-write
Local IP address
           integraXnetCfgIPmask 1.3.6.1.4.1.7571.100.1.1.7.10.9.2 displaystring read-write
Local IP mask
           integraXnetCfgIPgateway 1.3.6.1.4.1.7571.100.1.1.7.10.9.3 displaystring read-write
IP gateway Send '0' or '255.255.255.255' to clear.
           integraXnetCfgRemoteIPaddress 1.3.6.1.4.1.7571.100.1.1.7.10.9.4 displaystring read-only
Remote IP address
       integraXConformance 1.3.6.1.4.1.7571.100.1.1.7.10.10
             integraXCompliances 1.3.6.1.4.1.7571.100.1.1.7.10.10.1
                 integraXCompliance 1.3.6.1.4.1.7571.100.1.1.7.10.10.1.1
The compliance statement for SNMP engine which implements the SAF Tehnika Integra-X device.
             integraXGroups 1.3.6.1.4.1.7571.100.1.1.7.10.10.2
                 integraXMiscGroup 1.3.6.1.4.1.7571.100.1.1.7.10.10.2.1
misc data
                 integraXRadioGroup 1.3.6.1.4.1.7571.100.1.1.7.10.10.2.2
Radio group.
                 integraXModemGroup 1.3.6.1.4.1.7571.100.1.1.7.10.10.2.3
Modem group.
                 integraXSystemGroup 1.3.6.1.4.1.7571.100.1.1.7.10.10.2.4
System group.
                 integraXEthernetGeneralGroup 1.3.6.1.4.1.7571.100.1.1.7.10.10.2.5
A collection to objects, providing info applicable to all network interfaces.
                 integraXEthernetMiiPortGroup 1.3.6.1.4.1.7571.100.1.1.7.10.10.2.6
A collection of objects, providing info applicable only to MII group interfaces.