RFC1232-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RFC1232-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ds1 1.3.6.1.2.1.10.18
       ds1ConfigTable 1.3.6.1.2.1.10.18.1 no-access
The DS1 Configuration table.
           ds1ConfigEntry 1.3.6.1.2.1.10.18.1.1 no-access
An entry in the DS1 Configuration table.
               ds1CSUIndex 1.3.6.1.2.1.10.18.1.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable.
               ds1Index 1.3.6.1.2.1.10.18.1.1.2 integer read-only
An index value that uniquely identifies an interface to a ds1. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance.
               ds1TimeElapsed 1.3.6.1.2.1.10.18.1.1.3 integer read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period. Any fraction is rounded up.
               ds1ValidIntervals 1.3.6.1.2.1.10.18.1.1.4 integer read-only
The number of previous intervals for which valid data was collected. The value will be 96 unless the CSU device was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the CSU has been online.
               ds1LineType 1.3.6.1.2.1.10.18.1.1.5 integer read-only
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: ds1ESF AT&T Extended SuperFrame DS1 [10] ds1D4 AT&T D4 format DS1 [16], [17] ds1ANSI-ESF ANSI Extended SuperFrame format [14] ds1G704 CCITT Recommendation G.704 [12] (section 2.1.3.2) ds1G704-CRC CCITT Recommendation G.704 [12] (section 2.1.3.1) Enumeration: 'ds1G704': 5, 'ds1ANSI-ESF': 4, 'ds1ESF': 2, 'ds1D4': 3, 'other': 1, 'ds1G704-CRC': 6.
               ds1ZeroCoding 1.3.6.1.2.1.10.18.1.1.6 integer read-only
This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. ds1JammedBit refers the Jammed bit Zero Encoding, in which the AT&T specification of at least one pulse every 8 bit periods is literally implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per channel, or 1.344 Mbps, is available for data. ds1B8ZS refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits (see [14]). In this context, all eight bits in a channel are technically available for data, but care must be taken with D4 encoded data to avoid having HDLC Flag streams imitate spurious Yellow Alarm conditions. Typically, one bit per frame is ignored to force flag streams to rotate, thereby avoiding this error type. CCITT Recommendation G.703 [11] may be referred to for further definition of these. ds1InvertedHDLC refers to the practice, common on HDLC encoded DS1 data links, of inverting the data between the serial interface chip and the CSU. Since HDLC guarantees one zero every 6 bits in the worst case, while the standards call for (in effect) at least one pulse every eight, inverted HDLC enjoys 4/24 one's density on the line, which may improve the effective clock stability of a DS1 line. As with B8ZS, all eight bits in a channel are technically available for data, but care must be taken with D4 encoded data to avoid having HDLC Flag streams imitate spurious Yellow Alarm conditions. Typically, one bit per frame is ignored to force flag streams to rotate, thereby avoiding this error type. ANSI Clear Channels may use ds1ZBTSI, or Zero Byte Time Slot Interchange (see [14]). G.704 links, with or without CRC, use ds1HDB3 (see [11]). Enumeration: 'ds1B8ZS': 2, 'ds1HDB3': 4, 'ds1JammedBit': 1, 'ds1ZBTSI': 5, 'ds1InvertedHDLC': 3.
               ds1Loopback 1.3.6.1.2.1.10.18.1.1.7 integer read-only
This variable represents the loopback state of the CSU. Devices supporting read/write access should return badValue in response to a requested loopback state that the CSU does not support. The values mean: ds1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on either interface shall always return this as it's value. ds1LocalLoopbackLocalSide Signal received from the local side of the device is looped back at the local connector (eg, without involving the CSU). ds1LocalLoopbackRemoteSide Signal received from the local side of the device is looped back at the remote connector (eg, through the CSU). ds1RemoteLoopbackLocalSide Signal received from the remote side of the device is looped back at the local connector (eg, through the CSU). ds1RemoteLoopbackRemoteSide Signal received from the remote side of the device is looped back at the remote connector (eg, without involving the CSU). Enumeration: 'ds1RemoteLoopbackLocalSide': 4, 'ds1NoLoop': 1, 'ds1LocalLoopbackRemoteSide': 3, 'ds1RemoteLoopbackRemoteSide': 5, 'ds1LocalLoopbackLocalSide': 2.
               ds1SendCode 1.3.6.1.2.1.10.18.1.1.8 integer read-only
This variable indicates what type of code is being sent across the DS1 circuit by the CSU. The values mean: ds1SendNoCode sending looped or normal data ds1SendSetCode sending a loopback request ds1SendResetCode sending a loopback termination request ds1SendQRSS sending the BERT pattern described in ANSI T1.403-1989 section 5.6 ds1OtherTest sending a different BERT/BLERT pattern, such as all zeroes, all ones, etc. Enumeration: 'ds1SendQRSS': 5, 'ds1SendSetCode': 3, 'ds1SendResetCode': 4, 'ds1SendNoCode': 2, 'ds1OtherTest': 1.
               ds1YellowAlarm 1.3.6.1.2.1.10.18.1.1.9 integer read-only
This variable indicates if a Yellow Alarm condition exists. Note that G.704 interfaces do not support Yellow Alarms. Accordingly, such agents should return the value ds1NoYellowAlarm. Enumeration: 'ds1NoYellowAlarm': 1, 'ds1YellowAlarm': 2.
               ds1RedAlarm 1.3.6.1.2.1.10.18.1.1.10 integer read-only
This variable indicates if a Red Alarm condition exists. Note that G.704 interfaces do not support Red Alarms. Accordingly, such agents should return the value ds1NoRedAlarm. Enumeration: 'ds1NoRedAlarm': 1, 'ds1RedAlarm': 2.
               ds1CircuitIdentifier 1.3.6.1.2.1.10.18.1.1.11 displaystring read-only
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
       ds1IntervalTable 1.3.6.1.2.1.10.18.2 no-access
The DS1 Interval table.
           ds1IntervalEntry 1.3.6.1.2.1.10.18.2.1 no-access
An entry in the DS1 Interval table.
               ds1IntervalIndex 1.3.6.1.2.1.10.18.2.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds1CSUIndex object instance.
               ds1IntervalNumber 1.3.6.1.2.1.10.18.2.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute interval (assuming that all 96 intervals are valid).
               ds1IntervalESs 1.3.6.1.2.1.10.18.2.1.3 counter read-only
The counter associated with the number of Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals.
               ds1IntervalSESs 1.3.6.1.2.1.10.18.2.1.4 counter read-only
The counter associated with the number of Severely Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals.
               ds1IntervalSEFSs 1.3.6.1.2.1.10.18.2.1.5 counter read-only
The counter associated with the number of Severely Errored Framing Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals.
               ds1IntervalUASs 1.3.6.1.2.1.10.18.2.1.6 counter read-only
The counter associated with the number of Unavailable Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals.
               ds1IntervalCSSs 1.3.6.1.2.1.10.18.2.1.7 counter read-only
The counter associated with the number of Controlled Slip Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals.
               ds1IntervalBPVs 1.3.6.1.2.1.10.18.2.1.8 counter read-only
The counter associated with the number of Bipolar Violations, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals.
               ds1IntervalCVs 1.3.6.1.2.1.10.18.2.1.9 counter read-only
The counter associated with the number of Code Violation Error Events, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the previous 96 fifteen minute intervals. Note that D4 and G.704 (section 2.1.3.2) interfaces do not support Code Violation Error Events. Accordingly, such agents may treat this object as having an ACCESS clause value of not- accessible.
       ds1CurrentTable 1.3.6.1.2.1.10.18.3 no-access
The DS1 Current table.
           ds1CurrentEntry 1.3.6.1.2.1.10.18.3.1 no-access
An entry in the DS1 Current table.
               ds1CurrentIndex 1.3.6.1.2.1.10.18.3.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds1CSUIndex object instance.
               ds1CurrentESs 1.3.6.1.2.1.10.18.3.1.2 counter read-only
The counter associated with the number of Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval.
               ds1CurrentSESs 1.3.6.1.2.1.10.18.3.1.3 counter read-only
The counter associated with the number of Severely Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval.
               ds1CurrentSEFSs 1.3.6.1.2.1.10.18.3.1.4 counter read-only
The counter associated with the number of Severely Errored Framing Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval.
               ds1CurrentUASs 1.3.6.1.2.1.10.18.3.1.5 counter read-only
The counter associated with the number of Unavailable Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval.
               ds1CurrentCSSs 1.3.6.1.2.1.10.18.3.1.6 counter read-only
The counter associated with the number of Controlled Slip Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval.
               ds1CurrentBPVs 1.3.6.1.2.1.10.18.3.1.7 counter read-only
The counter associated with the number of Bipolar Violations, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval.
               ds1CurrentCVs 1.3.6.1.2.1.10.18.3.1.8 counter read-only
The counter associated with the number of Code Violation Error Events, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 minute interval. Note that D4 and G.704 (section 2.1.3.2) interfaces do not support Code Violation Error Events. Accordingly, such agents may treat this object as having an ACCESS clause value of not- accessible.
       ds1TotalTable 1.3.6.1.2.1.10.18.4 no-access
The DS1 Total table. 24 hour interval.
           ds1TotalEntry 1.3.6.1.2.1.10.18.4.1 no-access
An entry in the DS1 Total table.
               ds1TotalIndex 1.3.6.1.2.1.10.18.4.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds1CSUIndex object instance.
               ds1TotalESs 1.3.6.1.2.1.10.18.4.1.2 counter read-only
The counter associated with the number of Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval
               ds1TotalSESs 1.3.6.1.2.1.10.18.4.1.3 counter read-only
The counter associated with the number of Severely Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval.
               ds1TotalSEFSs 1.3.6.1.2.1.10.18.4.1.4 counter read-only
The counter associated with the number of Severely Errored Framing Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval.
               ds1TotalUASs 1.3.6.1.2.1.10.18.4.1.5 counter read-only
The counter associated with the number of Unavailable Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval.
               ds1TotalCSSs 1.3.6.1.2.1.10.18.4.1.6 counter read-only
The counter associated with the number of Controlled Slip Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval.
               ds1TotalBPVs 1.3.6.1.2.1.10.18.4.1.7 counter read-only
The counter associated with the number of Bipolar Violations, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval.
               ds1TotalCVs 1.3.6.1.2.1.10.18.4.1.8 counter read-only
The counter associated with the number of Code Violation Error Events, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24 hour interval. Note that D4 and G.704 (section 2.1.3.2) interfaces do not support Code Violation Error Events. Accordingly, such agents may treat this object as having an ACCESS clause value of not- accessible.
       ds1FracTable 1.3.6.1.2.1.10.18.5 no-access
The DS1 Fractional table.
           ds1FracEntry 1.3.6.1.2.1.10.18.5.1 no-access
An entry in the DS1 Fractional table.
               ds1FracIndex 1.3.6.1.2.1.10.18.5.1.1 integer read-only
The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds1CSUIndex object instance.
               ds1FracNumber 1.3.6.1.2.1.10.18.5.1.2 integer read-only
The channel number for this entry.
               ds1FracIfIndex 1.3.6.1.2.1.10.18.5.1.3 integer read-only
An index value that uniquely identifies an interface to a ds1. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance.