RSERPOOL-MIB: View SNMP OID List / Download MIB
VENDOR: INTERNET-STANDARD
| Home | MIB: RSERPOOL-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| rserpoolMIB | 1.3.6.1.3.125 |
The MIB module for managing an RSerPool implementation. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5525; see the RFC itself for full legal notices. |
||
| rserpoolMIBObjects | 1.3.6.1.3.125.1 | |||
| rserpoolENRPServers | 1.3.6.1.3.125.1.1 | |||
| rserpoolENRPTable | 1.3.6.1.3.125.1.1.1 | no-access |
The table listing of ENRP servers. |
|
| 1.3.6.1.3.125.1.1.1.1 | no-access |
An ENRP server entry in the table listing of ENRP servers. |
||
| rserpoolENRPIndex | 1.3.6.1.3.125.1.1.1.1.1 | unsigned32 | no-access |
An integer to uniquely identify an ENRP server. |
| rserpoolENRPOperationScope | 1.3.6.1.3.125.1.1.1.1.2 | rserpooloperationscopetc | read-only |
The definition of the operation scope of this ENRP server. |
| rserpoolENRPIdentifier | 1.3.6.1.3.125.1.1.1.1.3 | rserpoolenrpserveridentifiertc | read-only |
The ENRP server identifier of this ENRP server. |
| rserpoolENRPDescription | 1.3.6.1.3.125.1.1.1.1.4 | octet string | read-write |
A textual description of this ENRP server, e.g., its location and a contact address of its administrator. This object SHOULD be maintained in a persistent manner. |
| rserpoolENRPUptime | 1.3.6.1.3.125.1.1.1.1.5 | timeticks | read-only |
The ENRP service uptime of this ENRP server. |
| rserpoolENRPPort | 1.3.6.1.3.125.1.1.1.1.6 | inetportnumber | read-only |
The Stream Control Transmission Protocol (SCTP) port number of the ENRP protocol endpoint of this ENRP server. |
| rserpoolENRPASAPAnnouncePort | 1.3.6.1.3.125.1.1.1.1.7 | inetportnumber | read-only |
The destination UDP port number to which ASAP multicast announce messages are sent. |
| rserpoolENRPASAPAnnounceAddrType | 1.3.6.1.3.125.1.1.1.1.8 | inetaddresstype | read-only |
The network-layer protocol over which ASAP multicast announce messages are sent. Enumeration: 'ipv4': 1, 'ipv6': 2. |
| rserpoolENRPASAPAnnounceAddr | 1.3.6.1.3.125.1.1.1.1.9 | inetaddress | read-only |
The destination IP multicast address to which ASAP multicast announce messages are sent. The type of this address is given in rserpoolENRPASAPAnnounceAddrType. |
| rserpoolENRPENRPAnnouncePort | 1.3.6.1.3.125.1.1.1.1.10 | inetportnumber | read-only |
The destination UDP port number to which ENRP multicast announce messages are sent. |
| rserpoolENRPENRPAnnounceAddrType | 1.3.6.1.3.125.1.1.1.1.11 | inetaddresstype | read-only |
The network-layer protocol over which ENRP multicast announce messages are sent. Enumeration: 'ipv4': 1, 'ipv6': 2. |
| rserpoolENRPENRPAnnounceAddr | 1.3.6.1.3.125.1.1.1.1.12 | inetaddress | read-only |
The destination multicast IP address to which ENRP multicast announce messages are sent. The type of this address is given in rserpoolENRPENRPAnnounceAddrType. |
| rserpoolENRPPoolTable | 1.3.6.1.3.125.1.1.3 | no-access |
The table listing of pools. |
|
| 1.3.6.1.3.125.1.1.3.1 | no-access |
The pool entry in the table listing of pools. |
||
| rserpoolENRPPoolIndex | 1.3.6.1.3.125.1.1.3.1.1 | unsigned32 | no-access |
An integer to uniquely identify a pool. |
| rserpoolENRPPoolHandle | 1.3.6.1.3.125.1.1.3.1.2 | rserpoolpoolhandletc | read-only |
The pool handle of this pool. |
| rserpoolENRPPoolElementTable | 1.3.6.1.3.125.1.1.4 | no-access |
The table listing of pool elements. |
|
| 1.3.6.1.3.125.1.1.4.1 | no-access |
A pool element in the table listing of pool elements. |
||
| rserpoolENRPPoolElementIndex | 1.3.6.1.3.125.1.1.4.1.1 | unsigned32 | no-access |
An integer to uniquely identify a pool element. Note, that uniqueness of a pool element identifier in the pool is not enforced; therefore, this index is required here! |
| rserpoolENRPPoolElementID | 1.3.6.1.3.125.1.1.4.1.2 | rserpoolpoolelementidentifiertc | read-only |
The pool element identifier of this pool element. |
| rserpoolENRPASAPTransportPort | 1.3.6.1.3.125.1.1.4.1.3 | inetportnumber | read-only |
The SCTP port number of the ASAP endpoint of this pool element. |
| rserpoolENRPUserTransportProto | 1.3.6.1.3.125.1.1.4.1.4 | unsigned32 | read-only |
The transport protocol number of the service endpoint of this pool element. |
| rserpoolENRPUserTransportPort | 1.3.6.1.3.125.1.1.4.1.5 | inetportnumber | read-only |
The transport protocol's port number of the service endpoint of this pool element. |
| rserpoolENRPUserTransportUse | 1.3.6.1.3.125.1.1.4.1.6 | rserpooltransportusetypetc | read-only |
The transport use of the service endpoint of this pool element. |
| rserpoolENRPPolicyID | 1.3.6.1.3.125.1.1.4.1.7 | rserpoolpolicyidentifiertc | read-only |
The pool policy of this pool element. |
| rserpoolENRPPolicyDescription | 1.3.6.1.3.125.1.1.4.1.8 | octet string | read-only |
The textual description of the pool policy of this pool element. |
| rserpoolENRPPolicyWeight | 1.3.6.1.3.125.1.1.4.1.9 | rserpoolpolicyweighttc | read-only |
The pool policy's weight parameter for this pool element. |
| rserpoolENRPPolicyLoad | 1.3.6.1.3.125.1.1.4.1.10 | rserpoolpolicyloadtc | read-only |
The pool policy's load status for this pool element. |
| rserpoolENRPPolicyLoadDeg | 1.3.6.1.3.125.1.1.4.1.11 | rserpoolpolicyloadtc | read-only |
The pool policy's load degradation parameter for this pool element. |
| rserpoolENRPRegistrationLife | 1.3.6.1.3.125.1.1.4.1.12 | timeticks | read-only |
The registration life of this pool element. |
| rserpoolENRPHomeENRPServer | 1.3.6.1.3.125.1.1.4.1.13 | rserpoolenrpserveridentifiertc | read-only |
The ID of the Home ENRP server of this pool element. |
| rserpoolENRPASAPAddrTable | 1.3.6.1.3.125.1.1.5 | no-access |
A table listing of all IP addresses of the ASAP transport endpoint. |
|
| 1.3.6.1.3.125.1.1.5.1 | no-access |
An IP address of the ASAP transport endpoint. |
||
| rserpoolENRPASAPAddrTableIndex | 1.3.6.1.3.125.1.1.5.1.1 | unsigned32 | no-access |
A unique identifier for the IP address of an ASAP transport endpoint. |
| rserpoolENRPASAPL3Type | 1.3.6.1.3.125.1.1.5.1.2 | inetaddresstype | read-only |
The network-layer protocol (IPv4 or IPv6) of an IP address of an ASAP transport endpoint. Enumeration: 'ipv4': 1, 'ipv6': 2. |
| rserpoolENRPASAPL3Addr | 1.3.6.1.3.125.1.1.5.1.3 | inetaddress | read-only |
The IP address of an ASAP transport endpoint. The type of this address is given in rserpoolENRPASAPL3Type. |
| rserpoolENRPUserAddrTable | 1.3.6.1.3.125.1.1.6 | no-access |
A table listing of all IP addresses of the user transport endpoint. |
|
| 1.3.6.1.3.125.1.1.6.1 | no-access |
An IP address of the user transport endpoint. |
||
| rserpoolENRPUserAddrTableIndex | 1.3.6.1.3.125.1.1.6.1.1 | unsigned32 | no-access |
A unique identifier for the IP address of a user transport endpoint. |
| rserpoolENRPUserL3Type | 1.3.6.1.3.125.1.1.6.1.2 | inetaddresstype | read-only |
The network-layer protocol (IPv4 or IPv6) of an IP address of a user transport endpoint. Set to unknown for an opaque address. Enumeration: 'unknown': 0, 'ipv4': 1, 'ipv6': 2. |
| rserpoolENRPUserL3Addr | 1.3.6.1.3.125.1.1.6.1.3 | inetaddress | read-only |
The IP address of a user transport endpoint. The type of this address is given in rserpoolENRPUserL3Type. |
| rserpoolENRPUserL3Opaque | 1.3.6.1.3.125.1.1.6.1.4 | rserpoolopaqueaddresstc | read-only |
The opaque address of a user transport endpoint. |
| rserpoolENRPENRPAddrTable | 1.3.6.1.3.125.1.1.7 | no-access |
A table listing of all IP addresses of the ENRP transport endpoint. |
|
| 1.3.6.1.3.125.1.1.7.1 | no-access |
An IP address of the ENRP transport endpoint. |
||
| rserpoolENRPENRPAddrTableIndex | 1.3.6.1.3.125.1.1.7.1.1 | unsigned32 | no-access |
A unique identifier for the IP address of an ENRP transport endpoint. |
| rserpoolENRPENRPL3Type | 1.3.6.1.3.125.1.1.7.1.2 | inetaddresstype | read-only |
The network-layer protocol (IPv4 or IPv6) of an IP address of an ENRP transport endpoint. Enumeration: 'ipv4': 1, 'ipv6': 2. |
| rserpoolENRPENRPL3Addr | 1.3.6.1.3.125.1.1.7.1.3 | inetaddress | read-only |
The IP address of an ENRP transport endpoint. The type of this address is given in rserpoolENRPENRPL3Type. |
| rserpoolENRPPeerTable | 1.3.6.1.3.125.1.1.8 | no-access |
The table listing of a peer table. |
|
| 1.3.6.1.3.125.1.1.8.1 | no-access |
A peer entry in the table listing of a peer table. |
||
| rserpoolENRPPeerIndex | 1.3.6.1.3.125.1.1.8.1.1 | unsigned32 | no-access |
A unique identifier for a peer entry in the table listing of a peer table. |
| rserpoolENRPPeerIdentifier | 1.3.6.1.3.125.1.1.8.1.2 | rserpoolenrpserveridentifiertc | read-only |
The ENRP identifier of this peer. |
| rserpoolENRPPeerPort | 1.3.6.1.3.125.1.1.8.1.3 | inetportnumber | read-only |
The SCTP port number of the ENRP transport endpoint of this peer. |
| rserpoolENRPPeerLastHeard | 1.3.6.1.3.125.1.1.8.1.4 | timeticks | read-only |
The time since the reception of the last ENRP Presence message of this peer. |
| rserpoolENRPPeerAddrTable | 1.3.6.1.3.125.1.1.9 | no-access |
A table listing of the peer endpoint addresses. |
|
| 1.3.6.1.3.125.1.1.9.1 | no-access |
A table listing of all IP addresses of the ENRP transport endpoint of a peer referenced by rserpoolENRPPeerIndex. |
||
| rserpoolENRPPeerAddrTableIndex | 1.3.6.1.3.125.1.1.9.1.1 | unsigned32 | no-access |
A unique identifier for the IP address of a peer ENRP transport endpoint. |
| rserpoolENRPPeerL3Type | 1.3.6.1.3.125.1.1.9.1.2 | inetaddresstype | read-only |
The network-layer protocol (IPv4 or IPv6) of an IP address of a peer ENRP transport endpoint. Enumeration: 'ipv4': 1, 'ipv6': 2. |
| rserpoolENRPPeerL3Addr | 1.3.6.1.3.125.1.1.9.1.3 | inetaddress | read-only |
The IP address of a peer ENRP transport endpoint. The type of this address is given in rserpoolENRPPeerL3Type. |
| rserpoolPoolElements | 1.3.6.1.3.125.1.2 | |||
| rserpoolPETable | 1.3.6.1.3.125.1.2.1 | no-access |
The table listing of pool elements. |
|
| 1.3.6.1.3.125.1.2.1.1 | no-access |
A pool element in the table listing of pool elements. |
||
| rserpoolPEIndex | 1.3.6.1.3.125.1.2.1.1.1 | unsigned32 | no-access |
An integer to uniquely identify a pool element. Note, that uniqueness of a pool element identifier in the pool is not enforced; therefore, this index is required here! |
| rserpoolPEOperationScope | 1.3.6.1.3.125.1.2.1.1.2 | rserpooloperationscopetc | read-only |
The operation scope of this pool element. |
| rserpoolPEPoolHandle | 1.3.6.1.3.125.1.2.1.1.3 | rserpoolpoolhandletc | read-write |
The pool handle of this pool element. Changing this object will update the pool element's pool handle and result in a re-registration. This object SHOULD be maintained in a persistent manner. |
| rserpoolPEIdentifier | 1.3.6.1.3.125.1.2.1.1.4 | rserpoolpoolelementidentifiertc | read-only |
The pool element identifier of this pool element. |
| rserpoolPEDescription | 1.3.6.1.3.125.1.2.1.1.5 | octet string | read-write |
A textual description of this pool element, e.g., its location and a contact address of its administrator. This object SHOULD be maintained in a persistent manner. |
| rserpoolPEUptime | 1.3.6.1.3.125.1.2.1.1.6 | timeticks | read-only |
The ENRP service uptime of this pool element. |
| rserpoolPEASAPTransportPort | 1.3.6.1.3.125.1.2.1.1.7 | inetportnumber | read-only |
The SCTP port number of the ASAP endpoint of this pool element. |
| rserpoolPEUserTransportProto | 1.3.6.1.3.125.1.2.1.1.8 | unsigned32 | read-only |
The transport protocol number of the service endpoint of this pool element. |
| rserpoolPEUserTransportPort | 1.3.6.1.3.125.1.2.1.1.9 | inetportnumber | read-only |
The transport protocol's port number of the service endpoint of this pool element. |
| rserpoolPEUserTransportUse | 1.3.6.1.3.125.1.2.1.1.10 | rserpooltransportusetypetc | read-only |
The transport use of the service endpoint of this pool element. |
| rserpoolPEPolicyID | 1.3.6.1.3.125.1.2.1.1.11 | rserpoolpolicyidentifiertc | read-write |
The pool policy of this pool element. Changing this object will update the pool element's policy and result in a re-registration. This object SHOULD be maintained in a persistent manner. |
| rserpoolPEPolicyDescription | 1.3.6.1.3.125.1.2.1.1.12 | octet string | read-write |
The textual description of the pool policy of this pool element. This object SHOULD be maintained in a persistent manner. |
| rserpoolPEPolicyWeight | 1.3.6.1.3.125.1.2.1.1.13 | rserpoolpolicyweighttc | read-write |
The pool policy's weight parameter for this pool element. Changing this object will update the pool element's policy weight setting and result in a re-registration. This object SHOULD be maintained in a persistent manner. |
| rserpoolPEPolicyLoad | 1.3.6.1.3.125.1.2.1.1.14 | rserpoolpolicyloadtc | read-only |
The pool policy's load status for this pool element. |
| rserpoolPEPolicyLoadDeg | 1.3.6.1.3.125.1.2.1.1.15 | rserpoolpolicyloadtc | read-write |
The pool policy's load degradation parameter for this pool element. Changing this object will update the pool element's load degradation setting and result in a re-registration. This object SHOULD be maintained in a persistent manner. |
| rserpoolPERegistrationLife | 1.3.6.1.3.125.1.2.1.1.16 | timeticks | read-write |
The registration life of this pool element. Changing this object will update the pool element's lifetime setting and result in a re-registration. This object SHOULD be maintained in a persistent manner. |
| rserpoolPEHomeENRPServer | 1.3.6.1.3.125.1.2.1.1.17 | rserpoolenrpserveridentifiertc | read-only |
The ID of the Home ENRP server of this pool element. |
| rserpoolPEASAPAddrTable | 1.3.6.1.3.125.1.2.2 | no-access |
A table listing of all IP addresses of the ASAP transport endpoint. |
|
| 1.3.6.1.3.125.1.2.2.1 | no-access |
An IP address of the ASAP transport endpoint. |
||
| rserpoolPEASAPAddrTableIndex | 1.3.6.1.3.125.1.2.2.1.1 | unsigned32 | no-access |
A unique identifier for the IP address of an ASAP transport endpoint. |
| rserpoolPEASAPL3Type | 1.3.6.1.3.125.1.2.2.1.2 | inetaddresstype | read-only |
The network-layer protocol (IPv4 or IPv6) of an IP address of an ASAP transport endpoint. Enumeration: 'ipv4': 1, 'ipv6': 2. |
| rserpoolPEASAPL3Addr | 1.3.6.1.3.125.1.2.2.1.3 | inetaddress | read-only |
The IP address of an ASAP transport endpoint. The type of this address is given in rserpoolPEASAPL3Type. |
| rserpoolPEUserAddrTable | 1.3.6.1.3.125.1.2.6 | no-access |
A table listing of all IP addresses of the user transport endpoint. |
|
| 1.3.6.1.3.125.1.2.6.1 | no-access |
An IP address of the user transport endpoint. |
||
| rserpoolPEUserAddrTableIndex | 1.3.6.1.3.125.1.2.6.1.1 | unsigned32 | no-access |
A unique identifier for the IP address of a user transport endpoint. |
| rserpoolPEUserL3Type | 1.3.6.1.3.125.1.2.6.1.2 | inetaddresstype | read-only |
The network-layer protocol of an IP address of a user transport endpoint. Set to unknown for opaque address. Enumeration: 'unknown': 0, 'ipv4': 1, 'ipv6': 2. |
| rserpoolPEUserL3Addr | 1.3.6.1.3.125.1.2.6.1.3 | inetaddress | read-only |
The IP address of a user transport endpoint. The type of this address is given in rserpoolPEUserL3Addr. |
| rserpoolPEUserL3Opaque | 1.3.6.1.3.125.1.2.6.1.4 | rserpoolopaqueaddresstc | read-only |
The opaque address of a user transport endpoint. |
| rserpoolPoolUsers | 1.3.6.1.3.125.1.3 | |||
| rserpoolPUTable | 1.3.6.1.3.125.1.3.1 | no-access |
The table listing of pool users. |
|
| 1.3.6.1.3.125.1.3.1.1 | no-access |
A pool user in the table listing of pool users. |
||
| rserpoolPUIndex | 1.3.6.1.3.125.1.3.1.1.1 | unsigned32 | no-access |
An integer to uniquely identify a pool user. |
| rserpoolPUOperationScope | 1.3.6.1.3.125.1.3.1.1.2 | rserpooloperationscopetc | read-only |
The operation scope of this pool user. |
| rserpoolPUPoolHandle | 1.3.6.1.3.125.1.3.1.1.3 | rserpoolpoolhandletc | read-write |
The pool handle of this pool user. Changing this object will update the pool user's pool handle for all future sessions. This object SHOULD be maintained in a persistent manner. |
| rserpoolPUDescription | 1.3.6.1.3.125.1.3.1.1.4 | octet string | read-write |
A textual description of this pool user, e.g., its location and a contact address of its administrator. This object SHOULD be maintained in a persistent manner. |
| rserpoolPUUptime | 1.3.6.1.3.125.1.3.1.1.5 | timeticks | read-only |
The ENRP service uptime of this pool user. |
| rserpoolMIBConformance | 1.3.6.1.3.125.2 | |||
| rserpoolMIBCompliances | 1.3.6.1.3.125.2.1 | |||
| rserpoolMIBCompliance | 1.3.6.1.3.125.2.1.1 |
The compliance statement for SNMP entities that implement RSerPool. |
||
| rserpoolMIBGroups | 1.3.6.1.3.125.2.2 | |||
| rserpoolENRPGroup | 1.3.6.1.3.125.2.2.1 |
The group contains all ENRP server instances running on the system |
||
| rserpoolPEGroup | 1.3.6.1.3.125.2.2.2 |
The group contains all pool element instances running on the system |
||
| rserpoolPUGroup | 1.3.6.1.3.125.2.2.3 |
The group contains all pool user instances running on the system |
||