RC-POS-MIB: View SNMP OID List / Download MIB

VENDOR: RAPID CITY COMMUNICATION


 Home MIB: RC-POS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, RAPID-CITY, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcStatPos 1.3.6.1.4.1.2272.1.12.8
     rcStatPosControlTable 1.3.6.1.4.1.2272.1.12.8.1 no-access
         rcStatPosControlEntry 1.3.6.1.4.1.2272.1.12.8.1.1 no-access
             rcStatPosControlPortIndex 1.3.6.1.4.1.2272.1.12.8.1.1.1 interfaceindex read-only
A unique value for each port.
             rcStatPosControlInErrors 1.3.6.1.4.1.2272.1.12.8.1.1.2 counter32 read-only
The total number of error pkts received on the interface.
             rcStatPosControlInUnknownProtos 1.3.6.1.4.1.2272.1.12.8.1.1.3 counter32 read-only
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
             rcStatPosControlOutErrors 1.3.6.1.4.1.2272.1.12.8.1.1.4 counter32 read-only
The number of outbound packets that could not be transmitted because of errors.
             rcStatPosControlHCInOctets 1.3.6.1.4.1.2272.1.12.8.1.1.5 counter64 read-only
The total number of octets received of the interface, including framing characters.
             rcStatPosControlHCInUcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.6 counter64 read-only
The number of subnetwork-unicast packets received from a higher-layer protocol.
             rcStatPosControlHCInMulticastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.7 counter64 read-only
The number of multicast packets received from a higher-layer protocol.
             rcStatPosControlHCInBroadcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.8 counter64 read-only
The number of broadcast packets received from a higher-layer protocol.
             rcStatPosControlHCInDiscards 1.3.6.1.4.1.2272.1.12.8.1.1.9 counter64 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
             rcStatPosControlHCOutOctets 1.3.6.1.4.1.2272.1.12.8.1.1.10 counter64 read-only
The total number of octets trasmitted out of the interface, including framing characters.
             rcStatPosControlHCOutUcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.11 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
             rcStatPosControlHCOutMulticastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.12 counter64 read-only
The number of multicast packets delivered to a higher-layer protocol.
             rcStatPosControlHCOutBroadcastPkts 1.3.6.1.4.1.2272.1.12.8.1.1.13 counter64 read-only
The number of broadcast packets delivered to a higher-layer protocol.
             rcStatPosControlHCOutDiscards 1.3.6.1.4.1.2272.1.12.8.1.1.14 counter64 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.
 rcPosMib 1.3.6.1.4.1.2272.1.26.0
Enterprise MIB for the Accelar product family.
 rcPosPppIpxTable 1.3.6.1.4.1.2272.1.26.1 no-access
     rcPosPppIpxEntry 1.3.6.1.4.1.2272.1.26.1.1 no-access
         rcPosPppIpxIfIndex 1.3.6.1.4.1.2272.1.26.1.1.1 interfaceindex read-only
port number.
         rcPosPppIpxIpxcpAdminStatus 1.3.6.1.4.1.2272.1.26.1.1.2 integer read-write
Enumeration: 'close': 2, 'open': 1.
         rcPosPppIpxOperStatus 1.3.6.1.4.1.2272.1.26.1.1.3 integer read-only
Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
         rcPosPppIpxNetAddr 1.3.6.1.4.1.2272.1.26.1.1.4 octet string read-write
IPX Network address.
         rcPosPppIpxRoutingProtocol 1.3.6.1.4.1.2272.1.26.1.1.5 integer read-write
Enumeration: 'none': 0, 'rip': 2.
 rcPosSonetTable 1.3.6.1.4.1.2272.1.26.2 no-access
     rcPosSonetEntry 1.3.6.1.4.1.2272.1.26.2.1 no-access
         rcPosSonetIndex 1.3.6.1.4.1.2272.1.26.2.1.1 interfaceindex read-only
pos ifIndex.
         rcPosSonetFraming 1.3.6.1.4.1.2272.1.26.2.1.2 integer read-write
Enumeration: 'sonet': 1, 'sdh': 2.
         rcPosSonetSectionTrace 1.3.6.1.4.1.2272.1.26.2.1.3 integer read-write
config. J0 byte
         rcPosSonetSectionGrowth 1.3.6.1.4.1.2272.1.26.2.1.4 integer read-write
config. Z0 byte
         rcPosSonetSyncronization 1.3.6.1.4.1.2272.1.26.2.1.5 integer read-write
config. S1 byte
         rcPosSonetStsPathTrace 1.3.6.1.4.1.2272.1.26.2.1.6 octet string read-write
config. 64/16 byte.
         rcPosSonetPathSignalLabel 1.3.6.1.4.1.2272.1.26.2.1.7 integer read-write
config. C2 byte
         rcPosSonetClockSource 1.3.6.1.4.1.2272.1.26.2.1.8 integer read-write
Enumeration: 'line': 1, 'internal': 2.
         rcPosSonetScramble 1.3.6.1.4.1.2272.1.26.2.1.9 enablevalue read-write
         rcPosSonetOperStatusFraming 1.3.6.1.4.1.2272.1.26.2.1.10 integer32 read-only
         rcPosSonetOperStatusClockSource 1.3.6.1.4.1.2272.1.26.2.1.11 integer32 read-only
         rcPosSonetOperStatusScramble 1.3.6.1.4.1.2272.1.26.2.1.12 enablevalue read-only
         rcPosSonetOperStatusSectionTrace 1.3.6.1.4.1.2272.1.26.2.1.13 integer32 read-only
         rcPosSonetOperStatusPathSignalLabel 1.3.6.1.4.1.2272.1.26.2.1.14 integer32 read-only
 rcPosLineStatusTable 1.3.6.1.4.1.2272.1.26.3 no-access
Pos Line Status Table
     rcPosLineStatusEntry 1.3.6.1.4.1.2272.1.26.3.1 no-access
Entry containing infomation of Pos Line Status.
         rcPosLineStatusIndex 1.3.6.1.4.1.2272.1.26.3.1.1 interfaceindex read-only
pos ifIndex, same as rcPosPppIpxIfIndex.
         rcPosLineStatusLocalMACAddress 1.3.6.1.4.1.2272.1.26.3.1.2 macaddress read-only
current local MAC address
         rcPosLineStatusRemoteMACAddress 1.3.6.1.4.1.2272.1.26.3.1.3 macaddress read-only
current remote MAC address
         rcPosLineStatusLocalIpAddr 1.3.6.1.4.1.2272.1.26.3.1.4 ipaddress read-only
current local ip addr
         rcPosLineStatusRemoteIpAddr 1.3.6.1.4.1.2272.1.26.3.1.5 ipaddress read-only
current remote ip addr
         rcPosLineStatusOutQuality 1.3.6.1.4.1.2272.1.26.3.1.6 integer32 read-only
current output quality.
         rcPosLineStatusLocalPeriod 1.3.6.1.4.1.2272.1.26.3.1.7 integer32 read-only
         rcPosLineStatusDeviceType 1.3.6.1.4.1.2272.1.26.3.1.8 integer32 read-only
         rcPosLineStatusDeviceRev 1.3.6.1.4.1.2272.1.26.3.1.9 integer32 read-only
         rcPosLineStatusIpxRoutingProtocol 1.3.6.1.4.1.2272.1.26.3.1.10 integer32 read-only
 rcPosLineConfigTable 1.3.6.1.4.1.2272.1.26.4 no-access
Pos Line Config Table
     rcPosLineConfigEntry 1.3.6.1.4.1.2272.1.26.4.1 no-access
Entry containing infomation of Pos Line Config.
         rcPosLineConfigIndex 1.3.6.1.4.1.2272.1.26.4.1.1 interfaceindex read-only
pos ifIndex, same as rcPosPppIpxIfIndex.
         rcPosLineConfigLocalMACAddress 1.3.6.1.4.1.2272.1.26.4.1.2 macaddress read-write
current local MAC address
         rcPosLineConfigRemoteMACAddress 1.3.6.1.4.1.2272.1.26.4.1.3 macaddress read-write
current remote MAC address
         rcPosLineConfigLocalIpAddr 1.3.6.1.4.1.2272.1.26.4.1.4 ipaddress read-write
current local ip addr
         rcPosLineConfigRemoteIpAddr 1.3.6.1.4.1.2272.1.26.4.1.5 ipaddress read-write
current remote ip addr
         rcPosLineConfigRemoteReportPeriod 1.3.6.1.4.1.2272.1.26.4.1.6 integer read-write
config. remote report period.
         rcPosLineConfigLqrThreshold 1.3.6.1.4.1.2272.1.26.4.1.7 integer read-write
config. input quality.
         rcPosLineConfigOutQuality 1.3.6.1.4.1.2272.1.26.4.1.8 integer32 read-write
config. output quality.
         rcPosLineConfigPppStp 1.3.6.1.4.1.2272.1.26.4.1.9 enablevalue read-write
STP PPP encoding enable T/F
         rcPosLineConfigLoopBack 1.3.6.1.4.1.2272.1.26.4.1.10 truthvalue read-write
perform loop-back.
         rcPosLineConfigIpxVlanMacAddress 1.3.6.1.4.1.2272.1.26.4.1.11 macaddress read-write
         rcPosLineConfigIpxRemoteMacAddress 1.3.6.1.4.1.2272.1.26.4.1.12 macaddress read-write
 rcPosSonetTrap 1.3.6.1.4.1.2272.1.26.5
     rcPosSonetTrapType 1.3.6.1.4.1.2272.1.26.5.1 integer read-only
Used to indicate a particular type of Sonet trap. Enumeration: 'sectionAlarm': 1, 'lineAlarm': 2, 'pathAlarm': 3.
     rcPosSonetTrapIndication 1.3.6.1.4.1.2272.1.26.5.2 integer read-only
Used to indicate an indication for a Sonet trap. Enumeration: 'pathLossOfPointer': 6, 'pathSignalLabelMismatch': 10, 'pathAlarmIndication': 7, 'noDefect': 1, 'sectionLossOfFrame': 3, 'pathTraceMismatch': 11, 'sectionLossOfSignal': 2, 'lineRemoteDefectIndication': 5, 'pathRemoteDefectIndication': 8, 'pathUnequipped': 9, 'lineAlarmIndication': 4.
 rcPosSioCardConfigTable 1.3.6.1.4.1.2272.1.26.6 no-access
Pos Sio Card Config Table
     rcPosSioCardConfigEntry 1.3.6.1.4.1.2272.1.26.6.1 no-access
Entry containing infomation of Pos Sio Card Config.
         rcPosSioCardConfigSlotIndex 1.3.6.1.4.1.2272.1.26.6.1.1 integer32 read-only
slot Index.
         rcPosSioCardConfigAction 1.3.6.1.4.1.2272.1.26.6.1.2 integer read-write
Enumeration: 'reset': 1, 'other': 0.
         rcPosSioCardConfigTraceMode 1.3.6.1.4.1.2272.1.26.6.1.3 integer read-write
Enumeration: 'traceOn': 1, 'other': 0.
         rcPosSioCardConfigImageFileName 1.3.6.1.4.1.2272.1.26.6.1.4 displaystring read-only
POS Image file name.
 rcPosOperStatusTable 1.3.6.1.4.1.2272.1.26.7 no-access
     rcPosOperStatusEntry 1.3.6.1.4.1.2272.1.26.7.1 no-access
         rcPosOperStatusIndex 1.3.6.1.4.1.2272.1.26.7.1.1 interfaceindex read-only
pos ifIndex.
         rcPosOperStatusLqrStatus 1.3.6.1.4.1.2272.1.26.7.1.2 integer32 read-only
Operational status of pppLqrConfigStatus.
         rcPosOperStatusLineLqrThreshold 1.3.6.1.4.1.2272.1.26.7.1.3 integer32 read-only
.
         rcPosOperStatusLinkMagicNumber 1.3.6.1.4.1.2272.1.26.7.1.4 integer32 read-only
.
         rcPosOperStatusLinePppStp 1.3.6.1.4.1.2272.1.26.7.1.5 enablevalue read-only