RADLAN-CDP-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-CDP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, RADLAN-DEVICEPARAMS-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, CISCO-TC, Q-BRIDGE-MIB, RADLAN-MIB, SNMPv2-TC, CISCO-CDP-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     rlCdpLogMismatchDuplexTrap 1.3.6.1.4.1.89.0.224
Warning trap indicating that duplex mismatch has been detected by CDP
     rlCdpLogMismatchVoiceVlanTrap 1.3.6.1.4.1.89.0.225
Warning trap indicating that voice vlan mismatch has been detected by CDP
     rlCdpLogMismatchNativeVlanTrap 1.3.6.1.4.1.89.0.226
Warning trap indicating that native vlan mismatch has been detected by CDP
 rlCdp 1.3.6.1.4.1.89.137
The private MIB module definition for CDP protocol.
         rlCdpVersionAdvertised 1.3.6.1.4.1.89.137.1 rlcdpversiontypes read-write
Specifies the verison of sent CDP packets
         rlCdpSourceInterface 1.3.6.1.4.1.89.137.2 interfaceindexorzero read-write
Specifices the CDP source-interface, which the IP address advertised into TLV is accoding to this source-interface instead of the outgoing interface. value of 0 indicates no source interface. value must belong to an ethernet port/lag
         rlCdpLogMismatchDuplexEnable 1.3.6.1.4.1.89.137.3 portlist read-write
Enable logging messages when detecting mishmatch between advertised and received duplex mode. To enable loging on specific interface set the corresponing bit.
         rlCdpCountersTable 1.3.6.1.4.1.89.137.4 no-access
This table contains all cdp counter values, indexed by conter name
             rlCdpCountersEntry 1.3.6.1.4.1.89.137.4.1 no-access
The row definition for this table.
                 rlCdpCountersName 1.3.6.1.4.1.89.137.4.1.1 rlcdpcountertypes no-access
counter name used as key for counters table
                 rlCdpCountersValue 1.3.6.1.4.1.89.137.4.1.2 counter32 read-only
the value of the counter name specisifed by rlCdpCountersName, unsuppo will have no entry in the tab.
         rlCdpCountersClear 1.3.6.1.4.1.89.137.5 truthvalue read-write
By setting the MIB to True, all error and traffic counters are set to zero.
         rlCdpCacheClear 1.3.6.1.4.1.89.137.6 truthvalue read-write
By setting the MIB to True, all entries from the cdp cache table is deleted.
         rlCdpVoiceVlanId 1.3.6.1.4.1.89.137.7 integer read-write
voice vlan Id, used as the Appliance Vlan-Id TLV
         rlCdpCacheTable 1.3.6.1.4.1.89.137.8 no-access
The (conceptual) table contains externtion for the cdpCache table. indexed by cdpCacheEntry.
             rlCdpCacheEntry 1.3.6.1.4.1.89.137.8.1 no-access
The row definition for this table.
                 rlCdpCacheVersionExt 1.3.6.1.4.1.89.137.8.1.1 displaystring read-only
This field contains the extention of the cdpCacheVersion field in the cdpCache table. In case the neighbour advertised the SW TLV as a string with length larger than 160, this field contains the chacters from place 160 and on. Zero-length strings indicates no Version field (TLV) was reported in the most recent CDP message, or it was smaller than 160 chars
                 rlCdpCacheTimeToLive 1.3.6.1.4.1.89.137.8.1.2 integer read-only
This field indicates the time remains in seconds till the entry should be expried.
                 rlCdpCacheCdpVersion 1.3.6.1.4.1.89.137.8.1.3 rlcdpversiontypes read-only
This field indicates the cdp version that was reported in the most recent CDP message.
         rlCdpPduAction 1.3.6.1.4.1.89.137.9 rlcdppduactiontypes read-write
Defines CDP packets handling when CDP is globally disabled.
         rlCdpLogMismatchVoiceVlanEnable 1.3.6.1.4.1.89.137.10 portlist read-write
Enable logging messages when detecting mishmatch between advertised and received voice VLAN. To enable logging on specific interface set the corresponing bit.
         rlCdpLogMismatchNativeVlanEnable 1.3.6.1.4.1.89.137.11 portlist read-write
Enable logging messages when detecting mishmatch between advertised and received native VLAN. To enable loging on specific interface set the corresponing bit.
         rlCdpSecondaryCacheTable 1.3.6.1.4.1.89.137.12 no-access
The (conceptual) table contains partial information from cdpCache table. indexed by rlCdpSecondaryCacheEntry.
               rlCdpSecondaryCacheEntry 1.3.6.1.4.1.89.137.12.1 no-access
An entry (conceptual row) in the rlCdpSecondaryCacheTable, containing partial information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the interface, globally or when the secondary cache is cleared
                   rlCdpSecondaryCacheMacAddress 1.3.6.1.4.1.89.137.12.1.3 macaddress read-only
The MAC address of the neighbor.
                   rlCdpSecondaryCachePlatform 1.3.6.1.4.1.89.137.12.1.4 displaystring read-only
The Device's Hardware Platform prefix, as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message.
                   rlCdpSecondaryCacheCapabilities 1.3.6.1.4.1.89.137.12.1.5 octet string read-only
The Device's Functional Capabilities as reported in the most recent CDP message.
                   rlCdpSecondaryCacheVoiceVlanID 1.3.6.1.4.1.89.137.12.1.6 unsigned32 read-only
The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message.
                   rlCdpSecondaryCacheTimeToLive 1.3.6.1.4.1.89.137.12.1.7 integer read-only
This field indicates the number of seconds till the entry is expried.
                   rlCdpSecondaryCachePowerAvailable 1.3.6.1.4.1.89.137.12.1.8 unsigned32 read-only
The remote device's available power, as reported in the most recent CDP message. A value of 0xFFFFFFFF indicates that no Power Available TLV was reported in the most recently received CDP message.
                   rlCdpSecondaryCachePowerConsumption 1.3.6.1.4.1.89.137.12.1.9 unsigned32 read-only
The remote device's consumed power, as reported in the most recent CDP message. A value of 0xFFFFFFFF indicates that no Power Consumption TLV was reported in the most recently received CDP message.
                   rlCdpSecondaryCacheSparePairPoECapabilities 1.3.6.1.4.1.89.137.12.1.10 bits read-only
The remote device's Spare-Pair (4-wire) Power-Over-Ethernet negotiation capabilities. The bit 'supported(0)' indicates that the device supports Spare Pair POE. The bit 'detectionClassificationRequired(1)' indicates that the device requires detection/classification on the spare-pair. The bit 'desiredState(2)' indicates whether the PD device desires power on the spare pair. The bit 'operationalState(3)' indicates whether the PSE device supplies power on the spare pair. Bits: 'desiredState': 2, 'supported': 0, 'detectionClassificationRequired': 1, 'operationalState': 3.
                   rlCdpSecondaryCacheDeviceId 1.3.6.1.4.1.89.137.12.1.11 displaystring read-only
The remote device's Device-ID prefix, as reported in the most recent CDP message. The zero-length string indicates that no Device-ID TLV was reported in the most recent CDP message.
                   rlCdpSecondaryCachePortId 1.3.6.1.4.1.89.137.12.1.12 displaystring read-only
The remote device's Port-ID prefix, as reported in the most recent CDP message. The zero-length string indicates that no Port-ID TLV was reported in the most recent CDP message.
         rlCdpGlobalLogMismatchDuplexEnable 1.3.6.1.4.1.89.137.13 truthvalue read-write
Globally enable/disable logging messages when detecting mishmatch between advertised and received duplex mode.
         rlCdpGlobalLogMismatchVoiceVlanEnable 1.3.6.1.4.1.89.137.14 truthvalue read-write
Globally enable/disable logging messages when detecting mishmatch between advertised and received voice VLAN.
         rlCdpGlobalLogMismatchNativeVlanEnable 1.3.6.1.4.1.89.137.15 truthvalue read-write
Globally enable/disable logging messages when detecting mishmatch between advertised and received native VLAN.
         rlCdpTlvTable 1.3.6.1.4.1.89.137.16 no-access
The (conceptual) table contains the local advertised information. indexed by rlCdpTlvEntry.
               rlCdpTlvEntry 1.3.6.1.4.1.89.137.16.1 no-access
An entry (conceptual row) in the rlCdpTlvTable, containing local information advertised by CDP on one interface. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
                   rlCdpTlvIfIndex 1.3.6.1.4.1.89.137.16.1.1 unsigned32 no-access
The ifIndex value of the local interface. A value of zero is used to access TLVs which do not changed between interfaces.
                   rlCdpTlvDeviceIdFormat 1.3.6.1.4.1.89.137.16.1.2 integer read-only
An indication of the format of Device-Id contained in the corresponding instance of rlCdpTlvDeviceId. serialNumber(1) indicates that the value of rlCdpTlvDeviceId object is in the form of an ASCII string contain the device serial number. macAddress(2) indicates that the value of rlCdpTlvDeviceId object is in the form of Layer 2 MAC address. other(3) indicates that the value of rlCdpTlvDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name. Enumeration: 'macAddress': 2, 'serialNumber': 1, 'other': 3.
                   rlCdpTlvDeviceId 1.3.6.1.4.1.89.137.16.1.3 displaystring read-only
The Device-ID string as will be advertised in subsequent CDP messages.
                   rlCdpTlvAddress1Type 1.3.6.1.4.1.89.137.16.1.4 inetaddresstype read-only
The Inet address type of rlCdpTlvAddress1
                   rlCdpTlvAddress1 1.3.6.1.4.1.89.137.16.1.5 inetaddress read-only
The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress1Type had the value 'ipv4(1)', then this object would be an IPv4-address.
                   rlCdpTlvAddress2Type 1.3.6.1.4.1.89.137.16.1.6 inetaddresstype read-only
The Inet address type of rlCdpTlvAddress2
                   rlCdpTlvAddress2 1.3.6.1.4.1.89.137.16.1.7 inetaddress read-only
The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress2Type had the value 'ipv6(2)', then this object would be an IPv6-address.
                   rlCdpTlvAddress3Type 1.3.6.1.4.1.89.137.16.1.8 inetaddresstype read-only
The Inet address type of rlCdpTlvAddress3
                   rlCdpTlvAddress3 1.3.6.1.4.1.89.137.16.1.9 inetaddress read-only
The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress3Type had the value 'ipv6(2)', then this object would be an IPv6-address.
                   rlCdpTlvPortId 1.3.6.1.4.1.89.137.16.1.10 displaystring read-only
The Port-ID string as will be advertised in subsequent CDP messages from this interface. This will typically be the value of the ifName object (e.g., 'Ethernet0').
                   rlCdpTlvCapabilities 1.3.6.1.4.1.89.137.16.1.11 octet string read-only
The Device's Functional Capabilities as will be advertised in subsequent CDP messages. For latest set of specific values, see the latest version of the CDP specification.
                   rlCdpTlvVersion 1.3.6.1.4.1.89.137.16.1.12 displaystring read-only
The Version string as will be advertised in subsequent CDP messages.
                   rlCdpTlvPlatform 1.3.6.1.4.1.89.137.16.1.13 displaystring read-only
The Device's Hardware Platform as will be advertised in subsequent CDP messages.
                   rlCdpTlvNativeVLAN 1.3.6.1.4.1.89.137.16.1.14 unsigned32 read-only
The local device's interface's native VLAN, as will be advertised in subsequent CDP messages.
                   rlCdpTlvDuplex 1.3.6.1.4.1.89.137.16.1.15 integer read-only
The local device's interface's duplex mode, as will be advertised in subsequent CDP messages. Enumeration: 'unknown': 1, 'fullduplex': 3, 'halfduplex': 2.
                   rlCdpTlvApplianceID 1.3.6.1.4.1.89.137.16.1.16 unsigned32 read-only
The local device's Appliance ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subsequent CDP messages.
                   rlCdpTlvApplianceVlanID 1.3.6.1.4.1.89.137.16.1.17 unsigned32 read-only
The local device's VoIP VLAN ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subsequent CDP messages.
                   rlCdpTlvExtendedTrust 1.3.6.1.4.1.89.137.16.1.18 integer read-only
The local device's interface's extended trust mode, as will be advertised in subsequent CDP messages. A value of zero indicates the absence of extended trust. Enumeration: 'untrusted': 0, 'trusted': 1.
                   rlCdpTlvCosForUntrustedPorts 1.3.6.1.4.1.89.137.16.1.19 unsigned32 read-only
The COS value with which all packets received on an untrusted port should be marked by a simple switching device which cannot itself classify individual packets. This TLV only has any meaning if corresponding instance of rlCdpTlvExtendedTrust indicates the absence of extended trust.
                   rlCdpTlvPowerAvailableRequestId 1.3.6.1.4.1.89.137.16.1.20 unsigned32 read-only
The Power Available TLV Request-ID field echoes the Request-ID field last received in a Power Requested TLV. It is 0 if no Power Requested TLV has been received since the interface last transitioned to ifOperState == Up.
                   rlCdpTlvPowerAvailablePowerManagementId 1.3.6.1.4.1.89.137.16.1.21 unsigned32 read-only
The Power Available TLV Power-Management-ID field.
                   rlCdpTlvPowerAvailable 1.3.6.1.4.1.89.137.16.1.22 unsigned32 read-only
The Power Available TLV Available-Power field indicates the number of milliwatts of power available to powered devices at the time this object is instatiated. A value of 0xFFFFFFFF indicates that the Power Available TLV is not advertised.
                   rlCdpTlvPowerAvailableManagementPowerLevel 1.3.6.1.4.1.89.137.16.1.23 unsigned32 read-only
The Power Available TLV Management-Power-Level field indicates the number of milliwatts representing the supplier's request to the powered device for its Power Consumption TLV. A value of 0xFFFFFFFF indicates the local device has no preference.
                   rlCdpTlvSysName 1.3.6.1.4.1.89.137.16.1.24 displaystring read-only
The sysName MIB as will be advertised in subsequent CDP messages.
                   rlCdpTlvPowerConsumption 1.3.6.1.4.1.89.137.16.1.25 unsigned32 read-only
The value of Power Consumption TLV indicates the maximum amount of power, in milliwatts, expected to be obtained and consumed from the interface over which the CDP packet is sent. A value of 0xFFFFFFFF indicates the TLV is not advertised.
                   rlCdpTlvPowerRequestedRequestId 1.3.6.1.4.1.89.137.16.1.26 unsigned32 read-only
The Power Requested TLV Request-ID field. A value of zero indicates that the Power Requested TLV is not advertised.
                   rlCdpTlvPowerRequestedPowerManagementId 1.3.6.1.4.1.89.137.16.1.27 unsigned32 read-only
The Power Requested TLV Power-Management-ID field echoes the Management- Power-ID field in the last received Power Available TLV, or to 0, if no Power Available TLV has been received.
                   rlCdpTlvSparePairPoECapabilities 1.3.6.1.4.1.89.137.16.1.28 bits read-only
The capabilities advertised in the Spare-Pair POE TLV. The bit 'supported(0)' indicates that the device supports Spare Pair POE. The bit 'detectionClassificationRequired(1)' indicates that the device requires detection/classification on the spare-pair. The bit 'desiredState(2)' indicates whether the PD device desires power on the spare pair. The bit 'operationalState(3)' indicates whether the PSE device supplies power on the spare pair. Bits: 'desiredState': 2, 'supported': 0, 'detectionClassificationRequired': 1, 'operationalState': 3.
         rlCdpAdvertiseApplianceTlv 1.3.6.1.4.1.89.137.17 truthvalue read-write
By setting the MIB to True Appliance VLAN-ID TLV may be advertised. A value of False will prevent this TLV from being advertised.
         rlCdpValidateMandatoryTlvs 1.3.6.1.4.1.89.137.18 truthvalue read-write
By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated. Incoming CDP frames without any of the TLVs will be dropped. A value of false indicates that only the Device ID TLV (0x0001) is mandatory. Frames containing Device ID TLV will be processed, regardless of whether other TLVs are present or not.
         rlCdpInterfaceCountersTable 1.3.6.1.4.1.89.137.19 no-access
This table contains all CDP counter values, indexed by interface id.
               rlCdpInterfaceCountersEntry 1.3.6.1.4.1.89.137.19.1 no-access
The row definition for this table.
                   rlCdpInterfaceId 1.3.6.1.4.1.89.137.19.1.1 interfaceindex no-access
Interface id, used as index for interface counters table.
                   rlCdpInterfaceTotalInputPackets 1.3.6.1.4.1.89.137.19.1.2 counter32 read-only
Num of received packets on rlCdpInterfaceId
                   rlCdpInterfaceV1InputPackets 1.3.6.1.4.1.89.137.19.1.3 counter32 read-only
Num of v1 received packets on rlCdpInterfaceId
                   rlCdpInterfaceV2InputPackets 1.3.6.1.4.1.89.137.19.1.4 counter32 read-only
Num of v2 received packets on rlCdpInterfaceId
                   rlCdpInterfaceTotalOutputPackets 1.3.6.1.4.1.89.137.19.1.5 counter32 read-only
Num of sent packets from rlCdpInterfaceId
                   rlCdpInterfaceV1OutputPackets 1.3.6.1.4.1.89.137.19.1.6 counter32 read-only
Num of v1 sent packets from rlCdpInterfaceId
                   rlCdpInterfaceV2OutputPackets 1.3.6.1.4.1.89.137.19.1.7 counter32 read-only
Num of v2 sent packets from rlCdpInterfaceId
                   rlCdpInterfaceIllegalChksum 1.3.6.1.4.1.89.137.19.1.8 counter32 read-only
Num of received packets with illegal CDP checksum.
                   rlCdpInterfaceErrorPackets 1.3.6.1.4.1.89.137.19.1.9 counter32 read-only
specifies the number of received CDP packets with other error (duplicated TLVs, illegal TLVs, etc.)
                   rlCdpInterfaceMaxNeighborsExceededInMainCache 1.3.6.1.4.1.89.137.19.1.10 counter32 read-only
specifies the number of times a CDP neighbor could not be stored in the main cache.
                   rlCdpInterfaceMaxNeighborsExceededInSecondaryCache 1.3.6.1.4.1.89.137.19.1.11 counter32 read-only
specifies the number of times a CDP neighbor could not be stored in the secondary cache.
         rlCdpInterfaceCountersClear 1.3.6.1.4.1.89.137.20 interfaceindexorzero read-write
By setting the scalar to a interface id , all error and traffic counters of this interface are set to zero. To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF
         rlCdpTlvPowerRequestTable 1.3.6.1.4.1.89.137.21 no-access
The (conceptual) table contains the local advertised requested power levels in Power Requested TLV. indexed by rlCdpTlvPowerRequestEntry.
               rlCdpTlvPowerRequestEntry 1.3.6.1.4.1.89.137.21.1 no-access
An entry (conceptual row) in the rlCdpTlvPowerRequestTable, containing locally requested power levels advertised by CDP on one interface. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
                   rlCdpTlvPowerRequestPowerLevelIndex 1.3.6.1.4.1.89.137.21.1.2 unsigned32 no-access
An index to the list of Requested-Power-Level in Power Requested TLV.
                   rlCdpTlvPowerRequestPowerLevel 1.3.6.1.4.1.89.137.21.1.3 unsigned32 read-only
A possible value of the Power Consumption TLV, in milliwatts
         rlCdpSecondaryCacheAddressTable 1.3.6.1.4.1.89.137.22 no-access
The (conceptual) table containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message and stored in the secondary cache.
               rlCdpSecondaryCacheAddressEntry 1.3.6.1.4.1.89.137.22.1 no-access
An entry (conceptual row) in the rlCdpSecondaryCacheAddressTable, containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message and stored in the secondary cache. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
                   rlCdpSecondaryCacheAddressIndex 1.3.6.1.4.1.89.137.22.1.3 integer no-access
The index of the address entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair.
                   rlCdpSecondaryCacheAddressType 1.3.6.1.4.1.89.137.22.1.4 cisconetworkprotocol read-only
An indication of the type of address contained in the corresponding instance of rlCdpSecondaryCacheAddress
                   rlCdpSecondaryCacheAddress 1.3.6.1.4.1.89.137.22.1.5 cisconetworkaddress read-only
A network-layer address of the device as reported in the most recent CDP message's Address TLV. For example, if the the corresponding instance of rlCdpSecondaryCacheAddressType had the value 'ip(1)', then this object would be an IPv4-address.
         rlCdpSecondaryCacheRequestedPowerTable 1.3.6.1.4.1.89.137.23 no-access
The (conceptual) table containing the list of requested power levels by a remote device, as reported in the Power Requested TLV of the most recently received CDP message and stored in the secondary cache.
               rlCdpSecondaryCacheRequestedPowerEntry 1.3.6.1.4.1.89.137.23.1 no-access
An entry (conceptual row) in the rlCdpSecondaryCacheRequestedPowerTable, containing the list of requested power levels by a remote device, as reported in the Power Requested TLV of the most recently received CDP message and stored in the secondary cache. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
                   rlCdpSecondaryCacheRequestedPowerIndex 1.3.6.1.4.1.89.137.23.1.3 integer no-access
The index of the requested power level entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair.
                   rlCdpSecondaryCacheRequestedPowerLevel 1.3.6.1.4.1.89.137.23.1.4 unsigned32 read-only
A requested power level in the Power Requested TLV, in milliwatts.