PTPBASE-MIB: View SNMP OID List / Download MIB
VENDOR: INTERNET-STANDARD
| Home | MIB: PTPBASE-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| ptpbaseMIB | 1.3.6.1.2.1.241 |
The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType |
||
| ptpbaseMIBNotifs | 1.3.6.1.2.1.241.0 | |||
| ptpbaseMIBObjects | 1.3.6.1.2.1.241.1 | |||
| ptpbaseMIBSystemInfo | 1.3.6.1.2.1.241.1.1 | |||
| ptpbaseSystemTable | 1.3.6.1.2.1.241.1.1.1 | no-access |
Table of count information about the PTP system for all domains. |
|
| 1.3.6.1.2.1.241.1.1.1.1 | no-access |
A table entry that contains count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes them. |
||
| ptpDomainIndex | 1.3.6.1.2.1.241.1.1.1.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved |
| ptpInstanceIndex | 1.3.6.1.2.1.241.1.1.1.1.2 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this domain. |
| ptpDomainClockPortsTotal | 1.3.6.1.2.1.241.1.1.1.1.3 | gauge32 | read-only |
This object specifies the total number of clock ports configured within a domain in the system. |
| ptpbaseSystemDomainTable | 1.3.6.1.2.1.241.1.1.2 | no-access |
Table of information about the PTP system for all clock modes -- ordinary, boundary, or transparent. |
|
| 1.3.6.1.2.1.241.1.1.2.1 | no-access |
A table entry that contains information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node. |
||
| ptpbaseSystemDomainClockTypeIndex | 1.3.6.1.2.1.241.1.1.2.1.1 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseSystemDomainTotals | 1.3.6.1.2.1.241.1.1.2.1.2 | unsigned32 | read-only |
This object specifies the total number of PTP domains for this particular clock type configured in this node. |
| ptpbaseSystemProfile | 1.3.6.1.2.1.241.1.1.3 | ptpclockprofiletype | read-only |
This object specifies the PTP profile implemented on the system. |
| ptpbaseMIBClockInfo | 1.3.6.1.2.1.241.1.2 | |||
| ptpbaseClockCurrentDSTable | 1.3.6.1.2.1.241.1.2.1 | no-access |
Table of information about the PTP clock currentDS for all domains. |
|
| 1.3.6.1.2.1.241.1.2.1.1 | no-access |
A table entry that contains information about a single PTP clock currentDS for a domain. |
||
| ptpbaseClockCurrentDSDomainIndex | 1.3.6.1.2.1.241.1.2.1.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockCurrentDSClockTypeIndex | 1.3.6.1.2.1.241.1.2.1.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockCurrentDSInstanceIndex | 1.3.6.1.2.1.241.1.2.1.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockCurrentDSStepsRemoved | 1.3.6.1.2.1.241.1.2.1.1.4 | unsigned32 | read-only |
The current clock dataset stepsRemoved value. This object specifies the distance measured by the number of boundary clocks between the local clock and the foreign master as indicated in the stepsRemoved field of Announce messages. |
| ptpbaseClockCurrentDSOffsetFromMaster | 1.3.6.1.2.1.241.1.2.1.1.5 | ptpclocktimeinterval | read-only |
This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock. |
| ptpbaseClockCurrentDSMeanPathDelay | 1.3.6.1.2.1.241.1.2.1.1.6 | ptpclocktimeinterval | read-only |
This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism. |
| ptpbaseClockParentDSTable | 1.3.6.1.2.1.241.1.2.2 | no-access |
Table of information about the PTP clock parentDS for all domains. |
|
| 1.3.6.1.2.1.241.1.2.2.1 | no-access |
A table entry that contains information about a single PTP clock parentDS for a domain. |
||
| ptpbaseClockParentDSDomainIndex | 1.3.6.1.2.1.241.1.2.2.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockParentDSClockTypeIndex | 1.3.6.1.2.1.241.1.2.2.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockParentDSInstanceIndex | 1.3.6.1.2.1.241.1.2.2.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockParentDSParentPortIdentity | 1.3.6.1.2.1.241.1.2.2.1.4 | octet string | read-only |
This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock. |
| ptpbaseClockParentDSParentStats | 1.3.6.1.2.1.241.1.2.2.1.5 | truthvalue | read-only |
This object specifies the parentDS ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data. |
| ptpbaseClockParentDSOffset | 1.3.6.1.2.1.241.1.2.2.1.6 | ptpclockintervalbase2 | read-only |
This object specifies the parentDS ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock. |
| ptpbaseClockParentDSClockPhChRate | 1.3.6.1.2.1.241.1.2.2.1.7 | integer32 | read-only |
This object specifies the clock's parentDS ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock. |
| ptpbaseClockParentDSGMClockIdentity | 1.3.6.1.2.1.241.1.2.2.1.8 | ptpclockidentity | read-only |
This object specifies the parentDS grandmaster clock identity. |
| ptpbaseClockParentDSGMClockPriority1 | 1.3.6.1.2.1.241.1.2.2.1.9 | unsigned32 | read-only |
This object specifies the parentDS grandmaster clock priority1. |
| ptpbaseClockParentDSGMClockPriority2 | 1.3.6.1.2.1.241.1.2.2.1.10 | unsigned32 | read-only |
This object specifies the parentDS grandmaster clock priority2. |
| ptpbaseClockParentDSGMClockQualityClass | 1.3.6.1.2.1.241.1.2.2.1.11 | ptpclockqualityclasstype | read-only |
This object specifies the parentDS grandmaster clock quality class. |
| ptpbaseClockParentDSGMClockQualityAccuracy | 1.3.6.1.2.1.241.1.2.2.1.12 | ptpclockqualityaccuracytype | read-only |
This object specifies the parentDS grandmaster clock quality accuracy. |
| ptpbaseClockParentDSGMClockQualityOffset | 1.3.6.1.2.1.241.1.2.2.1.13 | unsigned32 | read-only |
This object specifies the parentDS grandmaster clock quality offset. |
| ptpbaseClockDefaultDSTable | 1.3.6.1.2.1.241.1.2.3 | no-access |
Table of information about the PTP clock defaultDS for all domains. |
|
| 1.3.6.1.2.1.241.1.2.3.1 | no-access |
A table entry that contains information about a single PTP clock defaultDS for a domain. |
||
| ptpbaseClockDefaultDSDomainIndex | 1.3.6.1.2.1.241.1.2.3.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockDefaultDSClockTypeIndex | 1.3.6.1.2.1.241.1.2.3.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockDefaultDSInstanceIndex | 1.3.6.1.2.1.241.1.2.3.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockDefaultDSTwoStepFlag | 1.3.6.1.2.1.241.1.2.3.1.4 | truthvalue | read-only |
This object specifies whether the two-step process is used. |
| ptpbaseClockDefaultDSClockIdentity | 1.3.6.1.2.1.241.1.2.3.1.5 | ptpclockidentity | read-only |
This object specifies the defaultDS clockIdentity member. |
| ptpbaseClockDefaultDSPriority1 | 1.3.6.1.2.1.241.1.2.3.1.6 | unsigned32 | read-only |
This object specifies the defaultDS priority1 member. |
| ptpbaseClockDefaultDSPriority2 | 1.3.6.1.2.1.241.1.2.3.1.7 | unsigned32 | read-only |
This object specifies the defaultDS priority2 member. |
| ptpbaseClockDefaultDSSlaveOnly | 1.3.6.1.2.1.241.1.2.3.1.8 | truthvalue | read-only |
This object specifies whether the SlaveOnly flag is set. |
| ptpbaseClockDefaultDSQualityClass | 1.3.6.1.2.1.241.1.2.3.1.9 | ptpclockqualityclasstype | read-only |
This object specifies the defaultDS Quality Class. |
| ptpbaseClockDefaultDSQualityAccuracy | 1.3.6.1.2.1.241.1.2.3.1.10 | ptpclockqualityaccuracytype | read-only |
This object specifies the defaultDS Quality Accuracy. |
| ptpbaseClockDefaultDSQualityOffset | 1.3.6.1.2.1.241.1.2.3.1.11 | integer32 | read-only |
This object specifies the defaultDS Quality offset. |
| ptpbaseClockRunningTable | 1.3.6.1.2.1.241.1.2.4 | no-access |
Table of information about the PTP clock running datasets for all domains. |
|
| 1.3.6.1.2.1.241.1.2.4.1 | no-access |
A table entry that contains information about a single PTP clock running dataset for a domain. |
||
| ptpbaseClockRunningDomainIndex | 1.3.6.1.2.1.241.1.2.4.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockRunningClockTypeIndex | 1.3.6.1.2.1.241.1.2.4.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockRunningInstanceIndex | 1.3.6.1.2.1.241.1.2.4.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockRunningState | 1.3.6.1.2.1.241.1.2.4.1.4 | ptpclockstatetype | read-only |
This object specifies the clock state returned by a PTP engine. |
| ptpbaseClockRunningPacketsSent | 1.3.6.1.2.1.241.1.2.4.1.5 | counter64 | read-only |
This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous. |
| ptpbaseClockRunningPacketsReceived | 1.3.6.1.2.1.241.1.2.4.1.6 | counter64 | read-only |
This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous. |
| ptpbaseClockTimePropertiesDSTable | 1.3.6.1.2.1.241.1.2.5 | no-access |
Table of information about the PTP clock timePropertiesDS for all domains. |
|
| 1.3.6.1.2.1.241.1.2.5.1 | no-access |
A table entry that contains information about a single PTP clock timePropertiesDS for a domain. |
||
| ptpbaseClockTimePropertiesDSDomainIndex | 1.3.6.1.2.1.241.1.2.5.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockTimePropertiesDSClockTypeIndex | 1.3.6.1.2.1.241.1.2.5.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockTimePropertiesDSInstanceIndex | 1.3.6.1.2.1.241.1.2.5.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid | 1.3.6.1.2.1.241.1.2.5.1.4 | truthvalue | read-only |
This object specifies the timePropertiesDS value of whether the current UTC offset is valid. |
| ptpbaseClockTimePropertiesDSCurrentUTCOffset | 1.3.6.1.2.1.241.1.2.5.1.5 | integer32 | read-only |
This object specifies the timePropertiesDS value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise, the value has no meaning. The value shall be in units of seconds. |
| ptpbaseClockTimePropertiesDSLeap59 | 1.3.6.1.2.1.241.1.2.5.1.6 | truthvalue | read-only |
This object specifies the Leap59 value in the clock currentDS. |
| ptpbaseClockTimePropertiesDSLeap61 | 1.3.6.1.2.1.241.1.2.5.1.7 | truthvalue | read-only |
This object specifies the Leap61 value in the clock currentDS. |
| ptpbaseClockTimePropertiesDSTimeTraceable | 1.3.6.1.2.1.241.1.2.5.1.8 | truthvalue | read-only |
This object specifies the Time Traceable value in the clock currentDS. |
| ptpbaseClockTimePropertiesDSFreqTraceable | 1.3.6.1.2.1.241.1.2.5.1.9 | truthvalue | read-only |
This object specifies the Frequency Traceable value in the clock currentDS. |
| ptpbaseClockTimePropertiesDSPTPTimescale | 1.3.6.1.2.1.241.1.2.5.1.10 | truthvalue | read-only |
This object specifies the PTP Timescale value in the clock currentDS. |
| ptpbaseClockTimePropertiesDSSource | 1.3.6.1.2.1.241.1.2.5.1.11 | ptpclocktimesourcetype | read-only |
This object specifies the Timesource value in the clock currentDS. |
| ptpbaseClockTransDefaultDSTable | 1.3.6.1.2.1.241.1.2.6 | no-access |
Table of information about the PTP transparentClockDefaultDS for all domains. |
|
| 1.3.6.1.2.1.241.1.2.6.1 | no-access |
A table entry that contains information about a single PTP transparent clock defaultDS for a domain. |
||
| ptpbaseClockTransDefaultDSDomainIndex | 1.3.6.1.2.1.241.1.2.6.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockTransDefaultDSInstanceIndex | 1.3.6.1.2.1.241.1.2.6.1.2 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockTransDefaultDSClockIdentity | 1.3.6.1.2.1.241.1.2.6.1.3 | ptpclockidentity | read-only |
This object specifies the value of the clockIdentity attribute of the local clock. |
| ptpbaseClockTransDefaultDSNumOfPorts | 1.3.6.1.2.1.241.1.2.6.1.4 | counter32 | read-only |
This object specifies the number of PTP ports of the device. These counters are discontinuous. |
| ptpbaseClockTransDefaultDSDelay | 1.3.6.1.2.1.241.1.2.6.1.5 | ptpclockmechanismtype | read-only |
This object, if the transparent clock is an end-to-end transparent clock, has the value of e2e; if the transparent clock is a peer-to-peer transparent clock, the value is p2p. |
| ptpbaseClockTransDefaultDSPrimaryDomain | 1.3.6.1.2.1.241.1.2.6.1.6 | ptpclockdomaintype | read-only |
This object specifies the value of the primary syntonization domain. The initialization value is 0. |
| ptpbaseClockPortTable | 1.3.6.1.2.1.241.1.2.7 | no-access |
Table of information about the clock ports for a particular domain. |
|
| 1.3.6.1.2.1.241.1.2.7.1 | no-access |
A table entry that contains information about a single clock port. |
||
| ptpbaseClockPortDomainIndex | 1.3.6.1.2.1.241.1.2.7.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockPortClockTypeIndex | 1.3.6.1.2.1.241.1.2.7.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockPortClockInstanceIndex | 1.3.6.1.2.1.241.1.2.7.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockPortTablePortNumberIndex | 1.3.6.1.2.1.241.1.2.7.1.4 | ptpclockportnumber | no-access |
This object specifies the PTP portNumber for this port. |
| ptpbaseClockPortName | 1.3.6.1.2.1.241.1.2.7.1.5 | displaystring | read-only |
This object specifies the PTP clock port name configured on the node. |
| ptpbaseClockPortRole | 1.3.6.1.2.1.241.1.2.7.1.6 | ptpclockroletype | read-only |
This object describes the current role (slave/master) of the port. |
| ptpbaseClockPortSyncTwoStep | 1.3.6.1.2.1.241.1.2.7.1.7 | truthvalue | read-only |
This object specifies that two-step clock operation between the PTP master and slave device is enabled. |
| ptpbaseClockPortCurrentPeerAddressType | 1.3.6.1.2.1.241.1.2.7.1.8 | autonomoustype | read-only |
This object specifies the current peer's network address type used for PTP communication. |
| ptpbaseClockPortCurrentPeerAddress | 1.3.6.1.2.1.241.1.2.7.1.9 | ptpclockporttransporttypeaddress | read-only |
This object specifies the current peer's network address used for PTP communication. |
| ptpbaseClockPortNumOfAssociatedPorts | 1.3.6.1.2.1.241.1.2.7.1.10 | gauge32 | read-only |
This object specifies the following: For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered). |
| ptpbaseClockPortDSTable | 1.3.6.1.2.1.241.1.2.8 | no-access |
Table of information about the clock's portDS for a particular domain. |
|
| 1.3.6.1.2.1.241.1.2.8.1 | no-access |
A table entry that contains portDS information for a single clock port. |
||
| ptpbaseClockPortDSDomainIndex | 1.3.6.1.2.1.241.1.2.8.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockPortDSClockTypeIndex | 1.3.6.1.2.1.241.1.2.8.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockPortDSClockInstanceIndex | 1.3.6.1.2.1.241.1.2.8.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockPortDSPortNumberIndex | 1.3.6.1.2.1.241.1.2.8.1.4 | ptpclockportnumber | no-access |
This object specifies the PTP portNumber associated with this PTP port. |
| ptpbaseClockPortDSName | 1.3.6.1.2.1.241.1.2.8.1.5 | displaystring | read-only |
This object specifies the PTP clock portDS name. |
| ptpbaseClockPortDSPortIdentity | 1.3.6.1.2.1.241.1.2.8.1.6 | octet string | read-only |
This object specifies the PTP clock port Identity. |
| ptpbaseClockPortDSlogAnnouncementInterval | 1.3.6.1.2.1.241.1.2.8.1.7 | ptpclockintervalbase2 | read-only |
This object specifies the Announce message transmission interval associated with this clock port. |
| ptpbaseClockPortDSAnnounceRctTimeout | 1.3.6.1.2.1.241.1.2.8.1.8 | integer32 | read-only |
This object specifies the Announce receipt timeout associated with this clock port. |
| ptpbaseClockPortDSlogSyncInterval | 1.3.6.1.2.1.241.1.2.8.1.9 | ptpclockintervalbase2 | read-only |
This object specifies the Sync message transmission interval. |
| ptpbaseClockPortDSMinDelayReqInterval | 1.3.6.1.2.1.241.1.2.8.1.10 | integer32 | read-only |
This object specifies the Delay_Req message transmission interval. |
| ptpbaseClockPortDSPeerDelayReqInterval | 1.3.6.1.2.1.241.1.2.8.1.11 | integer32 | read-only |
This object specifies the Pdelay_Req message transmission interval. |
| ptpbaseClockPortDSDelayMech | 1.3.6.1.2.1.241.1.2.8.1.12 | ptpclockmechanismtype | read-only |
This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value is e2e; if the clock is a peer to-peer clock, the value is p2p. |
| ptpbaseClockPortDSPeerMeanPathDelay | 1.3.6.1.2.1.241.1.2.8.1.13 | ptpclocktimeinterval | read-only |
This object specifies the peer meanPathDelay. |
| ptpbaseClockPortDSGrantDuration | 1.3.6.1.2.1.241.1.2.8.1.14 | unsigned32 | read-only |
This object specifies the grant duration allocated by the master. |
| ptpbaseClockPortDSPTPVersion | 1.3.6.1.2.1.241.1.2.8.1.15 | unsigned32 | read-only |
This object specifies the PTP version being used. |
| ptpbaseClockPortRunningTable | 1.3.6.1.2.1.241.1.2.9 | no-access |
Table of information about the clock ports running datasets for a particular domain. |
|
| 1.3.6.1.2.1.241.1.2.9.1 | no-access |
A table entry that contains running dataset information about a single clock port. |
||
| ptpbaseClockPortRunningDomainIndex | 1.3.6.1.2.1.241.1.2.9.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockPortRunningClockTypeIndex | 1.3.6.1.2.1.241.1.2.9.1.2 | ptpclocktype | no-access |
This object specifies the clock type as defined in the textual convention description. |
| ptpbaseClockPortRunningClockInstanceIndex | 1.3.6.1.2.1.241.1.2.9.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockPortRunningPortNumberIndex | 1.3.6.1.2.1.241.1.2.9.1.4 | ptpclockportnumber | no-access |
This object specifies the PTP portNumber associated with this clock port. |
| ptpbaseClockPortRunningName | 1.3.6.1.2.1.241.1.2.9.1.5 | displaystring | read-only |
This object specifies the PTP clock port name. |
| ptpbaseClockPortRunningState | 1.3.6.1.2.1.241.1.2.9.1.6 | ptpclockportstate | read-only |
This object specifies the port state returned by PTP engine: initializing faulty disabled listening preMaster master passive uncalibrated slave |
| ptpbaseClockPortRunningRole | 1.3.6.1.2.1.241.1.2.9.1.7 | ptpclockroletype | read-only |
This object specifies the Clock Role. |
| ptpbaseClockPortRunningInterfaceIndex | 1.3.6.1.2.1.241.1.2.9.1.8 | interfaceindexorzero | read-only |
This object specifies the interface on the node being used by the PTP clock for PTP communication. |
| ptpbaseClockPortRunningTransport | 1.3.6.1.2.1.241.1.2.9.1.9 | autonomoustype | read-only |
This object specifies the transport protocol being used for PTP communication (the mapping used). |
| ptpbaseClockPortRunningEncapsulationType | 1.3.6.1.2.1.241.1.2.9.1.10 | autonomoustype | read-only |
This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN or Pseudowire encapsulation) for the PTP messages. |
| ptpbaseClockPortRunningTxMode | 1.3.6.1.2.1.241.1.2.9.1.11 | ptpclocktxmodetype | read-only |
This object specifies the clock transmission mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel |
| ptpbaseClockPortRunningRxMode | 1.3.6.1.2.1.241.1.2.9.1.12 | ptpclocktxmodetype | read-only |
This object specifies the clock receive mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel |
| ptpbaseClockPortRunningPacketsReceived | 1.3.6.1.2.1.241.1.2.9.1.13 | counter64 | read-only |
This object specifies the packets received on the clock port (cumulative). These counters are discontinuous. |
| ptpbaseClockPortRunningPacketsSent | 1.3.6.1.2.1.241.1.2.9.1.14 | counter64 | read-only |
This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous. |
| ptpbaseClockPortTransDSTable | 1.3.6.1.2.1.241.1.2.10 | no-access |
Table of information about the transparentClockPortDS for a particular domain. |
|
| 1.3.6.1.2.1.241.1.2.10.1 | no-access |
A table entry that contains clock port transparent dataset information about a single clock port. |
||
| ptpbaseClockPortTransDSDomainIndex | 1.3.6.1.2.1.241.1.2.10.1.1 | ptpclockdomaintype | no-access |
This object specifies the domain number used to create a logical group of PTP devices. |
| ptpbaseClockPortTransDSInstanceIndex | 1.3.6.1.2.1.241.1.2.10.1.2 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpbaseClockPortTransDSPortNumberIndex | 1.3.6.1.2.1.241.1.2.10.1.3 | ptpclockportnumber | no-access |
This object specifies the PTP portNumber associated with this port. |
| ptpbaseClockPortTransDSPortIdentity | 1.3.6.1.2.1.241.1.2.10.1.4 | ptpclockidentity | read-only |
This object specifies the value of the PortIdentity attribute of the local port. |
| ptpbaseClockPortTransDSlogMinPdelayReqInt | 1.3.6.1.2.1.241.1.2.10.1.5 | ptpclockintervalbase2 | read-only |
This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval. |
| ptpbaseClockPortTransDSFaultyFlag | 1.3.6.1.2.1.241.1.2.10.1.6 | truthvalue | read-only |
This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally. |
| ptpbaseClockPortTransDSPeerMeanPathDelay | 1.3.6.1.2.1.241.1.2.10.1.7 | ptpclocktimeinterval | read-only |
This object specifies, if the delayMechanism used is p2p, the value of the estimate of the current one-way propagation delay, i.e., |
| ptpbaseClockPortAssociateTable | 1.3.6.1.2.1.241.1.2.11 | no-access |
Table of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario. |
|
| 1.3.6.1.2.1.241.1.2.11.1 | no-access |
A table entry that contains information about a single associated port for the given clock port. |
||
| ptpClockPortCurrentDomainIndex | 1.3.6.1.2.1.241.1.2.11.1.1 | ptpclockdomaintype | no-access |
This object specifies the given port's domain number. |
| ptpClockPortCurrentClockTypeIndex | 1.3.6.1.2.1.241.1.2.11.1.2 | ptpclocktype | no-access |
This object specifies the given port's clock type. |
| ptpClockPortCurrentClockInstanceIndex | 1.3.6.1.2.1.241.1.2.11.1.3 | ptpclockinstancetype | no-access |
This object specifies the instance of the clock for this clock type in the given domain. |
| ptpClockPortCurrentPortNumberIndex | 1.3.6.1.2.1.241.1.2.11.1.4 | ptpclockportnumber | no-access |
This object specifies the PTP portNumber for the given port. |
| ptpbaseClockPortAssociatePortIndex | 1.3.6.1.2.1.241.1.2.11.1.5 | unsigned32 | no-access |
This object specifies the associated port's serial number in the current port's context. |
| ptpbaseClockPortAssociateAddressType | 1.3.6.1.2.1.241.1.2.11.1.6 | autonomoustype | read-only |
This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING. |
| ptpbaseClockPortAssociateAddress | 1.3.6.1.2.1.241.1.2.11.1.7 | ptpclockporttransporttypeaddress | read-only |
This object specifies the peer port's network address used for PTP communication. |
| ptpbaseClockPortAssociatePacketsSent | 1.3.6.1.2.1.241.1.2.11.1.8 | counter64 | read-only |
The number of packets sent to this peer port from the current port. These counters are discontinuous. |
| ptpbaseClockPortAssociatePacketsReceived | 1.3.6.1.2.1.241.1.2.11.1.9 | counter64 | read-only |
The number of packets received from this peer port by the current port. These counters are discontinuous. |
| ptpbaseClockPortAssociateInErrors | 1.3.6.1.2.1.241.1.2.11.1.10 | counter64 | read-only |
This object specifies the input errors associated with the peer port. These counters are discontinuous. |
| ptpbaseClockPortAssociateOutErrors | 1.3.6.1.2.1.241.1.2.11.1.11 | counter64 | read-only |
This object specifies the output errors associated with the peer port. These counters are discontinuous. |
| ptpbaseWellKnownTransportTypes | 1.3.6.1.2.1.241.1.2.12 | |||
| ptpbaseTransportTypeIPversion4 | 1.3.6.1.2.1.241.1.2.12.1 |
IP version 4 |
||
| ptpbaseTransportTypeIPversion6 | 1.3.6.1.2.1.241.1.2.12.2 |
IP version 6 |
||
| ptpbaseTransportTypeEthernet | 1.3.6.1.2.1.241.1.2.12.3 |
Ethernet |
||
| ptpbaseTransportTypeDeviceNET | 1.3.6.1.2.1.241.1.2.12.4 |
Device NET |
||
| ptpbaseTransportTypeControlNET | 1.3.6.1.2.1.241.1.2.12.5 |
Control NET |
||
| ptpbaseTransportTypeIEC61158 | 1.3.6.1.2.1.241.1.2.12.6 |
IEC61158 |
||
| ptpbaseWellKnownEncapsulationTypes | 1.3.6.1.2.1.241.1.2.13 | |||
| ptpbaseEncapsulationTypeEthernet | 1.3.6.1.2.1.241.1.2.13.1 |
Ethernet Encapsulation type. |
||
| ptpbaseEncapsulationTypeVLAN | 1.3.6.1.2.1.241.1.2.13.2 |
VLAN Encapsulation type. |
||
| ptpbaseEncapsulationTypeUDPIPLSP | 1.3.6.1.2.1.241.1.2.13.3 |
UDP/IP over MPLS Encapsulation type. |
||
| ptpbaseEncapsulationTypePWUDPIPLSP | 1.3.6.1.2.1.241.1.2.13.4 |
UDP/IP Pseudowire over MPLS Encapsulation type. |
||
| ptpbaseEncapsulationTypePWEthernetLSP | 1.3.6.1.2.1.241.1.2.13.5 |
Ethernet Pseudowire over MPLS Encapsulation type. |
||
| ptpbaseMIBConformance | 1.3.6.1.2.1.241.2 | |||
| ptpbaseMIBCompliances | 1.3.6.1.2.1.241.2.1 | |||
| ptpbaseMIBCompliancesSystemInfo | 1.3.6.1.2.1.241.2.1.1 |
Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system-level information of clock devices. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
||
| ptpbaseMIBCompliancesClockInfo | 1.3.6.1.2.1.241.2.1.2 |
Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
||
| ptpbaseMIBCompliancesClockPortInfo | 1.3.6.1.2.1.241.2.1.3 |
Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-port-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
||
| ptpbaseMIBCompliancesTransparentClockInfo | 1.3.6.1.2.1.241.2.1.4 |
Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide transparent-clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
||
| ptpbaseMIBGroups | 1.3.6.1.2.1.241.2.2 | |||
| ptpbaseMIBSystemInfoGroup | 1.3.6.1.2.1.241.2.2.1 |
Group that aggregates objects describing system-wide information |
||
| ptpbaseMIBClockCurrentDSGroup | 1.3.6.1.2.1.241.2.2.2 |
Group that aggregates objects describing PTP currentDS information |
||
| ptpbaseMIBClockParentDSGroup | 1.3.6.1.2.1.241.2.2.3 |
Group that aggregates objects describing PTP parentDS information |
||
| ptpbaseMIBClockDefaultDSGroup | 1.3.6.1.2.1.241.2.2.4 |
Group that aggregates objects describing PTP defaultDS information |
||
| ptpbaseMIBClockRunningGroup | 1.3.6.1.2.1.241.2.2.5 |
Group that aggregates objects describing PTP running state information |
||
| ptpbaseMIBClockTimepropertiesGroup | 1.3.6.1.2.1.241.2.2.6 |
Group that aggregates objects describing PTP Time Properties information |
||
| ptpbaseMIBClockTranparentDSGroup | 1.3.6.1.2.1.241.2.2.7 |
Group that aggregates objects describing PTP transparentClockDefaultDS information |
||
| ptpbaseMIBClockPortGroup | 1.3.6.1.2.1.241.2.2.8 |
Group that aggregates objects describing information for a given PTP Port |
||
| ptpbaseMIBClockPortDSGroup | 1.3.6.1.2.1.241.2.2.9 |
Group that aggregates objects describing PTP portDS information |
||
| ptpbaseMIBClockPortRunningGroup | 1.3.6.1.2.1.241.2.2.10 |
Group that aggregates objects describing PTP running interface information |
||
| ptpbaseMIBClockPortTransDSGroup | 1.3.6.1.2.1.241.2.2.11 |
Group that aggregates objects describing PTP transparentClockPortDS information |
||
| ptpbaseMIBClockPortAssociateGroup | 1.3.6.1.2.1.241.2.2.12 |
Group that aggregates objects describing information on peer PTP ports for a given PTP clock port |
||