SAF-INTEGRAB-MIB: View SNMP OID List / Download MIB

VENDOR: SAF TEHNIKA


 Home MIB: SAF-INTEGRAB-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, IANAifType-MIB, SAF-ENTERPRISE, SAF-INTEGRA-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 integraB 1.3.6.1.4.1.7571.100.1.1.7.1
SAF Integra-B device management base
     integraBtimestamp 1.3.6.1.4.1.7571.100.1.1.7.1.1 dateandtime read-only
Last data update time
     integraBradio 1.3.6.1.4.1.7571.100.1.1.7.1.2
         integraBradioTxPower 1.3.6.1.4.1.7571.100.1.1.7.1.2.1 integer32 read-write
Output power of radio transmitter
         integraBradioTxFrequency 1.3.6.1.4.1.7571.100.1.1.7.1.2.2 integer32 read-write
Frequency of radio transmitter
         integraBradioRxLevel 1.3.6.1.4.1.7571.100.1.1.7.1.2.3 integer32 read-only
Level of the received signal
         integraBradioSide 1.3.6.1.4.1.7571.100.1.1.7.1.2.4 integer read-only
Radio side: Low/High Enumeration: 'high': 1, 'low': 2, 'error': 3.
         integraBradioTxMute 1.3.6.1.4.1.7571.100.1.1.7.1.2.5 integer read-only
Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable Enumeration: 'on': 1, 'off': 2, 'error': 3.
         integraBradioDuplexShift 1.3.6.1.4.1.7571.100.1.1.7.1.2.6 integer32 read-only
Utilized duplex shift in kHz
         integraBradioRxFrequency 1.3.6.1.4.1.7571.100.1.1.7.1.2.7 integer32 read-only
Frequency of radio receiver
         integraBradioTemperature 1.3.6.1.4.1.7571.100.1.1.7.1.2.8 integer32 read-only
Radio module temperature *10 Celsius
         integraBradioTxMuteDuration 1.3.6.1.4.1.7571.100.1.1.7.1.2.9 integer32 read-write
Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
         integraBradioRangesTable 1.3.6.1.4.1.7571.100.1.1.7.1.2.10 no-access
Network interface port status data.
               integraBradioRangeEntry 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1 no-access
An entry containing network physical port status info.
                   integraBradioRangeEntryIndex 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.1 integer32 read-only
A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
                   integraBradioRangeDescr 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.2 displaystring read-only
'Minimal' and 'maximal' labels
                   integraBradioRangeTxPower 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.3 integer32 read-only
Output power ranges for radio transmitter
                   integraBradioRangeTxFrequency 1.3.6.1.4.1.7571.100.1.1.7.1.2.10.1.4 integer32 read-only
Frequency ranges for radio transmitter
         integraBradioPLL 1.3.6.1.4.1.7571.100.1.1.7.1.2.11 integer read-only
PLL state of local-oscillator generator Enumeration: 'ok': 2, 'error': 1.
     integraBmodem 1.3.6.1.4.1.7571.100.1.1.7.1.3
         integraBmodemAcquireStatus 1.3.6.1.4.1.7571.100.1.1.7.1.3.1 integer read-only
This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. Enumeration: 'acquireLocked': 2, 'acquireInProgress': 1, 'acquireFailed': 3.
         integraBmodemRadialMse 1.3.6.1.4.1.7571.100.1.1.7.1.3.2 integer32 read-only
Current radial MSE value (floating point value multiplied by 10)
         integraBmodemFECload 1.3.6.1.4.1.7571.100.1.1.7.1.3.3 displaystring read-only
Decoder stress or FEC load value (floating point in textual representation)
         integraBmodemAcquireLastStatusDetails 1.3.6.1.4.1.7571.100.1.1.7.1.3.4 integer read-only
This is the last status of successfull or unsuccessful modem data acquire Enumeration: 'acquireMSEerror': 5, 'acquireLocked': 1, 'acquireSweep': 4, 'acquireSMerror': 13, 'acquireStopped': 12, 'acquireBITerror': 6.
         integraBmodemTemperature 1.3.6.1.4.1.7571.100.1.1.7.1.3.5 integer32 read-only
Modem DSP temperature *10 Celsius
         integraBmodemBandwidth 1.3.6.1.4.1.7571.100.1.1.7.1.3.6 integer32 read-only
Signal bandwidth
         integraBmodemModulation 1.3.6.1.4.1.7571.100.1.1.7.1.3.7 displaystring read-only
Modulation (preferred)
         integraBmodemRxModulation 1.3.6.1.4.1.7571.100.1.1.7.1.3.8 displaystring read-only
Current (actual) Rx Modulation
         integraBmodemTxModulation 1.3.6.1.4.1.7571.100.1.1.7.1.3.9 displaystring read-only
Current (actual) Tx Modulation
         integraBmodemRxCapacity 1.3.6.1.4.1.7571.100.1.1.7.1.3.10 integer32 read-only
Rx ethernet capacity in kilobits per second
         integraBmodemTxCapacity 1.3.6.1.4.1.7571.100.1.1.7.1.3.11 integer32 read-only
Tx ethernet capacity in kilobits per second
         integraBmodemACMengine 1.3.6.1.4.1.7571.100.1.1.7.1.3.12 integer read-only
ACM engine status Enumeration: 'disabled': 2, 'enabled': 1, 'error': 3.
         integraBmodemCarrierOffset 1.3.6.1.4.1.7571.100.1.1.7.1.3.13 integer32 read-only
Modem carrier offset
     integraBsystem 1.3.6.1.4.1.7571.100.1.1.7.1.4
         integraBsysCPUtemperature 1.3.6.1.4.1.7571.100.1.1.7.1.4.2 integer32 read-only
System CPU temperature *10 Celsius
         integraBsysLicenseExpire 1.3.6.1.4.1.7571.100.1.1.7.1.4.3 gauge32 read-only
License expires after number of seconds. In the case of -1, check licenseGenStatus status
         integraBsysLicenseGenStatus 1.3.6.1.4.1.7571.100.1.1.7.1.4.4 integer read-only
License General status. Enumeration: 'ok': 1, 'expired': 2, 'unknown': 3, 'unlimitedTime': 4.
         integraBsysPSUvoltage 1.3.6.1.4.1.7571.100.1.1.7.1.4.5 integer32 read-only
Power voltage in mV
         integraBsysPSUcurrent 1.3.6.1.4.1.7571.100.1.1.7.1.4.6 integer32 read-only
Power current in mA
         integraBsysPSUpower 1.3.6.1.4.1.7571.100.1.1.7.1.4.7 integer32 read-only
Power consumption in mW
         integraBsysBoardTemperature 1.3.6.1.4.1.7571.100.1.1.7.1.4.8 integer32 read-only
System temperature *10 Celsius
         integraBsysFreeMemory 1.3.6.1.4.1.7571.100.1.1.7.1.4.9 integer32 read-only
System free memory *10 %
         integraBsysCPUidle 1.3.6.1.4.1.7571.100.1.1.7.1.4.10 integer32 read-only
System CPU idle *10 %
     integraBethernet 1.3.6.1.4.1.7571.100.1.1.7.1.5
         integraBifStatusTable 1.3.6.1.4.1.7571.100.1.1.7.1.5.1 no-access
Network interface port status data.
             integraBifPortEntry 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1 no-access
An entry containing network physical port status info.
                 integraBifPortStatIndex 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                 integraBifPortStatDescr 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
                 integraBifPortType 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.3 ianaiftype read-only
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
                 integraBifPortMtu 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.4 integer32 read-only
Maximum transmission unit value in bytes.
                 integraBifPortSpeed 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.5 gauge32 read-only
Link speed in bits per second.
                 integraBifPortPhysAddress 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.6 physaddress read-only
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                 integraBifPortAdminStatus 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.7 integer read-only
Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received). Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
                 integraBifPortOperStatus 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.8 integer read-only
Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                 integraBifPortLastChange 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.9 timeticks read-only
This parameter value is always 0 at the moment.
                 integraBifPortAutoneg 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.10 integer read-only
Auto-negotiation status. Unknown means no info was received. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
                 integraBifPortDuplex 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.11 integer read-only
Duplex status for the interface. Enumeration: 'unknown': 3, 'full': 1, 'half': 2.
                 integraBifPortSyncEthActive 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.12 integer read-only
Synchronous Ethernet status. Can be active(1) or inactive(0). Enumeration: 'on': 1, 'off': 0.
                 integraBifPortSyncEthPrio 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.13 integer32 read-only
Synchronous Ethernet priority.
                 integraBifPortFlowControl 1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.14 integer read-only
Flow control status. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
         integraBifStatisticsTable 1.3.6.1.4.1.7571.100.1.1.7.1.5.2 no-access
Network interface port statistics data.
             integraBifPortStcEntry 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1 no-access
An entry containing network physical port statistics counter data.
                 integraBifPortStcIndex 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                 integraBifPortStcDescr 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
                 integraBifTimePassed 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.3 timeticks read-only
Statistics collection time.
                 integraBifIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.4 counter64 read-only
Packets that ingress on the port.
                 integraBifIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.5 counter64 read-only
Bytes that ingress on the port.
                 integraBifEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.6 counter64 read-only
Packets that egress on the port.
                 integraBifEgressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.7 counter64 read-only
Bytes that egress on the port.
                 integraBifEtherStatsMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.8 counter64 read-only
The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
                 integraBifEtherStatsBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.9 counter64 read-only
The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets.
                 integraBifEtherStatsPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.10 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets).
                 integraBifEtherStatsPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.11 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifEtherStatsPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.12 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifEtherStatsPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.13 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifEtherStatsPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.14 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifEtherStatsPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.15 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifEtherStatsOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.16 counter64 read-only
The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                 integraBifEtherRxOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.17 counter64 read-only
The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                 integraBifEtherTxOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.18 counter64 read-only
The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                 integraBifEtherStatsOctets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.19 counter64 read-only
Total number of octets of data (including those in bad packets) both received and transmitted.
                 integraBifEtherStatsPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.20 counter64 read-only
Total number of packets (including bad packets) both received and transmitted.
                 integraBifEtherStatsTXNoErrors 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.21 counter64 read-only
Number of packets that were transmitted without errors.
                 integraBifEtherStatsRXNoErrors 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.22 counter64 read-only
Number of packets that were received without errors.
                 integraBifEtherStatsPkts1519to1522Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.23 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifIfInOctets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.24 counter64 read-only
Total number of octets of data (including those in bad packets) that were received.
                 integraBifIfOutOctets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.25 counter64 read-only
Total number of octets of data (including those in bad packets) that were transmitted.
                 integraBifDot1dTpPortInFrames 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.26 counter64 read-only
The number of frames that have been received by this port from its segment.
                 integraBifDot1dTpPortOutFrames 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.27 counter64 read-only
The number of frames that have been transmitted by this port to its segment.
                 integraBifReceivedPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.28 counter64 read-only
Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets).
                 integraBifTransmittedPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.29 counter64 read-only
Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets).
                 integraBifReceivedPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.30 counter64 read-only
Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifTransmittedPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.31 counter64 read-only
Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifReceivedPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.32 counter64 read-only
Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifTransmittedPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.33 counter64 read-only
Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifReceivedPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.34 counter64 read-only
Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifTransmittedPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.35 counter64 read-only
Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifReceivedPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.36 counter64 read-only
Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifTransmittedPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.37 counter64 read-only
Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifReceivedPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.38 counter64 read-only
Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifTransmittedPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.39 counter64 read-only
Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraBifIfInBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.40 counter64 read-only
The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets.
                 integraBifIfOutBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.41 counter64 read-only
The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets.
                 integraBifIfInMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.42 counter64 read-only
The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
                 integraBifIfOutMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.43 counter64 read-only
The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
                 integraBifDot3InPauseFrames 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.44 counter64 read-only
A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
                 integraBifDot3OutPauseFrames 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.45 counter64 read-only
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
                 integraBifEtherStatsUndersizePkts 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.46 counter64 read-only
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                 integraBifEtherStatsFragments 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.47 counter64 read-only
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                 integraBifEtherStatsCRCAlignErrors 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.48 counter64 read-only
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                 integraBifEtherStatsJabbers 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.49 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                 integraBifIngressBPS 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.50 integer32 read-only
Ingoing data transfer rate in bytes per second.
                 integraBifIngressPPS 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.51 integer32 read-only
Ingoing data transfer rate in packets per second.
                 integraBifEgressBPS 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.52 integer32 read-only
Outgoing data transfer rate in bytes per second.
                 integraBifEgressPPS 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.53 integer32 read-only
Outgoing data transfer rate in packets per second.
                 integraBifMAClearnLimitDropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.54 counter64 read-only
MAC learn limit drop (IngressPackets).
                 integraBifL2cacheDropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.55 counter64 read-only
L2 cache drop (IngressPackets).
                 integraBifEFMdropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.56 counter64 read-only
EFM drop (IngressPackets).
                 integraBifEFMdropEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.57 counter64 read-only
EFM drop (EgressPackets).
                 integraBifSTPdropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.58 counter64 read-only
STP drop (IngressPackets).
                 integraBifSTPdropEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.59 counter64 read-only
STP drop (EgressPackets).
                 integraBifMRUdropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.60 counter64 read-only
MRU drop (IngressPackets).
                 integraBifMRUdropEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.61 counter64 read-only
MRU drop (EgressPackets).
                 integraBifFilterDropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.62 counter64 read-only
Filter drop (IngressPackets).
                 integraBifFlowClassifierDropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.63 counter64 read-only
Flow classifier drop (IngressPackets).
                 integraBifFlowClassifierDropEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.64 counter64 read-only
Flow classifier drop (EgressPackets).
                 integraBifIllegalSAdropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.65 counter64 read-only
Illegal SA drop (IngressPackets).
                 integraBifPortRateLimitDropIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.66 counter64 read-only
Port rate limit drop (IngressPackets).
                 integraBifPortRateLimitDropIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.67 counter64 read-only
Port rate limit drop (IngressBytes).
                 integraBifPausePFCframesGeneratedIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.68 counter64 read-only
PAUSE/PFC frames generated (IngressPackets).
                 integraBifPausePFCframesGeneratedEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.69 counter64 read-only
PAUSE/PFC frames generated (EgressPackets).
                 integraBifRateLimitDropForUnknownUnicastIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.70 counter64 read-only
Rate limit drop for unknown unicast (IngressPackets).
                 integraBifRateLimitDropForUnknownUnicastIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.71 counter64 read-only
Rate limit drop for unknown unicast (IngressBytes).
                 integraBifRateLimitDropForBroadcastIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.72 counter64 read-only
Rate limit drop for broadcast (IngressPackets).
                 integraBifRateLimitDropForBroadcastIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.73 counter64 read-only
Rate limit drop for broadcast (IngressBytes).
                 integraBifRateLimitDropForKnownMulticastIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.74 counter64 read-only
Rate limit drop for known multicast (IngressPackets).
                 integraBifRateLimitDropForKnownMulticastIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.75 counter64 read-only
Rate limit drop for known multicast (IngressBytes).
                 integraBifRateLimitDropForUnknownMulticastIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.76 counter64 read-only
Rate limit drop for unknown multicast (IngressPackets).
                 integraBifRateLimitDropForUnknownMulticastIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.77 counter64 read-only
Rate limit drop for unknown multicast (IngressBytes).
                 integraBifAllCoSQoutPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.78 counter64 read-only
All CoSQ outgoing packets.
                 integraBifAllCoSQoutBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.79 counter64 read-only
All CoSQ outgoing bytes.
                 integraBifAllCoSQdroppedPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.80 counter64 read-only
All CoSQ dropped packets.
                 integraBifAllCoSQdroppedBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.81 counter64 read-only
All CoSQ dropped bytes.
                 integraBifProcessedRxPackets 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.82 counter64 read-only
Processed received packets.
                 integraBifProcessedRxBytes 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.83 counter64 read-only
Processed received bytes.
         integraBifQosStatisticsTable 1.3.6.1.4.1.7571.100.1.1.7.1.5.3 no-access
Network interface QoS statistics counters.
             integraBifCosqEntry 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1 no-access
An entry containing network physical port status info.
                 integraBifCosqIfaceIndex 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                 integraBifCosqIfaceDescr 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
                 integraBifCosqStatDroppedPacketsCoSQ0 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.3 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 0 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ0 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.4 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 0 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ0 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.5 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 0 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ0 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.6 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 0 for current interface.
                 integraBifCosqStatOutPacketsCoSQ0 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.7 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 0 for current interface.
                 integraBifCosqStatOutBytesCoSQ0 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.8 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 0 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ1 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.9 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 1 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ1 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.10 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 1 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ1 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.11 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 1 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ1 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.12 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 1 for current interface.
                 integraBifCosqStatOutPacketsCoSQ1 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.13 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 1 for current interface.
                 integraBifCosqStatOutBytesCoSQ1 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.14 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 1 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ2 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.15 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 2 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ2 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.16 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 2 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ2 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.17 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 2 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ2 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.18 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 2 for current interface.
                 integraBifCosqStatOutPacketsCoSQ2 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.19 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 2 for current interface.
                 integraBifCosqStatOutBytesCoSQ2 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.20 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 2 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ3 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.21 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 3 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ3 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.22 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 3 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ3 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.23 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 3 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ3 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.24 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 3 for current interface.
                 integraBifCosqStatOutPacketsCoSQ3 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.25 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 3 for current interface.
                 integraBifCosqStatOutBytesCoSQ3 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.26 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 3 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ4 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.27 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 4 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ4 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.28 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 4 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ4 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.29 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 4 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ4 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.30 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 4 for current interface.
                 integraBifCosqStatOutPacketsCoSQ4 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.31 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 4 for current interface.
                 integraBifCosqStatOutBytesCoSQ4 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.32 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 4 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ5 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.33 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 5 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ5 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.34 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 5 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ5 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.35 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 5 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ5 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.36 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 5 for current interface.
                 integraBifCosqStatOutPacketsCoSQ5 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.37 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 5 for current interface.
                 integraBifCosqStatOutBytesCoSQ5 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.38 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 5 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ6 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.39 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 6 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ6 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.40 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 6 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ6 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.41 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 6 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ6 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.42 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 6 for current interface.
                 integraBifCosqStatOutPacketsCoSQ6 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.43 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 6 for current interface.
                 integraBifCosqStatOutBytesCoSQ6 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.44 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 6 for current interface.
                 integraBifCosqStatDroppedPacketsCoSQ7 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.45 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 7 for current interface.
                 integraBifCosqStatDroppedBytesCoSQ7 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.46 counter64 read-only
Dropped packets (bcmCosqStatDroppedPackets) counter for CoSQ 7 for current interface.
                 integraBifCosqStatGreenDiscardDroppedPacketsCoSQ7 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.47 counter64 read-only
Discarded green packets (bcmCosqStatGreenDiscardDroppedPackets) counter for CoSQ 7 for current interface.
                 integraBifCosqStatYellowDiscardDroppedPacketsCoSQ7 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.48 counter64 read-only
Discarded yellow packets (bcmCosqStatYellowDiscardDroppedPackets) counter for CoSQ 7 for current interface.
                 integraBifCosqStatOutPacketsCoSQ7 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.49 counter64 read-only
Egress packets (bcmCosqStatOutPackets) counter for CoSQ 7 for current interface.
                 integraBifCosqStatOutBytesCoSQ7 1.3.6.1.4.1.7571.100.1.1.7.1.5.3.1.50 counter64 read-only
Egress bytes (bcmCosqStatOutBytes) counter for CoSQ 7 for current interface.
     integraBexecuteConfig 1.3.6.1.4.1.7571.100.1.1.7.1.6 integer read-write
This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower Enumeration: 'execute': 1.
     integraBneedStore 1.3.6.1.4.1.7571.100.1.1.7.1.7 integer read-only
This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System Enumeration: 'no': 0.
     integraBstoreConfig 1.3.6.1.4.1.7571.100.1.1.7.1.8 integer read-write
This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error. Enumeration: 'store': 1.
     integraBnetCfg 1.3.6.1.4.1.7571.100.1.1.7.1.9
         integraBnetCfgIPaddress 1.3.6.1.4.1.7571.100.1.1.7.1.9.1 ipaddress read-write
Local IP address
         integraBnetCfgIPmask 1.3.6.1.4.1.7571.100.1.1.7.1.9.2 ipaddress read-write
Local IP mask
         integraBnetCfgIPgateway 1.3.6.1.4.1.7571.100.1.1.7.1.9.3 ipaddress read-write
IP gateway Send '0' or '255.255.255.255' to clear.
         integraBnetCfgRemoteIPaddress 1.3.6.1.4.1.7571.100.1.1.7.1.9.4 ipaddress read-only
Remote IP address
     integraBConformance 1.3.6.1.4.1.7571.100.1.1.7.1.10
           integraBCompliances 1.3.6.1.4.1.7571.100.1.1.7.1.10.1
               integraBCompliance 1.3.6.1.4.1.7571.100.1.1.7.1.10.1.1
The compliance statement for SNMP engine which implements the SAF Tehnika Integra-B device.
           integraBGroups 1.3.6.1.4.1.7571.100.1.1.7.1.10.2
               integraBMiscGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.1
misc data
               integraBRadioGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.2
Radio group.
               integraBModemGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.3
Modem group.
               integraBSystemGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.4
System group.
               integraBEthernetGeneralGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.5
A collection to objects, providing info applicable to all network interfaces.
               integraBEthernetMiiPortGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.6
A collection of objects, providing info applicable only to MII group interfaces.
               integraBEthernetQosQueueGroup 1.3.6.1.4.1.7571.100.1.1.7.1.10.2.7
A collection of objects, providing info applicable to all network interface Quality of Service (QoS) queues.