PSA-WIN-MIB: View SNMP OID List / Download MIB
VENDOR: FUJITSU LIMITED
Home | MIB: PSA-WIN-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
fujitsu | 1.3.6.1.4.1.211 | |||
products | 1.3.6.1.4.1.211.1 | |||
iaServer | 1.3.6.1.4.1.211.1.31 | |||
primequest | 1.3.6.1.4.1.211.1.31.1 | |||
partition | 1.3.6.1.4.1.211.1.31.1.2 | |||
partitionCommon | 1.3.6.1.4.1.211.1.31.1.2.100 | |||
physicalComponent | 1.3.6.1.4.1.211.1.31.1.2.100.1 | |||
logicalComponentForLinux | 1.3.6.1.4.1.211.1.31.1.2.100.2 | |||
logicalComponentForWindows | 1.3.6.1.4.1.211.1.31.1.2.100.3 | |||
winLogicalCpuInfo | 1.3.6.1.4.1.211.1.31.1.2.100.3.1 | |||
winNumOfLogicalCpus | 1.3.6.1.4.1.211.1.31.1.2.100.3.1.6 | integer | read-only |
Number of effective logical CPUs in the partition. |
winLogicalMemoryInfo | 1.3.6.1.4.1.211.1.31.1.2.100.3.2 | |||
winLgMemSize | 1.3.6.1.4.1.211.1.31.1.2.100.3.2.1 | integer | read-only |
Memory size of the partition.(unit:Mbyte) |
winLgMemSwapSize | 1.3.6.1.4.1.211.1.31.1.2.100.3.2.2 | integer | read-only |
Swap size of the partition.(unit:Mbyte) |
winNetworkInfo | 1.3.6.1.4.1.211.1.31.1.2.100.3.4 | |||
winNetworkInterfaceTable | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1 | no-access |
Table with network interface information. |
|
1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1 | no-access |
|
||
winNIIndex | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.1 | integer | read-only |
Network inteface identification number. |
winNIMACAddress | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.2 | physaddress | read-only |
The interface address of the physical layer of the network. |
winNIIPAddress | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.3 | octet string | read-only |
IP address of the network interface. |
winNIInterfaceName | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.4 | displaystring | read-only |
Network interface name.(e.g.eth0). |
winNISpeed | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.5 | integer | read-only |
Network speed.(unit:Mbit/s) |
winNISubNetMask | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.6 | octet string | read-only |
Subnet address of the network interface. |
winNINetworkType | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.7 | integer | read-only |
Network interface type. The network type definition are assigned by the IANA. |
winNIBusType | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.8 | integer | read-only |
Bus type of the network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
winNISegment | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.9 | integer | read-only |
Segment number of the network interface. |
winNIBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.10 | integer | read-only |
Bus number of the network interface. |
winNIDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.11 | integer | read-only |
Device number of the network interface. |
winNIFunction | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.12 | integer | read-only |
Function number of the network interface. |
winNIStatus | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.13 | integer | read-only |
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1. |
winNIIpPacketsIn | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.14 | counter | read-only |
|
winNIIpPacketsOut | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.15 | counter | read-only |
|
winNIDeviceName | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.16 | displaystring | read-only |
Device name of the network interface. |
winNILinkStatus | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.17 | integer | read-only |
The current link state of the interface. If 0; link status is unknown. Enumeration: 'down': 2, 'up': 1. |
winNIPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.18 | displaystring | read-only |
Identification name of Network Interface cand. |
winNIIPAddress2 | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.19 | displaystring | read-only |
IP address of the network interface. Please use this object instead of 'winNIIPAddress'. |
winNISubNetMask2 | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.20 | displaystring | read-only |
Subnet address of the network interface. Please use this object instead of 'winNISubNetMask'. |
winIPv6NetworkInterfaceTable | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2 | no-access |
Table with IPv6 network interface information. |
|
1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1 | no-access |
|
||
winIPv6NIIndex | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.1 | integer | read-only |
IPv6 Network inteface identification number. |
winIPv6NIMACAddress | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.2 | physaddress | read-only |
The interface address of the physical layer of the IPv6 network. |
winIPv6NIIPAddress | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.3 | octet string | read-only |
IPv6 address of the network interface. This object returns IPv6 address of 16 bytes binary data. |
winIPv6NIIPAddress2 | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.4 | displaystring | read-only |
IPv6 address of the network interface. This object returns IPv6 address of text string format |
winIPv6NIInterfaceName | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.5 | displaystring | read-only |
IPv6 Network interface name.(e.g.eth0). |
winIPv6NISpeed | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.6 | integer | read-only |
IPv6 Network speed.(unit:Mbit/s) |
winIPv6NIPrefix | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.7 | integer | read-only |
IPv6 network interface prefix |
winIPv6NIScope | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.8 | integer | read-only |
IPv6 network interface scope. Refer to the following definitions; value contents 0 global 16 loopback 32 link 64 site |
winIPv6NIDADStatus | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.9 | integer | read-only |
IPv6 network interface DAD Status. Refer to the following definitions; value contents 0 The DAD state is invalid 1 The DAD state is tentative 2 A duplicate IP address has been detected 3 The IP address has been deprecated 4 The IP address is the preferred address |
winIPv6NINetworkType | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.10 | integer | read-only |
IPv6 network interface type. The network type definition are assigned by the IANA. |
winIPv6NIBusType | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.11 | integer | read-only |
Bus type of the IPv6 network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
winIPv6NISegment | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.12 | integer | read-only |
Segment number of the IPv6 network interface. |
winIPv6NIBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.13 | integer | read-only |
Bus number of the IPv6 network interface. |
winIPv6NIDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.14 | integer | read-only |
Device number of the IPv6 network interface. |
winIPv6NIFunction | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.15 | integer | read-only |
Function number of the IPv6 network interface. |
winIPv6NIStatus | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.16 | integer | read-only |
The current operational state of the IPv6 interface. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1. |
winIPv6NIIpPacketsIn | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.17 | counter | read-only |
|
winIPv6NIIpPacketsOut | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.18 | counter | read-only |
|
winIPv6NIlinkStatus | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.19 | integer | read-only |
The current link state of the IPv6 interface. If 0; link status is unknown. Enumeration: 'down': 2, 'up': 1. |
winIPv6NIPhysicalID | 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.20 | displaystring | read-only |
Identification name of IPv6 network interface cand. |
winHardwareResourceInfo | 1.3.6.1.4.1.211.1.31.1.2.100.3.5 | |||
winHardwareResourceTable | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1 | no-access |
|
|
1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1 | no-access |
|
||
winHWRBusType | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.1 | integer | read-only |
Bus type of the device. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
winHWRSegment | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.2 | integer | read-only |
Segment number of the device. |
winHWRBusNumber | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.3 | integer | read-only |
Bus number of the device. |
winHWRDeviceNumber | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.4 | integer | read-only |
Device number of the device. |
winHWRFunction | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.5 | integer | read-only |
Function number of the device. |
winHWRMemArea | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.6 | displaystring | read-only |
Memory area used the device. |
winHWRIRQ | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.7 | integer | read-only |
Interrupt number used the device. |
winHWRIoPort | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.8 | displaystring | read-only |
I/O port area used the device. |
winHWRAdapterName | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.9 | displaystring | read-only |
Adapter name id of the device. |
winHWRVendor | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.10 | displaystring | read-only |
Vendor id of the device. |
winHWRClass | 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.11 | octet string | read-only |
Device classification; according to the PCI classification scheme. Byte Contents 0 BaseClass 1 SubClass 2 ProgIf |
winOperatingSystemInfo | 1.3.6.1.4.1.211.1.31.1.2.100.3.6 | |||
winOSName | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.1 | displaystring | read-only |
Operating system name that running on the partition. |
winOSVersion | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.2 | displaystring | read-only |
Operating system version that running on the partition. |
winOSRunTime | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.3 | counter | read-only |
Current partition up time.(unit:sec) |
winOSSystemTime | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.4 | displaystring | read-only |
Current date and time as visible string. |
winOSCurrentSession | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.5 | integer | read-only |
Number of current session. |
winOSAverageUsageRate | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.6 | integer | read-only |
The average system usage rate over all processors since startup.(unit:%) |
winOSServicePack | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.9 | displaystring | read-only |
Service pack. |
winOSCharactorCode | 1.3.6.1.4.1.211.1.31.1.2.100.3.6.10 | integer | read-only |
System charactor code.This value is the Code-page indentifiers. |
monitoringFunction | 1.3.6.1.4.1.211.1.31.1.2.100.4 | |||
thresholdFunction | 1.3.6.1.4.1.211.1.31.1.2.100.5 | |||
statusFunction | 1.3.6.1.4.1.211.1.31.1.2.100.6 | |||
otherFunction | 1.3.6.1.4.1.211.1.31.1.2.100.7 | |||
pxFunction | 1.3.6.1.4.1.211.1.31.1.2.100.8 |