RADLAN-Physicaldescription-old-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-Physicaldescription-old-MIB
Download as:   
SNMPv2-CONF, IF-MIB, RADLAN-DEVICEPARAMS-MIB, SNMPv2-SMI, RADLAN-MIB, ENTITY-SENSOR-MIB, MAU-MIB, RADLAN-HWENVIROMENT, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     rlStackUnitRemoved 1.3.6.1.4.1.89.0.186
Trap indicating that a unit was removed from the stack.
     rlStackConfigChangedRingChain 1.3.6.1.4.1.89.0.187
Trap indicating that the configuration of the stack has changed. - from ring to chain - from chain to ring.
     rlStackBackupUnitRemoved 1.3.6.1.4.1.89.0.188
Trap indicating that the backup unit was removed from the stack.
     rlStackMasterSwitchover 1.3.6.1.4.1.89.0.189
Trap indicating that a new master was elected. The old maste is the backup now.
     rlStackUnitDifferentSwVersion 1.3.6.1.4.1.89.0.190
Trap indicating that the new unit added to the stack has different software version than the master.
     rlStackDuplicateUnitNotJoin 1.3.6.1.4.1.89.0.191
Trap indicating that a new unit with duplicated unit id was added to the stack - but it will not join the stack.
     rlStackLinkChange 1.3.6.1.4.1.89.0.195
Trap indicating that Link has change in one of the Stacking Ports.
 rlPhysicalDescription 1.3.6.1.4.1.89.53
The private MIB module definition for physical device configuration.
       rlPhdMibVersion 1.3.6.1.4.1.89.53.1 integer read-only
MIB's version, the current version is 3. 1: original version 2: a. new tables rlPhdModuleHotSwapTable rlPhdStackOrderTable b. new scalars rlPhdStackReorder rlPhdNumberOfUnits rlPhdMaxNumberOfUnits 3: a. new field rlPhdModuleRole of rlPhdModuleTable b. new scalars rlPhdForceMasterUnit 4: a. new fields rlPhdModuleConnect1 and rlPhdModuleConnect2 of rlPhdModuleTable. 5: a. Prefix rlPhD were replaced by prefix rlPhd b. fields rlPhdModuleConnect1 and rlPhdModuleConnect2 are moved from rlPhdModuleTable to rlPhdStackTable. c. new fiels rlPhdStackSofrwareVer, rlPhdStackProductID and rlPhdStackMacAddr of rlPhdStackTable. d. new scalars rlPhdStackReloadUnit e. new scalars rlPhdStackOrderTopUnit rlPhdStackOrderBottomUnit rlPhdStackOrderPermutation
       rlPhdModuleTable 1.3.6.1.4.1.89.53.2 no-access
For each module (board) there is an entry describing it in this module
           rlPhdModuleEntry 1.3.6.1.4.1.89.53.2.1 no-access
A entry of this table specifies a module (board)
               rlPhdModuleStackUnit 1.3.6.1.4.1.89.53.2.1.1 integer read-only
The number of the stack unit
               rlPhdModuleIndex 1.3.6.1.4.1.89.53.2.1.2 integer read-only
The number of the module in its stack unit
               rlPhdModuleType 1.3.6.1.4.1.89.53.2.1.3 integer read-only
The index for each module type
               rlPhdModuleStartingPort 1.3.6.1.4.1.89.53.2.1.4 integer read-only
The minimal number of the port residing on this module.
               rlPhdModuleNumberOfPorts 1.3.6.1.4.1.89.53.2.1.5 integer read-only
The number of ports residing on this module.
               rlPhdModuleRow 1.3.6.1.4.1.89.53.2.1.6 integer read-only
On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this module resides within the chassis of its stack unit.
               rlPhdModuleColumn 1.3.6.1.4.1.89.53.2.1.7 integer read-only
On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this module resides within the chassis of its stack unit.
               rlPhdModuleRole 1.3.6.1.4.1.89.53.2.1.8 integer read-only
The module role in the stack. Enumeration: 'backup': 3, 'master': 2, 'slave': 4, 'standalone': 1.
       rlPhdPortsTable 1.3.6.1.4.1.89.53.3 no-access
Lists the physical or physical-related attributes of ports
           rlPhdPortsEntry 1.3.6.1.4.1.89.53.3.1 no-access
For each port, a entry describing attributes which are either physical or are derived from the features of the device hardware
               rlPhdPortsIfIndex 1.3.6.1.4.1.89.53.3.1.1 integer read-only
The L2 interface number associated with this port.
               rlPhdPortsIfIndexName 1.3.6.1.4.1.89.53.3.1.2 displaystring read-only
The L2 interface number associated with this port, in string format based on the overall hardware architecture of the device (i.e., for monolithic devices just numbers, devices composed of modules (boards, cards) or stackable devices composed of monolithic units in form - , stackable devices in which each unit is composed of modules - -
               rlPhdPortsMediaType 1.3.6.1.4.1.89.53.3.1.3 integer read-only
The media type of this port. Enumeration: 'copper': 1, 'combo': 3, 'optic-fiber': 2.
               rlPhdPortsStackUnit 1.3.6.1.4.1.89.53.3.1.4 integer read-only
The number of the slot to which this port belongs.
               rlPhdPortsModuleNumber 1.3.6.1.4.1.89.53.3.1.5 integer read-only
The number of the stack unit to which this port resides in.
               rlPhdPortsRow 1.3.6.1.4.1.89.53.3.1.6 integer read-only
On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this port resides within its module.
               rlPhdPortsColumn 1.3.6.1.4.1.89.53.3.1.7 integer read-only
On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this this port resides within its module.
               rlPhdConnectorType 1.3.6.1.4.1.89.53.3.1.8 jacktype read-only
Type of connector.
               rlPhdPortHaul 1.3.6.1.4.1.89.53.3.1.9 integer read-only
Distance supported by this port. Enumeration: 'not-relevant': 1, 'long': 3, 'short': 2.
       rlPhdStackTable 1.3.6.1.4.1.89.53.4 no-access
For each stack unit there is an entry describing it in this table
           rlPhdStackEntry 1.3.6.1.4.1.89.53.4.1 no-access
A entry of this table specifies a stack unit
               rlPhdStackUnit 1.3.6.1.4.1.89.53.4.1.1 integer read-only
The stack unit described by this entry.
               rlPhdStackType 1.3.6.1.4.1.89.53.4.1.2 integer read-only
The type of the stack unit described by this entry: 1 - box 3202 2 - box LG 3 - bcm 4 - prestera
               rlPhdStackConnect1 1.3.6.1.4.1.89.53.4.1.3 integer read-only
The unit number connected to the Hyper GLink left side connection - 0 means not connected; other integer indicates the unit number.
               rlPhdStackConnect2 1.3.6.1.4.1.89.53.4.1.4 integer read-only
The unit number connected to the Hyper GLink right side connection - 0 means not connected; other integer indicates the unit number.
               rlPhdStackSofrwareVer 1.3.6.1.4.1.89.53.4.1.5 displaystring read-only
The Software version of the unit.
               rlPhdStackProductID 1.3.6.1.4.1.89.53.4.1.6 displaystring read-only
The Product ID of the unit.
               rlPhdStackMacAddr 1.3.6.1.4.1.89.53.4.1.7 physaddress read-only
The physical (MAC) address of the unit.
       rlPhdModuleHotSwapTable 1.3.6.1.4.1.89.53.5 no-access
For each module (board) there is an entry describing its Hot Swap status
           rlPhdModuleHotSwapEntry 1.3.6.1.4.1.89.53.5.1 no-access
A entry of this table specifies a module (board) Hot Swap status
               rlPhdModuleHotSwapAdminStatus 1.3.6.1.4.1.89.53.5.1.1 integer read-write
The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present. Enumeration: 'on': 1, 'off': 2.
               rlPhdModuleHotSwapOperStatus 1.3.6.1.4.1.89.53.5.1.2 integer read-only
The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present. Enumeration: 'on': 1, 'off': 2.
       rlPhdStackOrderTable 1.3.6.1.4.1.89.53.6 no-access
This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If the stack units order was never configured, the order will be the same as in the rlPhdStackTable.
           rlPhdStackOrderEntry 1.3.6.1.4.1.89.53.6.1 no-access
A entry of this table specifies a stack unit in the position desired by the user
               rlPhdStackOrderCurrentUnitPosition 1.3.6.1.4.1.89.53.6.1.1 integer no-access
The current stack unit position.
               rlPhdStackOrderDesiredUnitPosition 1.3.6.1.4.1.89.53.6.1.2 integer read-write
The desired stack unit position. Note that setting this MIB object will take effect only after setting the rlPhdStackReorder MIB object below. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same.
               rlPhdStackOrderUnitIndex 1.3.6.1.4.1.89.53.6.1.3 integer no-access
This is the original unit index, i.e. has the same value as rlPhdStackUnit above.
               rlPhdStackOrderUnitType 1.3.6.1.4.1.89.53.6.1.4 integer read-only
The type of the stack unit described by this entry. It has the same value as rlPhdStackType above. This information is duplicated here only for easier retrieval by the device manager.
       rlPhdStackReorder 1.3.6.1.4.1.89.53.7 integer read-write
Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same. Enumeration: 'reorder': 1.
       rlPhdNumberOfUnits 1.3.6.1.4.1.89.53.8 integer read-only
Shows the current number of units in the stack.
       rlPhdMaxNumberOfUnits 1.3.6.1.4.1.89.53.9 integer read-only
Shows the maximum number of units in the stack.
       rlPhdForceMasterUnit 1.3.6.1.4.1.89.53.10 integer read-write
Force unit to be master.
       rlPhdStackFixedUnit 1.3.6.1.4.1.89.53.11 integer read-write
Determine which unit will be on bottom/top of list on Show-List command(see .
       rlPhdStackFixedUnitLocation 1.3.6.1.4.1.89.53.12 integer read-write
Determine the bottom/top object in the stack table. Enumeration: 'top': 2, 'bottom': 1.
       rlPhdStackReloadUnit 1.3.6.1.4.1.89.53.13 integer read-write
Reset a specific unit.
       rlPhdUnitGenParamTable 1.3.6.1.4.1.89.53.14 no-access
For each module (board) there is an entry describing it in this module
             rlPhdUnitGenParamEntry 1.3.6.1.4.1.89.53.14.1 no-access
A entry of this table specifies a module (board)
                 rlPhdUnitGenParamStackUnit 1.3.6.1.4.1.89.53.14.1.1 integer read-only
The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
                 rlPhdUnitGenParamSoftwareVersion 1.3.6.1.4.1.89.53.14.1.2 displaystring read-only
Serial number of the product.
                 rlPhdUnitGenParamFirmwareVersion 1.3.6.1.4.1.89.53.14.1.3 displaystring read-only
Serial number of the product.
                 rlPhdUnitGenParamHardwareVersion 1.3.6.1.4.1.89.53.14.1.4 displaystring read-only
Serial number of the product.
                 rlPhdUnitGenParamSerialNum 1.3.6.1.4.1.89.53.14.1.5 displaystring read-write
Serial number of the product.
                 rlPhdUnitGenParamAssetTag 1.3.6.1.4.1.89.53.14.1.6 displaystring read-write
Serial number of the product.
                 rlPhdUnitGenParamServiceTag 1.3.6.1.4.1.89.53.14.1.7 displaystring read-only
Asset tag of the product.
                 rlPhdUnitGenParamSoftwareDate 1.3.6.1.4.1.89.53.14.1.8 displaystring read-only
Date of product's software.
                 rlPhdUnitGenParamFirmwareDate 1.3.6.1.4.1.89.53.14.1.9 displaystring read-only
Date of product's firmware.
                 rlPhdUnitGenParamManufacturer 1.3.6.1.4.1.89.53.14.1.10 displaystring read-only
Product's Manufacturer.
                 rlPhdUnitGenParamModelName 1.3.6.1.4.1.89.53.14.1.11 displaystring read-only
Model Name.
                 rlPhdUnitGenParamMd5ChksumBoot 1.3.6.1.4.1.89.53.14.1.12 displaystring read-only
MD5 Checksum for Boot
                 rlPhdUnitGenParamMd5ChksumImage1 1.3.6.1.4.1.89.53.14.1.13 displaystring read-only
MD5 Checksum for Image 1
                 rlPhdUnitGenParamMd5ChksumImage2 1.3.6.1.4.1.89.53.14.1.14 displaystring read-only
MD5 Checksum for Image 2
                 rlPhdUnitGenParamCpldVersion 1.3.6.1.4.1.89.53.14.1.15 displaystring read-only
CPLD version of the product.
       rlPhdUnitEnvParamTable 1.3.6.1.4.1.89.53.15 no-access
For each module (board) there is an entry describing it in this module
             rlPhdUnitEnvParamEntry 1.3.6.1.4.1.89.53.15.1 no-access
A entry of this table specifies a module (board)
                 rlPhdUnitEnvParamStackUnit 1.3.6.1.4.1.89.53.15.1.1 integer read-only
The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
                 rlPhdUnitEnvParamMainPSStatus 1.3.6.1.4.1.89.53.15.1.2 rlenvmonstate read-only
The mandatory state of the main PS being instrumented.
                 rlPhdUnitEnvParamRedundantPSStatus 1.3.6.1.4.1.89.53.15.1.3 rlenvmonstate read-only
The mandatory state of the redundant PS being instrumented.
                 rlPhdUnitEnvParamFan1Status 1.3.6.1.4.1.89.53.15.1.4 rlenvmonstate read-only
The mandatory state of the FAN 1 being instrumented.
                 rlPhdUnitEnvParamFan2Status 1.3.6.1.4.1.89.53.15.1.5 rlenvmonstate read-only
The mandatory state of the FAN 2 being instrumented.
                 rlPhdUnitEnvParamFan3Status 1.3.6.1.4.1.89.53.15.1.6 rlenvmonstate read-only
The mandatory state of the FAN 3 being instrumented.
                 rlPhdUnitEnvParamFan4Status 1.3.6.1.4.1.89.53.15.1.7 rlenvmonstate read-only
The mandatory state of the FAN 4 being instrumented.
                 rlPhdUnitEnvParamFan5Status 1.3.6.1.4.1.89.53.15.1.8 rlenvmonstate read-only
The mandatory state of the FAN 5 being instrumented.
                 rlPhdUnitEnvParamTempSensorValue 1.3.6.1.4.1.89.53.15.1.9 entitysensorvalue read-only
Current value for the Sensor being instrumented.
                 rlPhdUnitEnvParamTempSensorStatus 1.3.6.1.4.1.89.53.15.1.10 entitysensorstatus read-only
Status value for the Sensor being instrumented.
                 rlPhdUnitEnvParamUpTime 1.3.6.1.4.1.89.53.15.1.11 timeticks read-only
Up time of the unit in 100th of second (sec/100).
                 rlPhdUnitEnvParamTempSensor2Value 1.3.6.1.4.1.89.53.15.1.12 entitysensorvalue read-only
Current value for the Sensor2 being instrumented.
                 rlPhdUnitEnvParamTempSensor2Status 1.3.6.1.4.1.89.53.15.1.13 entitysensorstatus read-only
Status value for the Sensor2 being instrumented.
                 rlPhdUnitEnvParamTempSensor3Value 1.3.6.1.4.1.89.53.15.1.14 entitysensorvalue read-only
Current value for the Sensor3 being instrumented.
                 rlPhdUnitEnvParamTempSensor3Status 1.3.6.1.4.1.89.53.15.1.15 entitysensorstatus read-only
Status value for the Sensor3 being instrumented.
                 rlPhdUnitEnvParamTempSensor4Value 1.3.6.1.4.1.89.53.15.1.16 entitysensorvalue read-only
Current value for the Sensor4 being instrumented.
                 rlPhdUnitEnvParamTempSensor4Status 1.3.6.1.4.1.89.53.15.1.17 entitysensorstatus read-only
Status value for the Sensor4 being instrumented.
                 rlPhdUnitEnvParamTempSensor5Value 1.3.6.1.4.1.89.53.15.1.18 entitysensorvalue read-only
Current value for the Sensor5 being instrumented.
                 rlPhdUnitEnvParamTempSensor5Status 1.3.6.1.4.1.89.53.15.1.19 entitysensorstatus read-only
Status value for the Sensor5 being instrumented.
       rlPhdStackOrderTopUnit 1.3.6.1.4.1.89.53.16 integer read-write
This scalar mib holds the Top unit for the stack order command
       rlPhdStackOrderBottomUnit 1.3.6.1.4.1.89.53.17 integer read-write
This scalar mib holds the Bottom unit for the stack order command
       rlPhdStackOrderPermutation 1.3.6.1.4.1.89.53.18 octet string read-write
This scalar mib holds stack permutation
       rlPhdNumberOfPoeUnits 1.3.6.1.4.1.89.53.19 integer read-only
Shows the current number of poe units in the stack.
       rlPhdPoeTable 1.3.6.1.4.1.89.53.20 no-access
For each module (board) there is an entry describing it in this module
             rlPhdPoeEntry 1.3.6.1.4.1.89.53.20.1 no-access
A entry of this table specifies a module (board)
                 rlPhdPoeStackUnit 1.3.6.1.4.1.89.53.20.1.1 integer read-only
The stack unit to which this module belongs.
                 rlPhdPoePresent 1.3.6.1.4.1.89.53.20.1.2 integer read-only
The present state of the PoE module. The no(1) state indicates that the PoE module is not present. The yes{2) state indicates that the PoE module is present. Enumeration: 'yes': 2, 'no': 1.
       rlPhdPhyLedStackUnit 1.3.6.1.4.1.89.53.21 integer read-write
This scalar mib holds the unit number for the stack light command
       rlPhdPhyLedTimeout 1.3.6.1.4.1.89.53.22 integer read-write
This scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to normal state.
       rlCascadeTable 1.3.6.1.4.1.89.53.23 no-access
For each cascaded port for stacking unit there is an entry describing it in this table
             rlCascadeEntry 1.3.6.1.4.1.89.53.23.1 no-access
An entry of this table specifies a cascaded link information in a unit
                 rlCascadeNeighborIfIndex 1.3.6.1.4.1.89.53.23.1.1 interfaceindexorzero read-only
The ifIndex of a stacking port in the neighbor unit - 0 means not connected; other integer indicates the IfIndex.
                 rlCascadeNeighborUnit 1.3.6.1.4.1.89.53.23.1.2 integer read-only
The unit number of the neighbor unit - 0 means not connected; other integer indicates the unit number.
                 rlCascadeTrunkId 1.3.6.1.4.1.89.53.23.1.3 integer read-only
The id of the trunk, the stacking port is member, zero if the port is not member of trunk.
                 rlCascadeUnitId 1.3.6.1.4.1.89.53.23.1.4 integer read-only
The unit number matching the current ifIndex
       rlCascadeAfterResetTable 1.3.6.1.4.1.89.53.24 no-access
For each cascaded port for stacking unit there is an entry describing it in this table after reset
             rlCascadeAfterResetEntry 1.3.6.1.4.1.89.53.24.1 no-access
A entry of this table specifies a cascaded port information in a unit after reset
                 rlCascadeIfIndexAfterReset 1.3.6.1.4.1.89.53.24.1.1 interfaceindex read-only
The ifIndex of a stacking port after reset.
                 rlCascadeTrunkIdAfterReset 1.3.6.1.4.1.89.53.24.1.2 integer read-write
The Id of the trunk, the stacking port will be member after reset, zero if the port is not member of trunk.
                 rlCascadeRowStatus 1.3.6.1.4.1.89.53.24.1.3 rowstatus read-only
This object indicates the status of this entry.