RFC1243-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1243-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 appletalk 1.3.6.1.2.1.13
       llap 1.3.6.1.2.1.13.1
           llapTable 1.3.6.1.2.1.13.1.1 no-access
The list of LLAP entries.
               llapEntry 1.3.6.1.2.1.13.1.1.1 no-access
An LLAP entry containing objects for the LocalTalk Link Access Protocol for a particular LocalTalk interface.
                   llapIfIndex 1.3.6.1.2.1.13.1.1.1.1 integer read-only
The LLAP interface to which this entry pertains. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                   llapInPkts 1.3.6.1.2.1.13.1.1.1.2 counter read-only
The total number of good packets received on this LocalTalk interface.
                   llapOutPkts 1.3.6.1.2.1.13.1.1.1.3 counter read-only
The total number of packets transmitted on this LocalTalk interface.
                   llapInNoHandlers 1.3.6.1.2.1.13.1.1.1.4 counter read-only
The total number of good packets received on this LocalTalk interface for which there was no protocol handler.
                   llapInLengthErrors 1.3.6.1.2.1.13.1.1.1.5 counter read-only
The total number of packets received on this LocalTalk interface whose actual length did not match the length in the header.
                   llapInErrors 1.3.6.1.2.1.13.1.1.1.6 counter read-only
The total number of packets containing errors received on this LocalTalk interface.
                   llapCollisions 1.3.6.1.2.1.13.1.1.1.7 counter read-only
The total number of collisions assumed on this LocalTalk interface due to the lack of a lapCTS reply.
                   llapDefers 1.3.6.1.2.1.13.1.1.1.8 counter read-only
The total number of times this LocalTalk interface deferred to other packets.
                   llapNoDataErrors 1.3.6.1.2.1.13.1.1.1.9 counter read-only
The total number of times this LocalTalk interface received a lapRTS packet and expected a data packet, but did not receive any data packet.
                   llapRandomCTSErrors 1.3.6.1.2.1.13.1.1.1.10 counter read-only
The total number of times this LocalTalk interface received a lapCTS packet that was not solicited by a lapRTS packet.
                   llapFCSErrors 1.3.6.1.2.1.13.1.1.1.11 counter read-only
The total number of times this LocalTalk interface received a packet with an FCS (Frame Check Sequence) error.
       aarp 1.3.6.1.2.1.13.2
           aarpTable 1.3.6.1.2.1.13.2.1 no-access
The AppleTalk Address Translation Table contains an equivalence of AppleTalk Network Addresses to the link layer physical address.
               aarpEntry 1.3.6.1.2.1.13.2.1.1 no-access
Each entry contains one AppleTalk Network Address to physical address equivalence.
                   aarpIfIndex 1.3.6.1.2.1.13.2.1.1.1 integer read-only
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                   aarpPhysAddress 1.3.6.1.2.1.13.2.1.1.2 octet string read-only
The media-dependent physical address
                   aarpNetAddress 1.3.6.1.2.1.13.2.1.1.3 ddpaddress read-only
The AppleTalk Network Address corresponding to the media-dependent physical address.
       atport 1.3.6.1.2.1.13.3
           atportTable 1.3.6.1.2.1.13.3.1 no-access
A list of AppleTalk ports for this entity.
               atportEntry 1.3.6.1.2.1.13.3.1.1 no-access
The description of one of the AppleTalk ports on this entity.
                   atportIndex 1.3.6.1.2.1.13.3.1.1.1 integer read-only
A unique value for each AppleTalk port. Its value is between 1 and the total number of AppleTalk ports. The value for each port must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization.
                   atportDescr 1.3.6.1.2.1.13.3.1.1.2 displaystring read-only
A text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters.
                   atportType 1.3.6.1.2.1.13.3.1.1.3 integer read-write
The type of port, distinguished by the protocol immediately below DDP in the protocol stack. Enumeration: 'localtalk': 2, 'tokentalk': 5, 'ethertalk1': 3, 'ethertalk2': 4, 'iptalk': 6, 'other': 1, 'virtual': 9, 'serial-ppp': 7, 'serial-nonstandard': 8.
                   atportNetStart 1.3.6.1.2.1.13.3.1.1.4 octet string read-write
The first AppleTalk network address in the range configured for this port. This is a two octet DDP network address in network byte order.
                   atportNetEnd 1.3.6.1.2.1.13.3.1.1.5 octet string read-write
The last AppleTalk network address in the range configured for this port. This is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a Phase 1 network or a non-extended network, the value for atportNetEnd shall be two octets of zero.
                   atportNetAddress 1.3.6.1.2.1.13.3.1.1.6 ddpaddress read-write
The AppleTalk network address configured for this port.
                   atportStatus 1.3.6.1.2.1.13.3.1.1.7 integer read-write
The configuration status of this port. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry in the atportTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atportStatus object. Enumeration: 'off': 3, 'unconfigured': 2, 'invalid': 4, 'operational': 1.
                   atportNetConfig 1.3.6.1.2.1.13.3.1.1.8 integer read-only
The configuration status of this port. Enumeration: 'configured': 1, 'guessed': 3, 'unconfigured': 4, 'garnered': 2.
                   atportZoneConfig 1.3.6.1.2.1.13.3.1.1.9 integer read-only
The configuration status of the zone information for this port. Enumeration: 'configured': 1, 'guessed': 3, 'unconfigured': 4, 'garnered': 2.
                   atportZone 1.3.6.1.2.1.13.3.1.1.10 octet string read-write
The zone name configured for this AppleTalk port.
                   atportIfIndex 1.3.6.1.2.1.13.3.1.1.11 integer read-write
The physical interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
       ddp 1.3.6.1.2.1.13.4
           ddpOutRequests 1.3.6.1.2.1.13.4.1 counter read-only
The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any datagrams counted in ddpForwRequests.
           ddpOutShorts 1.3.6.1.2.1.13.4.2 counter read-only
The total number of short DDP datagrams which were transmitted from this entity.
           ddpOutLongs 1.3.6.1.2.1.13.4.3 counter read-only
The total number of long DDP datagrams which were transmitted from this entity.
           ddpInReceives 1.3.6.1.2.1.13.4.4 counter read-only
The total number of input datagrams received by DDP, including those received in error.
           ddpForwRequests 1.3.6.1.2.1.13.4.5 counter read-only
The number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination.
           ddpInLocalDatagrams 1.3.6.1.2.1.13.4.6 counter read-only
The total number of input DDP datagrams for which this entity was their final DDP destination.
           ddpNoProtocolHandlers 1.3.6.1.2.1.13.4.7 counter read-only
The total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed.
           ddpOutNoRoutes 1.3.6.1.2.1.13.4.8 counter read-only
The total number of DDP datagrams dropped because a route could not be found to their final destination.
           ddpTooShortErrors 1.3.6.1.2.1.13.4.9 counter read-only
The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header.
           ddpTooLongErrors 1.3.6.1.2.1.13.4.10 counter read-only
The total number of input DDP datagrams dropped because the received data length was greater than the data length specified in the DDP header or because they exceeded the maximum DDP datagram size.
           ddpBroadcastErrors 1.3.6.1.2.1.13.4.11 counter read-only
The total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast.
           ddpShortDDPErrors 1.3.6.1.2.1.13.4.12 counter read-only
The total number of input DDP datagrams dropped because this entity was not their final destination and their type was short DDP.
           ddpHopCountErrors 1.3.6.1.2.1.13.4.13 counter read-only
The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15.
           ddpChecksumErrors 1.3.6.1.2.1.13.4.14 counter read-only
The total number of input DDP datagrams dropped because of a checksum error.
       rtmp 1.3.6.1.2.1.13.5
           rtmpTable 1.3.6.1.2.1.13.5.1 no-access
A list of Routing Table Maintenance Protocol entries for this entity.
               rtmpEntry 1.3.6.1.2.1.13.5.1.1 no-access
The route entry to a particular network range.
                   rtmpRangeStart 1.3.6.1.2.1.13.5.1.1.1 octet string read-write
The first DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order.
                   rtmpRangeEnd 1.3.6.1.2.1.13.5.1.1.2 octet string read-write
The last DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order. If the network to which this routing entry pertains is a Phase 1 network or a non-extended network, the value for rtmpRangeEnd shall be two octets of zero.
                   rtmpNextHop 1.3.6.1.2.1.13.5.1.1.3 octet string read-write
The next hop in the route to this entry's destination network. If the type of this route is Appletalk, this address takes the same form as DdpAddress.
                   rtmpType 1.3.6.1.2.1.13.5.1.1.4 integer read-write
The type of network over which this route points. Enumeration: 'serial-ppp': 3, 'serial-nonstandard': 4, 'other': 1, 'appletalk': 2.
                   rtmpPort 1.3.6.1.2.1.13.5.1.1.5 integer read-write
The index of the AppleTalk port over which this route points.
                   rtmpHops 1.3.6.1.2.1.13.5.1.1.6 integer read-write
The number of hops required to reach the destination network to which this routing entry pertains.
                   rtmpState 1.3.6.1.2.1.13.5.1.1.7 integer read-write
The status of the information contained in this route entry. Setting this object to the value bad(4) has the effect of invalidating the corresponding entry in the rtmpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant rtmpState object. Enumeration: 'bad': 4, 'good': 1, 'suspect': 2, 'goingBad': 3.
       kip 1.3.6.1.2.1.13.6
           kipTable 1.3.6.1.2.1.13.6.1 no-access
The table of routing information for KIP networks.
               kipEntry 1.3.6.1.2.1.13.6.1.1 no-access
An entry in the routing table for KIP networks.
                   kipNetStart 1.3.6.1.2.1.13.6.1.1.1 octet string read-write
The first AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order.
                   kipNetEnd 1.3.6.1.2.1.13.6.1.1.2 octet string read-write
The last AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a Phase 1 network or a non-extended network, the value for kipNetEnd shall be two octets of zero.
                   kipNextHop 1.3.6.1.2.1.13.6.1.1.3 ipaddress read-write
The IP address of the next hop in the route to this entry's destination network.
                   kipHopCount 1.3.6.1.2.1.13.6.1.1.4 integer read-write
The number of hops required to reach the destination network to which this entry pertains.
                   kipBCastAddr 1.3.6.1.2.1.13.6.1.1.5 ipaddress read-write
The form of the IP address used to broadcast on this network.
                   kipCore 1.3.6.1.2.1.13.6.1.1.6 integer read-write
The status of this network as a Kip Core network. Enumeration: 'core': 1, 'notcore': 2.
                   kipType 1.3.6.1.2.1.13.6.1.1.7 integer read-write
The type of the entity that this route points to. Enumeration: 'net': 2, 'other': 4, 'host': 3, 'kipRouter': 1.
                   kipState 1.3.6.1.2.1.13.6.1.1.8 integer read-write
The state of this network entry. Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the kipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant kipState object. Enumeration: 'configured': 1, 'learned': 2, 'invalid': 3.
                   kipShare 1.3.6.1.2.1.13.6.1.1.9 integer read-write
If the information in this entry is propagated to other routers as part of a routing protocol, the value of this variable is equal to shared(1). Otherwise its value is private(2). Enumeration: 'shared': 1, 'private': 2.
       zip 1.3.6.1.2.1.13.7
           zipTable 1.3.6.1.2.1.13.7.1 no-access
The table of zone information for reachable AppleTalk networks.
               zipEntry 1.3.6.1.2.1.13.7.1.1 no-access
An entry of zone information for a particular zone and network combination.
                   zipZoneName 1.3.6.1.2.1.13.7.1.1.1 octet string read-write
The ASCII zone name of this entry.
                   zipZoneIndex 1.3.6.1.2.1.13.7.1.1.2 integer read-only
An integer that is unique to the zipZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same zipZoneIndex.
                   zipZoneNetStart 1.3.6.1.2.1.13.7.1.1.3 octet string read-write
The network that starts the range for this entry. This address is a two octet DDP network address in network byte order.
                   zipZoneNetEnd 1.3.6.1.2.1.13.7.1.1.4 octet string read-write
The network that ends the range for this entry. This address is a two octet DDP network address in network byte order. If the network to which this zip entry pertains is a Phase 1 network or a non-extended network, the value for zipZoneNetEnd shall be two bytes of zero.
                   zipZoneState 1.3.6.1.2.1.13.7.1.1.5 integer read-write
The state of this zip entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the zipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant zipZoneState object. Enumeration: 'valid': 1, 'invalid': 2.
       nbp 1.3.6.1.2.1.13.8
           nbpTable 1.3.6.1.2.1.13.8.1 no-access
The table of NBP services registered on this entity.
               nbpEntry 1.3.6.1.2.1.13.8.1.1 no-access
The description of an NBP service registered on this entity.
                   nbpIndex 1.3.6.1.2.1.13.8.1.1.1 integer read-only
The index of this NBP entry. This value ranges from 1 to the number of NBP entries currently registered on this entity.
                   nbpObject 1.3.6.1.2.1.13.8.1.1.2 octet string read-write
The name of the service described by this entity.
                   nbpType 1.3.6.1.2.1.13.8.1.1.3 octet string read-write
The type of the service described by this entity.
                   nbpZone 1.3.6.1.2.1.13.8.1.1.4 octet string read-write
The zone the service described by this entity is registered in.
                   nbpState 1.3.6.1.2.1.13.8.1.1.5 integer read-write
The state of this NBP entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nbpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nbpState object. Enumeration: 'valid': 1, 'invalid': 2.
       atecho 1.3.6.1.2.1.13.9
           atechoRequests 1.3.6.1.2.1.13.9.1 counter read-only
The number of AppleTalk echo requests received.
           atechoReplies 1.3.6.1.2.1.13.9.2 counter read-only
The number of AppleTalk echo replies sent.