RADLAN-QOS-CLI-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-QOS-CLI-MIB
Download as:   
SNMPv2-CONF, IF-MIB, RADLAN-POLICY-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, RADLAN-MIB, SNMPv2-TC, RADLAN-BRIDGEMIBOBJECTS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlQosCliMib 1.3.6.1.4.1.89.88
Added: StatisticsCntrNumOfBitsType StatisticsCntrType rlQosStatistics rlQosPortPolicyStatisticsTable rlQosSinglePolicerStatisticsTable rlQosAggregatePolicerStatisticsTable rlQosOutQueueStatisticsTable rlQosGlobalStatisticsCntrsTable.
       rlQosCliQosMode 1.3.6.1.4.1.89.88.1 qosglobalmode read-write
*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which mode the system will work: basic , advance or none.
       rlQosCliBasicModeCfg 1.3.6.1.4.1.89.88.2 qostrustmode read-write
*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which trust mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none or vpt-dscp.
       rlQosMaxNumOfAce 1.3.6.1.4.1.89.88.3 integer read-only
This scalar define the max number of aces.
       rlQosOffsetTable 1.3.6.1.4.1.89.88.4 no-access
This table specifies Offset Table information
           rlQosOffsetEntry 1.3.6.1.4.1.89.88.4.1 no-access
Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex
               rlQosOffsetIndex 1.3.6.1.4.1.89.88.4.1.1 integer no-access
An arbitrary incremental Index for the offset table.
               rlQosOffsetType 1.3.6.1.4.1.89.88.4.1.2 classoffsettype read-only
Start of the offset.
               rlQosOffsetValue 1.3.6.1.4.1.89.88.4.1.3 integer read-only
The Offset value.
               rlQosOffsetMask 1.3.6.1.4.1.89.88.4.1.4 integer read-only
Define which bit to be extracted from the offset.
               rlQosOffsetPattern 1.3.6.1.4.1.89.88.4.1.5 integer read-only
The value to match too.
               rlQosOffsetTuplePointer 1.3.6.1.4.1.89.88.4.1.6 integer read-only
Pointer for the relevant Tuple.
               rlQosOffsetStatus 1.3.6.1.4.1.89.88.4.1.7 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosTupleTable 1.3.6.1.4.1.89.88.5 no-access
This table specifies Tuple Table information
           rlQosTupleEntry 1.3.6.1.4.1.89.88.5.1 no-access
Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex
               rlQosTupleIndex 1.3.6.1.4.1.89.88.5.1.1 integer no-access
An arbitrary incremental Index for the offset table.
               rlQosTupleType 1.3.6.1.4.1.89.88.5.1.2 classtupletype read-only
Start of the offset.
               rlQosTupleValue1 1.3.6.1.4.1.89.88.5.1.3 integer read-only
The Tuple no.1 value can be regular integer values only.
               rlQosTupleValue2 1.3.6.1.4.1.89.88.5.1.4 octet string read-only
The Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask
               rlQosTupleStatus 1.3.6.1.4.1.89.88.5.1.5 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosAceTable 1.3.6.1.4.1.89.88.6 no-access
This table specifies ACE table information
           rlQosAceEntry 1.3.6.1.4.1.89.88.6.1 no-access
Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex
               rlQosAceIndex 1.3.6.1.4.1.89.88.6.1.1 integer no-access
An arbitrary incremental Index for the ACE table.
               rlQosAceAction 1.3.6.1.4.1.89.88.6.1.2 aceactiontype read-only
ACE Action to take.
               rlQosAceType 1.3.6.1.4.1.89.88.6.1.3 aceobjecttype read-only
ACE Type
               rlQosAceTuple1 1.3.6.1.4.1.89.88.6.1.4 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple2 1.3.6.1.4.1.89.88.6.1.5 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple3 1.3.6.1.4.1.89.88.6.1.6 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple4 1.3.6.1.4.1.89.88.6.1.7 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple5 1.3.6.1.4.1.89.88.6.1.8 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple6 1.3.6.1.4.1.89.88.6.1.9 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple7 1.3.6.1.4.1.89.88.6.1.10 integer read-only
ACE Tuple 1 pointer.
               rlQosAceTuple8 1.3.6.1.4.1.89.88.6.1.11 integer read-only
ACE Tuple 1 pointer.
               rlQosAceAccount 1.3.6.1.4.1.89.88.6.1.12 binarystatus read-only
ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
               rlQosAceStatus 1.3.6.1.4.1.89.88.6.1.13 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosAclTable 1.3.6.1.4.1.89.88.7 no-access
This table specifies ACL table information
           rlQosAclEntry 1.3.6.1.4.1.89.88.7.1 no-access
Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex
               rlQosAclIndex 1.3.6.1.4.1.89.88.7.1.1 integer no-access
An arbitrary incremental Index for the ACE table.
               rlQosAclName 1.3.6.1.4.1.89.88.7.1.2 displaystring read-only
Name ACL.
               rlQosAclType 1.3.6.1.4.1.89.88.7.1.3 aclobjecttype read-only
ACL Type.
               rlQosAclStatus 1.3.6.1.4.1.89.88.7.1.4 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
               rlQosAclNumOfAces 1.3.6.1.4.1.89.88.7.1.5 integer read-only
Holds number of aces in the acl.
       rlQosAclAceRefTable 1.3.6.1.4.1.89.88.8 no-access
This table specifies the ACE to ACL relationship.
           rlQosAclAceRefEntry 1.3.6.1.4.1.89.88.8.1 no-access
Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer
               rlQosAclAceRefAcePointer 1.3.6.1.4.1.89.88.8.1.1 integer no-access
The Index is the ACE pointer
               rlQosAclAceRefAclPointer 1.3.6.1.4.1.89.88.8.1.2 integer read-only
ACL index Pointer
               rlQosAclAceRefStatus 1.3.6.1.4.1.89.88.8.1.3 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosClassMapTable 1.3.6.1.4.1.89.88.9 no-access
This table specifies CCL table information
           rlQosClassMapEntry 1.3.6.1.4.1.89.88.9.1 no-access
Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex
               rlQosClassMapIndex 1.3.6.1.4.1.89.88.9.1.1 integer no-access
Class Map Index
               rlQosClassMapName 1.3.6.1.4.1.89.88.9.1.2 displaystring read-only
Name of the Class Map.
               rlQosClassMapType 1.3.6.1.4.1.89.88.9.1.3 classmaptype read-only
Class map type
               rlQosClassMapAction 1.3.6.1.4.1.89.88.9.1.4 classmapaction read-only
Class Map Action.
               rlQosClassMapMarkValue 1.3.6.1.4.1.89.88.9.1.5 integer read-only
Mark value when mark action has been chosen in Class Map Action field.
               rlQosClassMapPolicer 1.3.6.1.4.1.89.88.9.1.6 integer read-only
Policer pointer. 0-means no policer.
               rlQosClassMapMatch1 1.3.6.1.4.1.89.88.9.1.7 integer read-only
Match ACL 1 pointer.
               rlQosClassMapMatch2 1.3.6.1.4.1.89.88.9.1.8 integer read-only
Match ACL 2 pointer.
               rlQosClassMapMarkVlan 1.3.6.1.4.1.89.88.9.1.9 markvlanaction read-only
If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet.
               rlQosClassMapNewVlan 1.3.6.1.4.1.89.88.9.1.10 integer read-only
If rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.
               rlQosClassMapRedirectAction 1.3.6.1.4.1.89.88.9.1.11 redirectaction read-only
Specifiy the redirection action.
               rlQosClassMapDestInterface 1.3.6.1.4.1.89.88.9.1.12 integer read-only
Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was forwarded.
               rlQosClassMapStatus 1.3.6.1.4.1.89.88.9.1.13 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
               rlQosClassMapMatch3 1.3.6.1.4.1.89.88.9.1.14 integer read-only
Match ACL 3 pointer.
               rlQosClassMapTrapId 1.3.6.1.4.1.89.88.9.1.15 integer read-only
If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.
               rlQosClassMapCounterEnable 1.3.6.1.4.1.89.88.9.1.16 truthvalue read-only
Enable/disable counting per class map. Counts packets matche the class map rules.
               rlQosClassMapTunnelIdx 1.3.6.1.4.1.89.88.9.1.17 unsigned32 read-only
If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet
       rlQosPolicerTable 1.3.6.1.4.1.89.88.10 no-access
This table specifies All the Policers in the system Information
             rlQosPolicerEntry 1.3.6.1.4.1.89.88.10.1 no-access
Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex
                 rlQosPolicerIndex 1.3.6.1.4.1.89.88.10.1.1 integer no-access
Policer Index.
                 rlQosPolicerName 1.3.6.1.4.1.89.88.10.1.2 displaystring read-only
Name of the Policer.
                 rlQosPolicerType 1.3.6.1.4.1.89.88.10.1.3 policertype read-only
Policer type
                 rlQosPolicerCir 1.3.6.1.4.1.89.88.10.1.4 unsigned32 read-only
Committed rate value.
                 rlQosPolicerCbs 1.3.6.1.4.1.89.88.10.1.5 unsigned32 read-only
Committed burst Value.
                 rlQosPolicerAction 1.3.6.1.4.1.89.88.10.1.6 policeraction read-only
Out of profile Action.
                 rlQosPolicerCasPointerRemVal 1.3.6.1.4.1.89.88.10.1.7 integer read-only
Remark value in case of explicit remark. The functionality as cascade pointer is obsolete.
                 rlQosPolicerStatus 1.3.6.1.4.1.89.88.10.1.8 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
                 rlQosPolicerPir 1.3.6.1.4.1.89.88.10.1.9 unsigned32 read-only
Peak rate value. When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.
                 rlQosPolicerPbs 1.3.6.1.4.1.89.88.10.1.10 unsigned32 read-only
Peak burst Value. When both this and rlQosPolicerPir are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.
                 rlQosPolicerPeakAction 1.3.6.1.4.1.89.88.10.1.11 policeraction read-only
Out of profile peak action.
       rlQosPolicyMapTable 1.3.6.1.4.1.89.88.11 no-access
This table specifies Policy Map Table Information
             rlQosPolicyMapEntry 1.3.6.1.4.1.89.88.11.1 no-access
Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex
                 rlQosPolicyMapIndex 1.3.6.1.4.1.89.88.11.1.1 integer no-access
Policy map Index.
                 rlQosPolicyMapName 1.3.6.1.4.1.89.88.11.1.2 displaystring read-only
Policy map Name.
                 rlQosPolicyMapStatus 1.3.6.1.4.1.89.88.11.1.3 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosPolicyClassRefTable 1.3.6.1.4.1.89.88.12 no-access
This table specifies The relationship between policy map to class map
             rlQosPolicyClassRefEntry 1.3.6.1.4.1.89.88.12.1 no-access
Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer
                 rlQosPolicyClassRefClassPointer 1.3.6.1.4.1.89.88.12.1.1 integer no-access
The Index is the Class-map pointer
                 rlQosPolicyClassRefPolicyPointer 1.3.6.1.4.1.89.88.12.1.2 integer read-only
Policy map index Pointer
                 rlQosPolicyClassRefStatus 1.3.6.1.4.1.89.88.12.1.3 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosIfPolicyTable 1.3.6.1.4.1.89.88.13 no-access
This table specifies for each interface the Policy Map attach to it
             rlQosIfPolicyEntry 1.3.6.1.4.1.89.88.13.1 no-access
Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType
                 rlIfIndex 1.3.6.1.4.1.89.88.13.1.1 integer no-access
Interface Index.
                 rlIfType 1.3.6.1.4.1.89.88.13.1.2 interfacetype no-access
Interface Type(vlan/port).
                 rlQosIfPolicyMapPointerIn 1.3.6.1.4.1.89.88.13.1.3 integer read-only
Policy map pointer Input.
                 rlQosIfPolicyMapPointerOut 1.3.6.1.4.1.89.88.13.1.4 integer read-only
Policy map pointer Output.
                 rlQosIfTrustActive 1.3.6.1.4.1.89.88.13.1.5 binarystatus read-only
Interface Basic Mode Trust is active or not .
                 rlQosPortShaperStatus 1.3.6.1.4.1.89.88.13.1.6 binarystatus read-only
If there is shaper on the port
                 rlQosCirPortShaper 1.3.6.1.4.1.89.88.13.1.7 integer read-only
The CIR for the port shaper. N/A when the shper is disabled
                 rlQosCbsPortShaper 1.3.6.1.4.1.89.88.13.1.8 integer read-only
The CBS for the port shaper. N/A when the shper is disabled
                 rlQosIfProfilePointer 1.3.6.1.4.1.89.88.13.1.9 displaystring read-only
Interface Profile name pointer.
                 rlQosQueueProfilePointer 1.3.6.1.4.1.89.88.13.1.10 displaystring read-only
Queue Profile name pointer.
                 rlQosQueueShapeProfilePointer 1.3.6.1.4.1.89.88.13.1.11 integer read-only
Queue shape Profile pointer.
                 rlQosAclDefaultAction 1.3.6.1.4.1.89.88.13.1.12 acldefaultaction read-only
When one ACL is enterd then what to do for the last rull.
                 rlQosIfPolicyMapStatus 1.3.6.1.4.1.89.88.13.1.13 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
                 rlQosIfAclIn 1.3.6.1.4.1.89.88.13.1.14 integer read-only
Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
                 rlQosIfAclOut 1.3.6.1.4.1.89.88.13.1.15 integer read-only
Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
                 rlQosIfPolicerIn 1.3.6.1.4.1.89.88.13.1.16 integer read-only
Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.
                 rlQosPortRateLimitStatus 1.3.6.1.4.1.89.88.13.1.17 binarystatus read-only
If there is Rate limit on the port
                 rlQosCirPortRateLimit 1.3.6.1.4.1.89.88.13.1.18 integer read-only
The CIR for the port rate limit. N/A when the Rate limit is disabled
                 rlQosCbsPortRateLimit 1.3.6.1.4.1.89.88.13.1.19 integer read-only
The CBS for the port Rate limit. N/A when the Rate limit is disabled
                 rlQosIfIpv6AclIn 1.3.6.1.4.1.89.88.13.1.20 integer read-only
Index of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
                 rlQosIfIpv6AclOut 1.3.6.1.4.1.89.88.13.1.21 integer read-only
Index of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
                 rlQosAclDefaultActionOut 1.3.6.1.4.1.89.88.13.1.22 acldefaultaction read-only
When one egress ACL is enterd then what to do for the last rull.
       rlQosIfProfileCfgTable 1.3.6.1.4.1.89.88.14 no-access
This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.
             rlQosIfProfileCfgEntry 1.3.6.1.4.1.89.88.14.1 no-access
Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId
                 rlIfProfileName 1.3.6.1.4.1.89.88.14.1.1 displaystring no-access
Interface Index.
                 rlQosQueueId 1.3.6.1.4.1.89.88.14.1.2 integer no-access
Queue id Index.
                 rlQosTdThersholdDp0 1.3.6.1.4.1.89.88.14.1.3 integer read-only
Tail Drop Threshold for Drop Precedence 0.
                 rlQosTdThersholdDp1 1.3.6.1.4.1.89.88.14.1.4 integer read-only
Tail Drop Threshold for Drop Precedence 1.
                 rlQosTdThersholdDp2 1.3.6.1.4.1.89.88.14.1.5 integer read-only
Tail Drop Threshold for Drop Precedence 2.
                 rlQosRedMinDp0 1.3.6.1.4.1.89.88.14.1.6 integer read-only
WRED Min Threshold for Drop Precedence 2.
                 rlQosRedMaxDp0 1.3.6.1.4.1.89.88.14.1.7 integer read-only
WRED Max Threshold for Drop Precedence 0.
                 rlQosRedProbDp0 1.3.6.1.4.1.89.88.14.1.8 integer read-only
WRED probability for Drop Precedence 0.
                 rlQosRedMinDp1 1.3.6.1.4.1.89.88.14.1.9 integer read-only
WRED Min Threshold for Drop Precedence 2.
                 rlQosRedMaxDp1 1.3.6.1.4.1.89.88.14.1.10 integer read-only
WRED Max Threshold for Drop Precedence 1.
                 rlQosRedProbDp1 1.3.6.1.4.1.89.88.14.1.11 integer read-only
WRED probability for Drop Precedence 1.
                 rlQosRedMinDp2 1.3.6.1.4.1.89.88.14.1.12 integer read-only
WRED Min Threshold for Drop Precedence 2.
                 rlQosRedMaxDp2 1.3.6.1.4.1.89.88.14.1.13 integer read-only
WRED Max Threshold for Drop Precedence 2.
                 rlQosRedProbDp2 1.3.6.1.4.1.89.88.14.1.14 integer read-only
WRED probability for Drop Precedence 2.
                 rlQosRedQweight 1.3.6.1.4.1.89.88.14.1.15 integer read-only
Q factor for WRED.
                 rlQosIfprofileStatus 1.3.6.1.4.1.89.88.14.1.16 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosDscpMutationTable 1.3.6.1.4.1.89.88.15 no-access
This table specifies The DSCP Mutation table
             rlQosDscpMutationEntry 1.3.6.1.4.1.89.88.15.1 no-access
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
                 rlQosOldDscp 1.3.6.1.4.1.89.88.15.1.1 integer no-access
Old DSCP.
                 rlQosNewDscp 1.3.6.1.4.1.89.88.15.1.2 integer read-only
New DSCP.
       rlQosDscpRemarkTable 1.3.6.1.4.1.89.88.16 no-access
This table specifies The DSCP Remark table
             rlQosDscpRemarkEntry 1.3.6.1.4.1.89.88.16.1 no-access
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
                 rlQosRmOldDscp 1.3.6.1.4.1.89.88.16.1.1 integer no-access
Old DSCP.
                 rlQosRmNewDscp 1.3.6.1.4.1.89.88.16.1.2 integer read-only
Specifies new DSCP in the violation action.
                 rlQosRmNewExceedDscp 1.3.6.1.4.1.89.88.16.1.3 integer read-only
Specifies new DSCP in the exceed action.
       rlQosCosQueueTable 1.3.6.1.4.1.89.88.17 no-access
This table specifies The Cos to queue map table
             rlQosCosQueueEntry 1.3.6.1.4.1.89.88.17.1 no-access
Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex
                 rlQosCosIndex 1.3.6.1.4.1.89.88.17.1.1 integer no-access
CoS value (0-7).
                 rlQosCosQueueId 1.3.6.1.4.1.89.88.17.1.2 integer read-only
Queue ID.
       rlQosDscpQueueTable 1.3.6.1.4.1.89.88.18 no-access
This table specifies The DSCP to Queue map table
             rlQosDscpQueueEntry 1.3.6.1.4.1.89.88.18.1 no-access
Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex
                 rlQosDscpIndex 1.3.6.1.4.1.89.88.18.1.1 integer no-access
DSCP value.
                 rlQosQueueNum 1.3.6.1.4.1.89.88.18.1.2 integer read-only
Queue Number.
       rlQosTcpPortQueueTable 1.3.6.1.4.1.89.88.19 no-access
This table specifies TCP Port to Queue map table
             rlQosTcpPortQueueEntry 1.3.6.1.4.1.89.88.19.1 no-access
Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort
                 rlQosTcpPort 1.3.6.1.4.1.89.88.19.1.1 integer no-access
TCP port number.
                 rlQosTcpQueueValue 1.3.6.1.4.1.89.88.19.1.2 integer read-only
Queue Number.
                 rlQosTcpPortQueueStatus 1.3.6.1.4.1.89.88.19.1.3 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosUdpPortQueueTable 1.3.6.1.4.1.89.88.20 no-access
This table specifies UDP Port to Queue map table
             rlQosUdpPortQueueEntry 1.3.6.1.4.1.89.88.20.1 no-access
Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort
                 rlQosUdpPort 1.3.6.1.4.1.89.88.20.1.1 integer no-access
UDP port number.
                 rlQosUdpQueueValue 1.3.6.1.4.1.89.88.20.1.2 integer read-only
Queue value.
                 rlQosUdpPortQueueStatus 1.3.6.1.4.1.89.88.20.1.3 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosEfManageTable 1.3.6.1.4.1.89.88.21 no-access
This table specifies UDP Port to DSCP map table
             rlQosEfManageEntry 1.3.6.1.4.1.89.88.21.1 no-access
This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId
                 rlQosEfQueueId 1.3.6.1.4.1.89.88.21.1.1 integer no-access
Queue-ID.
                 rlQosEfState 1.3.6.1.4.1.89.88.21.1.2 binarystatus read-only
Enable/disable
                 rlQosEfPriority 1.3.6.1.4.1.89.88.21.1.3 integer read-only
The priority of the queue
       rlQosQueueProfileTable 1.3.6.1.4.1.89.88.22 no-access
This table describes the queue managment profiles
             rlQosQueueProfileEntry 1.3.6.1.4.1.89.88.22.1 no-access
Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName
                 rlQueueProfileName 1.3.6.1.4.1.89.88.22.1.1 displaystring no-access
Profile name for the Queue profile.
                 rlQosTypeQueue1 1.3.6.1.4.1.89.88.22.1.2 queuetype read-only
EF or WRR
                 rlQosValueQueue1 1.3.6.1.4.1.89.88.22.1.3 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue2 1.3.6.1.4.1.89.88.22.1.4 queuetype read-only
EF or WRR
                 rlQosValueQueue2 1.3.6.1.4.1.89.88.22.1.5 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue3 1.3.6.1.4.1.89.88.22.1.6 queuetype read-only
EF or WRR
                 rlQosValueQueue3 1.3.6.1.4.1.89.88.22.1.7 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue4 1.3.6.1.4.1.89.88.22.1.8 queuetype read-only
EF or WRR
                 rlQosValueQueue4 1.3.6.1.4.1.89.88.22.1.9 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue5 1.3.6.1.4.1.89.88.22.1.10 queuetype read-only
EF or WRR
                 rlQosValueQueue5 1.3.6.1.4.1.89.88.22.1.11 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue6 1.3.6.1.4.1.89.88.22.1.12 queuetype read-only
EF or WRR
                 rlQosValueQueue6 1.3.6.1.4.1.89.88.22.1.13 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue7 1.3.6.1.4.1.89.88.22.1.14 queuetype read-only
EF or WRR
                 rlQosValueQueue7 1.3.6.1.4.1.89.88.22.1.15 integer read-only
for EF read-only for wrr the weight
                 rlQosTypeQueue8 1.3.6.1.4.1.89.88.22.1.16 queuetype read-only
EF or WRR
                 rlQosValueQueue8 1.3.6.1.4.1.89.88.22.1.17 integer read-only
for EF read-only for wrr the weight
                 rlQosQueueProfileStatus 1.3.6.1.4.1.89.88.22.1.18 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
                 rlQosNumOfIfConnections 1.3.6.1.4.1.89.88.22.1.19 integer read-only
how many time this entry connected to the if policy table
       rlQosQueueShapeProfileTable 1.3.6.1.4.1.89.88.23 no-access
This table specifies the queue shaper profile
             rlQosQueueShapeProfileEntry 1.3.6.1.4.1.89.88.23.1 no-access
Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex
                 rlQosQueueShapeIndex 1.3.6.1.4.1.89.88.23.1.1 integer no-access
Profile Index.
                 rlQosCirQueue1 1.3.6.1.4.1.89.88.23.1.2 integer read-only
CIR for Queue1 0 for not active
                 rlQosCbsQueue1 1.3.6.1.4.1.89.88.23.1.3 integer read-only
CBS for Queue1 0 for not active
                 rlQosCirQueue2 1.3.6.1.4.1.89.88.23.1.4 integer read-only
CIR for Queue2 0 for not active
                 rlQosCbsQueue2 1.3.6.1.4.1.89.88.23.1.5 integer read-only
CBS for Queue2 0 for not active
                 rlQosCirQueue3 1.3.6.1.4.1.89.88.23.1.6 integer read-only
CIR for Queue3 0 for not active
                 rlQosCbsQueue3 1.3.6.1.4.1.89.88.23.1.7 integer read-only
CBS for Queue3 0 for not active
                 rlQosCirQueue4 1.3.6.1.4.1.89.88.23.1.8 integer read-only
CIR for Queue4 0 for not active
                 rlQosCbsQueue4 1.3.6.1.4.1.89.88.23.1.9 integer read-only
CBS for Queue4 0 for not active
                 rlQosCirQueue5 1.3.6.1.4.1.89.88.23.1.10 integer read-only
CIR for Queue5 0 for not active
                 rlQosCbsQueue5 1.3.6.1.4.1.89.88.23.1.11 integer read-only
CBS for Queue5 0 for not active
                 rlQosCirQueue6 1.3.6.1.4.1.89.88.23.1.12 integer read-only
CIR for Queue6 0 for not active
                 rlQosCbsQueue6 1.3.6.1.4.1.89.88.23.1.13 integer read-only
CBS for Queue6 0 for not active
                 rlQosCirQueue7 1.3.6.1.4.1.89.88.23.1.14 integer read-only
CIR for Queue7 0 for not active
                 rlQosCbsQueue7 1.3.6.1.4.1.89.88.23.1.15 integer read-only
CBS for Queue7 0 for not active
                 rlQosCirQueue8 1.3.6.1.4.1.89.88.23.1.16 integer read-only
CIR for Queue8 0 for not active
                 rlQosCbsQueue8 1.3.6.1.4.1.89.88.23.1.17 integer read-only
CBS for Queue8 0 for not active
                 rlQosQueueShapeProfileStatus 1.3.6.1.4.1.89.88.23.1.18 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosAclCounterTable 1.3.6.1.4.1.89.88.24 no-access
The table is used to show statistics for ACL applied on an interface.
             rlQosAclCounterEntry 1.3.6.1.4.1.89.88.24.1 no-access
This entry shows value of conter for a particular ACE of an ACL.
                 rlQosAclCounterInterface 1.3.6.1.4.1.89.88.24.1.1 interfaceindex read-only
Interface Index on which ACL is applied.
                 rlQosAclCounterAclIndex 1.3.6.1.4.1.89.88.24.1.2 integer read-only
Index of ACL, which was applied on the IfIndex.
                 rlQosAclCounterAceIndex 1.3.6.1.4.1.89.88.24.1.3 integer read-only
Index of ACE, which is belong to an ACL.
                 rlQosAclCounterValue 1.3.6.1.4.1.89.88.24.1.4 counter32 read-only
The value of the ACE counter.
       rlQosFreeIndexesTable 1.3.6.1.4.1.89.88.25 no-access
The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases.
             rlQosFreeIndexesEntry 1.3.6.1.4.1.89.88.25.1 no-access
The entry is used to get free index for particular table.
                 rlQosFreeIndexesTableId 1.3.6.1.4.1.89.88.25.1.1 integer read-only
Identification of the table, for which free index is retrieved. Enumeration: 'ace': 3, 'tuple': 1, 'acl': 4, 'shaper': 8, 'policer': 7, 'offset': 2, 'policy': 6, 'class': 5.
                 rlQosFreeIndexesValue 1.3.6.1.4.1.89.88.25.1.2 integer read-only
Free index for table. 0 means no free entries.
       rlQosNamesToIndexesTable 1.3.6.1.4.1.89.88.26 no-access
The table is used to get the ACL,Class-Map and Policy-Map indexes from the name.
             rlQosNamesToIndexesEntry 1.3.6.1.4.1.89.88.26.1 no-access
The entry is used to get index form particular name and table type.
                 rlQosNamesToIndexesTableId 1.3.6.1.4.1.89.88.26.1.1 integer no-access
Identification of the table, for which the index is retrieved. Enumeration: 'policy': 3, 'policer': 4, 'class': 2, 'acl': 1.
                 rlQosNamesToIndexesName 1.3.6.1.4.1.89.88.26.1.2 displaystring no-access
The name of the entry
                 rlQosNamesToIndexesValue 1.3.6.1.4.1.89.88.26.1.3 integer read-only
the index for table
       rlQosStackControlQueue 1.3.6.1.4.1.89.88.27 integer read-only
This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue.
       rlQosStackControlCos 1.3.6.1.4.1.89.88.28 integer read-only
This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue.
       rlQosCosQueueDefaultMapTable 1.3.6.1.4.1.89.88.29 no-access
The table is used to set default 802.1p map (vpt to queue)
             rlQosCosQueueDefaultMapEntry 1.3.6.1.4.1.89.88.29.1 no-access
The entry is used to get index form particular name and table type.
                 rlQosCosQueueDefaultMapVpt 1.3.6.1.4.1.89.88.29.1.1 integer read-only
vlan priority tag , 3 bits of priority which determine the service class.
                 rlQosCosQueueDefaultMapQueueId 1.3.6.1.4.1.89.88.29.1.2 integer read-only
the queue id vary from the first queue id to Max Number of queues supported
       rlQosPredefBlockAclTable 1.3.6.1.4.1.89.88.30 no-access
The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs.
             rlQosPredefBlockAclEntry 1.3.6.1.4.1.89.88.30.1 no-access
The entry is used to apply predefined ACLs to the interface.
                 rlQosPredefBlockAclIfIndex 1.3.6.1.4.1.89.88.30.1.1 interfaceindex no-access
IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.
                 rlQosPredefBlockAclIfType 1.3.6.1.4.1.89.88.30.1.2 interfacetype no-access
Interface Type(vlan/port).
                 rlQosPredefBlockAclMask 1.3.6.1.4.1.89.88.30.1.3 octet string read-only
This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames
                 rlQosPredefBlockAclStatus 1.3.6.1.4.1.89.88.30.1.4 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosAceTidxTable 1.3.6.1.4.1.89.88.31 no-access
This table specifies ACE table with two index information
             rlQosAceTidxEntry 1.3.6.1.4.1.89.88.31.1 no-access
Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index
                 rlQosAceTidxAclIndex 1.3.6.1.4.1.89.88.31.1.1 integer no-access
An arbitrary incremental Index for the ACL ACE connection.
                 rlQosAceTidxIndex 1.3.6.1.4.1.89.88.31.1.2 integer no-access
An arbitrary incremental Index for the ACE table.
                 rlQosAceTidxAction 1.3.6.1.4.1.89.88.31.1.3 aceactiontype read-only
ACE Action to take.
                 rlQosAceTidxType 1.3.6.1.4.1.89.88.31.1.4 aceobjecttype read-only
ACE Type
                 rlQosAceTidxTuple1 1.3.6.1.4.1.89.88.31.1.5 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple2 1.3.6.1.4.1.89.88.31.1.6 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple3 1.3.6.1.4.1.89.88.31.1.7 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple4 1.3.6.1.4.1.89.88.31.1.8 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple5 1.3.6.1.4.1.89.88.31.1.9 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple6 1.3.6.1.4.1.89.88.31.1.10 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple7 1.3.6.1.4.1.89.88.31.1.11 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple8 1.3.6.1.4.1.89.88.31.1.12 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxAccount 1.3.6.1.4.1.89.88.31.1.13 binarystatus read-only
ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
                 rlQosAceTidxStatus 1.3.6.1.4.1.89.88.31.1.14 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
                 rlQosAceTidxTimeRange 1.3.6.1.4.1.89.88.31.1.15 displaystring read-only
ACE time range name.
                 rlQosAceTidxTimeRangeIsActive 1.3.6.1.4.1.89.88.31.1.16 truthvalue read-only
ACE time range is rule active state shows is ACE currently active or not.
                 rlQosAceTidxTuple9 1.3.6.1.4.1.89.88.31.1.17 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple10 1.3.6.1.4.1.89.88.31.1.18 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxTuple11 1.3.6.1.4.1.89.88.31.1.19 integer read-only
ACE Tuple pointer.
                 rlQosAceTidxActionDropType 1.3.6.1.4.1.89.88.31.1.20 rlqosacetidxactiondroptype read-only
This field is valid only if AceActionType is deny or deny-DisablePort.
       rlQosMibVersion 1.3.6.1.4.1.89.88.32 integer read-only
MIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable 9 - Add statistics 10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType 11 - Added rlQosCPUSafeGuardEnable
       rlQosDscpQueueDefaultMapTable 1.3.6.1.4.1.89.88.33 no-access
The table is used to set default dscp to queue map
             rlQosDscpQueueDefaultMapEntry 1.3.6.1.4.1.89.88.33.1 no-access
The entry is used to get index form particular name and table type.
                 rlQosDscpQueueDefaultMapDscp 1.3.6.1.4.1.89.88.33.1.1 integer read-only
dscp , 6 bits of priority which determine the service class.
                 rlQosDscpQueueDefaultMapQueueId 1.3.6.1.4.1.89.88.33.1.2 integer read-only
the queue id vary from the first queue id to Max Number of queues supported
       rlQosDscpToDpTable 1.3.6.1.4.1.89.88.34 no-access
This table specifies The DSCP To Dp table
             rlQosDscpToDpEntry 1.3.6.1.4.1.89.88.34.1 no-access
Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp
                 rlQosDscp 1.3.6.1.4.1.89.88.34.1.1 integer no-access
Packet DSCP.
                 rlQosDp 1.3.6.1.4.1.89.88.34.1.2 integer read-only
New DP.
       rlQosStatistics 1.3.6.1.4.1.89.88.35
             rlQosPortPolicyStatisticsTable 1.3.6.1.4.1.89.88.35.1 no-access
This table specifies statistics counter for policies with specific actions
                 rlQosPortPolicyStatisticsEntry 1.3.6.1.4.1.89.88.35.1.1 no-access
Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled.
                     rlQosPortPolicyStatisticsCntrType 1.3.6.1.4.1.89.88.35.1.1.1 statisticscntrtype read-write
Counter type.
                     rlQosPortPolicyStatisticsCntrNumOfBits 1.3.6.1.4.1.89.88.35.1.1.2 statisticscntrnumofbitstype read-only
Counter size in bits.
                     rlQosPortPolicyStatisticsEnableCounting 1.3.6.1.4.1.89.88.35.1.1.3 truthvalue read-write
Indication whether the counter is enabled.
                     rlQosPortPolicyStatisticsCounterValue 1.3.6.1.4.1.89.88.35.1.1.4 counter64 read-only
Counter value.
             rlQosSinglePolicerStatisticsTable 1.3.6.1.4.1.89.88.35.2 no-access
This table specifies statistics counters per QoS meter
                 rlQosSinglePolicerStatisticsEntry 1.3.6.1.4.1.89.88.35.2.1 no-access
Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes.
                     rlQosSinglePolicerStatisticsInProfileCounterValue 1.3.6.1.4.1.89.88.35.2.1.1 counter64 read-only
Counter value of in profile traffic.
                     rlQosSinglePolicerStatisticsInProfileCntrNumOfBits 1.3.6.1.4.1.89.88.35.2.1.2 statisticscntrnumofbitstype read-only
Counter size in bits for in profile counter.
                     rlQosSinglePolicerStatisticsOutProfileCounterValue 1.3.6.1.4.1.89.88.35.2.1.3 counter64 read-only
Counter value of Out Profile traffic.
                     rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits 1.3.6.1.4.1.89.88.35.2.1.4 statisticscntrnumofbitstype read-only
Counter size in bits for out profile counter.
                     rlQosSinglePolicerStatisticsStatus 1.3.6.1.4.1.89.88.35.2.1.5 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
             rlQosAggregatePolicerStatisticsTable 1.3.6.1.4.1.89.88.35.3 no-access
This table specifies statistics counters per QoS aggregate meter
                 rlQosAggregatePolicerStatisticsEntry 1.3.6.1.4.1.89.88.35.3.1 no-access
Each entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter for the meter is enabled and three counters values - for green, yellow and red profiles bytes.
                     rlQosAggregatePolicerStatisticsInProfileCounterValue 1.3.6.1.4.1.89.88.35.3.1.1 counter64 read-only
Counter value of In Profile amount of bytes.
                     rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits 1.3.6.1.4.1.89.88.35.3.1.2 statisticscntrnumofbitstype read-only
Counter size in bits for In Profile .
                     rlQosAggregatePolicerStatisticsOutProfileCounterValue 1.3.6.1.4.1.89.88.35.3.1.3 counter64 read-only
Counter value of Out Profile amount of bytes.
                     rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits 1.3.6.1.4.1.89.88.35.3.1.4 statisticscntrnumofbitstype read-only
Counter size in bits for Out Profile.
                     rlQosAggregatePolicerStatisticsStatus 1.3.6.1.4.1.89.88.35.3.1.5 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
             rlQosOutQueueStatisticsTable 1.3.6.1.4.1.89.88.35.4 no-access
This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence
                 rlQosOutQueueStatisticsEntry 1.3.6.1.4.1.89.88.35.4.1 no-access
Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port represent by rlQosOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value.
                     rlQosOutQueueStatisticsCountrID 1.3.6.1.4.1.89.88.35.4.1.1 integer read-write
Counter id, the key of the table.
                     rlQosOutQueueStatisticsIfIndexList 1.3.6.1.4.1.89.88.35.4.1.2 portlist read-write
Port for which the flow is counted.
                     rlQosOutQueueStatisticsPortAll 1.3.6.1.4.1.89.88.35.4.1.3 truthvalue read-write
Indication for whether the port is configured as range of all the ports
                     rlQosOutQueueStatisticsVlan 1.3.6.1.4.1.89.88.35.4.1.4 integer read-write
VLAN for which the flow is counted.
                     rlQosOutQueueStatisticsVlanAll 1.3.6.1.4.1.89.88.35.4.1.5 truthvalue read-write
Indication for whether the VLAN is configured as range of all the VLANS
                     rlQosOutQueueStatisticsQueue 1.3.6.1.4.1.89.88.35.4.1.6 integer read-write
Queue for which the flow is counted.
                     rlQosOutQueueStatisticsQueueAll 1.3.6.1.4.1.89.88.35.4.1.7 truthvalue read-write
Indication for whether the queue is configured as range of all the Queues
                     rlQosOutQueueStatisticsDP 1.3.6.1.4.1.89.88.35.4.1.8 statisticsdptype read-write
Drop Precedence for which the flow is counted.
                     rlQosOutQueueStatisticsDPAll 1.3.6.1.4.1.89.88.35.4.1.9 truthvalue read-write
Indication for whether the DP is configured as range of all the DPs
                     rlQosOutQueueStatisticsCounterTailDropValue 1.3.6.1.4.1.89.88.35.4.1.10 counter64 read-only
The counter for tail dropped value.
                     rlQosOutQueueStatisticsCounterAllValue 1.3.6.1.4.1.89.88.35.4.1.11 counter64 read-only
The counter for all traffic value.
                     rlQosOutQueueStatisticsCntrNumOfBits 1.3.6.1.4.1.89.88.35.4.1.12 statisticscntrnumofbitstype read-only
Counter size in bits for the counter.
                     rlQosOutQueueStatisticsStatus 1.3.6.1.4.1.89.88.35.4.1.13 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
             rlQosGlobalStatisticsCntrsTable 1.3.6.1.4.1.89.88.35.5 no-access
This table specifies statistics global counters for specific rules for all ports that they are connected to
                 rlQosGlobalStatisticsCntrsEntry 1.3.6.1.4.1.89.88.35.5.1 no-access
Each entry represents global counter.
                     rlQosGlobalStatisticsCntrsType 1.3.6.1.4.1.89.88.35.5.1.1 statisticscntrtype read-only
Counter type.
                     rlQosGlobalStatisticsCntrsNumOfBits 1.3.6.1.4.1.89.88.35.5.1.2 statisticscntrnumofbitstype read-only
Counter size in bits.
                     rlQosGlobalStatisticsCntrsCounterValue 1.3.6.1.4.1.89.88.35.5.1.3 counter64 read-only
Counter value.
                     rlQosGlobalStatisticsStatus 1.3.6.1.4.1.89.88.35.5.1.4 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
             rlQosClearCounters 1.3.6.1.4.1.89.88.35.6 integer read-write
This scalar indicates to clear all the counters.
       rlQosClassifierUtilization 1.3.6.1.4.1.89.88.36
             rlQosClassifierUtilizationTable 1.3.6.1.4.1.89.88.36.1 no-access
A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.
                 rlQosClassifierUtilizationEntry 1.3.6.1.4.1.89.88.36.1.1 no-access
A Single entry containing Classifier utilization information.
                     rlQosClassifierUtilizationUnitId 1.3.6.1.4.1.89.88.36.1.1.1 unsigned32 no-access
The Unit ID of this Classifier. must be unique per entry. This is an index into the table.
                     rlQosClassifierUtilizationPercent 1.3.6.1.4.1.89.88.36.1.1.2 unsigned32 read-only
The classifier utilization percentage.
                     rlQosClassifierUtilizationRulesNumber 1.3.6.1.4.1.89.88.36.1.1.3 unsigned32 read-only
The classifier utilization number of used rules, in short rules resolution.
                     rlQosClassifierUtilizationFreeRulesNumber 1.3.6.1.4.1.89.88.36.1.1.4 unsigned32 read-only
The classifier utilization number of not used yet rules on the unit, in short rules resolution.
             rlQosClassifierUtilizationSystem 1.3.6.1.4.1.89.88.36.2 unsigned32 read-only
The system classifier utilization percentage.
             rlQosClassifierRulesNumberUtilizationSystem 1.3.6.1.4.1.89.88.36.3 unsigned32 read-only
Number of used rules per system, in short rule resolution
             rlQosClassifierFreeRulesNumUtilizationSystem 1.3.6.1.4.1.89.88.36.4 unsigned32 read-only
Number of free rules per system, in short rule resolution
             rlQosClassifierMaxRulesNumberUtilizationSystem 1.3.6.1.4.1.89.88.36.5 unsigned32 read-only
Maximum number of rules per system, in short rule resolution
       rlQosPortToProfileMappingTable 1.3.6.1.4.1.89.88.37 no-access
This table maps between port and profile
             rlQosPortToProfileMappingEntry 1.3.6.1.4.1.89.88.37.1 no-access
Each entry in this table describes mapping between port and profile
                 rlQosPort 1.3.6.1.4.1.89.88.37.1.1 integer no-access
Port number
                 rlQosProfileName 1.3.6.1.4.1.89.88.37.1.2 displaystring read-only
profile
       rlQosCPUSafeGuardEnable 1.3.6.1.4.1.89.88.38 integer read-write
This scalar enables/disables CPU Safeguard.
       rlQosPolicyClassPriorityRefTable 1.3.6.1.4.1.89.88.39 no-access
This table specifies The relationship between policy map to class map
             rlQosPolicyClassPriorityRefEntry 1.3.6.1.4.1.89.88.39.1 no-access
Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer. It is also specifies the class-map priotiry in the policy-map, which set the rules order within the policy-map
                 rlQosPolicyClassPriorityRefPriority 1.3.6.1.4.1.89.88.39.1.1 integer no-access
The class-map priority within the policy-map
                 rlQosPolicyClassPriorityRefClassPointer 1.3.6.1.4.1.89.88.39.1.2 integer read-only
Class-map index Pointer
                 rlQosPolicyClassPriorityRefPolicyPointer 1.3.6.1.4.1.89.88.39.1.3 integer read-only
Policy map index Pointer
                 rlQosPolicyClassPriorityRefStatus 1.3.6.1.4.1.89.88.39.1.4 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosDenyAceStatisticsTable 1.3.6.1.4.1.89.88.42 no-access
This table holds statistics for deny ACEs.
             rlQosDenyAceStatisticsEntry 1.3.6.1.4.1.89.88.42.1 no-access
Each entry in this table holds number of hits for deny ACEs attached to specific Interface.
                 rlQosDenyAceStatisticsIfIndex 1.3.6.1.4.1.89.88.42.1.1 integer no-access
Interface Index.
                 rlQosDenyAceStatisticsIfCounter 1.3.6.1.4.1.89.88.42.1.2 integer read-only
Number of hits on deny ACEs for this interface.
       rlQosDenyAceStatisticsOtherFlowCounter 1.3.6.1.4.1.89.88.43 integer read-only
Number of hits on deny ACEs for 'Other'-type flow.
       rlQosDenyAceStatisticsClearIfCounters 1.3.6.1.4.1.89.88.44 interfaceindexorzero read-write
Keeps ifIndex a port or trunk or vlan that its hit counters should be reset. If the value is 0 then all interfaces counters must be reset.
       rlQosDenyAceStatisticsClearOtherFlowCounter 1.3.6.1.4.1.89.88.45 integer read-write
This scalar indicates clearing 'Other'-type flow counter operation.
       rlQosModeGlobalCfgTable 1.3.6.1.4.1.89.88.46 no-access
This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.
             rlQosModeGlobalCfgEntry 1.3.6.1.4.1.89.88.46.1 no-access
This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist.
                 rlQosGlobalIndex 1.3.6.1.4.1.89.88.46.1.1 integer no-access
Entry index - currenly only one entry can exist, indexes hard coded with value '1'.
                 rlQosGlobalQoSMode 1.3.6.1.4.1.89.88.46.1.2 qosglobalmode read-write
This field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.
                 rlQosBasicGlobalTrustMode 1.3.6.1.4.1.89.88.46.1.3 qostrustmode read-write
This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode.
                 rlQosAdvcGlobalTrustMode 1.3.6.1.4.1.89.88.46.1.4 qostrustmode read-write
This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode.
                 rlQoSPortTrustAdvancedMode 1.3.6.1.4.1.89.88.46.1.5 truthvalue read-write
This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.
                 rlQosDscpMutationEnable 1.3.6.1.4.1.89.88.46.1.6 truthvalue read-write
This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true.
                 rlQosModeGlobalCfgStatus 1.3.6.1.4.1.89.88.46.1.7 rowstatus read-write
This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.
       rlQosClassMapCounterTable 1.3.6.1.4.1.89.88.47 no-access
The table is used to show statistics for ACL applied on an interface.
             rlQosClassMapCounterEntry 1.3.6.1.4.1.89.88.47.1 no-access
This entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is set to zero upon reading its value.
                 rlQosClassMapCounterValue 1.3.6.1.4.1.89.88.47.1.2 counter64 read-only
This field returns the current value of the class map counter.
       rlQosApplicationTrapIdTable 1.3.6.1.4.1.89.88.48 no-access
The read only table is used to get the trapId assisated to application wants to use the trap action in the class map table
             rlQosApplicationTrapIdEntry 1.3.6.1.4.1.89.88.48.1 no-access
This entry holds the trapId for application using the trap action in the class map table.
                 rlQosApplicationName 1.3.6.1.4.1.89.88.48.1.1 displaystring no-access
This field represents the application name and traffic type.
                 rlQosApplicationTrapId 1.3.6.1.4.1.89.88.48.1.2 integer read-only
This field defines the trap id to be use in the class map entry.
       rlQoSApplicationDefaultAction 1.3.6.1.4.1.89.88.49 rlqosapplicationdefaultactiontype read-write
This scalar specifies application-specific default action
       rlQosLogInputInterfacesAceMatchedTable 1.3.6.1.4.1.89.88.50 no-access
This table holds a list and of ACE matched log-input option interfaces.
             rlQosLogInputInterfacesAceMatchedEntry 1.3.6.1.4.1.89.88.50.1 no-access
This table holds only one entry of port list and vlan list.
                 rlQosLogInputInterfacesAceMatchedIndex 1.3.6.1.4.1.89.88.50.1.1 integer no-access
An index is entrie's sequence.
                 rlQosLogInputInterfacesAceMatchedPorts 1.3.6.1.4.1.89.88.50.1.2 portlist read-only
the matched log-input ACEs port list
                 rlQosLogInputInterfacesAceMatchedVlanList1to1024 1.3.6.1.4.1.89.88.50.1.3 vlanlist1 read-only
the matched log-input ACEs vlan list from 1 to 1024.
                 rlQosLogInputInterfacesAceMatchedVlanList1025to2048 1.3.6.1.4.1.89.88.50.1.4 vlanlist2 read-only
the matched log-input ACEs vlan list from 1025 to 2048.
                 rlQosLogInputInterfacesAceMatchedVlanList2049to3072 1.3.6.1.4.1.89.88.50.1.5 vlanlist3 read-only
the matched log-input ACEs vlan list from 2049 to 3072.
                 rlQosLogInputInterfacesAceMatchedVlanList3073to4094 1.3.6.1.4.1.89.88.50.1.6 vlanlist4 read-only
the matched log-input ACEs vlan list from 3073 to 4094.