RFC1233-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1233-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ds3 1.3.6.1.2.1.10.30
       ds3ConfigTable 1.3.6.1.2.1.10.30.1 no-access
The DS3 Configuration table.
           ds3ConfigEntry 1.3.6.1.2.1.10.30.1.1 no-access
An entry in the DS3 Configuration table.
               ds3CSUIndex 1.3.6.1.2.1.10.30.1.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable.
               ds3Index 1.3.6.1.2.1.10.30.1.1.2 integer read-only
An index value that uniquely identifies a DS3 Interface. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance.
               ds3TimeElapsed 1.3.6.1.2.1.10.30.1.1.3 integer read-only
The number of seconds, including partial seconds, that have elapsed since the beginning of the current error-measurement period.
               ds3ValidIntervals 1.3.6.1.2.1.10.30.1.1.4 integer read-only
The number of previous intervals for which valid data was collected. The value will be 96 unless the CSU device was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the CSU has been online.
               ds3LineType 1.3.6.1.2.1.10.30.1.1.5 integer read-only
This variable indicates the variety of DS3 C-bit application implementing this circuit. The type of circuit affects the interpretation of the usage and error statistics. The rate of all of them is 44.736 Mbps. The values, in sequence, describe: TITLE: SPECIFICATION: ds3M23 ANSI T1.107-1988 [10] ds3SYNTRAN ANSI T1.107-1988 [10] ds3C-bitParity ANSI T1.107a-1989 [10a] ds3ClearChannel ANSI T1.102-1987 [9] Enumeration: 'ds3M23': 2, 'ds3CbitParity': 4, 'other': 1, 'ds3SYNTRAN': 3, 'ds3ClearChannel': 5.
               ds3ZeroCoding 1.3.6.1.2.1.10.30.1.1.6 integer read-only
This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. ds3B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. Enumeration: 'ds3other': 1, 'ds3B3ZS': 2.
               ds3Loopback 1.3.6.1.2.1.10.30.1.1.7 integer read-only
This variable represents the loopback state of the CSU. Devices supporting read/write access should return badValue in response to a requested loopback state that the CSU does not support. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on either interface shall always return this as it's value. ds3LocalLoopbackLocalSide Signal received from the local side of the device is looped back at the local connector (eg, without involving the CSU). ds3LocalLoopbackRemoteSide Signal received from the local side of the device is looped back at the remote connector (eg, through the CSU). ds3RemoteLoopbackLocalSide Signal received from the remote side of the device is looped back at the local connector (eg, through the CSU). ds3RemoteLoopbackRemoteSide Signal received from the remote side of the device is looped back at the remote connector (eg, without involving the CSU). Note that M23 and ClearChannel interfaces do not support the Loopback managed object. Enumeration: 'ds3RemoteLoopbackRemoteSide': 5, 'ds3LocalLoopbackLocalSide': 2, 'ds3RemoteLoopbackLocalSide': 4, 'ds3NoLoop': 1, 'ds3LocalLoopbackRemoteSide': 3.
               ds3SendCode 1.3.6.1.2.1.10.30.1.1.8 integer read-only
This variable indicates what type of code is being sent across the DS1 circuit by the CSU. The values mean: ds3SendNoCode sending looped or normal data ds3SendSetCode sending a loopback request ds3SendLoopbackCode sending the code to choose a specific loopback ds3SendResetCode sending a loopback termination request ds3SendTestMessage sending a Test pattern as defined in T1.107a-1989 [10a]. Enumeration: 'ds3SendSetCode': 3, 'ds3SendLoopbackCode': 4, 'ds3SendTestMessage': 1, 'ds3SendResetCode': 5, 'ds3SendNoCode': 2.
               ds3YellowAlarm 1.3.6.1.2.1.10.30.1.1.9 integer read-only
This variable indicates if a Yellow Alarm condition exists. Enumeration: 'ds3YellowAlarm': 1, 'ds3NoYellowAlarm': 2.
               ds3RedAlarm 1.3.6.1.2.1.10.30.1.1.10 integer read-only
This variable indicates if a Red Alarm condition exists. Enumeration: 'ds3RedAlarm': 1, 'ds3NoRedAlarm': 2.
               ds3CircuitIdentifier 1.3.6.1.2.1.10.30.1.1.11 displaystring read-only
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
       ds3IntervalTable 1.3.6.1.2.1.10.30.2 no-access
The DS3 Interval table.
           ds3IntervalEntry 1.3.6.1.2.1.10.30.2.1 no-access
An entry in the DS3 Interval table.
               ds3IntervalIndex 1.3.6.1.2.1.10.30.2.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an DS3CSUIndex object instance.
               ds3IntervalNumber 1.3.6.1.2.1.10.30.2.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
               ds3IntervalESs 1.3.6.1.2.1.10.30.2.1.3 counter read-only
The counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals.
               ds3IntervalSESs 1.3.6.1.2.1.10.30.2.1.4 counter read-only
The counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals.
               ds3IntervalSEFSs 1.3.6.1.2.1.10.30.2.1.5 counter read-only
The counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals.
               ds3IntervalUASs 1.3.6.1.2.1.10.30.2.1.6 counter read-only
The counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals.
               ds3IntervalCSSs 1.3.6.1.2.1.10.30.2.1.7 counter read-only
The counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals. Note that SYNTRAN interfaces are the only interfaces that support the Controlled Slip Seconds managed object. Accordingly, agents configured with non-SYNTRAN interfaces may treat this object as having an ACCESS clause value of not-accessible.
               ds3IntervalBPVs 1.3.6.1.2.1.10.30.2.1.8 counter read-only
The counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals.
               ds3IntervalCVs 1.3.6.1.2.1.10.30.2.1.9 counter read-only
The counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals.
       ds3CurrentTable 1.3.6.1.2.1.10.30.3 no-access
The DS3 Current table.
           ds3CurrentEntry 1.3.6.1.2.1.10.30.3.1 no-access
An entry in the DS3 Current table.
               ds3CurrentIndex 1.3.6.1.2.1.10.30.3.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an DS3CSUIndex object instance.
               ds3CurrentESs 1.3.6.1.2.1.10.30.3.1.2 counter read-only
The counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
               ds3CurrentSESs 1.3.6.1.2.1.10.30.3.1.3 counter read-only
The counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
               ds3CurrentSEFSs 1.3.6.1.2.1.10.30.3.1.4 counter read-only
The counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
               ds3CurrentUASs 1.3.6.1.2.1.10.30.3.1.5 counter read-only
The counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
               ds3CurrentCSSs 1.3.6.1.2.1.10.30.3.1.6 counter read-only
The counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval. Note that SYNTRAN interfaces are the only interfaces that support the Controlled Slip Seconds managed object. Accordingly, agents configured with non-SYNTRAN interfaces may treat this object as having an ACCESS clause value of not-accessible.
               ds3CurrentBPVs 1.3.6.1.2.1.10.30.3.1.7 counter read-only
The counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
               ds3CurrentCVs 1.3.6.1.2.1.10.30.3.1.8 counter read-only
The counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
       ds3TotalTable 1.3.6.1.2.1.10.30.4 no-access
The DS3 Total table. 24 hour interval.
           ds3TotalEntry 1.3.6.1.2.1.10.30.4.1 no-access
An entry in the DS3 Total table.
               ds3TotalIndex 1.3.6.1.2.1.10.30.4.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an DS3CSUIndex object instance.
               ds3TotalESs 1.3.6.1.2.1.10.30.4.1.2 counter read-only
The counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
               ds3TotalSESs 1.3.6.1.2.1.10.30.4.1.3 counter read-only
The counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
               ds3TotalSEFSs 1.3.6.1.2.1.10.30.4.1.4 counter read-only
The counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
               ds3TotalUASs 1.3.6.1.2.1.10.30.4.1.5 counter read-only
The counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
               ds3TotalCSSs 1.3.6.1.2.1.10.30.4.1.6 counter read-only
The counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval. Note that SYNTRAN interfaces are the only interfaces that support the Controlled Slip Seconds managed object. Accordingly, agents configured with non-SYNTRAN interfaces may treat this object as having an ACCESS clause value of not-accessible.
               ds3TotalBPVs 1.3.6.1.2.1.10.30.4.1.7 counter read-only
The counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
               ds3TotalCVs 1.3.6.1.2.1.10.30.4.1.8 counter read-only
The counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.