RFC1248-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1248-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ospf 1.3.6.1.2.1.13
       ospfGeneralGroup 1.3.6.1.2.1.13.1
           ospfRouterId 1.3.6.1.2.1.13.1.1 routerid read-write
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
           ospfAdminStat 1.3.6.1.2.1.13.1.2 status read-write
The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.
           ospfVersionNumber 1.3.6.1.2.1.13.1.3 integer read-only
The current version number of the OSPF protocol is 2. Enumeration: 'version2': 2.
           ospfAreaBdrRtrStatus 1.3.6.1.2.1.13.1.4 truthvalue read-only
A flag to note whether this router is an area border router.
           ospfASBdrRtrStatus 1.3.6.1.2.1.13.1.5 truthvalue read-write
A flag to note whether this router is an Autonomous System border router.
           ospfExternLSACount 1.3.6.1.2.1.13.1.6 gauge read-only
The number of external (LS type 5) link-state advertisements in the link-state database.
           ospfExternLSACksumSum 1.3.6.1.2.1.13.1.7 integer read-only
The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
           ospfTOSSupport 1.3.6.1.2.1.13.1.8 truthvalue read-write
The router's support for type-of-service routing.
           ospfOriginateNewLSAs 1.3.6.1.2.1.13.1.9 counter read-only
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
           ospfRxNewLSAs 1.3.6.1.2.1.13.1.10 counter read-only
The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisements.
       ospfAreaTable 1.3.6.1.2.1.13.2 no-access
Information describing the configured parameters and cumulative statistics of the router's attached areas.
           ospfAreaEntry 1.3.6.1.2.1.13.2.1 no-access
Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
               ospfAreaId 1.3.6.1.2.1.13.2.1.1 areaid read-write
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
               ospfAuthType 1.3.6.1.2.1.13.2.1.2 integer read-write
The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.
               ospfImportASExtern 1.3.6.1.2.1.13.2.1.3 truthvalue read-write
The area's support for importing AS external link- state advertisements.
               ospfSpfRuns 1.3.6.1.2.1.13.2.1.4 counter read-only
The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
               ospfAreaBdrRtrCount 1.3.6.1.2.1.13.2.1.5 gauge read-only
The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
               ospfASBdrRtrCount 1.3.6.1.2.1.13.2.1.6 gauge read-only
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
               ospfAreaLSACount 1.3.6.1.2.1.13.2.1.7 gauge read-only
The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
               ospfAreaLSACksumSum 1.3.6.1.2.1.13.2.1.8 integer read-only
The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
       ospfStubAreaTable 1.3.6.1.2.1.13.3 no-access
The set of metrics that will be advertised by a default Area Border Router into a stub area.
           ospfStubAreaEntry 1.3.6.1.2.1.13.3.1 no-access
The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area.
               ospfStubAreaID 1.3.6.1.2.1.13.3.1.1 areaid read-write
The 32 bit identifier for the Stub Area. On creation, this can be derived from the instance.
               ospfStubTOS 1.3.6.1.2.1.13.3.1.2 tostype read-write
The Type of Service associated with the metric. On creation, this can be derived from the instance.
               ospfStubMetric 1.3.6.1.2.1.13.3.1.3 bigmetric read-write
The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas.
               ospfStubStatus 1.3.6.1.2.1.13.3.1.4 validation read-write
This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
       ospfLsdbTable 1.3.6.1.2.1.13.4 no-access
The OSPF Process's Links State Database.
           ospfLsdbEntry 1.3.6.1.2.1.13.4.1 no-access
A single Link State Advertisement.
               ospfLsdbAreaId 1.3.6.1.2.1.13.4.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
               ospfLsdbType 1.3.6.1.2.1.13.4.1.2 integer read-only
The type of the link state advertisement. Each link state type has a separate advertisement format. Enumeration: 'asExternalLink': 5, 'routerLink': 1, 'summaryLink': 3, 'asSummaryLink': 4, 'networkLink': 2.
               ospfLsdbLSID 1.3.6.1.2.1.13.4.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
               ospfLsdbRouterId 1.3.6.1.2.1.13.4.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
               ospfLsdbSequence 1.3.6.1.2.1.13.4.1.5 integer read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
               ospfLsdbAge 1.3.6.1.2.1.13.4.1.6 integer read-only
This field is the age of the link state advertisement in seconds.
               ospfLsdbChecksum 1.3.6.1.2.1.13.4.1.7 integer read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
               ospfLsdbAdvertisement 1.3.6.1.2.1.13.4.1.8 octet string read-only
The entire Link State Advertisement, including its header.
       ospfAreaRangeTable 1.3.6.1.2.1.13.5 no-access
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
           ospfAreaRangeEntry 1.3.6.1.2.1.13.5.1 no-access
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
               ospfAreaRangeAreaID 1.3.6.1.2.1.13.5.1.1 areaid read-write
The Area the Address Range is to be found within.
               ospfAreaRangeNet 1.3.6.1.2.1.13.5.1.2 ipaddress read-write
The IP Address of the Net or Subnet indicated by the range.
               ospfAreaRangeMask 1.3.6.1.2.1.13.5.1.3 ipaddress read-write
The Subnet Mask that pertains to the Net or Subnet.
               ospfAreaRangeStatus 1.3.6.1.2.1.13.5.1.4 validation read-write
This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
       ospfHostTable 1.3.6.1.2.1.13.6 no-access
The list of Hosts, and their metrics, that the router will advertise as host routes.
           ospfHostEntry 1.3.6.1.2.1.13.6.1 no-access
A metric to be advertised, for a given type of service, when a given host is reachable.
               ospfHostIpAddress 1.3.6.1.2.1.13.6.1.1 ipaddress read-write
The IP Address of the Host.
               ospfHostTOS 1.3.6.1.2.1.13.6.1.2 tostype read-write
The Type of Service of the route being configured.
               ospfHostMetric 1.3.6.1.2.1.13.6.1.3 metric read-write
The Metric to be advertised.
               ospfHostStatus 1.3.6.1.2.1.13.6.1.4 validation read-write
This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
       ospfIfTable 1.3.6.1.2.1.13.7 no-access
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
           ospfIfEntry 1.3.6.1.2.1.13.7.1 no-access
The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
               ospfIfIpAddress 1.3.6.1.2.1.13.7.1.1 ipaddress read-write
The IP address of this OSPF interface.
               ospfAddressLessIf 1.3.6.1.2.1.13.7.1.2 integer read-write
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
               ospfIfAreaId 1.3.6.1.2.1.13.7.1.3 areaid read-write
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
               ospfIfType 1.3.6.1.2.1.13.7.1.4 integer read-write
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'. Enumeration: 'broadcast': 1, 'nbma': 2, 'pointToPoint': 3.
               ospfIfAdminStat 1.3.6.1.2.1.13.7.1.5 status read-write
The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
               ospfIfRtrPriority 1.3.6.1.2.1.13.7.1.6 designatedrouterpriority read-write
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
               ospfIfTransitDelay 1.3.6.1.2.1.13.7.1.7 uptomaxage read-write
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
               ospfIfRetransInterval 1.3.6.1.2.1.13.7.1.8 uptomaxage read-write
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
               ospfIfHelloInterval 1.3.6.1.2.1.13.7.1.9 hellorange read-write
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
               ospfIfRtrDeadInterval 1.3.6.1.2.1.13.7.1.10 positiveinteger read-write
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
               ospfIfPollInterval 1.3.6.1.2.1.13.7.1.11 positiveinteger read-write
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.
               ospfIfState 1.3.6.1.2.1.13.7.1.12 integer read-only
The OSPF Interface State. Enumeration: 'otherDesignatedRouter': 7, 'backupDesignatedRouter': 6, 'loopback': 2, 'down': 1, 'designatedRouter': 5, 'waiting': 3, 'pointToPoint': 4.
               ospfIfDesignatedRouter 1.3.6.1.2.1.13.7.1.13 ipaddress read-only
The IP Address of the Designated Router.
               ospfIfBackupDesignatedRouter 1.3.6.1.2.1.13.7.1.14 ipaddress read-only
The IP Address of the Backup Designated Router.
               ospfIfEvents 1.3.6.1.2.1.13.7.1.15 counter read-only
The number of times this OSPF interface has changed its state, or an error has occurred.
               ospfIfAuthKey 1.3.6.1.2.1.13.7.1.16 octet string read-write
The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.
       ospfIfMetricTable 1.3.6.1.2.1.13.8 no-access
The TOS metrics for a non-virtual interface identified by the interface index.
           ospfIfMetricEntry 1.3.6.1.2.1.13.8.1 no-access
A particular TOS metric for a non-virtual interface identified by the interface index.
               ospfIfMetricIpAddress 1.3.6.1.2.1.13.8.1.1 ipaddress read-write
The IP address of this OSPF interface. On row creation, this can be derived from the instance.
               ospfIfMetricAddressLessIf 1.3.6.1.2.1.13.8.1.2 integer read-write
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address. On row creation, this can be derived from the instance.
               ospfIfMetricTOS 1.3.6.1.2.1.13.8.1.3 tostype read-write
The type of service metric being referenced. On row creation, this can be derived from the instance.
               ospfIfMetricMetric 1.3.6.1.2.1.13.8.1.4 metric read-write
The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.
               ospfIfMetricStatus 1.3.6.1.2.1.13.8.1.5 validation read-write
This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
       ospfVirtIfTable 1.3.6.1.2.1.13.9 no-access
Information about this router's virtual interfaces.
           ospfVirtIfEntry 1.3.6.1.2.1.13.9.1 no-access
Information about a single Virtual Interface.
               ospfVirtIfAreaID 1.3.6.1.2.1.13.9.1.1 areaid read-write
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
               ospfVirtIfNeighbor 1.3.6.1.2.1.13.9.1.2 routerid read-write
The Router ID of the Virtual Neighbor.
               ospfVirtIfTransitDelay 1.3.6.1.2.1.13.9.1.3 uptomaxage read-write
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
               ospfVirtIfRetransInterval 1.3.6.1.2.1.13.9.1.4 uptomaxage read-write
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
               ospfVirtIfHelloInterval 1.3.6.1.2.1.13.9.1.5 hellorange read-write
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
               ospfVirtIfRtrDeadInterval 1.3.6.1.2.1.13.9.1.6 positiveinteger read-write
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
               ospfVirtIfState 1.3.6.1.2.1.13.9.1.7 integer read-only
OSPF virtual interface states. Enumeration: 'down': 1, 'pointToPoint': 4.
               ospfVirtIfEvents 1.3.6.1.2.1.13.9.1.8 counter read-only
The number of state changes or error events on this Virtual Link
               ospfVirtIfAuthKey 1.3.6.1.2.1.13.9.1.9 octet string read-write
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero.
               ospfVirtIfStatus 1.3.6.1.2.1.13.9.1.10 validation read-write
This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
       ospfNbrTable 1.3.6.1.2.1.13.10 no-access
A table of non-virtual neighbor information.
             ospfNbrEntry 1.3.6.1.2.1.13.10.1 no-access
The information regarding a single neighbor.
                 ospfNbrIpAddr 1.3.6.1.2.1.13.10.1.1 ipaddress read-write
The IP address of this neighbor.
                 ospfNbrAddressLessIndex 1.3.6.1.2.1.13.10.1.2 interfaceindex read-write
On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
                 ospfNbrRtrId 1.3.6.1.2.1.13.10.1.3 routerid read-only
A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.
                 ospfNbrOptions 1.3.6.1.2.1.13.10.1.4 integer read-only
A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.
                 ospfNbrPriority 1.3.6.1.2.1.13.10.1.5 designatedrouterpriority read-write
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
                 ospfNbrState 1.3.6.1.2.1.13.10.1.6 integer read-only
The State of the relationship with this Neighbor. Enumeration: 'exchangeStart': 5, 'loading': 7, 'attempt': 2, 'exchange': 6, 'down': 1, 'init': 3, 'full': 8, 'twoWay': 4.
                 ospfNbrEvents 1.3.6.1.2.1.13.10.1.7 counter read-only
The number of times this neighbor relationship has changed state, or an error has occurred.
                 ospfNbrLSRetransQLen 1.3.6.1.2.1.13.10.1.8 gauge read-only
The current length of the retransmission queue.
                 ospfNBMANbrStatus 1.3.6.1.2.1.13.10.1.9 validation read-write
This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
       ospfVirtNbrTable 1.3.6.1.2.1.13.11 no-access
A table of virtual neighbor information.
             ospfVirtNbrEntry 1.3.6.1.2.1.13.11.1 no-access
Virtual neighbor information.
                 ospfVirtNbrArea 1.3.6.1.2.1.13.11.1.1 areaid read-only
The Transit Area Identifier.
                 ospfVirtNbrRtrId 1.3.6.1.2.1.13.11.1.2 routerid read-only
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
                 ospfVirtNbrIpAddr 1.3.6.1.2.1.13.11.1.3 ipaddress read-only
The IP address this Virtual Neighbor is using.
                 ospfVirtNbrOptions 1.3.6.1.2.1.13.11.1.4 integer read-only
A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.
                 ospfVirtNbrState 1.3.6.1.2.1.13.11.1.5 integer read-only
The state of the Virtual Neighbor Relationship. Enumeration: 'exchangeStart': 5, 'loading': 7, 'attempt': 2, 'exchange': 6, 'down': 1, 'init': 3, 'full': 8, 'twoWay': 4.
                 ospfVirtNbrEvents 1.3.6.1.2.1.13.11.1.6 counter read-only
The number of times this virtual link has changed its state, or an error has occurred.
                 ospfVirtNbrLSRetransQLen 1.3.6.1.2.1.13.11.1.7 gauge read-only
The current length of the retransmission queue.