RUCKUS-ZD-WLAN-CONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: RUCKUS WIRELESS


 Home MIB: RUCKUS-ZD-WLAN-CONFIG-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, RUCKUS-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ruckusZDWLANConfigMIB 1.3.6.1.4.1.25053.1.2.2.2
Ruckus ZD WLAN Configuration mib
     ruckusZDWLANConfigObjects 1.3.6.1.4.1.25053.1.2.2.2.1
         ruckusZDWLANConfig 1.3.6.1.4.1.25053.1.2.2.2.1.1
             ruckusZDWLANConfigTable 1.3.6.1.4.1.25053.1.2.2.2.1.1.1 no-access
ZD WLAN table.
                 ruckusZDWLANConfigEntry 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1 no-access
Specifies each ZD WLAN configuration entry.
                     ruckusZDWLANID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1 integer no-access
this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048
                     ruckusZDWLANConfigSSID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2 octet string read-write
SSID for this Wireless LAN. It can't be modified after creating it.
                     ruckusZDWLANConfigDescription 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3 displaystring read-write
Description for this Wireless LAN.
                     ruckusZDWLANConfigName 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4 octet string read-write
Name for this Wireless LAN
                     ruckusZDWLANConfigWLANServiceType 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8 integer read-write
Select The the Service type for the Wireless LAN. for hotSpotService,only read-only Enumeration: 'hotSpotService': 3, 'standardUsage': 1, 'guestAccess': 2.
                     ruckusZDWLANConfigAuthentication 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10 integer read-write
Authentication method choosen for this Wireless LAN. Enumeration: 'shared': 2, 'eap-mac-mix': 5, 'open': 1, 'mac-address': 4, 'eap': 3.
                     ruckusZDWLANConfigEncryption 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12 integer read-write
Encryption method choosen for this Wireless LAN. Enumeration: 'wpa-Mixed': 3, 'wpa2': 2, 'wep-64': 4, 'none-enc': 6, 'wpa': 1, 'wep-128': 5.
                     ruckusZDWLANConfigWEPKeyIndex 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15 integer read-write
Select the WEP key index for the WEP encryption.
                     ruckusZDWLANConfigWEPKey 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16 octet string read-write
Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455
                     ruckusZDWLANConfigWPACipherType 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20 integer read-write
Enter the encryption cipher method for the WPA encryption. Enumeration: 'tkip': 1, 'auto': 3, 'aes': 2, 'none': 0.
                     ruckusZDWLANConfigWPAKey 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21 octet string read-write
Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii.
                     ruckusZDWLANConfigAuthenticationServerID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.25 integer read-write
Select the Authentication Server by the registered Server ID. This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local.
                     ruckusZDWLANConfigWirelessClientIsolation 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28 integer read-write
set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. Enumeration: 'none': 1, 'full': 3, 'local': 2.
                     ruckusZDWLANConfigZeroITActivation 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30 integer read-write
Enable the Zero IT Activation Service of the Wireless LAN or not. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusZDWLANConfigWLANHotspotID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.31 integer read-write
Select the Hotspot Server for the Wireless LAN. 0, no hotspot server; 1-32,hotspot server must exist.
                     ruckusZDWLANConfigWLANServicePriority 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32 integer read-write
Select the QOS service priority for the Wireless LAN. Enumeration: 'high': 1, 'low': 2.
                     ruckusZDWLANConfigAccountingServerID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.35 integer read-write
Select the (RADIUS) Accounting Server by the registered Server ID. 0,disable; This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting)
                     ruckusZDWLANConfigAccountingUpdateInterval 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36 integer read-write
Enter interval in minutes to update Accounting Server.
                     ruckusZDWLANConfigUplinkRate 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.40 octet string read-write
Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step. Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'
                     ruckusZDWLANConfigDownlinkRate 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.41 octet string read-write
Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step. Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'
                     ruckusZDWLANConfigIGMPSnooping 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.42 integer read-write
IGMP Snooping state of the WLAN. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusZDWLANConfigVlanID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45 integer read-write
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
                     ruckusZDWLANConfigDynamicVLAN 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.46 integer read-write
Enable the Service of the dynamic Wireless LAN or not. For 802.1x EAP + MAC Address model,'set' is not supported. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusZDWLANConfigHideSSID 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50 truthvalue read-write
Hide SSID, not to broadcast it SSID.
                     ruckusZDWLANConfigTunnelMode 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.52 truthvalue read-write
Enable Tunnel support capability for the Wireless LAN.
                     ruckusZDWLANConfigBackgroundScanning 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.53 truthvalue read-write
Select Background Scanning support capability for the Wireless LAN.
                     ruckusZDWLANConfigMaxClientsPerAP 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55 integer read-write
Select the Number of client devices the AP can service for the Wireless LAN.
                     ruckusZDWLANConfigWebAuthentication 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.60 integer read-write
Enable the Wep Authentication or not. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusZDWLANConfigRowStatus 1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.63 rowstatus read-only
Create, Delete Administration control for this Wireless LAN. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
             ruckusZDWLANGroupConfigTable 1.3.6.1.4.1.25053.1.2.2.2.1.1.2 no-access
ZD WLAN Group table.
                 ruckusZDWLANGroupConfigEntry 1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1 no-access
Specifies each ZD WLAN Group configuration entry.
                     ruckusZDWLANGroupID 1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.1 integer no-access
WLAN Group ID. It can't be modified after creating it. Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048
                     ruckusZDWLANGroupConfigName 1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.5 displaystring read-write
Name for this Wireless LAN Group
                     ruckusZDWLANGroupConfigDescription 1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.6 displaystring read-write
Description for this Wireless LAN Group.
                     ruckusZDWLANGroupVlanOverrideStatus 1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.8 truthvalue read-only
Enable Vlan Override for the Wireless LAN Group.
                     ruckusZDWLANGroupConfigRowStatus 1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.15 rowstatus read-only
Create, Delete Administration control for this Wireless LAN Group. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
             ruckusZDWLANGroupCfgAttrTable 1.3.6.1.4.1.25053.1.2.2.2.1.1.3 no-access
ZD WLAN table in WLAN group.
                 ruckusZDWLANGroupCfgAttrEntry 1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1 no-access
Specifies each ZD WLAN configuration entry.
                     ruckusZDWLANGroupCfgAttrOverrideType 1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.3 integer read-write
WLAN group vlan Override Type. Enumeration: 'nochange': 1, 'tag': 2.
                     ruckusZDWLANGroupCfgAttrWGVlanTag 1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.4 integer read-write
WLAN group vlan tag. for set , range is :1-4094. for get , range is :0-4094: 1: If VLAN ID is 1, packets from this WLAN will be untagged; 0: for node ruckusZDWLANGroupCfgAttrOverrideType is nochange
                     ruckusZDWLANGroupCfgAttrRowStatus 1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.10 rowstatus read-only
Create, Delete Administration control for this Wireless LAN group attr. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
             ruckusZDHotspotConfigTable 1.3.6.1.4.1.25053.1.2.2.2.1.1.8 no-access
ZD Hotspot table.
                 ruckusZDHotspotConfigEntry 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1 no-access
Specifies each ZD Hotspot configuration entry.
                     ruckusZDHotspotID 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.1 integer no-access
Hotspot ID.
                     ruckusZDHotspotName 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.2 displaystring read-write
Name for this Hotspot.Can't be modified if created.
                     ruckusZDHotspotRedirectLoginPage 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.3 displaystring read-write
Redirect unauthenticated user to this for authentication. It is URL or IPaddress.
                     ruckusZDHotspotRedirectStartURL 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.4 displaystring read-write
After user is authenticated, redirect to this URL if the redirect type is url.
                     ruckusZDHotspotRedirectType 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.6 integer read-write
To decide the redirect target. If it is user, redirect to the user intends to visit. Enumeration: 'url': 2, 'user': 1.
                     ruckusZDHotspotRowStatus 1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.15 rowstatus read-only
Create, Delete Administration control for this Hotspot.