RFC1269-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1269-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bgp 1.3.6.1.2.1.15
       bgpVersion 1.3.6.1.2.1.15.1 octet string read-only
Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported.
       bgpLocalAs 1.3.6.1.2.1.15.2 integer read-only
The local autonomous system number.
       bgpPeerTable 1.3.6.1.2.1.15.3 no-access
The bgp peer table.
           bgpPeerEntry 1.3.6.1.2.1.15.3.1 no-access
Information about a BGP peer connection.
               bgpPeerIdentifier 1.3.6.1.2.1.15.3.1.1 ipaddress read-only
The BGP Identifier of this entry's BGP peer.
               bgpPeerState 1.3.6.1.2.1.15.3.1.2 integer read-only
The bgp peer connection state. Enumeration: 'established': 6, 'openconfirm': 5, 'opensent': 4, 'idle': 1, 'connect': 2, 'active': 3.
               bgpPeerAdminStatus 1.3.6.1.2.1.15.3.1.3 integer read-write
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
               bgpPeerNegotiatedVersion 1.3.6.1.2.1.15.3.1.4 integer read-only
The negotiated version of BGP running between the two peers.
               bgpPeerLocalAddr 1.3.6.1.2.1.15.3.1.5 ipaddress read-only
The local IP address of this entry's BGP connection.
               bgpPeerLocalPort 1.3.6.1.2.1.15.3.1.6 integer read-only
The local port for the TCP connection between the BGP peers.
               bgpPeerRemoteAddr 1.3.6.1.2.1.15.3.1.7 ipaddress read-only
The remote IP address of this entry's BGP peer.
               bgpPeerRemotePort 1.3.6.1.2.1.15.3.1.8 integer read-only
The remote port for the TCP connection between the BGP peers. Note that the objects bgpLocalAddr, bgpLocalPort, bgpRemoteAddr and bgpRemotePort provide the appropriate reference to the standard MIB TCP connection table.
               bgpPeerRemoteAs 1.3.6.1.2.1.15.3.1.9 integer read-only
The remote autonomous system number.
               bgpPeerInUpdates 1.3.6.1.2.1.15.3.1.10 counter read-only
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
               bgpPeerOutUpdates 1.3.6.1.2.1.15.3.1.11 counter read-only
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
               bgpPeerInTotalMessages 1.3.6.1.2.1.15.3.1.12 counter read-only
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
               bgpPeerOutTotalMessages 1.3.6.1.2.1.15.3.1.13 counter read-only
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
               bgpPeerLastError 1.3.6.1.2.1.15.3.1.14 octet string read-only
The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code; the second contains the subcode.
       bgpIdentifier 1.3.6.1.2.1.15.4 ipaddress read-only
The BGP Identifier of local system.
       bgpRcvdPathAttrTable 1.3.6.1.2.1.15.5 no-access
The BGP Received Path Attribute Table contains information about paths to destination networks received by all peers.
           bgpPathAttrEntry 1.3.6.1.2.1.15.5.1 no-access
Information about a path to a network.
               bgpPathAttrPeer 1.3.6.1.2.1.15.5.1.1 ipaddress read-only
The IP address of the peer where the path information was learned.
               bgpPathAttrDestNetwork 1.3.6.1.2.1.15.5.1.2 ipaddress read-only
The address of the destination network.
               bgpPathAttrOrigin 1.3.6.1.2.1.15.5.1.3 integer read-only
The ultimate origin of the path information. Enumeration: 'egp': 2, 'incomplete': 3, 'igp': 1.
               bgpPathAttrASPath 1.3.6.1.2.1.15.5.1.4 octet string read-only
The set of ASs that must be traversed to reach the network. ( This object is probably best represented as SEQUENCE OF INTEGER. For SMI compatibility, though, it is represented as OCTET STRING. Each AS is represented as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
               bgpPathAttrNextHop 1.3.6.1.2.1.15.5.1.5 ipaddress read-only
The address of the border router that should be used for the destination network.
               bgpPathAttrInterASMetric 1.3.6.1.2.1.15.5.1.6 ipaddress read-only
The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is 0.
         bgpEstablished 1.3.6.1.2.1.150.1
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
         bgpBackwardTransition 1.3.6.1.2.1.150.2
The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.