RIVERSTONE-PING-EXTENSIONS-MIB: View SNMP OID List / Download MIB

VENDOR: RIVERSTONE NETWORKS


 Home MIB: RIVERSTONE-PING-EXTENSIONS-MIB
Download as:   
MPLS-TE-MIB, DISMAN-PING-MIB, RIVERSTONE-SMI-MIB, RIVERSTONE-TC-MIB, SNMPv2-SMI, SNMPv2-CONF, ATM-TC-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rsPingExtensionsMIB 1.3.6.1.4.1.5567.2.55
This module extends the pingMIB defined in RFC2925.
       rsPingObjects 1.3.6.1.4.1.5567.2.55.1
           rsPingAtmCtlTable 1.3.6.1.4.1.5567.2.55.1.1 no-access
Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host.
               rsPingAtmCtlEntry 1.3.6.1.4.1.5567.2.55.1.1.1 no-access
Defines an entry in the rsPingAtmCtlTable. The first index element pingCtlOwnerIndex isdefined in RFC2925. The second index pingCtlTestName is also defined in RFC2925.
                   rsPingAtmCtlPort 1.3.6.1.4.1.5567.2.55.1.1.1.1 unsigned32 read-only
This indicates the system port of the virtual circuit that the OAM loopback cells would go out.
                   rsPingAtmCtlVpi 1.3.6.1.4.1.5567.2.55.1.1.1.2 atmvpidentifier read-only
This indicates the VPI of the virtual circuit that the OAM loopback cells would go out.
                   rsPingAtmCtlVci 1.3.6.1.4.1.5567.2.55.1.1.1.3 atmvcidentifier read-only
This indicates the VCI of the virtual circuit that the OAM loopback cells would go out. If this circuit is switched by VPI(F4), this object would only take in 3 or 4 for segment or endToTnd respectively to indicate its flow type.
                   rsPingAtmCtlFlowType 1.3.6.1.4.1.5567.2.55.1.1.1.4 rsatmoamflowtype read-only
This indicates to the switch to send ATM OAM segment loopback or endToEnd loopback cells. This object only applies when the flow level is F5. For F4 circuit, set the VCI to 3 for segment and 4 for endToEnd.
                   rsPingAtmCtlLocationID 1.3.6.1.4.1.5567.2.55.1.1.1.5 rsatmoamlocationid read-only
This object only applies if the flow type is segment. Use this object to identify which ATM network node in the circuit would the segment loopback occur. The default value of all 1s indicate the end of the circuit. For segment flows, this is the last network node. For endToEnd flows, this is the CPE.
           rsPingEtherOamCtlTable 1.3.6.1.4.1.5567.2.55.1.5 no-access
Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by L2 MAC address. Restrictions: Following objects of pingCtlEntry are not used when pingCtlType is of rsPingEthernetOAM. pingCtlTargetAddress, pingCtlTargetAddressType, pingCtlSourceAddressType, pingCtlSourceAddress, pingCtlByPassRouteTable, pingCtlDSField pingCtlIfIndex will only takes values When its ifType value is any one of these ethernetCsmacd(6), propMultiplexor(54)
               rsPingEtherOamCtlEntry 1.3.6.1.4.1.5567.2.55.1.5.1 no-access
Defines an entry in the rsPingEtherOamCtlTable. The index elements pingCtlOwnerIndex and pngCtlTestName are defined in RFC2925.
                   rsPingEtherOamCtlTargetAddress 1.3.6.1.4.1.5567.2.55.1.5.1.1 macaddress read-only
Specifies the host L2 MAC address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its corresponding pingCtlEntry to active(1) via pingCtlRowStatus. This object essentially replaces pingCtlTargetAddressType and pingCtrTArgetAddress in pingCtrlTable.
                   rsPingEtherOamCtlVlanId 1.3.6.1.4.1.5567.2.55.1.5.1.2 vlanindex read-only
Vlan in which the frames will be transmitted.
                   rsPingEtherOamCtlPriority 1.3.6.1.4.1.5567.2.55.1.5.1.3 unsigned32 read-only
802.1p priority value.
                   rsPingEtherOamCtlContextId 1.3.6.1.4.1.5567.2.55.1.5.1.4 rscontextid read-only
Context Id in which the OAM frames will be transmitted.
           rsPingLspLdpCtlTable 1.3.6.1.4.1.5567.2.55.1.6 no-access
Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by LSP-LDP FEC.
               rsPingLspLdpCtlEntry 1.3.6.1.4.1.5567.2.55.1.6.1 no-access
Defines an entry in the rsPingLspLdpCtlTable. The index elements pingCtlOwnerIndex and pngCtlTestName are defined in RFC2925.
                   rsPingLspLdpCtlTgtMaskLen 1.3.6.1.4.1.5567.2.55.1.6.1.1 unsigned32 read-only
Specifies the host mask in number of consecutive bits to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its corresponding pingCtlEntry to active(1) via pingCtlRowStatus.
           rsPingLspRsvpCtlTable 1.3.6.1.4.1.5567.2.55.1.7 no-access
Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by LSP-RSVP Tunnel Id.
               rsPingLspRsvpCtlEntry 1.3.6.1.4.1.5567.2.55.1.7.1 no-access
Defines an entry in the rsPingLspRsvpCtlTable. The index elements pingCtlOwnerIndex and pingCtlTestName are defined in RFC2925.
                   rsPingLspRsvpCtlTgtTunnelId 1.3.6.1.4.1.5567.2.55.1.7.1.1 mplstunnelindex read-only
Specifies the target tunnel Id to be used at a remote host for performing a ping operation. This object essentially replaces pingCtlTargetAddressType and pingCtrTArgetAddress in pingCtrlTable.
           rsPingHVplsCtlTable 1.3.6.1.4.1.5567.2.55.1.8 no-access
Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by L2 MAC address on a (h)vpls network.
               rsPingHVplsCtlEntry 1.3.6.1.4.1.5567.2.55.1.8.1 no-access
Defines an entry in the rsPingHVplsCtlTable. The index elements pingCtlOwnerIndex and pingCtlTestName are defined in RFC2925.
                   rsPingHVplsCtlTgtAddress 1.3.6.1.4.1.5567.2.55.1.8.1.1 macaddress read-only
Specifies the host L2 MAC address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its corresponding pingCtlEntry to active(1) via pingCtlRowStatus. This object essentially replaces pingCtlTargetAddressType and pingCtrTArgetAddress in pingCtrlTable.
                   rsPingHVplsCtlVlanId 1.3.6.1.4.1.5567.2.55.1.8.1.2 vlanindex read-only
Vlan Id in which the OAM frames will be transmitted.
                   rsPingHVplsCtlContextId 1.3.6.1.4.1.5567.2.55.1.8.1.3 rscontextid read-only
Context Id in which the OAM frames will be transmitted.
                   rsPingHVplsCtlDirection 1.3.6.1.4.1.5567.2.55.1.8.1.4 rsdirection read-only
Direction of ping on a HVPLS network.
                   rsPingHVplsCtlDomains 1.3.6.1.4.1.5567.2.55.1.8.1.5 rsdomainlist read-only
List of domains for a (H)VPLS network.
                   rsPingHVplsCtlPriority 1.3.6.1.4.1.5567.2.55.1.8.1.6 unsigned32 read-only
802.1p priority value.
       rsPingConformance 1.3.6.1.4.1.5567.2.55.2
           rsPingCompliances 1.3.6.1.4.1.5567.2.55.2.1
               rsPingCompliance 1.3.6.1.4.1.5567.2.55.2.1.1
The compliance statement for RIVERSTONE-PING-EXTENSIONS-MIB.
           rsPingGroups 1.3.6.1.4.1.5567.2.55.2.2
               rsPingAtmCtlGroup 1.3.6.1.4.1.5567.2.55.2.2.1
The group of objects that are needed for ATM OAM ping.
               rsPingEtherOamCtlGroup 1.3.6.1.4.1.5567.2.55.2.2.5
The group of objects that are needed for Ethernet OAM ping.
               rsPingLspLdpCtlGroup 1.3.6.1.4.1.5567.2.55.2.2.6
The group of objects that are needed for LSP LDP OAM ping.
               rsPingLspRsvpCtlGroup 1.3.6.1.4.1.5567.2.55.2.2.7
The group of objects that are needed for LSP RSVP OAM ping.
               rsPingHVplsCtlGroup 1.3.6.1.4.1.5567.2.55.2.2.8
The group of objects that are needed for HVPLS OAM ping.
       rsPingTypes 1.3.6.1.4.1.5567.2.55.3
           rsPingAtmOamLoopback 1.3.6.1.4.1.5567.2.55.3.1
Indicates that an implementation is using ATM OAM loopback.
           rsPingEtherOam 1.3.6.1.4.1.5567.2.55.3.5
Indicates that an implementation is using Ethernet OAM to find round trip time to remote host by L2 MAC address
           rsPingLspLdpOam 1.3.6.1.4.1.5567.2.55.3.6
Indicates that an implementation is using LSP LDP OAM to find round trip time to remote host by LSP-LDP FEC.
           rsPingLspRsvpOam 1.3.6.1.4.1.5567.2.55.3.7
Indicates that an implementation is using LSP RSVP OAM to find round trip time to remote host by LSP-RSVP Tunnel ID.
           rsPingHVplsOam 1.3.6.1.4.1.5567.2.55.3.8
Indicates that an implementation is using (H)VPLS OAM to find round trip time to remote host by L2 Mac address.