RC-IP-BGP-MIB: View SNMP OID List / Download MIB

Enterprise MIB for the Accelar product family.

Local Autonomous system number

Disable or Enable group administrative

The default-metric is used in conjunction with the redistribute router configuration command to cause the bgp routing protocol to use this metric as MED

Default local preference attribute value to be used

allows the redistribution of network 0.0.0.0 into BGP

Enable to consider a missing MED attribute in a path as having a value of infinity, making the path without a MED value the least desirable path. To return the router to the default (assign a value of 0 to the missing MED), set the value to disable.

To enable MED comparison among paths learned from confederation peers. Disable to prevent considering the MED attribute in comparing paths

Configures BGP to overlook an illegal router ID. Enables or disable accepting a connection from a peer that sends its open message with a router ID of 0.

Enable to allow the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in different autonomous systems.

Enable the feature that automatically restarts the connection to a BGP peer when the connection goes down.

Enable BGP to summarize networks based on class limlts (Class A,B,C networks).

Enables and disables the router from accepting routes from BGP peers without waiting for an update from the IBGP.

Sets the number of maximum number of equal-cost routes that can be stored in the routing table.

Configure BGP to report imported routes to an interior BGP peer.

Enabled or Disabled

value is one of multiple (logiacally by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128), update(256), all(511) all(511): Enables all debugging messages. none(0): Disables all debugging messages. error(1): Enables disolay of debug error messages. packet(2): Enables display of debug packet messages. event(4): Enables display of debug event messages. trace(8): Enables display debug trace messages. warning(16): Enables display debug warning messages. state(32): Enables display of debug state transition messages. init(64): Enables display of debug initialization messages. filter(128): Enables display of debug messages related to filtering. update(256): Enables display of debug messages related to sending and receiving updates.

Enable the flag to avoid flap penalty and trigger the peer start event quickly

Enable to allow the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in same autonomous system.

Route Refresh for Bgp.

Route Policy Name that will be applied to all routes which enter the VRF table.

Route policy name that will be applied to all routes which are sent out of this VRF instance.

allows the redistribution of default ipv6 network into BGP

Size of Aggregate Table

To specify the list of aggregate prefixes to be created by the BGP routing process and the options to be used while aggregating.

An entry of rcIpBgp Aggregate Address In Table.

Prefix to create an aggregate address in BGP routing table.

Mask for the aggregrate

Enable Generates autonomous system set path information.

Filters all more specific routes from updates.

Name of route policy used to select the routes to be suppressed.

Name of route policy used to select the routes to create AS-SET origin communities.

Name of route policy used to set the attribute of the aggregate route.

Row status for create/delete.

Confederation AS identifier

The string represents ConfederatoinPeers as . Maximum size 255,if any, will not be recorded by this object. The length is a 1-octet field containing the numbner of peers in the value field. The value field contains one or more peers (AS numbers which are part of the confederation). Each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;

Enable Route Reflection on this router

Cluster ID of this router acting as a route reflector

When this router is configured as a route reflector, and the clients are fully meshed, a Disable value disables reflection of routes from one client to another.

Displays the current route reflection operational state

Network Prefix table size

The networks in this table are either static/directly connected or learned routes. Bgp advertises these network provided they are reachable and are in the IP routing table

An entry In NetworkTable.

Network prefix that BGP will advertise.

Network mask

Row status for create/delete.

Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp peers.

BGP peer table size

IP BGP Peer table

An entry of Ip rcIpBgp Peer Table.

Enable/Disable: controls whether the peer connection is enabled or disabled Enumeration: 'disabled': 2, 'enabled': 1.

The Ip address of this peer

Remote Autonomous system number of this peer

Peer group name to which this peer belongs (optional)

To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route

To accept and attempt BGP connections to external peers residing on networks that are not directly connected

To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 5 to 120.

To enable MD5 authentication on a TCP connection between two BGP peers Case-sensitive password of up to 80 character

To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535.

Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit

Set NextHop Attribute to local router address before sending updates to remote peer

Route Policy Name that will be applied to all networks learned from this peer

Route policy name that will be applied to all outgoing updates

Indicates whether this peer is a route reflector client.

If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. Enabling soft reconfig-in causes all bgp routes to be stored in local memory (even non-best routes)

If rcIpBgpPeerSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection by setting rcIpBgpPeerSoftReconfiguration to in(1). Setting the value to out (2) forces the neighbor to send out all the updates to the remote neighbor without resetting the connection. Enumeration: 'none': 3, 'out': 2, 'in': 1.

Enable and disable private AS number from being stripped when sending an update

Used to create/delete entries in the Table.

Enable and Disable MD5 authentication

value is one of multiple (logiacally by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128), update(256), all(511) all(511): Enables all debugging messages. none(0): Disables all debugging messages. error(1): Enables disolay of debug error messages. packet(2): Enables display of debug packet messages. event(4): Enables display of debug event messages. trace(8): Enables display debug trace messages. warning(16): Enables display debug warning messages. state(32): Enables display of debug state transtion messages. init(64): Enables display of debug initialization messages. filter(128): Enables display of debug messages related to filtering. update(256): Enables display of debug messages related to sending and receiving updates.

----------------------------

The IP address to be used for Circuitless IP.

Specifies whether the BGP to MPLS cut through being used is an LSP or an LSP group. Enumeration: 'lspgroup': 2, 'lsp': 1.

The ID of LSP or LSP group being used for BGP to MPLS cut through.

The BGP peer connection state. Enumeration: 'established': 6, 'openconfirm': 5, 'opensent': 4, 'idle': 1, 'connect': 2, 'active': 3.

The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.

The vpnv4 routes specified.

The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer.

The site-of-origin ip address.

The asnum for the site-of-origin for bgp peer.

The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer.

The soo type can be asnum or ipaddress. Enumeration: 'none': 0, 'ipaddr': 2, 'asnum': 1.

Route refresh for bgp peer.

The AS Override value can be enabled or disabled for bgp peer.

The number of as-in allowed for bgp peer

BFD Admin state flag

BGP Peer Group table size

IP rcIpBgp Peer Group table. This table contains rows which are template configuration parameters which are shared by a group of peers. Peers belonging to the same group will refer to the same row in this table using a peer group name

An entry of Ip rcIpBgp Peer Group Table.

Allows disabling a group of peers

Index in to the Peer Group Table

Name of the BGP peer group to which this neighbor belong

Remote Autonomous system number of this peer group (optional)

Enabling this attribute allows a BGP speaker (the local router) to send the default route 0.0.0.0 to the group of neighbors for use as a default route. Enumeration: 'enable': 1, 'disable': 2.

To accept and attempt BGP connections to external peers residing on networks that are not directly connected Enumeration: 'enable': 1, 'disable': 2.

To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 1 to 120.

To set the time interval in seconds between the sending of BGP keep alive messages to remote peers.

To configure the hold time for the group of peers in seconds. Usually set to three times the value of the Keepalive time

To assign an absolute weight to a BGP network. Absolute weight, or importance. It can be an integer from 0 to 65535.

Sets a limit on the number of routes that will be accepted from this group of neighbors. A value of zero indicates no limit

Set NextHop Attribute to local router address before sending updates to remote peers

Route Policy Name that will be applied to all networks learned from this group of peers

Route policy name that will be applied to all outgoing updates to this group of peers

Indicates whether this group of peers is a route reflector client.

If Peer soft reconfiguration is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. Enabling soft reconfig-in causes all bgp routes to be stored in local memory (even non-best routes)

If Peer soft reconfiguration-in is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection by setting rcIpBgpPeerGroupSoftReconfiguration to in(1). Setting the value to out (2) forces the neighbor to send out all the updates to the remote neighbor without resetting the connection. Enumeration: 'out': 2, 'in': 1.

To enable MD5 authentication on TCP connections between this local speaker and this group of BGP peers. Case-sensitive password of up to 80 character

Enable and disable private AS number from being stripped when sending an update

row status

Enable and Disable MD5 authentication

Enables or disables sending the update message community attribute to the specified peer.

The IP address to used for circuitless IP for this peer group.

The vpnv4 routes specified.

The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group.

The site-of-origin ipaddress.

The asnum for site-of-origin for bgp peer group.

The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer group.

The soo type can be asnum or ipaddress. Enumeration: 'none': 0, 'ipaddr': 2, 'asnum': 1.

Route refresh for bgp peer group.

The AS Override value can be enabled or disabled for bgp peer group.

The number of as-in allowed for bgp peer group.

Enabling this attribute allows a BGP speaker (the local router) to send the default route to the group of neighbors for use as a default route.

The Inet address type used for circuitless IP for this peer group.

The Inet address to used for circuitless IP for this peer group.

The ipv6 capability can be enabled or disabled on the bgp neighbor peer group.

Ipv6 Route Policy Name that will be applied to all networks learned from this group of peers

Ipv6 Route policy name that will be applied to all outgoing updates to this group of peers

table size

This table contains info about paths to destination networks received from all BGP-4 peers

Information about a path to a networks

The IP address of the peer where the path info was learned

Length in bits of the IP address prefix in the network Layer Reachablity Information field.

An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen are zeroed.

Penalty value based on number of route flaps

Number of times a route flapped since the last time the penalty was reset to zero

Shows whether this route is currently suppressed from being announced Enumeration: 'suppressed': 2, 'announced': 1.

Re use time

Re use time Remain is the number of seconds before the route will be reused

table size

This table contains info about paths to destination networks received from all BGP-4 peers

--------------

The IP address of the peer where the path info was learned

Length in bits of the IP address prefix in the network Layer Reachablity Information field.

An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen are zeroed.

The string represents community path attributes as The length is a 1-octet field containing the numbner of community numbers in the value field.The value field contains one or more Community numbers,each community is represented in the octet string as 4 octets.The community numbers in the string beyond maximum size 255,if any, will not be recorded by this object.

The IP address of the route who originates the routes

The string represents Cluster Id path attributes as The length is a 1-octet field containing the number of Cluster Id numbers in the value field.The value field contains one or more Cluster Id numbers,each Cluster Id is represented in the octet string as 4 octets,each four octets is the IpAddress of the router acting as a route reflector.The Cluster Id numbers in the string beyond maximum size 255,if any, will not be recorded by this object.

Number of times BGP connection started

Number of times BGP connection stopped

Number of times BGP opens TCP

Number of times BGP closes TCP

Number of times TCP attempts failed

Number of times TCP crashes due to fatal error

Number of times TCP retry timer expired

Number of times hold timer expired

Number of times keepalive timer expired

Number of OPENs BGP receives

Number of KEEPALIVEs BGP recieves

Number of UPDATEs BGP recieves

Number NOTIFICATIONs BGP recieves

Number of OPENs BGP transmitted

Number of KEEPALIVEs BGP transmitted

Number of UPDATEs BGP transmits

Number of NOTIFICATIONs BGP transmits

Number of invalid events FSM received

Number of times FDB sync failed

Trace event

Total Header errors received

Total Open errors received

Total Update errors received

Total Holdtimer errors received

Total FSM errors received

Total Cease errors received

Header Not Synchronized errors received

Header Invalid msg len errors received

Header Invalid msg type errors received

Open errors received: Bad Version

Open errors received: Bad AS Number

Open errors received: Bad BGP Rtr ID

Open errors received: Unsupported Option

Open errors received: Auth Failures

Open errors received: Bad Hold Value

Update errors received:Malformed Attr List

Update errors received: Welknown Attr Unrecog

Update errors received: Welknown Attr Missing

Update errors received: Attr Flag Error

Update errors received: Attr Len Error

Update errors received: Bad ORIGIN Attr

Update errors received: AS Routing Loop

Update errors received: Bad NEXT-HOP Attr

Update errors received: Optional Attr Error

Update errors received: Bad Network Field

Update errors received: Malformed AS Path

Total Header errors transmitted

Total Open errors transmitted

Total Update errors transmitted

Total Holdtimer errors transmitted

Total FSM errors transmitted

Total Cease errors transmitted

Header Not Synchronized errors transmitted

Header Invalid msg len errors transmitted

Header Invalid msg type errors transmitted

Open errors transmitted: Bad Version

Open errors transmitted: Bad AS Number

Open errors transmitted: Bad BGP Rtr ID

Open errors transmitted: Unsupported Option

Open errors transmitted: Auth Failures

Open errors transmitted: Bad Hold Value

Update errors transmitted:Malformed Attr List

Update errors transmitted: Welknown Attr Unrecog

Update errors transmitted: Welknown Attr Missing

Update errors transmitted: Attr Flag Error

Update errors transmitted: Attr Len Error

Update errors transmitted: Bad ORIGIN Attr

Update errors transmitted: AS Routing Loop

Update errors transmitted: Bad NEXT-HOP Attr

Update errors transmitted: Optional Attr Error

Update errors transmitted: Bad Network Field

Update errors transmitted: Malformed AS Path

reset Bgp global stats

A table used to store Bgp Peer statistics.

Bgp Peer statistics

----------------------------

Number of times peer BGP connection started

Number of times peer BGP connection stopped

Number of times peer opens TCP

Number of times peer closes TCP

Number of times peer TCP attempts failed

Number of times peer TCP crashes due to fatal error

Number of times peer TCP retry timer expired

Number of times peer hold timer expired

Number of times peer keepalive timer expired

Total messages send by the peer

Opens sent by the peer

Keepalives sent by the peer

Updates sent by the peer

Notifications sent by the peer

Total messages received by the peer

Incomplete message received by the peer

Opens received by the peer

Keepalives received by the peer

Updates received by the peer

Notifications received by the peer

Number of invalid events received by the peer

Number of times FDB sync failed of the peer

Number of messages recieved by the peer that is too sho rt

Number of messages without marker recieved by the peer

Number of messages the peer has dropped

Number of messages with invalid message type

Peer trace event

Number of NLRI sent by peer

Number of routes added into loc_rib by this peer

Number of routes replaced by the routes received by the peer

Number of NLRI received by the peer

Number of valid UPDATEs received by the peer

Total errors peer received: Header

Total errors peer received: Open

Total errors peer received: Update

Total errors peer received: Hold

Total errors peer received: Fsm

Total errors peer received: Cease

Header errors peer received: Not Synchronized

Header errors peer received: Invalid message length

Header errors peer received: Invalid message type

Open errors peer received: Bad Version

Open errors peer received: Bad AS number

Open errors peer received: Bad BGP ID

Open errors peer received: Unsupported Options

Open errors peer received: Authorization failures

Open errors peer received: Bad Hold value

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Total errors peer received: Header

Total errors peer received: Open

Total errors peer received: Update

Total errors peer received: Hold

Total errors peer received: Fsm

Total errors peer received: Cease

Header errors peer received: Not Synchronized

Header errors peer received: Invalid message length

Header errors peer received: Invalid message type

Open errors peer received: Bad Version

Open errors peer received: Bad AS number

Open errors peer received: Bad BGP ID

Open errors peer received: Unsupported Options

Open errors peer received: Authorization failures

Open errors peer received: Bad Hold value

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

Update errors peer received: Malformed Attr List

reset peer stats