RUCKUS-SCG-CONFIG-WLAN-MIB: View SNMP OID List / Download MIB

VENDOR: RUCKUS WIRELESS


 Home MIB: RUCKUS-SCG-CONFIG-WLAN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, IANAifType-MIB, RUCKUS-TC-MIB, SNMPv2-TC, IPV6-TC, RUCKUS-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ruckusSCGConfigWLANMIB 1.3.6.1.4.1.25053.1.3.2.2
Ruckus WLAN mib
     ruckusSCGConfigWLANObjects 1.3.6.1.4.1.25053.1.3.2.2.1
         ruckusSCGConfigWLAN 1.3.6.1.4.1.25053.1.3.2.2.1.1
             ruckusSCGConfigWLANTable 1.3.6.1.4.1.25053.1.3.2.2.1.1.1 no-access
SCG WLAN table.
                 ruckusSCGConfigWLANEntry 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1 no-access
Specifies each SCG WLAN configuration entry.
                     ruckusSCGConfigWLANID 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.1 integer read-only
this Wireless LAN(WLAN) ID
                     ruckusSCGConfigWLANSSID 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.2 octet string read-only
SSID for this Wireless LAN.
                     ruckusSCGConfigWLANDescription 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.3 displaystring read-write
Description for this Wireless LAN.
                     ruckusSCGConfigWLANName 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.4 octet string read-only
Name for this Wireless LAN
                     ruckusSCGZoneName 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.5 octet string read-only
Zone name for this wlan
                     ruckusSCGConfigWLANWLANServiceType 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.8 integer read-only
The the Service type for the Wireless LAN. Enumeration: 'hotspot20': 5, 'standardUsage': 1, 'hotspot': 2, 'webauth': 4, 'hotspot20-osen': 6, 'guest': 3.
                     ruckusSCGConfigWLANAuthentication 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.10 integer read-only
Authentication method choosen for this Wireless LAN. Enumeration: 'eap': 2, 'open': 1, 'mac-address': 3.
                     ruckusSCGConfigWLANEncryption 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.12 integer read-write
Encryption method choosen for this Wireless LAN. Enumeration: 'none-enc': 5, 'wep-128': 4, 'wpa2': 1, 'wep-64': 3, 'wpa-Mixed': 2.
                     ruckusSCGConfigWLANWEPKeyIndex 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.15 integer read-write
Select the WEP key index for the WEP encryption. for 802.1x wlan(eap), this node should not be set.
                     ruckusSCGConfigWLANWEPKey 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.16 octet string read-write
Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455. for 802.1x wlan(eap), this node should not be set.
                     ruckusSCGConfigWLANWPACipherType 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.20 integer read-write
Enter the encryption cipher method for the WPA encryption. fpr WPA2,aes is only supported.null is only for read. Enumeration: 'aes': 1, 'null': 3, 'tkipaes': 2.
                     ruckusSCGConfigWLANWPAKey 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.21 octet string read-write
Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii. for 802.1x wlan(eap), this node should not be set.
                     ruckusSCGConfigWLANWirelessClientIsolation 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.28 integer read-write
set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. for Guest and webauth WLAN type, it must be 'enable'. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusSCGConfigWLANZeroITActivation 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.30 integer read-write
Enable the Zero IT Activation Service of the Wireless LAN or not. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusSCGConfigWLANServicePriority 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.32 integer read-write
Select the QOS service priority for the Wireless LAN. Enumeration: 'high': 1, 'low': 2.
                     ruckusSCGConfigWLANAccountingUpdateInterval 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.36 integer read-write
Enter interval in minutes to update Accounting Server.
                     ruckusSCGConfigWLANVlanID 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.45 integer read-write
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
                     ruckusSCGConfigWLANHideSSID 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.50 integer read-write
Hide SSID, not to broadcast it SSID. Enumeration: 'enable': 1, 'disable': 2.
                     ruckusSCGConfigWLANMaxClientsPerAP 1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.55 integer read-write
Select the Number of client devices the AP can service for the Wireless LAN.