REPEATER-REV4-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: REPEATER-REV4-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CTRON-MIB-NAMES

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 repeaterrev4 1.3.6.1.4.1.52.4.1.1.1.4
     rptr 1.3.6.1.4.1.52.4.1.1.1.4.1
         rptrMgmt 1.3.6.1.4.1.52.4.1.1.1.4.1.1
             rptrMgmtName 1.3.6.1.4.1.52.4.1.1.1.4.1.1.1 displaystring read-write
The ASCII name assigned to this network.
             rptrMgmtPortCount 1.3.6.1.4.1.52.4.1.1.1.4.1.1.2 integer read-only
Total number of ports residing on this lan segment.
             rptrMgmtPortsEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3 integer read-write
Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable. Enumeration: 'noEnable': 1, 'enable': 2.
             rptrMgmtPortsOn 1.3.6.1.4.1.52.4.1.1.1.4.1.1.4 integer read-only
Get the total number of ON ports in this network.
             rptrMgmtPortsOper 1.3.6.1.4.1.52.4.1.1.1.4.1.1.5 integer read-only
Get the number of operational ports in this network.
             rptrMgmtBoardMap 1.3.6.1.4.1.52.4.1.1.1.4.1.1.6 integer read-only
Get a map of the chassis slots occupied by the boards in this network.
             rptrMgmtInterfaceNum 1.3.6.1.4.1.52.4.1.1.1.4.1.1.7 integer read-only
Get the MIBII interface number of this network. A return of zero will mean this network is not associated with a MIBII interface.
             rptrMgmtResetCounters 1.3.6.1.4.1.52.4.1.1.1.4.1.1.8 integer read-write
Setting this OID to 2 will reset the 'rptrPktStats', 'rptrProtocols' and 'rptrFrameSizes' RREV-4 branch static counters. Reading this OID will always return a 1. Enumeration: 'reseStaticCounters': 2, 'normal': 1.
         rptrStats 1.3.6.1.4.1.52.4.1.1.1.4.1.2
             rptrPktStats 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1
                 rptrPktStatsPackets 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1 counter read-only
Get this repeater's total received packets.
                 rptrPktStatsBytes 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2 counter read-only
Get this repeater's total received bytes.
                 rptrPktStatsColls 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3 counter read-only
Get this repeater's total collisions.
                 rptrPktStatsErrors 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4 counter read-only
Get this repeater's total errors.
                 rptrPktStatsAlign 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5 counter read-only
Get this repeater's total frame alignment errors.
                 rptrPktStatsCRC 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6 counter read-only
Get this repeater's total CRC errors.
                 rptrPktStatsOOW 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7 counter read-only
Get this repeater's total out-of-window collisions.
                 rptrPktStatsNoRsc 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8 counter read-only
This counter is the number of packets on this network that the hardware has processed that the management has either not seen yet, in the case of an active network, or has missed missed all together, in the case of a once active network.
                 rptrPktStatsBroadcasts 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.9 counter read-only
This counter is the number of broadcast packets on this network that the hardware has processed.
                 rptrPktStatsMulticasts 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.10 counter read-only
This counter is the number of multicast packets on this network that the hardware has processed.
             rptrProtocols 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2
                 rptrProtocolsOSI 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1 counter read-only
Get this repeater's total received OSI packets.
                 rptrProtocolsNovell 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2 counter read-only
Get this repeater's total received Novell packets.
                 rptrProtocolsBanyan 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3 counter read-only
Get this repeater's total received Banyan packets.
                 rptrProtocolsDECNet 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4 counter read-only
Get this repeater's total received DECNet packets.
                 rptrProtocolsXNS 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5 counter read-only
Get this repeater's total received XNS packets.
                 rptrProtocolsIP 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6 counter read-only
Get this repeater's total received TCP/IP packets.
                 rptrProtocolsCtron 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7 counter read-only
Get this repeater's total received CTRON Management packets.
                 rptrProtocolsAppletalk 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8 counter read-only
Get this repeater's total received Appletalk packets.
                 rptrProtocolsOther 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9 counter read-only
Get this repeater's total received unknown protocol packets.
             rptrFrameSizes 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3
                 rptrFrameSzRunt 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1 counter read-only
Get this repeater's total received packets of size less than 64 bytes.
                 rptrFrameSz64To127 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2 counter read-only
Get this repeater's total received packets of size between 64 and 127 bytes.
                 rptrFrameSz128To255 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3 counter read-only
Get this repeater's total received packets of size between 128 and 255 bytes.
                 rptrFrameSz256To511 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4 counter read-only
Get this repeater's total received packets of size between 256 and 511 bytes.
                 rptrFrameSz512To1023 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5 counter read-only
Get this repeater's total received packets of size between 512 and 1023 bytes.
                 rptrFrameSz1024To1518 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6 counter read-only
Get this repeater's total received packets of size between 1024 and 1518 bytes.
                 rptrFrameSzGiant 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7 counter read-only
Get this repeater's total received packets of size greater than 1518 bytes.
         rptrAlarms 1.3.6.1.4.1.52.4.1.1.1.4.1.3
             rptrAlarmsTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 integer read-write
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. Enumeration: 'enable': 2, 'disable': 1.
             rptrAlarmsTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 integer read-write
The maximum number of packets that will be allowed before an alarm is generated.
             rptrAlarmsCollEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.3 integer read-write
Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. Enumeration: 'enable': 2, 'disable': 1.
             rptrAlarmsCollThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4 integer read-write
The collision threshold is the maximum number of collisions within the time base that will be allowed before an alarm is generated.
             rptrAlarmsErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.5 integer read-write
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. Enumeration: 'enable': 2, 'disable': 1.
             rptrAlarmsErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 integer read-write
The percentage of errors per good packet within the timebase that will cause an alarm. The units of this value is in seconds.
             rptrAlarmsErrSource 1.3.6.1.4.1.52.4.1.1.1.4.1.3.7 integer read-write
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5
             rptrAlarmsAlarmTimebase 1.3.6.1.4.1.52.4.1.1.1.4.1.3.8 integer read-write
The alarm timebase, in seconds.
             rptrAlarmsBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.9 integer read-write
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. Enumeration: 'enable': 2, 'disable': 1.
             rptrAlarmsBroadThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.10 integer read-write
The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated.
         rptrRedundancy 1.3.6.1.4.1.52.4.1.1.1.4.1.4
             rptrRedund 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1
                 rptrRedundReset 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1 integer read-write
If this object is set to Reset it will cause a reset of the redundancy object to occur. Setting this object to NoReset will do nothing. This object will always be read as NoReset. Enumeration: 'reset': 2, 'noReset': 1.
                 rptrRedundPollInterval 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 integer read-write
Get/Set the number of seconds between polls for redundancy.
                 rptrRedundTestTOD 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3 displaystring read-write
Get/Set the time of day at which the redundant circuits will be tested. The format of the time string is hh:mm:ss.
                 rptrRedundPerformTest 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4 integer read-write
If this object is set to Test it will cause a test of the redundant circuits to be performed. Setting this object to NoTest will have no effect. When read this object will always return NoTest. Enumeration: 'test': 2, 'noTest': 1.
                 rptrRedundMaxCrcts 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5 integer read-only
Returns the maximum number of circuits which may exist on this network.
             rptrRedundCrctTable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 no-access
A list of redundant circuit objects for this repeater.
                 rptrRedundCrctEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 no-access
A list of objects for a particular redundant circuit.
                     rptrRedundCrctId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1 integer read-only
Returns the index for a member circuit in the table of redundant circuits.
                     rptrRedundCrctName 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2 octet string read-write
Get/Set the name of the indicated circuit.
                     rptrRedundCrctRetrys 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3 integer read-write
Get/Set the the number of unanswered polls allowed for the circuit.
                     rptrRedundCrctNumBPs 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4 integer read-only
Get the number of board/port combinations associated with the circuit.
                     rptrRedundCrctNumAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5 integer read-only
Get the number of IP Addresses associated with the circuit.
                     rptrRedundCrctAddAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6 ipaddress read-write
Add an IP Address to the polling list for the indicated circuit.
                     rptrRedundCrctDelAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7 ipaddress read-write
Delete an IP Address from the polling list of the indicated circuit.
                     rptrRedundCrctEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8 integer read-write
If this object is set to Enable, the circuit is enabled. If this object is set to Disable, the circuit is disbabled. When read, this object returns the state of the object based on the last request made. Enumeration: 'enable': 2, 'disable': 1.
                     rptrRedundCrctReset 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 integer read-write
If this object is set to Reset, the circuit is reset. All of the circuit's associated boards and ports are returned to NOT_USED, any associated IP Addresses are purged from the circuit's address list, the name is cleared, and the retry count is reset to a default value. Setting this object to NoReset has no effect. When read, NoReset is always returned. Enumeration: 'reset': 2, 'noReset': 1.
             rptrRedundPortTable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3 no-access
A list of redundant port objects for this repeater.
                 rptrRedundPortEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1 no-access
A redundant port entry containing objects pertaining to a particular redundant port.
                     rptrRedundPortId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1 integer read-only
A unique value identifying an element in a sequence of member ports which belong to a circuit in the table of redundant circuits. This value is not a port number; rather it is a value which goes from 1 to the maximum number of ports which may be included in a redundant circuit.
                     rptrRedundPortCrctId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2 integer read-only
A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId.
                     rptrRedundPortNum 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3 integer read-only
Returns the port number of a member port belonging to a redundant circuit.
                     rptrRedundPortBoardNum 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4 integer read-only
Returns the board number of a member port belonging to a redundant circuit.
                     rptrRedundPortType 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5 integer read-only
Return the state of a port associated with the indicated circuit. Enumeration: 'notUsed': 1, 'backup': 3, 'primary': 2.
             rptrRedundAddrTable 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4 no-access
A list of redundant IP Address objects which belong to a circuit for this repeater.
                 rptrRedundAddrEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1 no-access
A entry containing objects pertaining to a particular redundant IP Address which belongs to a circuit.
                     rptrRedundAddrId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1 integer read-only
A unique value identifying an element in a sequence of member IP Addresses which belong to a circuit in the table of redundant circuits. This value goes from 1 to the maximum number of IP Addresses which may be included in a redundant circuit.
                     rptrRedundAddrCrctId 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2 integer read-only
A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId.
                     rptrRedundAddrIPAddr 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3 ipaddress read-only
Returns an IP Address associated with the indicated circuit.
         rptrSourceAddress 1.3.6.1.4.1.52.4.1.1.1.4.1.5
             rptrSrcAddrListTable 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1 no-access
This table defines the source address list that is defined at the repeater level.
                 rptrSrcAddrListEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1 no-access
Defines a specific source address object.
                     rptrSrcAddrListId 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1 integer read-only
Returns an index into a table of source address seen by this repeater.
                     rptrSrcAddrAddressList 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2 octet string read-only
Returns a source address seen by this repeater.
             rptrSrcAddrSrcTable 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2 no-access
This table defines the list of all source addresses that have been seen.
                 rptrSrcAddrSrcTableEntry 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1 no-access
Describes a particular source address source entry.
                     rptrSrcAddrSrcTableEntryId 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1 octet string read-only
Returns the source address to which this table's information pertains.
                     rptrSrcAddrSrcTableEntryPort 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2 integer read-only
Returns the port# of the port that sourced the source address.
                     rptrSrcAddrSrcTableEntryPortGroup 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3 integer read-only
Returns the port group# of the port that sourced the source address.
             rptrSrcAddrMgmt 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3
                 rptrSrcAddrMgmtSrcAgeInterval 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1 integer read-write
Get/Set source addressing ageing interval.
                 rptrSrcAddrMgmtPortLock 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2 integer read-write
Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'lock': 2, 'unlock': 1, 'portMisMatch': 3.
                 rptrSrcAddrMgmtActiveUsers 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3 integer read-only
Get the number of active users on this network.
                 rptrSrcAddrMgmtHashType 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.4 integer read-write
Defines the type of hashing that will be used for source address management. In a DEC-NET environment or a combination fo DEC-NET and non DEC-NET users where source address hash access is a concern a value of decHash(2) may yield better results. For non DEC-NET users a value of noDecHash(1) is preferred. Enumeration: 'noDecHash': 1, 'decHash': 2.
         rptrTrap 1.3.6.1.4.1.52.4.1.1.1.4.1.6
             rptrHwTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1
                 rptrHwTrapSetLink 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1 integer read-write
Enables and disables link traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetLink for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetLink for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetLink for this network are not currently set to a value the same value. Enumeration: 'enable': 2, 'disable': 1, 'other': 3.
                 rptrHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 integer read-write
Enables and disables segmentation traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this network are not currently set to a value the same value. Enumeration: 'enable': 2, 'disable': 1, 'other': 3.
             rptrSaTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2
                 rptrSaTrapSetSrcaddr 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2.1 integer read-write
Enables and disables source address traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortSaTrapSetSrcaddr for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortSaTrapSetSrcaddr for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortSaTrapSetSrcaddr for this network are not currently set to a value the same value. Enumeration: 'enable': 2, 'disable': 1, 'other': 3.
         rptrSaSecurity 1.3.6.1.4.1.52.4.1.1.1.4.1.7
             rptrSecurityLockState 1.3.6.1.4.1.52.4.1.1.1.4.1.7.1 integer read-write
Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'lock': 2, 'unlock': 1, 'portMisMatch': 3.
             rptrSecuritySecureState 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2 integer read-only
The status of source address security of the network. Ports on the network that are secure(1), can be locked in order to enable security. nonSecure(2) ports cannot be locked. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'portMisMatch': 3, 'secure': 1, 'nonSecure': 2.
             rptrSecurityLearnState 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 integer read-write
The learn state of the network. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the ports and learning begins once again. If it is set to noLearn(2), learning stops on the port. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'portMisMatch': 3, 'noLearn': 2, 'learn': 1.
             rptrSecurityLearnMode 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 integer read-write
Get/Set the learn mode of the network. If set to onetime learn mode oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous learn continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with the latest source address it sees. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'oneTime': 1, 'portMisMatch': 3, 'continuous': 2.
     rptrPortGroup 1.3.6.1.4.1.52.4.1.1.1.4.2
         rptrPortGrpMgmtTable 1.3.6.1.4.1.52.4.1.1.1.4.2.1 no-access
A list of port management objects for this repeater node.
             rptrPortGrpMgmtEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1 no-access
An entry containing objects pertaining to port management for a port group.
                 rptrPortGrpMgmtGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortGrpMgmtName 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2 displaystring read-write
Gets/Sets a name for the specified port group.
                 rptrPortGrpMgmtPortCount 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3 integer read-only
Get total number of ports contained on the board. Notice that this is the physical port count.
                 rptrPortGrpMgmtPortsEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4 integer read-write
Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable. Enumeration: 'noEnable': 1, 'enable': 2.
                 rptrPortGrpMgmtPortsOn 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5 integer read-only
Get total number of ON ports in this port group.
                 rptrPortGrpMgmtPortsOper 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6 integer read-only
Get total number of operational ports in the port group.
                 rptrPortGrpMgmtLogPortCount 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7 integer read-only
Get total number of ports contained in this port group.
         rptrPortGrpStats 1.3.6.1.4.1.52.4.1.1.1.4.2.2
             rptrPortGrpPktStatsTbl 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1 no-access
This table provides packet statistics for port group.
                 rptrPortGrpPktStatsEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1 no-access
Defines a specific packet statistics entry.
                     rptrPortGrpPktStatsId 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                     rptrPortGrpPktStatsPkts 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2 counter read-only
Return this port group's total received packets.
                     rptrPortGrpPktStatsBytes 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3 counter read-only
Return this port group's total received bytes.
                     rptrPortGrpPktStatsColls 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4 counter read-only
Return this port group's total collisions.
                     rptrPortGrpPktStatsErrors 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5 counter read-only
Return this port group's total errors.
                     rptrPortGrpPktStatsAlign 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6 counter read-only
Return this port group's total frame alignment errors.
                     rptrPortGrpPktStatsCRC 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7 counter read-only
Return this port group's total CRC errors.
                     rptrPortGrpPktStatsOOW 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8 counter read-only
Return this port group's total out-of-window collisions.
                     rptrPortGrpPktStatsBroadcasts 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9 counter read-only
Return this port group's total received broadcast packets.
                     rptrPortGrpPktStatsMulticasts 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10 counter read-only
Return this port group's total received multicast packets.
             rptrPortGrpProtocolTbl 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2 no-access
Provides port group protocol statistics.
                 rptrPortGrpProtocolEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1 no-access
Defines a specific port group protocol statistics entry.
                     rptrPortGrpProtocolId 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                     rptrPortGrpProtocolOSI 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2 counter read-only
Return this port group's total received OSI packets.
                     rptrPortGrpProtocolNovell 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3 counter read-only
Return this port group's total received Novell packets.
                     rptrPortGrpProtocolBanyan 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4 counter read-only
Return this port group's total received Banyan packets.
                     rptrPortGrpProtocolDECNet 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5 counter read-only
Return this port group's total received DECNet packets.
                     rptrPortGrpProtocolXNS 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6 counter read-only
Return this port group's total received XNS packets.
                     rptrPortGrpProtocolIP 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7 counter read-only
Return this port group's total received TCP/IP packets.
                     rptrPortGrpProtocolCtron 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8 counter read-only
Return this port group's total received CTRON Management packets.
                     rptrPortGrpProtocolAppletalk 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9 counter read-only
Return this port group's total received Appletalk packets.
                     rptrPortGrpProtocolOther 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10 counter read-only
Return this port group's total received unknown protocol packets.
             rptrPortGrpFrameSzTbl 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3 no-access
Defines frame sizes as seen by this port group.
                 rptrPortGrpFrameSzEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1 no-access
Defines a particular frame size entry.
                     rptrPortGrpFrameSzId 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                     rptrPortGrpFrameSzRunt 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2 counter read-only
Return this port group's total received packets of size less than 64 bytes.
                     rptrPortGrpFrameSz64To127 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3 counter read-only
Return this port group's total received packets of size between 64 and 127 bytes.
                     rptrPortGrpFrameSz128To255 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4 counter read-only
Return this port group's total received packets of size between 128 and 255 bytes.
                     rptrPortGrpFrameSz256To511 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5 counter read-only
Return this port group's total received packets of size between 256 and 511 bytes.
                     rptrPortGrpFrameSz512To1023 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6 counter read-only
Return this port group's total received packets of size between 512 and 1023 bytes.
                     rptrPortGrpFrameSz1024To1518 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7 counter read-only
Return this port group's total received packets of size between 1024 and 1518 bytes.
                     rptrPortGrpFrameSzGiant 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8 counter read-only
Return this port group's total received packets of size greater than 1518 bytes.
         rptrPortGrpAlarmTable 1.3.6.1.4.1.52.4.1.1.1.4.2.3 no-access
A list of port group alarm objects for this repeater node.
             rptrPortGrpAlarmEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 no-access
An entry containing objects pertaining to port group alarms for a port group.
                 rptrPortGrpAlarmId 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortGrpAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 integer read-write
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 integer read-write
The maximum number of packets that will be allowed before an alarm is generated.
                 rptrPortGrpAlarmTrafGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4 integer read-write
Set will permit a port group to be disabled on a traffic alarm condition. Get will show whether the port group disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmCollEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5 integer read-write
Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmCollThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6 integer read-write
The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated.
                 rptrPortGrpAlarmCollBdDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7 integer read-write
Set will permit a port group to be disabled on a collision alarm condition. Get will show whether the port group disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8 integer read-write
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 integer read-write
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm.
                 rptrPortGrpAlarmErrSource 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10 integer read-write
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5
                 rptrPortGrpAlarmErrGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 integer read-write
Set will permit a port group to be disabled on an error alarm condition. Get will show whether the port group disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12 integer read-write
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortGrpAlarmBroadThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13 integer read-write
The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated.
                 rptrPortGrpAlarmBroadGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14 integer read-write
Set will permit a port group to be disabled on a broadcast alarm condition. Get will show whether the port group disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
         rptrPortGrpSrcAddrTable 1.3.6.1.4.1.52.4.1.1.1.4.2.4 no-access
This table provides a list of the number of active users that have been seen by port group.
             rptrPortGrpSrcAddrEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1 no-access
Defines a specific active user entry.
                 rptrPortGrpSrcAddrId 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortGrpSrcAddrActiveUsers 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2 integer read-only
Returns the total number of active users seen by this port group.
         rptrPortGrpTrap 1.3.6.1.4.1.52.4.1.1.1.4.2.5
             rptrPortGrpHwTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1
                 rptrPortGrpHwTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1 no-access
A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group.
                     rptrPortGrpHwTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1 no-access
Individual trap entries for port group enable/disable.
                         rptrPortGrpHwTrapSetGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                         rptrPortGrpHwTrapSetLink 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2 integer read-write
Enables and disables link traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetLink for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetLink for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetLink for this port group are not currently set to a value the same value. Enumeration: 'enable': 2, 'disable': 1, 'other': 3.
                         rptrPortGrpHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3 integer read-write
Enables and disables segmentation traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this port group are not currently set to a value the same value. Enumeration: 'enable': 2, 'disable': 1, 'other': 3.
             rptrPortGrpSaTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2
                 rptrPortGrpSaTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1 no-access
A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group.
                     rptrPortGrpSaTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1 no-access
Individual trap entries for port group enable/disable.
                         rptrPortGrpSaTrapSetGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1 integer read-only
Returns an index to a port group for which the information in this table pertains.
                         rptrPortGrpSaTrapSetSrcaddr 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2 integer read-write
Enables and disables source address traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rtprPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rtprPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortSaTrapSetSrcaddr for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortSaTrapSetSrcaddr for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortSaTrapSetSrcaddr for this port group are not currently set to a value the same value. Enumeration: 'enable': 2, 'disable': 1, 'other': 3.
         rptrPortGrpSrcAddrLockTable 1.3.6.1.4.1.52.4.1.1.1.4.2.6 no-access
This table defines the status of the port group source address security locks.
             rptrPortGrpSrcAddrLockEntry 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1 no-access
DeDefines a status of a particular port group security lock.
                 rptrPortGrpSrcAddrLockGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1 integer read-only
Defines a particular port group for which this source address security lock information pertains.
                 rptrPortGrpSrcAddrLock 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2 integer read-write
Allows setting of the security lock status for this port group. unlock(1) - Unlocks the source address lock this group, lock(2) - Locks the source address for this group, Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'lock': 2, 'unlock': 1, 'portMisMatch': 3.
                 rptrPortGrpSASecuritySecureState 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3 integer read-only
The state of the source addressing security for this port group. Ports on the port group that are secure(1), can be locked in order to enable security. When a value of nonSecure(2) is returned ports cannot be locked. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'portMisMatch': 3, 'secure': 1, 'nonSecure': 2.
                 rptrPortGrpSASecurityLearnState 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4 integer read-write
The learn state of source addressing security for this port group. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'portMisMatch': 3, 'noLearn': 2, 'learn': 1.
                 rptrPortGrpSASecurityLearnMode 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5 integer read-write
The learn mode of source addressing security port group. If set to oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with latest source address it sees. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. Enumeration: 'oneTime': 1, 'portMisMatch': 3, 'continuous': 2.
     rptrPort 1.3.6.1.4.1.52.4.1.1.1.4.3
         rptrPortMgmtTable 1.3.6.1.4.1.52.4.1.1.1.4.3.1 no-access
A list of port management objects for this repeater node.
             rptrPortMgmtEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1 no-access
An entry containing objects pertaining to port management for a port.
                 rptrPortMgmtPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                 rptrPortMgmtPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortMgmtName 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3 displaystring read-write
Sets/Gets an ASCII name assigned to this port.
                 rptrPortMgmtAdminState 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4 integer read-write
Setting this object to Enable will cause port to be enabled. Setting this object to Disable will cause the port to be disabled. When read this object will return the state of the object per the last request. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortMgmtOperState 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5 integer read-only
Get port operational status. Enumeration: 'notOperational': 1, 'operational': 2.
                 rptrPortMgmtPortType 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6 object identifier read-only
Uniquely defines the repeater port type. A authoritative identification for a port type. By convention, this value is allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and unambiguous means to determine the type of repeater port.
         rptrPortStats 1.3.6.1.4.1.52.4.1.1.1.4.3.2
             rptrPortPktStatsTbl 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1 no-access
Provides repeater port packet statistics.
                 rptrPortPktStatsEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1 no-access
Provides basic statistics for a specific port.
                     rptrPortPktStatsPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                     rptrPortPktStatsPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                     rptrPortPktStatsPackets 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3 counter read-only
Get this port's total received packets.
                     rptrPortPktStatsBytes 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4 counter read-only
Get this port's total received bytes.
                     rptrPortPktStatsColls 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5 counter read-only
Get this port's total collisions.
                     rptrPortPktStatsErrors 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6 counter read-only
Get this port's total errors.
                     rptrPortPktStatsAlign 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7 counter read-only
Get this port's total frame alignment errors.
                     rptrPortPktStatsCRC 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8 counter read-only
Get this port's total CRC errors.
                     rptrPortPktStatsOOW 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9 counter read-only
Get this port's total out-of-window collisions.
                     rptrPortPktStatsBroadcasts 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10 counter read-only
Get this port's total received broadcast packets.
                     rptrPortPktStatsMulticasts 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11 counter read-only
Get this port's total received multicast packets.
             rptrPortProtocolTbl 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2 no-access
Provides statistics about the protocols seen by the different ports.
                 rptrPortProtocolEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1 no-access
An entry containing objects pertaining to statistics about protocols seen by different ports.
                     rptrPortProtocolPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                     rptrPortProtocolPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                     rptrPortProtocolOSI 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3 counter read-only
Get this port's total received OSI protocol packets.
                     rptrPortProtocolNovell 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4 counter read-only
Get this port's total received Novell protocol packets.
                     rptrPortProtocolBanyan 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5 counter read-only
Get this port's total received Banyan protocol packets.
                     rptrPortProtocolDECNet 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6 counter read-only
Get this port's total received DECNet protocol packets.
                     rptrPortProtocolXNS 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7 counter read-only
Get this port's total received XNS protocol packets.
                     rptrPortProtocolIP 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8 counter read-only
Get this port's total received TCP/IP protocol packets.
                     rptrPortProtocolCtron 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9 counter read-only
Get this port's total received CTRON Management protocol packets.
                     rptrPortProtocolAppletalk 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10 counter read-only
Get this port's total received Appletalk protocol packets.
                     rptrPortProtocolOther 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11 counter read-only
Get this port's total received unknown protocol packets.
             rptrPortFrameSzTbl 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3 no-access
Provides repeater port frame size statistics.
                 rptrPortFrameSzEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1 no-access
Describes a set of frame size statistics for a specific port.
                     rptrPortFrameSzPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                     rptrPortFrameSzPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                     rptrPortFrameSzRunt 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3 counter read-only
Get this port's total received packets of size less than 64 bytes.
                     rptrPortFrameSz64To127 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4 counter read-only
Get this port's total received packets of size between 64 and 127 bytes.
                     rptrPortFrameSz128To255 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5 counter read-only
Get this port's total received packets of size between 128 and 255 bytes.
                     rptrPortFrameSz256To511 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6 counter read-only
Get this port's total received packets of size between 256 and 511 bytes.
                     rptrPortFrameSz512To1023 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7 counter read-only
Get this port's total received packets of size between 512 and 1023 bytes.
                     rptrPortFrameSz1024To1518 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8 counter read-only
Get this port's total received packets of size between 1024 and 1518 bytes.
                     rptrPortFrameSzGiant 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9 counter read-only
Get this port's total received packets of size greater than 1518 bytes.
         rptrPortAlarmTable 1.3.6.1.4.1.52.4.1.1.1.4.3.3 no-access
A list of port alarm objects for this repeater node.
             rptrPortAlarmEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 no-access
An entry containing objects pertaining to port alarm objects for a port group.
                 rptrPortAlarmPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                 rptrPortAlarmPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 integer read-write
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4 integer read-write
The maximum number of packets that will be allowed before an alarm is generated.
                 rptrPortAlarmTrafPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 integer read-write
Set will permit a port to be disabled on a traffic alarm condition. Get will show whether the port disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmCollEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6 integer read-write
Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmCollThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7 integer read-write
The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated.
                 rptrPortAlarmCollPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 integer read-write
Set will permit a port to be disabled on a collision alarm condition. Get will show whether the port disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 integer read-write
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 integer read-write
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm.
                 rptrPortAlarmErrSource 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 integer read-write
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5
                 rptrPortAlarmErrPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12 integer read-write
Set will permit a port to be disabled on an error alarm condition. Get will show whether the port disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13 integer read-write
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. Enumeration: 'enable': 2, 'disable': 1.
                 rptrPortAlarmBroadThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14 integer read-write
The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated.
                 rptrPortAlarmBroadPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15 integer read-write
Set will permit a port to be disabled on a broadcast alarm condition. Get will show whether the port disabling is allowed or not. Enumeration: 'enable': 2, 'disable': 1.
         rptrPortRedundTable 1.3.6.1.4.1.52.4.1.1.1.4.3.4 no-access
A list of port redundancy objects for this repeater node.
             rptrPortRedundEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1 no-access
An entry containing objects pertaining to port redundancy for a port group.
                 rptrPortRedundPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                 rptrPortRedundPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortRedundCrctNum 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3 integer read-write
Get/Set redundant circuit number of redundant circuit that port is or is to be associated with.
                 rptrPortRedundType 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4 integer read-write
Get/Set redundant port type. Enumeration: 'notUsed': 1, 'backup': 3, 'primary': 2.
                 rptrPortRedundStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5 integer read-write
Get/Set redundant port status. Enumeration: 'active': 2, 'notUsed': 1, 'inactive': 3.
         rptrPortSrcAddrTable 1.3.6.1.4.1.52.4.1.1.1.4.3.5 no-access
A list of port source address objects for this repeater node.
             rptrPortSrcAddrEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1 no-access
An entry containing objects pertaining to port source address objects for a port group.
                 rptrPortSrcAddrPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                 rptrPortSrcAddrPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortSrcAddrTopoState 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3 integer read-only
Returns the topological state of the port. Enumeration: 'station': 1, 'trunk': 2.
                 rptrPortSrcAddrForceTrunk 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4 integer read-write
When this object is set to Force it causes the port to be placed into a Trunk topological state whether the network traffic would warrant such a state or not. When this object is set to NoForce it allows the port to assume the topological state it would naturally assume based on the network activity across it. When read this object reports the current setting. Enumeration: 'noForce': 1, 'force': 2.
                 rptrPortSrcAddrActiveUsers 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5 integer read-only
Returns the total number of active users seen by this port.
         rptrPortSrcAddrListTable 1.3.6.1.4.1.52.4.1.1.1.4.3.6 no-access
This table provides information about the source addresses that have been seen by the differnt ports.
             rptrPortSrcAddrListEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1 no-access
A specific source address that has been seen
                 rptrPortSrcAddrListId 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1 integer read-only
Returns an index associated with the number of address to be returned.
                 rptrPortSrcAddrListPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2 integer read-only
Returns an index to a port for which the information in this table pertains.
                 rptrPortSrcAddrListPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortSrcAddrAddressList 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4 octet string read-only
Returns a source address seen on this port.
         rptrPortHardwareTable 1.3.6.1.4.1.52.4.1.1.1.4.3.7 no-access
A list of port hardware objects for this repeater port.
             rptrPortHardwareEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1 no-access
An entry containing objects pertaining to port hardware for a hardware port group.
                 rptrPortHardwarePortId 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                 rptrPortHardwarePortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                 rptrPortHardwareSegStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3 integer read-only
Returns port segmentation status. Enumeration: 'segmented': 2, 'notSegmented': 1.
                 rptrPortHardwareLinkStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4 integer read-only
Returns port link status. Enumeration: 'notApplicable': 3, 'notLinked': 1, 'linked': 2.
         rptrPortTrap 1.3.6.1.4.1.52.4.1.1.1.4.3.8
             rptrPortHwTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1
                 rptrPortHwTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1 no-access
A list of trap enable/disable at the port level.
                     rptrPortHwTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1 no-access
Individual trap entries for port group enable/disable.
                         rptrPortHwTrapSetPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                         rptrPortHwTrapSetPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                         rptrPortHwTrapSetLink 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3 integer read-write
Enables and disables link traps for this port. Enumeration: 'enable': 2, 'disable': 1.
                         rptrPortHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4 integer read-write
Enables and disables segmentation traps for this port. Enumeration: 'enable': 2, 'disable': 1.
             rptrPortSaTrapSet 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2
                 rptrPortSaTrapTable 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1 no-access
A list of trap enable/disable at the port level
                     rptrPortSaTrapEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1 no-access
Individual trap entries for port group enable/disable.
                         rptrPortSaTrapSetPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1 integer read-only
Returns an index to a port for which the information in this table pertains.
                         rptrPortSaTrapSetPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2 integer read-only
Returns an index to a port group for which the information in this table pertains.
                         rptrPortSaTrapSetSrcaddr 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3 integer read-write
Enables and disables source address traps for this port. Enumeration: 'enable': 2, 'disable': 1.
         rptrPortSecurity 1.3.6.1.4.1.52.4.1.1.1.4.3.9
             rptrPortSecurityTable 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1 no-access
This table defines status of the source lock security.
                 rptrPortSecurityEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1 no-access
Defines lock status for this particular entry.
                     rptrPortSecurityPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1 integer read-only
The port Group ID for which this source address lock entry pertains.
                     rptrPortSecurityPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2 integer read-only
The port ID for which this source address lock entry pertains.
                     rptrPortSecurityLockStatus 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3 integer read-write
Defines the lock status for this particular port entry. Enumeration: 'lock': 2, 'unlock': 1.
                     rptrPortSecurityLockAddAddress 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 octet string read-write
Setting a value to this object will cause a new entry to be added to the rptrPortSecurityListTable. When read this object will display an OCTET STRING of SIZE 6 with each octet containing a 0. In general it is possible to add addresses at anytime. However there are several instances where the firmware and or hardware can not support the operation. In these instances an error will be returned if a addition is attempted.
                     rptrPortSecurityLockDelAddress 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5 octet string read-write
Setting a value to this object will cause corresponding entry in the rptrPortSecurityListTable to be deleted. When read this object returns an OCTET STRING of length 6 with each octet having the value '0'. In general it is possible to delete locked addresses at any time. however there are instances where it is not supported in which case an error will be returned.
                     rptrPortSecurityDisableOnViolation 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6 integer read-write
Designates whether port is disabled if its source address is violated. A source address violation occurs when a address is detected which is not in the source address list for this port. If the port is disabled due to the source address violation it can be enabled by setting rptrPortMgmtAdminState. Enumeration: 'noDisable': 1, 'disable': 2.
                     rptrPortSecurityFullSecEnabled 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7 integer read-write
A port that is set to full security and is locked will scramble ALL packets, which are not contained in the expected address list, including broadcasts and multicasts. A port that is set to partial security will allow broadcasts and multicasts to repeat unscrambled. Enumeration: 'partialSecurity': 1, 'fullSecurity': 2.
                     rptrPortSecuritySecureState 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8 integer read-only
The secure state of the port. If the port is secure(1), it can be locked in order to enable security. A nonSecure(2) port cannot be locked. Enumeration: 'secure': 1, 'nonSecure': 2.
                     rptrPortSecurityForceNonSecure 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9 integer read-write
The force non-secure state of port. If the port is Forced, Non-Secure via a value of forceNonSecure(2), it is put into a Non-Secure state, in which case it cannot be locked. If a port is not forced noForce(1), then it will take on its natural state, according to the traffic flow on the port. Enumeration: 'noForce': 1, 'forceNonSecure': 2.
                     rptrPortSecurityLearnState 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10 integer read-write
The learn state of the port. This object will only be applied to a port that is unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port. Enumeration: 'noLearn': 2, 'learn': 1.
                     rptrPortSecurityLearnMode 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11 integer read-write
The learn mode of the port. If set to oneTime(1), the port is capable of learning two addresses and securing on both destination and source addresses (upon locking port). If set to continuous(2), all addresses are initially deleted and the port continuously replaces the existing secure source address with the latest source address it sees. Enumeration: 'oneTime': 1, 'continuous': 2.
             rptrPortSecurityListTable 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2 no-access
This table defines a list of all source address locks maintained for the specified port.
                 rptrPortSecurityListEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1 no-access
An entry containing objects pertaining to source address locks for a port group.
                     rptrPortSecurityListPortGrpId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1 integer read-only
The port group for which this security list entry pertains.
                     rptrPortSecurityListPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2 integer read-only
The port ID for which this source address lock list pertains.
                     rptrPortSecurityListIndex 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3 integer read-only
A unique index for the source address entries.
                     rptrPortSecurityListAddress 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4 octet string read-only
Defines the particular source address that has been locked.
     rptrPortAssoc 1.3.6.1.4.1.52.4.1.1.1.4.4
         rptrPortAssocTable 1.3.6.1.4.1.52.4.1.1.1.4.4.1 no-access
This table defines the port association for those switching MIMs that support this functionality.
             rptrPortAssocEntry 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1 no-access
Describes a particular port association entry.
                 rptrPortAssocBoard 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1 integer read-only
The board number for which this port association information pertains.
                 rptrPortAssocStatus 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2 integer read-write
This object describes the status of the user selectable port. On a TPXMIM34 this is port 13 which may either be an EPIM or default configuration. A value of defaultPort(1) restores the default configuration. A value of otherPort(2) may imply the use of the EPIM connection. Enumeration: 'defaultPort': 1, 'otherPort': 2.