REDSTONE-IF-MIB: View SNMP OID List / Download MIB

VENDOR: REDSTONE COMMUNICATIONS


 Home MIB: REDSTONE-IF-MIB
Download as:   
SNMPv2-CONF, REDSTONE-SMI, IF-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rsIfMIB 1.3.6.1.4.1.2773.2.3
The Generic Interfaces MIB for the Redstone Communications Inc. enterprise.
     rsInterfaces 1.3.6.1.4.1.2773.2.3.1
         rsIf 1.3.6.1.4.1.2773.2.3.1.1
             rsIfObjects 1.3.6.1.4.1.2773.2.3.1.1.1
                 rsIfTable 1.3.6.1.4.1.2773.2.3.1.1.1.1 no-access
This table contains a corresponding entry for each entry found in the standard Generic Interfaces MIB ifTable/ifXTable. The entries in this table contain supplementary generic interface characteristics. Entries in ifTable/ifXTable and in this table are created/deleted as a consequence of hardware detection, or of management configuration via standard or enterprise type-specific interface MIBs.
                     rsIfEntry 1.3.6.1.4.1.2773.2.3.1.1.1.1.1 no-access
An entry representing an interface's enterprise-defined generic interface characteristics.
                         rsIfType 1.3.6.1.4.1.2773.2.3.1.1.1.1.1.1 rsiftype read-only
Identifies the type of this interface.
                 rsIfInvStackTable 1.3.6.1.4.1.2773.2.3.1.1.1.2 no-access
A table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'underneath' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs underneath the sub-layer with ifIndex value y, then this table contains: rsIfInvStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.x.0=active ifStackStatus.0.x=active This table contains exactly the same number of rows as the ifStackTable, but the rows appear in a different order.
                     rsIfInvStackEntry 1.3.6.1.4.1.2773.2.3.1.1.1.2.1 no-access
Information on a particular relationship between two sub- layers, specifying that one sub-layer runs underneath the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
                         rsIfInvStackStatus 1.3.6.1.4.1.2773.2.3.1.1.1.2.1.1 rowstatus read-only
The status of the relationship between two sub-layers. An instance of this object exists for each instance of the ifStackStatus object, and vice versa. For example, if the variable ifStackStatus.H.L exists, then the variable rsIfInvStackStatus.L.H must also exist, and vice versa. In addition, the two variables always have the same value. However, unlike ifStackStatus, the rsIfInvStackStatus object is NOT write-able. A network management application wishing to change a relationship between sub-layers H and L cannot do so by modifying the value of rsIfInvStackStatus.L.H, but must instead modify the value of ifStackStatus.H.L. After the ifStackTable is modified, the change will be reflected in this table.
             rsIfConformance 1.3.6.1.4.1.2773.2.3.1.1.4
                 rsIfCompliances 1.3.6.1.4.1.2773.2.3.1.1.4.1
                     rsIfCompliance 1.3.6.1.4.1.2773.2.3.1.1.4.1.1
The compliance statement for entities which implement the Redstone Generic Interfaces MIB.
                 rsIfGroups 1.3.6.1.4.1.2773.2.3.1.1.4.2
                     rsIfGroup 1.3.6.1.4.1.2773.2.3.1.1.4.2.1
A collection of objects providing management capability capability of generic interfaces in a Redstone product.
                     rsIfInvStackGroup 1.3.6.1.4.1.2773.2.3.1.1.4.2.2
A collection of objects providing inverted information on the layering of MIB-II interfaces.