RAISECOM-NAT-MIB: View SNMP OID List / Download MIB
VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.
| Home | MIB: RAISECOM-NAT-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| raisecomNatMIB | 1.3.6.1.4.1.8886.15.1.1 |
The MIB module to describe NAT objects. |
||
| natDesc | 1.3.6.1.4.1.8886.15.1.1.1 | |||
| natNumber | 1.3.6.1.4.1.8886.15.1.1.1.1 | integer | read-only |
The number of NAT instances (regardless of their current state) present on this system. |
| natSessionNumber | 1.3.6.1.4.1.8886.15.1.1.1.2 | integer | read-only |
The number of NAT sessions present on this system. |
| natSwVersion | 1.3.6.1.4.1.8886.15.1.1.1.3 | displaystring | read-only |
A textual string describing the NAT software version in use. |
| natPrRealmType | 1.3.6.1.4.1.8886.15.1.1.1.4 | displaystring | read-only |
A textual string containing information about the private realm this nat is bridging. Common value will be IPv4. |
| natExtRealmType | 1.3.6.1.4.1.8886.15.1.1.1.5 | displaystring | read-only |
A textual string containing information about the external realm this nat is bridging. Common value will be IPv4. |
| natTable | 1.3.6.1.4.1.8886.15.1.1.1.6 | no-access |
A list of NAT descriptor entries. The number of entries is given by the value of natNumber. |
|
| 1.3.6.1.4.1.8886.15.1.1.1.6.1 | no-access |
A NAT entry contains all the relevant objects describing a particular NAT instance. |
||
| natIndex | 1.3.6.1.4.1.8886.15.1.1.1.6.1.1 | integer | read-only |
A unique value for each NAT instance. Its value ranges between 1 and the value of natNumber. The value for each NAT instance must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization. |
| natTypeMask | 1.3.6.1.4.1.8886.15.1.1.1.6.1.2 | integer | read-only |
A Bit Mask documenting the NAT types as defined in RFC 2663 this NAT instance supports. Its value may be any combination of the options below: Basic-NAT(Bit 0) NAPT(Bit 1) Bi-directional-NAT(Bit 2) Twice-NAT(Bit 3) RSA-IP-Server(Bit 4) RSAP-IP-Server(Bit 5) Bit 0, if set, indicates that Basic-NAT is supported. Bit 1, if set, indicates that NAPT is supported. Bit 2, if set, indicates that Bi-directional-NAT is supported. Bit 3, if set, indicates that Twice-NAT is supported. Bit 4, if set, indicates that RSA-IP-Server is supported. Bit 5, if set, indicates that RSAP-IP-Server is supported. |
| natType | 1.3.6.1.4.1.8886.15.1.1.1.6.1.3 | integer | read-only |
A Bit Mask documenting the NAT device's actual configuration according to natTypeMask above. Its value may be one and only one of the options below: Basic-NAT(Bit 0) NAPT(Bit 1) Bi-directional-NAT(Bit 2) Twice-NAT(Bit 3) RSA-IP-Server(Bit 4) RSAP-IP-Server(Bit 5) Bit 0, if set, indicates that Basic-NAT is configured. Bit 1, if set, indicates that NAPT is configured. Bit 2, if set, indicates that Bi-directional-NAT is configured. Bit 3, if set, indicates that Twice-NAT is configured. Bit 4, if set, indicates that RSA-IP-Server is configured. Bit 5, if set, indicates that RSAP-IP-Server is configured. |
| natTotalBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.4 | integer | read-only |
The number of NAT bind entries present on this system. |
| natMaxStaticBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.5 | integer | read-only |
The maximum number of static bind entries this NAT device supports. |
| natCurrStaticBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.6 | integer | read-only |
The current number of static bind entries on this NAT device. |
| natCurrDynamicBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.7 | integer | read-only |
The current number of dynamic bind entries on this NAT device. |
| natMaxStaticIpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.8 | integer | read-only |
The maximum number of static IP bind entries this NAT device supports. |
| natCurrStaticIpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.9 | integer | read-only |
The current number of static IP bind entries this NAT device supports. |
| natCurrDynamicIpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.10 | integer | read-only |
The current number of dynamic IP bind entries on this NAT device. |
| natMaxStaticTcpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.11 | integer | read-only |
The maximum number of static TCP bind entries this NAT device supports. This only applies if the NAT device is configured in NAPT mode. |
| natCurrStaticTcpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.12 | integer | read-only |
The current number of static TCP bind entries this NAT device supports. This only applies if the NAT device is configured in NAPT mode. |
| natCurrDynamicTcpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.13 | integer | read-only |
The current number of dynamic TCP bind entries on this NAT device. |
| natMaxStaticUdpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.14 | integer | read-only |
The maximum number of static UDP bind entries this NAT device supports. This only applies if the NAT device is configured in NAPT mode. |
| natCurrStaticUdpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.15 | integer | read-only |
The current number of static UDP bind entries this NAT device supports. This only applies if the NAT device is configured in NAPT mode. |
| natCurrDynamicUdpBinds | 1.3.6.1.4.1.8886.15.1.1.1.6.1.16 | integer | read-only |
The current number of dynamic UDP bind entries on this NAT device. |
| natSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.17 | integer | read-write |
All sessions are associated with a session-idle timeout. When this timeout expires, if the session is idle, the corresponding entry in the session table is deleted. This parameter defines the value in seconds for the IP session-idle timeout loaded when the session itself is detected on the NAT device. Changing this parameter only affects IP sessions detected at a later time. This parameter is only significant when the device operates in Basic-NAT mode. |
| natUdpSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.18 | integer | read-only |
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted. This parameter defines the value in seconds for the UDP session-idle timeout loaded when the session itself is detected on the NAT device. Changing this parameter only affects UDP sessions detected at a later time. This parameter is only significant when the device operates in NAPT mode. |
| natIcmpSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.19 | integer | read-only |
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted. This parameter defines the value in seconds for the ICMP session-idle timeout loaded when the session itself is detected on the NAT device. Changing this parameter only affects ICMP sessions detected at a later time. This parameter is only significant when the device operates in NAPT mode. |
| natTcpUpSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.20 | integer | read-only |
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted. TCP sessions define different timeouts for different states (with reference to the TCP state machine). This parameter defines the value in seconds for the session-idle timeout loaded when a TCP session in established state is detected on the NAT device. Changing this parameter only affects sessions detected at a later time. |
| natTcpDiscSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.21 | integer | read-only |
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted. TCP sessions define different timeouts for different states (with reference to the TCP state machine). This parameter defines the value in seconds for the session-idle timeout loaded when the NAT device detects a TCP session is being disconnected. |
| natTcpClosingSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.22 | integer | read-only |
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted. TCP sessions define different timeouts for different states (with reference to the TCP state machine). This parameter defines the value in seconds for the session-idle timeout loaded when the NAT device detects a TCP session is being closed. |
| natTcpSyncSessionMaxIdleTime | 1.3.6.1.4.1.8886.15.1.1.1.6.1.23 | integer | read-only |
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted. TCP sessions define different timeouts for different states (with reference to the TCP state machine). This parameter defines the value in seconds for the session-idle timeout loaded when the NAT device detects a TCP session in the synch state. |
| natLogMask | 1.3.6.1.4.1.8886.15.1.1.1.6.1.24 | integer | read-write |
A Bit Mask documenting the NAT instance's logging option behaviour. Bit 0, if set, indicates that console output is enabled. Bit 1, if set, indicates that the system will write initialization sequence output to the console. Bit 2, if set, indicates that the system will write data output to the console. Bit 3, if set, indicates that the system will write trace output to the console. Bit 4, if set, indicates that the system will write information about error events to the console. |
| natEnable | 1.3.6.1.4.1.8886.15.1.1.1.6.1.25 | boolean | read-write |
A boolean flag to enable or disable the NAT device. The device needs to be re-initialized before a change to this flag may take effect. |
| natDefXEnable | 1.3.6.1.4.1.8886.15.1.1.1.6.1.26 | boolean | read-write |
Normally the NAT device translates incoming packets' IP addresses and transport ports according to its translation tables. However, the user may want to change this default behaviour, for instance to allow for RSIP hosts within the local network to operate properly. In such cases, this flag should be set to false. |
| natGlobalAddrFilter | 1.3.6.1.4.1.8886.15.1.1.1.6.1.27 | boolean | read-write |
This boolean flag is only meaningful if natDefXEnable is set to false. If so, and if natGlobalAddrFilter is set to false, then the NAT device will route packets received on the global port to the local network, without translating them. This enables RSIP hosts within the local network. Conversely, if this flag is set to true, then packets received on the global port will be filtered according to their destination IP address. |
| natStaticBindEnable | 1.3.6.1.4.1.8886.15.1.1.1.6.1.28 | boolean | read-only |
A boolean flag to enable or disable static bind entries on the NAT device. |
| natAdminCmd | 1.3.6.1.4.1.8886.15.1.1.1.6.1.29 | integer | read-write |
NAT Command. Enumeration: 'ready': 1, 'clearrules': 2. |
| raisecomIpNatTable | 1.3.6.1.4.1.8886.15.1.1.1.7 | no-access |
This table is used to configure nat global ip address. |
|
| 1.3.6.1.4.1.8886.15.1.1.1.7.1 | no-access |
Define the global IP address information. |
||
| raisecomIpNatAddress | 1.3.6.1.4.1.8886.15.1.1.1.7.1.1 | ipaddress | read-write |
The IP address to which this entry's addressing information pertains. |
| raisecomIpNatAddressRowStatus | 1.3.6.1.4.1.8886.15.1.1.1.7.1.2 | rowstatus | read-only |
The row status is used to manage creation and deletion of rows in this table. |
| natBind | 1.3.6.1.4.1.8886.15.1.1.2 | |||
| natBindTable | 1.3.6.1.4.1.8886.15.1.1.2.8 | no-access |
A table containing NAT bind-specific information. |
|
| 1.3.6.1.4.1.8886.15.1.1.2.8.1 | no-access |
Information about a particular current NAT bind. |
||
| natBindStatic | 1.3.6.1.4.1.8886.15.1.1.2.8.1.1 | boolean | read-only |
This flag indicates whether this bind is static or dynamic. A value of true(1) indicates this bind is static. A value of false(2) indicates this bind is dynamic. |
| natBindType | 1.3.6.1.4.1.8886.15.1.1.2.8.1.2 | integer | read-only |
This field indicates whether this bind is between a pair of IP-addresses, or between a pair of (IP-address, Transport-Id) tuples. A value of 1 indicates this bind is based on a pair of IP-adresses. A value of 2 indicates this bind is based on the (IP-address, Transport-Id) tuple. Enumeration: 'transport': 2, 'address': 1. |
| natBindLocalAddress | 1.3.6.1.4.1.8886.15.1.1.2.8.1.3 | ipaddress | read-only |
The local IP address for this NAT bind, as seen in the first packet that triggered this bind instance. |
| natBindLocalPort | 1.3.6.1.4.1.8886.15.1.1.2.8.1.4 | integer | read-only |
The local port number for this NAT bind. For TCP binds, this is the local TCP port number, or 0 if no TCP port is associated with it yet. For UDP binds, this is the local UDP port number, or 0 if no UDP port is associated with it yet. For ICMP binds, this is the ICMP-identifier. For IP binds, the value of 65535 indicates that port is not applicable. |
| natBindRemAddress | 1.3.6.1.4.1.8886.15.1.1.2.8.1.5 | ipaddress | read-only |
The remote IP address for the transport bind, as seen in the first packet that triggered this bind instance. The value of 0.0.0.0 means there is no remote address associated with this bind yet. The value of 255.255.255.255 means the bind is for a broadcast message. For address binds, the remote address shown is actually the global address of the local host. NAT doesn't keep track of the remote address in address binds. |
| natBindRemPort | 1.3.6.1.4.1.8886.15.1.1.2.8.1.6 | integer | read-only |
The remote port number for this NAT bind. For TCP binds, this is the remote TCP port number, or zero, if no TCP port is associated with it yet. For UDP binds, this is the remote UDP port number, or zero, if no UDP port is associated with it yet. For ICMP binds, this is the ICMP-identifier. For IP (or address) binds, the port is shown as 65535 to indicate that port is not applicable. |
| natBindMaxLeaseTime | 1.3.6.1.4.1.8886.15.1.1.2.8.1.7 | integer | read-only |
The validity of a bind may be limited by the duration of lease time it is allowed. Unless the lease time is renewed, a bind will not be valid past the lease time. As a special case, a value of 0 may be assumed to indicate no lease time limit. A value of -1 means that it is not supported by this NAT instance. Typically, this attribute is of relevance only in conjunction with Realm-Specific-IP(RSIP) operation. |
| natBindLeaseLeft | 1.3.6.1.4.1.8886.15.1.1.2.8.1.8 | integer | read-only |
This parameter is of relevance only when Maximum lease time is a non-zero value. At any given instance of time, this parameter indicates the real-time left for a bind to remain valid. A value of -1 means that it is not supported by this NAT instance. Typically, this attribute is of relevance only in conjunction with Realm-Specific-IP(RSIP) operation. |
| natBindMaxIdle | 1.3.6.1.4.1.8886.15.1.1.2.8.1.9 | integer | read-only |
This parameter indicates the maximum amount of time this bind is allowed to remain valid, even if there is no activity. This parameter is ony valid for dynamic binds. External agents could also control this parameter. Static binds and lease time limited binds are not effected by this parameter. |
| natBindCurrIdle | 1.3.6.1.4.1.8886.15.1.1.2.8.1.10 | integer | read-only |
This parameter is of relevance only when natBindMaxIdle time is set to a non-zero value. At any given instance of time, this parameter indicates the time left for the entry to be removed from the list. |
| natBindDirection | 1.3.6.1.4.1.8886.15.1.1.2.8.1.11 | integer | read-only |
Direction of the bind may be uni-directional, or bi-directional. Enumeration: 'bidirectional': 2, 'unidirectional': 1. |
| natBindLocalIfNumber | 1.3.6.1.4.1.8886.15.1.1.2.8.1.12 | integer | read-only |
This parameter indicates the local network's physical interface number (ifIndex) for this bind. |
| natBindExtIfNumber | 1.3.6.1.4.1.8886.15.1.1.2.8.1.13 | integer | read-only |
This parameter indicates the external network's physical interface number (ifIndex) for this bind. |
| natBindLocalIfName | 1.3.6.1.4.1.8886.15.1.1.2.8.1.14 | displaystring | read-only |
This parameter indicates the local network's physical interface name for this bind, for instance 'fei'. |
| natBindExtIfName | 1.3.6.1.4.1.8886.15.1.1.2.8.1.15 | displaystring | read-only |
This parameter indicates the external network's physical interface name for this bind, for instance 'fei'. |
| natBindProto | 1.3.6.1.4.1.8886.15.1.1.2.8.1.16 | integer | read-only |
The IP protocol for this NAT bind entry. Enumeration: 'ip': 4, 'udp': 2, 'icmp': 3, 'tcp': 1. |
| natBindAction | 1.3.6.1.4.1.8886.15.1.1.2.8.1.17 | rowstatus | read-write |
A new static bind may be created or an existing one may be deleted by setting the multiple variable bindings of natBindProto and natBindAction. For example, to create a new static TCP bind of local host 192.168.10.10, local port 23, and global port 23, create a new oid natBindProto.192.168.10.23.0.0.0.0.23 and set it to 'tcp', and natBindAction.192.168.10.23.0.0.0.0.23 and set it to 'create and go'. Similarly, to delete the static bind, set natBindProto.23.0.0.0.0.23 to 'tcp' and natBindAction.192.168.10.23.0.0.0.0.23 to 'destroy'. To do this, your mib browser must be able to support multiple variable bindings access. Note that you can create and delete only TCP and UDP static entries which apply only in NAPT mode. |
| natBindContrAgent | 1.3.6.1.4.1.8886.15.1.1.2.8.1.18 | integer | read-only |
This indicates the last external Agent who has tried to control parameters for this bind. A value of 0 indicates that native NAT is the responsible agent. |
| natSession | 1.3.6.1.4.1.8886.15.1.1.3 | |||
| natSessionTable | 1.3.6.1.4.1.8886.15.1.1.3.1 | no-access |
A table containing NAT session-specific information. |
|
| 1.3.6.1.4.1.8886.15.1.1.3.1.1 | no-access |
Information about a particular current NAT session. |
||
| natSessionProto | 1.3.6.1.4.1.8886.15.1.1.3.1.1.1 | integer | read-only |
The IP protocol for this NAT session. Enumeration: 'ip': 4, 'udp': 2, 'icmp': 3, 'tcp': 1. |
| natSessionLocalAddress | 1.3.6.1.4.1.8886.15.1.1.3.1.1.2 | ipaddress | read-only |
The local IP address for this NAT session, as seen in the first packet that triggered this session instance. |
| natSessionLocalPort | 1.3.6.1.4.1.8886.15.1.1.3.1.1.3 | integer | read-only |
The local port number for this NAT sessions. The sessions may be of one of the type described in natSessionProto. For TCP sessions, this is the local TCP port number, or 0 if no TCP port is associated with it yet. For UDP sessions, this is the local UDP port number, or 0 if no UDP port is associated with it yet. For ICMP sessions, this is the ICMP-identifier. For IP sessions, the value of 65535 indicates that port is not applicable. |
| natSessionRemAddress | 1.3.6.1.4.1.8886.15.1.1.3.1.1.4 | ipaddress | read-only |
The remote IP address for this NAT session, as seen in the first packet that triggered this session instance. For address binds, the remote address shown is actually the global address of the local host. NAT doesn't keep track of the remote address in IP binds. |
| natSessionRemPort | 1.3.6.1.4.1.8886.15.1.1.3.1.1.5 | integer | read-only |
The remote port number for this NAT sessions. The sessions may be of one of the types described in natSessionType. For TCP sessions, this is the remote TCP port number, or 0 if no TCP port is associated with it yet. For UDP sessions, this is the remote UDP port number, or 0 if no UDP port is associated with it yet. For ICMP sessions, this is the ICMP-identifier. For IP sessions, the value 65535 indicates that port is not applicable. |
| natXSessionLocalAddress | 1.3.6.1.4.1.8886.15.1.1.3.1.1.6 | ipaddress | read-only |
The local IP address for this NAT session, after the NAT translation has occurred. |
| natXSessionLocalPort | 1.3.6.1.4.1.8886.15.1.1.3.1.1.7 | integer | read-only |
The local port number for this NAT session after the NAPT translation has occurred. The session may be of one of the types described in natSessionProto. For TCP sessions, this is the local TCP port number after the NAPT translation has occurred, or 0, if no TCP port is associated with this session yet. For UDP sessions, this is the local UDP port number, after the NAPT translation has occurred, or 0, if no UDP port is associated with this session yet. For ICMP sessions, this is the ICMP-identifier, after the NAPT translation has occurred. For IP sessions, the value of 65535 indicates that port is not applicable. |
| natXSessionRemAddress | 1.3.6.1.4.1.8886.15.1.1.3.1.1.8 | ipaddress | read-only |
The remote IP address for this NAT session, after the NAT translation has occurred. This is only relevant for NAT devices supporting twice-NAT. |
| natXSessionRemPort | 1.3.6.1.4.1.8886.15.1.1.3.1.1.9 | integer | read-only |
The remote port number for this NAT sessions after the NAPT translation has occurred. This is only relevant for NAT devices supporting twice-NAT. For TCP sessions, this is the remote TCP Port number after the NAPT translation has occurred. For UDP sessions, this is the remote UDP Port number, after the NAPT translation has occurred, or zero, if no UDP port is associated with this session. For ICMP sessions, this is the ICMP-identifier, after the NAPT translation has occurred. |
| natSessionEnd | 1.3.6.1.4.1.8886.15.1.1.3.1.1.10 | integer | read-only |
The heuristic means used to terminate this NAT session. A value of noheuristic in this field means the NAT device is not using any heuristic to terminate this session. A value of idletime in this field means the NAT device is using idle time information to terminate this session. A value of extagent in this field means an external agent is responsible for terminating this session. A value of other in this field simply means none of the above. Enumeration: 'extagent': 4, 'idletime': 3, 'other': 1, 'noheuristic': 2. |
| natSessionIdleTimeLeft | 1.3.6.1.4.1.8886.15.1.1.3.1.1.11 | integer | read-only |
This parameter represents a real-time measure of the time in seconds this session is allowed to remain valid, even when there is no activity. This parameter is of relevance only when session termination heuristic is set to session-idle-time. |
| natSessionPacketModifier | 1.3.6.1.4.1.8886.15.1.1.3.1.1.13 | integer | read-only |
Typically, NAT modifies IP header and sometimes the transport header. External agents may choose to assume responsibility for payload modification alone, or the entire packet modification. In the case an external agent assumes responsibility for the entire packet modification, NAT will simply redirect the original packet as is to external translation agent. Otherwise, NAT will perform its share of translation (i.e., IP and transport header translation) and direct the translated packet to external agent. Enumeration: 'noModifier': 1, 'ipModifier': 2. |
| natSessionDirection | 1.3.6.1.4.1.8886.15.1.1.3.1.1.14 | integer | read-only |
Direction of first packet of the session, with reference to the private realm. This information is not available for address binds. Enumeration: 'inbound': 2, 'outbound': 1. |
| natSessionContrAgent | 1.3.6.1.4.1.8886.15.1.1.3.1.1.15 | integer | read-only |
This indicates the last external Agent who has tried to control parameters for this session. A value of 0 indicates that native NAT is the responsible agent. |
| natInterface | 1.3.6.1.4.1.8886.15.1.1.4 | |||
| natInterfaceTable | 1.3.6.1.4.1.8886.15.1.1.4.1 | no-access |
A table containing NAT interface information. |
|
| 1.3.6.1.4.1.8886.15.1.1.4.1.1 | no-access |
Information about a particular current NAT interface. |
||
| natInterfaceName | 1.3.6.1.4.1.8886.15.1.1.4.1.1.1 | displaystring | no-access |
The name of a interface for NAT .The first ocet is the length of the string. |
| natInterfaceRealm | 1.3.6.1.4.1.8886.15.1.1.4.1.1.2 | integer | read-only |
This object identifies whether this interface is connected to the private or the public realm. Enumeration: 'public': 2, 'private': 1. |
| natInterfaceRawStatus | 1.3.6.1.4.1.8886.15.1.1.4.1.1.3 | rowstatus | read-only |
The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the natInterfaceRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding instance of natInterfaceServiceType has been set. None of the objects in this row may be modified while the value of this object is active(1). |