RFC1316-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1316-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 char 1.3.6.1.2.1.19
       charNumber 1.3.6.1.2.1.19.1 integer read-only
The number of entries in charPortTable, regardless of their current state.
       charPortTable 1.3.6.1.2.1.19.2 no-access
A list of port entries. The number of entries is given by the value of charNumber.
           charPortEntry 1.3.6.1.2.1.19.2.1 no-access
Status and parameter values for a character port.
               charPortIndex 1.3.6.1.2.1.19.2.1.1 integer read-only
A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, hardware port numbers come first, with a simple, direct mapping. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
               charPortName 1.3.6.1.2.1.19.2.1.2 displaystring read-write
An administratively assigned name for the port, typically with some local significance.
               charPortType 1.3.6.1.2.1.19.2.1.3 integer read-only
The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. Enumeration: 'virtual': 2, 'physical': 1.
               charPortHardware 1.3.6.1.2.1.19.2.1.4 autonomoustype read-only
A reference to hardware MIB definitions specific to a physical port's external connector. For example, if the connector is RS-232, then the value of this object refers to a MIB sub-tree defining objects specific to RS-232. If an agent is not configured to have such values, the agent returns the object identifier: nullHardware OBJECT IDENTIFIER ::= { 0 0 }
               charPortReset 1.3.6.1.2.1.19.2.1.5 integer read-write
A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes a reset. Enumeration: 'ready': 1, 'execute': 2.
               charPortAdminStatus 1.3.6.1.2.1.19.2.1.6 integer read-write
The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indicates that the port is allowed to pass characters but not form new sessions. 'off' indicates that the port is not allowed to pass characters or have any sessions. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. Enumeration: 'disabled': 2, 'off': 3, 'enabled': 1, 'maintenance': 4.
               charPortOperStatus 1.3.6.1.2.1.19.2.1.7 integer read-only
The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for administrative or operational reasons. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. 'absent' indicates that port hardware is not present. 'active' indicates up with a user present (e.g. logged in). Enumeration: 'down': 2, 'absent': 4, 'active': 5, 'up': 1, 'maintenance': 3.
               charPortLastChange 1.3.6.1.2.1.19.2.1.8 timeticks read-only
The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value.
               charPortInFlowType 1.3.6.1.2.1.19.2.1.9 integer read-write
The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicity's sake. Enumeration: 'hardware': 3, 'dsrDtr': 5, 'none': 1, 'ctsRts': 4, 'xonXoff': 2.
               charPortOutFlowType 1.3.6.1.2.1.19.2.1.10 integer read-write
The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicy's sake. Enumeration: 'hardware': 3, 'dsrDtr': 5, 'none': 1, 'ctsRts': 4, 'xonXoff': 2.
               charPortInFlowState 1.3.6.1.2.1.19.2.1.11 integer read-only
The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed. Enumeration: 'go': 4, 'unknown': 2, 'none': 1, 'stop': 3.
               charPortOutFlowState 1.3.6.1.2.1.19.2.1.12 integer read-only
The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed. Enumeration: 'go': 4, 'unknown': 2, 'none': 1, 'stop': 3.
               charPortInCharacters 1.3.6.1.2.1.19.2.1.13 counter read-only
Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-processed input, and input sent to all sessions.
               charPortOutCharacters 1.3.6.1.2.1.19.2.1.14 counter read-only
Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-created output, and output received from all sessions.
               charPortAdminOrigin 1.3.6.1.2.1.19.2.1.15 integer read-write
The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session establishment. Enumeration: 'local': 3, 'none': 4, 'dynamic': 1, 'network': 2.
               charPortSessionMaximum 1.3.6.1.2.1.19.2.1.16 integer read-write
The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessions has unspecified results.
               charPortSessionNumber 1.3.6.1.2.1.19.2.1.17 gauge read-only
The number of open sessions on the port that are in the connecting, connected, or disconnecting state.
               charPortSessionIndex 1.3.6.1.2.1.19.2.1.18 integer read-only
The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero.
       charSessTable 1.3.6.1.2.1.19.3 no-access
A list of port session entries.
           charSessEntry 1.3.6.1.2.1.19.3.1 no-access
Status and parameter values for a character port session.
               charSessPortIndex 1.3.6.1.2.1.19.3.1.1 integer read-only
The value of charPortIndex for the port to which this session belongs.
               charSessIndex 1.3.6.1.2.1.19.3.1.2 integer read-only
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. Session indexes may have any valid integer value, with any meaning convenient to the agent implementation.
               charSessKill 1.3.6.1.2.1.19.3.1.3 integer read-write
A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes termination. Enumeration: 'ready': 1, 'execute': 2.
               charSessState 1.3.6.1.2.1.19.3.1.4 integer read-only
The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. 'connecting' indicates moving from nonexistent toward 'connected'. 'disconnecting' indicates moving from 'connected' or 'connecting' to nonexistent. Enumeration: 'connected': 2, 'connecting': 1, 'disconnecting': 3.
               charSessProtocol 1.3.6.1.2.1.19.3.1.5 autonomoustype read-only
The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. However, this document assigns those of known interest as of this writing.
               charSessOperOrigin 1.3.6.1.2.1.19.3.1.6 integer read-only
The session's source of establishment. Enumeration: 'unknown': 1, 'local': 3, 'network': 2.
               charSessInCharacters 1.3.6.1.2.1.19.3.1.7 counter read-only
This session's subset of charPortInCharacters.
               charSessOutCharacters 1.3.6.1.2.1.19.3.1.8 counter read-only
This session's subset of charPortOutCharacters.
               charSessConnectionId 1.3.6.1.2.1.19.3.1.9 instancepointer read-only
A reference to additional local MIB information. This should be the highest available related MIB, corresponding to charSessProtocol, such as Telnet. For example, the value for a TCP connection (in the absence of a Telnet MIB) is the object identifier of tcpConnState. If an agent is not configured to have such values, the agent returns the object identifier: nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }
               charSessStartTime 1.3.6.1.2.1.19.3.1.10 timeticks read-only
The value of sysUpTime in MIB-2 when the session entered connecting state.
       wellKnownProtocols 1.3.6.1.2.1.19.4
           protocolOther 1.3.6.1.2.1.19.4.1
           protocolTelnet 1.3.6.1.2.1.19.4.2
           protocolRlogin 1.3.6.1.2.1.19.4.3
           protocolLat 1.3.6.1.2.1.19.4.4
           protocolX29 1.3.6.1.2.1.19.4.5
           protocolVtp 1.3.6.1.2.1.19.4.6