RFC1315-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1315-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 frame_relay 1.3.6.1.2.1.10.32
       frDlcmiTable 1.3.6.1.2.1.10.32.1 no-access
The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
           frDlcmiEntry 1.3.6.1.2.1.10.32.1.1 no-access
The Parameters for a particular Data Link Con- nection Management Interface.
               frDlcmiIfIndex 1.3.6.1.2.1.10.32.1.1.1 index read-only
The ifIndex value of the corresponding ifEn- try.
               frDlcmiState 1.3.6.1.2.1.10.32.1.1.2 integer read-write
This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface. Enumeration: 'lmiRev1': 2, 'noLmiConfigured': 1, 'ansiT1-617-B': 4, 'ansiT1-617-D': 3.
               frDlcmiAddress 1.3.6.1.2.1.10.32.1.1.3 integer read-write
This variable states which address format is in use on the Frame Relay interface. Enumeration: 'q921': 1, 'q922': 4, 'q922March90': 2, 'q922November90': 3.
               frDlcmiAddressLen 1.3.6.1.2.1.10.32.1.1.4 integer read-write
This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion. Enumeration: 'two-octets': 2, 'four-octets': 4, 'three-octets': 3.
               frDlcmiPollingInterval 1.3.6.1.2.1.10.32.1.1.5 integer read-write
This is the number of seconds between succes- sive status enquiry messages.
               frDlcmiFullEnquiryInterval 1.3.6.1.2.1.10.32.1.1.6 integer read-write
Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage.
               frDlcmiErrorThreshold 1.3.6.1.2.1.10.32.1.1.7 integer read-write
This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down.
               frDlcmiMonitoredEvents 1.3.6.1.2.1.10.32.1.1.8 integer read-write
This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
               frDlcmiMaxSupportedVCs 1.3.6.1.2.1.10.32.1.1.9 integer read-write
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond bad- Value
               frDlcmiMulticast 1.3.6.1.2.1.10.32.1.1.10 integer read-write
This indicates whether the Frame Relay inter- face is using a multicast service. Enumeration: 'broadcast': 2, 'nonBroadcast': 1.
       frCircuitTable 1.3.6.1.2.1.10.32.2 no-access
A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits.
           frCircuitEntry 1.3.6.1.2.1.10.32.2.1 no-access
The information regarding a single Data Link Connection Identifier.
               frCircuitIfIndex 1.3.6.1.2.1.10.32.2.1.1 index read-only
The ifIndex Value of the ifEntry this virtual circuit is layered onto.
               frCircuitDlci 1.3.6.1.2.1.10.32.2.1.2 dlci read-only
The Data Link Connection Identifier for this virtual circuit.
               frCircuitState 1.3.6.1.2.1.10.32.2.1.3 integer read-write
Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by set- ting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. Enumeration: 'active': 2, 'inactive': 3, 'invalid': 1.
               frCircuitReceivedFECNs 1.3.6.1.2.1.10.32.2.1.4 counter read-only
Number of frames received from the network in- dicating forward congestion since the virtual circuit was created.
               frCircuitReceivedBECNs 1.3.6.1.2.1.10.32.2.1.5 counter read-only
Number of frames received from the network in- dicating backward congestion since the virtual circuit was created.
               frCircuitSentFrames 1.3.6.1.2.1.10.32.2.1.6 counter read-only
The number of frames sent from this virtual circuit since it was created.
               frCircuitSentOctets 1.3.6.1.2.1.10.32.2.1.7 counter read-only
The number of octets sent from this virtual circuit since it was created.
               frCircuitReceivedFrames 1.3.6.1.2.1.10.32.2.1.8 counter read-only
Number of frames received over this virtual circuit since it was created.
               frCircuitReceivedOctets 1.3.6.1.2.1.10.32.2.1.9 counter read-only
Number of octets received over this virtual circuit since it was created.
               frCircuitCreationTime 1.3.6.1.2.1.10.32.2.1.10 timeticks read-only
The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or by a SetRe- quest.
               frCircuitLastTimeChange 1.3.6.1.2.1.10.32.2.1.11 timeticks read-only
The value of sysUpTime when last there was a change in the virtual circuit state
               frCircuitCommittedBurst 1.3.6.1.2.1.10.32.2.1.12 integer read-write
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
               frCircuitExcessBurst 1.3.6.1.2.1.10.32.2.1.13 integer read-write
This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
               frCircuitThroughput 1.3.6.1.2.1.10.32.2.1.14 integer read-write
Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val. If the configured committed burst rate and throughput are both non-zero, the measurement interval T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement in- terval T=frCircuitExcessBurst/ifSpeed.
       frErrTable 1.3.6.1.2.1.10.32.3 no-access
A table containing information about Errors on the Frame Relay interface.
           frErrEntry 1.3.6.1.2.1.10.32.3.1 no-access
The error information for a single frame relay interface.
               frErrIfIndex 1.3.6.1.2.1.10.32.3.1.1 index read-only
The ifIndex Value of the corresponding ifEn- try.
               frErrType 1.3.6.1.2.1.10.32.3.1.2 integer read-only
The type of error that was last seen on this interface. Enumeration: 'dlcmiUnknownRpt': 9, 'unknownDLCI': 5, 'dlcmiSequenceErr': 8, 'noErrorSinceReset': 10, 'dlcmiUnknownIE': 7, 'illegalDLCI': 4, 'receiveLong': 3, 'receiveShort': 2, 'dlcmiProtoErr': 6, 'unknownError': 1.
               frErrData 1.3.6.1.2.1.10.32.3.1.3 octet string read-only
An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all in- formation up to the PDU.
               frErrTime 1.3.6.1.2.1.10.32.3.1.4 timeticks read-only
The value of sysUpTime at which the error was detected.
       frame_relay_globals 1.3.6.1.2.1.10.32.4
           frTrapState 1.3.6.1.2.1.10.32.4.1 integer read-write
This variable indicates whether the system produces the frDLCIStatusChange trap. Enumeration: 'disabled': 2, 'enabled': 1.
         frDLCIStatusChange 1.3.6.1.2.1.10.320.1
This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.