RADLAN-rndApplications: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-rndApplications
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC-v1, RADLAN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rndApplications 1.3.6.1.4.1.89.35
The private MIB module definition for RND applications MIB.
       rndMidLevelManagement 1.3.6.1.4.1.89.35.2
           rndAlarmOptions 1.3.6.1.4.1.89.35.2.2
               rndAlarmEnabling 1.3.6.1.4.1.89.35.2.2.1 integer read-write
Indicates whether alarms should be issued to the high-level NMS Enumeration: 'disabled': 2, 'enabled': 1.
               rndAlarmInterval 1.3.6.1.4.1.89.35.2.2.2 integer read-write
Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
           rndMonitoredElementsTable 1.3.6.1.4.1.89.35.2.3 no-access
The table of monitored elements of the network
               rndMonitoredElementEntry 1.3.6.1.4.1.89.35.2.3.1 no-access
The row definition for this table.
                   rndMonitoredElementAddress 1.3.6.1.4.1.89.35.2.3.1.1 ipaddress read-only
The IP address of the monitored element
                   rndMonitoredElementCommunity 1.3.6.1.4.1.89.35.2.3.1.2 displaystring read-write
The community of the monitored element
                   rndMonitoredElementLabel 1.3.6.1.4.1.89.35.2.3.1.3 displaystring read-write
The label assigned by the network manager to the monitored element
                   rndDefaultPollingInterval 1.3.6.1.4.1.89.35.2.3.1.4 integer read-write
The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
                   rndDefaultLogFile 1.3.6.1.4.1.89.35.2.3.1.5 displaystring read-write
The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
                   rndMonitoredElementStatus 1.3.6.1.4.1.89.35.2.3.1.6 rowstatus read-write
It is used to manage the monitored elements table and indicates the current monitoring status of an element.
           rndMonitoringTable 1.3.6.1.4.1.89.35.2.4 no-access
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
               rndMonitoringEntry 1.3.6.1.4.1.89.35.2.4.1 no-access
The row definition for this table.
                   rndMonitoredElement 1.3.6.1.4.1.89.35.2.4.1.1 displaystring read-only
A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
                   rndMonitoredObjectInstanceLabel 1.3.6.1.4.1.89.35.2.4.1.2 displaystring read-only
The label assigned by the network manager to the monitored object instance
                   rndMonitoredObjectName 1.3.6.1.4.1.89.35.2.4.1.3 displaystring read-write
The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
                   rndMonitoredObjectIdentifier 1.3.6.1.4.1.89.35.2.4.1.4 object identifier read-write
The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
                   rndMonitoredObjectInstance 1.3.6.1.4.1.89.35.2.4.1.5 object identifier read-write
The instance identifier (key) of the monitored object instance.
                   rndMonitoredObjectSyntax 1.3.6.1.4.1.89.35.2.4.1.6 integer read-write
The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value Enumeration: 'object-identifier': 4, 'integer': 1, 'octet-string': 2, 'ip-address': 3.
                   rndMonitoringInterval 1.3.6.1.4.1.89.35.2.4.1.7 integer read-write
The period of time between two consecutive retrievals of the monitored object instance's value.
                   rndAlarmMaxTreshold 1.3.6.1.4.1.89.35.2.4.1.8 integer read-write
The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
                   rndAlarmMinTreshold 1.3.6.1.4.1.89.35.2.4.1.9 integer read-write
If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
                   rndMonitoringLogfile 1.3.6.1.4.1.89.35.2.4.1.10 displaystring read-write
The entire path of the file in which the results of the monitoring of this object instance should be recorded.
                   rndMonitoringEntryStatus 1.3.6.1.4.1.89.35.2.4.1.11 rowstatus read-write
It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
                   rndMonitoredIntegerInstance 1.3.6.1.4.1.89.35.2.4.1.12 integer read-write
           rndMibFilesTable 1.3.6.1.4.1.89.35.2.5 no-access
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
               rndMibFileEntry 1.3.6.1.4.1.89.35.2.5.1 no-access
The row definition for this table.
                   rndMibFileIndex 1.3.6.1.4.1.89.35.2.5.1.1 integer read-only
The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
                   rndMibFilePath 1.3.6.1.4.1.89.35.2.5.1.2 displaystring read-write
The path of the MIB file in the MIB file server.
                   rndMibFileRefresh 1.3.6.1.4.1.89.35.2.5.1.3 integer read-write
Indicates if the file should be fetched after setting this entry from the MIB file server. Enumeration: 'yes': 2, 'no': 1.
                   rndMibFileEntryStatus 1.3.6.1.4.1.89.35.2.5.1.4 rowstatus read-write
It is used to manage the MIB files table.
           rndHardwareConfiguration 1.3.6.1.4.1.89.35.2.6 truthvalue read-write
Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
           rndEraseSimulatedConfiguration 1.3.6.1.4.1.89.35.2.7 integer read-write
eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration. Enumeration: 'eraseSimulatedConfiguration': 1, 'simulatedConfigurationErased': 3, 'simulatedConfigurationPresent': 2.
           rndDeleteValuesTable 1.3.6.1.4.1.89.35.2.8 no-access
This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
               rndDeleteValuesEntry 1.3.6.1.4.1.89.35.2.8.1 no-access
The row definition for the rndDeleteValuesTable table.
                   rndRowStatusVariableName 1.3.6.1.4.1.89.35.2.8.1.1 displaystring read-write
The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
                   rndRowStatusObjectId 1.3.6.1.4.1.89.35.2.8.1.2 object identifier read-write
The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
                   rndRowDeleteValue 1.3.6.1.4.1.89.35.2.8.1.3 integer read-write
The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
                   rndDeleteValueEntryStatus 1.3.6.1.4.1.89.35.2.8.1.4 rowstatus read-write
It is used to delete an entry from this table.
           snmpTesting 1.3.6.1.4.1.89.35.2.9
               rndSimulatedVariablesTable 1.3.6.1.4.1.89.35.2.9.1 no-access
This table indicates which MIB variables are simulated.
                   rndSimulatedVariablesEntry 1.3.6.1.4.1.89.35.2.9.1.1 no-access
The row definition for the rndSimulatedVariablesTable table.
                       rndSimulatedVariableEntryIndex 1.3.6.1.4.1.89.35.2.9.1.1.1 integer read-only
The index entry.
                       rndSimulatedVariableObjectId 1.3.6.1.4.1.89.35.2.9.1.1.2 object identifier read-write
The object id of the simulated variable. If the simulated variable belongs to a table entry, the entire entry is henceforth supported.
                       rndNotSupportedField 1.3.6.1.4.1.89.35.2.9.1.1.3 integer read-only
Variable for not supported simulation.
                       rndSimulatedVariableEntryStatus 1.3.6.1.4.1.89.35.2.9.1.1.4 rowstatus read-write
It is used to delete an entry from this table.
               rndSnmpTestPassword 1.3.6.1.4.1.89.35.2.9.2 integer read-write
This variable enables the user supplying the correct code to use the SNMP test feature.
               rndSnmpTests 1.3.6.1.4.1.89.35.2.9.3 integer read-write
This variable enables the authorized user to test various SNMP features. Enumeration: 'noSimulation': 1, 'simulateSetFailure': 2, 'simulateAppGetNext': 4, 'simulateAppGet': 3.
               rndSimulateUndo 1.3.6.1.4.1.89.35.2.9.4 integer read-write
This variable enables the authorized user to test the SNMP UNDO feature.
               rlSnmpServTestRequest 1.3.6.1.4.1.89.35.2.9.5 integer read-write
This variable enables the authorized user to test the SNMP SERV package.
               rlSnmpServTestResponse 1.3.6.1.4.1.89.35.2.9.6 octet string read-only
This variable enables the authorized user to retrieve the results of a the SNMP SERV package test.
               rlSnmpServCreateTestPool 1.3.6.1.4.1.89.35.2.9.7 integer read-write
This variable enables the authorized user to indicate that after its reset the device should create a buffer pool for SNMPServ process PDU testing. Enumeration: 'create': 1, 'no-create': 2.
               rlSnmpServITCbindClients 1.3.6.1.4.1.89.35.2.9.8 object identifier read-write
This variable enables the authorized user to to indicate that after its reset the device should create ITC clients for SnmpServ data requests clients. The semantics of this variable is as follows: subidentifier 2*n indicates whether the client n is synchronous(1) or asynchronous(2) subidentifier 2*n+1 indicates the number of simulatneous requests expected by client n.
               rlSnmpTestSimulatedVariables 1.3.6.1.4.1.89.35.2.9.9
               rlTstBasicRateTable 1.3.6.1.4.1.89.35.2.9.10 no-access
Table for testing SNMP agent.
                     rlTstBasicRateEntry 1.3.6.1.4.1.89.35.2.9.10.1 no-access
An entry in the rlTstBasicRateTable.
                         rlTstBasicRateIfType 1.3.6.1.4.1.89.35.2.9.10.1.1 integer read-write
Enumeration: 'isdns': 75, 'isdn': 76.
                         rlTstBasicRateLineTopology 1.3.6.1.4.1.89.35.2.9.10.1.2 integer read-write
Enumeration: 'pointToPoint': 1, 'pointToMultipoint': 2.
                         rlTstBasicRateIfMode 1.3.6.1.4.1.89.35.2.9.10.1.3 integer read-write
Enumeration: 'te': 1, 'nt': 2.
                         rlTstBasicRateSignalMode 1.3.6.1.4.1.89.35.2.9.10.1.4 integer read-write
Enumeration: 'active': 1, 'inactive': 2.
           rlMibTree 1.3.6.1.4.1.89.35.2.10
                 rlMibTreeTable 1.3.6.1.4.1.89.35.2.10.1 no-access
This reflects the MIB tree of the device.
                     rlMibTreeEntry 1.3.6.1.4.1.89.35.2.10.1.1 no-access
Each row shows a tree relationsship in the MIB.
                         rlMibTreeFather 1.3.6.1.4.1.89.35.2.10.1.1.1 displaystring no-access
The father in a tree relation ship.
                         rlMibTreeSonIndex 1.3.6.1.4.1.89.35.2.10.1.1.2 integer no-access
Running index for this table.
                         rlMibTreeSon 1.3.6.1.4.1.89.35.2.10.1.1.3 displaystring read-only
The son in a tree relation ship.
                         rlMibTreeSonObjectId 1.3.6.1.4.1.89.35.2.10.1.1.4 object identifier read-only
The object identifier of the son in a tree relation ship.
                         rlMibTreeGrandFather 1.3.6.1.4.1.89.35.2.10.1.1.5 displaystring read-only
The grand father (i.e father's father) in a tree relation ship.
       rsPingMIB 1.3.6.1.4.1.89.35.4
           rsPingTable 1.3.6.1.4.1.89.35.4.1 no-access
A table of ping request entries.
               rsPingEntry 1.3.6.1.4.1.89.35.4.1.1 no-access
A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
                   rsPingAddress 1.3.6.1.4.1.89.35.4.1.1.1 ipaddress read-write
The address of the device to be pinged. Once an instance of this object is created, its value can not be changed.
                   rsPingPacketCount 1.3.6.1.4.1.89.35.4.1.1.2 integer read-write
Specifies the number of ping packets to send to the target in this sequence.
                   rsPingPacketSize 1.3.6.1.4.1.89.35.4.1.1.3 integer read-write
Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent.
                   rsPingPacketTimeout 1.3.6.1.4.1.89.35.4.1.1.4 integer read-write
Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.'
                   rsPingDelay 1.3.6.1.4.1.89.35.4.1.1.5 integer read-write
Specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling.
                   rsPingTrapOnCompletion 1.3.6.1.4.1.89.35.4.1.1.6 truthvalue read-write
Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable.
                   rsPingSentPackets 1.3.6.1.4.1.89.35.4.1.1.7 counter32 read-only
The number of ping packets that have been sent to the target in this sequence.
                   rsPingReceivedPackets 1.3.6.1.4.1.89.35.4.1.1.8 counter32 read-only
The number of ping packets that have been received from the target in this sequence.
                   rsPingMinReturnTime 1.3.6.1.4.1.89.35.4.1.1.9 integer read-only
The minimum round trip time of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
                   rsPingAvgReturnTime 1.3.6.1.4.1.89.35.4.1.1.10 integer read-only
The average round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
                   rsPingMaxReturnTime 1.3.6.1.4.1.89.35.4.1.1.11 integer read-only
The maximum round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
                   rsPingCompletionStatus 1.3.6.1.4.1.89.35.4.1.1.12 integer read-only
If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data. Enumeration: 'host-unreachable': 4, 'ok': 1, 'protocol-unreachable': 5, 'net-unreachable': 3, 'unable-to-send': 8, 'reassembly-time-exceeded': 7, 'timeout': 2, 'time-to-live-exceeded': 6, 'incomplete': 10, 'bad-reply-data': 9.
                   rsPingTimeStamp 1.3.6.1.4.1.89.35.4.1.1.13 displaystring read-only
The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss
                   rsPingEntryStatus 1.3.6.1.4.1.89.35.4.1.1.14 rowstatus read-write
The status of this table entry.
       rsPowerSupplyRedundacy 1.3.6.1.4.1.89.35.5
           rsPowerSupplyRedundacyTable 1.3.6.1.4.1.89.35.5.1 no-access
The power supply redundancy table.
               rsPowerSupplyRedundacyEntry 1.3.6.1.4.1.89.35.5.1.1 no-access
The status of power supply redundancy for this table.
                   rsPowerSupplyRedundacyReNumber 1.3.6.1.4.1.89.35.5.1.1.1 integer read-only
This number identifies the module backed up by power supply redundancy in the stack.
                   rsPowerSupplyRedundacyStatus 1.3.6.1.4.1.89.35.5.1.1.2 integer read-only
The status of a power supply redundancy of the entry. Enumeration: 'notExist': 1, 'existButNotWorking': 2, 'externalOnlyWorking': 5, 'internalOnlyWorking': 4, 'bothWorking': 3.
       rsNvram 1.3.6.1.4.1.89.35.6
           rsEraseNvramAfterReset 1.3.6.1.4.1.89.35.6.1 displaystring read-write
The name of NVRAM application that will be erased after reset or ALL if all NVRAM should be erased.
           rsNvramApplTable 1.3.6.1.4.1.89.35.6.2 no-access
The NVRAM application table.
               rsNvramApplEntry 1.3.6.1.4.1.89.35.6.2.1 no-access
The status of NVRAM application table.
                   rsNvramApplIndex 1.3.6.1.4.1.89.35.6.2.1.1 integer read-only
The index of NVRAM application table.
                   rsNvramApplName 1.3.6.1.4.1.89.35.6.2.1.2 displaystring read-only
The name of application used NVRAM.