PRVT-RING-EPS-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-RING-EPS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, PRVT-SWITCH-MIB, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtRingEpsMib 1.3.6.1.4.1.738.1.5.134
This private MIB provides capability of controlling the automatic Ring Ethernet Protection Switching (ITU-T G.8032)
         prvtRingEpsNotifications 1.3.6.1.4.1.738.1.5.134.0
             prvtRingEpsDefectAlarm 1.3.6.1.4.1.738.1.5.134.0.1
This trap will be sent by any instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsDefectFop variable in the notification.
             prvtRingEpsSwitchoverAlarm 1.3.6.1.4.1.738.1.5.134.0.2
This trap will be sent by any instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsState variable in the notification.
             prvtRingEpsSubRingDefectAlarm 1.3.6.1.4.1.738.1.5.134.0.3
This trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsDefectFop variable in the notification.
             prvtRingEpsSubRingSwitchoverAlarm 1.3.6.1.4.1.738.1.5.134.0.4
This trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsSubRingState variable in the notification.
         prvtRingEpsObjects 1.3.6.1.4.1.738.1.5.134.1
             prvtRingEpsInstances 1.3.6.1.4.1.738.1.5.134.1.1
                 prvtRingEpsInstanceTable 1.3.6.1.4.1.738.1.5.134.1.1.1 no-access
This table includes information about the ring instances defined on this node.
                     prvtRingEpsInstanceEntry 1.3.6.1.4.1.738.1.5.134.1.1.1.1 no-access
NONE
                         prvtRingEpsInstanceIndex 1.3.6.1.4.1.738.1.5.134.1.1.1.1.1 unsigned32 no-access
RAPS instance index
                         prvtRingEpsMode 1.3.6.1.4.1.738.1.5.134.1.1.1.1.2 prvtringepsmodetype read-only
Version of the protocol the instance will use
                         prvtRingEpsNodeRole 1.3.6.1.4.1.738.1.5.134.1.1.1.1.3 prvtringepsnoderoletype read-only
This variable identifies the role that the node will play inside the ring. The node can have two special roles, RPL owner or RPL neighbor, when one of its ports is designated as RPL. The ring can have a single RPL owner and a single RPL neighbor, connected between eachother via the RPL. If neither of the node ports are designated as RPL, then the node should have the role of a Simple node
                         prvtRingEpsState 1.3.6.1.4.1.738.1.5.134.1.1.1.1.4 prvtringepsstatetype read-only
This variable identifies the state of the ring node according to the standard state machine.
                         prvtRingEpsLocalCommand 1.3.6.1.4.1.738.1.5.134.1.1.1.1.5 prvtringepslocalcommandtype read-only
The user can control the ring using a set of commands allowing blocking and unblocking of ports. These commands are rapsLcManualSwitch, rapsLcForcedSwitch and rapsLcClear. The others are either read-only values or not yet defined by the standard.
                         prvtRingEpsControlVlan 1.3.6.1.4.1.738.1.5.134.1.1.1.1.6 vlanidornone read-only
The vlan ID used for RAPS & CFM traffic.
                         prvtRingEpsPort0Ifindex 1.3.6.1.4.1.738.1.5.134.1.1.1.1.7 interfaceindexorzero read-only
This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the ring as port 0.
                         prvtRingEpsPort1Ifindex 1.3.6.1.4.1.738.1.5.134.1.1.1.1.8 interfaceindexorzero read-only
This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the ring as port 1.
                         prvtRingEpsRplPort 1.3.6.1.4.1.738.1.5.134.1.1.1.1.9 prvtringepsrplporttype read-only
This object controls whether the one of the ring ports is designated as RPL for the ring or not.
                         prvtRingEpsManualSwitchPort 1.3.6.1.4.1.738.1.5.134.1.1.1.1.10 prvtringepsrplporttype read-only
The port blocked by the Manual Switch command
                         prvtRingEpsCfmMdLevel 1.3.6.1.4.1.738.1.5.134.1.1.1.1.11 dot1agcfmmdlevelornone read-only
Value of the CFM MD level where the protected domain is situated
                         prvtRingEpsPort0Mep 1.3.6.1.4.1.738.1.5.134.1.1.1.1.12 dot1agcfmmepidorzero read-only
This variable is the peer MEP ID that should send CCMs towards port 0.
                         prvtRingEpsPort1Mep 1.3.6.1.4.1.738.1.5.134.1.1.1.1.13 dot1agcfmmepidorzero read-only
This variable is the peer MEP ID that should send CCMs towards port 1.
                         prvtRingEpsRevertive 1.3.6.1.4.1.738.1.5.134.1.1.1.1.14 truthvalue read-only
This is the MI_RAPS_Revertive variable defined in the standard. It controls whether the RPL is blocked again after a failure of some ring link recovers.
                         prvtRingEpsNoVirtualChannel 1.3.6.1.4.1.738.1.5.134.1.1.1.1.15 truthvalue read-only
Node is part of a subring that doesn't use RAPS virtual channel
                         prvtRingEpsHoldOffTimer 1.3.6.1.4.1.738.1.5.134.1.1.1.1.16 unsigned32 read-only
Range is from 0 to 10 seconds in 100msec intervals
                         prvtRingEpsWaitToRestoreTimer 1.3.6.1.4.1.738.1.5.134.1.1.1.1.17 unsigned32 read-only
Range is from 1 to 12 minutes
                         prvtRingEpsGuardTimer 1.3.6.1.4.1.738.1.5.134.1.1.1.1.18 unsigned32 read-only
Range is from 10msec to 2 seconds in 10msec intervals
                         prvtRingEpsWaitToBlockTimer 1.3.6.1.4.1.738.1.5.134.1.1.1.1.19 unsigned32 read-only
Range is from 5010msec to 7 seconds in 10msec intervals. This time is actulally the Guard Timer + 5 seconds
                         prvtRingEpsDefectFop 1.3.6.1.4.1.738.1.5.134.1.1.1.1.20 prvtringepsdefecttype read-only
So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own.
                         prvtRingEpsPort0Status 1.3.6.1.4.1.738.1.5.134.1.1.1.1.21 prvtringepsportstatustype read-only
This variable reflects the state of port 0. It can be either Ok (unblocked), Blocked or Failed.
                         prvtRingEpsPort1Status 1.3.6.1.4.1.738.1.5.134.1.1.1.1.22 prvtringepsportstatustype read-only
This variable reflects the state of port 1. It can be either Ok (unblocked), Blocked or Failed.
                         prvtRingEpsPort0PeerNodeId 1.3.6.1.4.1.738.1.5.134.1.1.1.1.23 macaddress read-only
This variable reflects the Node ID from the RAPS packet received via port 0.
                         prvtRingEpsPort1PeerNodeId 1.3.6.1.4.1.738.1.5.134.1.1.1.1.24 macaddress read-only
This variable reflects the Node ID from the RAPS packet received via port 1.
                         prvtRingEpsPort0PeerCommand 1.3.6.1.4.1.738.1.5.134.1.1.1.1.25 prvtringepsremoterequesttype read-only
This variable reflects the Request/State of the RAPS packet received via port 0.
                         prvtRingEpsPort1PeerCommand 1.3.6.1.4.1.738.1.5.134.1.1.1.1.26 prvtringepsremoterequesttype read-only
This variable reflects the Request/State of the RAPS packet received via port 1.
                         prvtRingEpsPort0PeerStatus 1.3.6.1.4.1.738.1.5.134.1.1.1.1.27 prvtringepspeerstatustype read-only
This variable reflects the status field of the RAPS packet received via port 0.
                         prvtRingEpsPort1PeerStatus 1.3.6.1.4.1.738.1.5.134.1.1.1.1.28 prvtringepspeerstatustype read-only
This variable reflects the status field of the RAPS packet received via port 1.
                         prvtRingEpsOperationalStatus 1.3.6.1.4.1.738.1.5.134.1.1.1.1.29 truthvalue read-only
The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the instance the operational status will be down. Receiving CCMs from the expected peer MEPs on both ring ports will bring the operational status to up. If any needed CFM configuration is removed the operational status will go back to down
                         prvtRingEpsAdminStatus 1.3.6.1.4.1.738.1.5.134.1.1.1.1.30 truthvalue read-only
Administrative status of the instance
                         prvtRingEpsRowStatus 1.3.6.1.4.1.738.1.5.134.1.1.1.1.31 rowstatus read-only
The status of the row.
                         prvtRingEpsForcedSwitchPort 1.3.6.1.4.1.738.1.5.134.1.1.1.1.32 prvtringepsrplporttype read-only
The port blocked by the Forced Switch command
                         prvtRingEpsInstanceDescription 1.3.6.1.4.1.738.1.5.134.1.1.1.1.33 displaystring read-only
RAPS instance description.
                         prvtRingEpsRingId 1.3.6.1.4.1.738.1.5.134.1.1.1.1.34 unsigned32 read-only
The last octet of the RAPS destination MAC address is designated as Ring ID (01-19-A7-00-00-[Ring ID]). As of G.8032v2 the destination MAC address '01-19-A7-00-00-01' is used. The usage of other MAC addresses is for further study.
                         prvtRingEpsPort0MonitoringMethod 1.3.6.1.4.1.738.1.5.134.1.1.1.1.35 integer read-write
Raps monitoring methods for port 0: ccm - CCM messages and link status will be used for raps monitoring, link-status -Link status will be used for raps monitoring Enumeration: 'ccm': 1, 'link-status': 2.
                         prvtRingEpsPort1MonitoringMethod 1.3.6.1.4.1.738.1.5.134.1.1.1.1.36 integer read-write
Raps monitoring methods for port 1: ccm - CCM messages and link status will be used for raps monitoring, link-status - Link status will be used for raps monitoring Enumeration: 'ccm': 1, 'link-status': 2.
             prvtRingEpsVlans 1.3.6.1.4.1.738.1.5.134.1.2
                 prvtRingEpsVlanTable 1.3.6.1.4.1.738.1.5.134.1.2.1 no-access
This table includes information about protected vlans and the ring instances that monitor them.
                     prvtRingEpsVlanEntry 1.3.6.1.4.1.738.1.5.134.1.2.1.1 no-access
Connection between vlan IDs and the RAPS instance that monitors them
                         prvtRingEpsVlanIndex 1.3.6.1.4.1.738.1.5.134.1.2.1.1.1 unsigned32 no-access
The vlan ID.
                         prvtRingEpsInstance 1.3.6.1.4.1.738.1.5.134.1.2.1.1.2 unsigned32 read-only
RAPS instance that will monitor this vlan
                         prvtRingEpsVlanRowStatus 1.3.6.1.4.1.738.1.5.134.1.2.1.1.3 rowstatus read-only
The status of the row.
             prvtRingEpsSubRings 1.3.6.1.4.1.738.1.5.134.1.3
                 prvtRingEpsSubRingTable 1.3.6.1.4.1.738.1.5.134.1.3.1 no-access
Table containing information about the subring instances defined on this node.
                     prvtRingEpsSubRingEntry 1.3.6.1.4.1.738.1.5.134.1.3.1.1 no-access
Configuration of a subring that is interconnected to the main ring in an interconnection node
                         prvtRingEpsSubRingIndex 1.3.6.1.4.1.738.1.5.134.1.3.1.1.1 unsigned32 no-access
A subring ID
                         prvtRingEpsSubRingNodeRole 1.3.6.1.4.1.738.1.5.134.1.3.1.1.2 prvtringepsnoderoletype read-only
This variable identifies the role that the node will play inside the subring. The node can have two special roles, RPL owner or RPL neighbor, when the subring port is designated as RPL. The subring can have a single RPL owner and a single RPL neighbor, connected between eachother via the RPL. If the subring port is not designated as RPL, then the node should have the role of a Simple node
                         prvtRingEpsSubRingState 1.3.6.1.4.1.738.1.5.134.1.3.1.1.3 prvtringepsstatetype read-only
This variable identifies the state of the subring node according to the standard state machine.
                         prvtRingEpsSubRingLocalCommand 1.3.6.1.4.1.738.1.5.134.1.3.1.1.4 prvtringepslocalcommandtype read-only
The user can control the ring using a set of commands allowing blocking and unblocking of ports. These commands are rapsLcManualSwitch, rapsLcForcedSwitch and rapsLcClear. The others are either read-only values or not yet defined by the standard.
                         prvtRingEpsSubRingPortIfindex 1.3.6.1.4.1.738.1.5.134.1.3.1.1.5 interfaceindexorzero read-only
This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the subring.
                         prvtRingEpsSubRingPortMep 1.3.6.1.4.1.738.1.5.134.1.3.1.1.6 dot1agcfmmepidorzero read-only
This variable is the peer MEP ID that should send CCMs towards the subring port.
                         prvtRingEpsSubRingRplPort 1.3.6.1.4.1.738.1.5.134.1.3.1.1.7 prvtringepsrplporttype read-only
This object controls whether the subring port is designated as RPL for the subring or not.
                         prvtRingEpsSubRingVirtualChannelVlan 1.3.6.1.4.1.738.1.5.134.1.3.1.1.8 vlanidornone read-only
The vlan ID used for Virtual Channel encapsulation
                         prvtRingEpsSubRingRevertive 1.3.6.1.4.1.738.1.5.134.1.3.1.1.9 truthvalue read-only
This is the MI_RAPS_Revertive variable defined in the standard. It controls whether the RPL is blocked again after a failure of some subring link recovers.
                         prvtRingEpsSubRingHoldOffTimer 1.3.6.1.4.1.738.1.5.134.1.3.1.1.10 unsigned32 read-only
Range is from 0 to 10 seconds in 100msec intervals
                         prvtRingEpsSubRingWaitToRestoreTimer 1.3.6.1.4.1.738.1.5.134.1.3.1.1.11 unsigned32 read-only
Range is from 1 to 12 minutes
                         prvtRingEpsSubRingGuardTimer 1.3.6.1.4.1.738.1.5.134.1.3.1.1.12 unsigned32 read-only
Range is from 10msec to 2 seconds in 10msec intervals
                         prvtRingEpsSubRingWaitToBlockTimer 1.3.6.1.4.1.738.1.5.134.1.3.1.1.13 unsigned32 read-only
Range is from 5010msec to 7 seconds in 10msec intervals. This time is actulally the Guard Timer + 5 seconds
                         prvtRingEpsSubRingDefectFop 1.3.6.1.4.1.738.1.5.134.1.3.1.1.14 prvtringepsdefecttype read-only
So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own.
                         prvtRingEpsSubRingPortStatus 1.3.6.1.4.1.738.1.5.134.1.3.1.1.15 prvtringepsportstatustype read-only
This variable reflects the state of the subring port. It can be either Ok (unblocked), Blocked or Failed.
                         prvtRingEpsSubRingPortPeerNodeId 1.3.6.1.4.1.738.1.5.134.1.3.1.1.16 macaddress read-only
This variable reflects the Node ID from the RAPS packet received via the subring port.
                         prvtRingEpsSubRingPeerCommand 1.3.6.1.4.1.738.1.5.134.1.3.1.1.17 prvtringepsremoterequesttype read-only
This variable reflects the Request/State of the RAPS packet received via the subring port.
                         prvtRingEpsSubRingPeerStatus 1.3.6.1.4.1.738.1.5.134.1.3.1.1.18 prvtringepspeerstatustype read-only
This variable reflects the status field of the RAPS packet received via the subring port.
                         prvtRingEpsSubRingVcPeerNodeId 1.3.6.1.4.1.738.1.5.134.1.3.1.1.19 macaddress read-only
This variable reflects the Node ID from the RAPS packet received via the virtual channel.
                         prvtRingEpsSubRingVcPeerCommand 1.3.6.1.4.1.738.1.5.134.1.3.1.1.20 prvtringepsremoterequesttype read-only
This variable reflects the Request/State of the RAPS packet received via the virtual channel.
                         prvtRingEpsSubRingVcPeerStatus 1.3.6.1.4.1.738.1.5.134.1.3.1.1.21 prvtringepspeerstatustype read-only
This variable reflects the status field of the RAPS packet received via the virtual channel.
                         prvtRingEpsSubRingPropagateTC 1.3.6.1.4.1.738.1.5.134.1.3.1.1.22 truthvalue read-only
This is the MI_RAPS_Propagate_TC variable mentioned in the standard. If this is enabled a flush in the subring will be followed by a flush in the main instance.
                         prvtRingEpsSubRingOperationalStatus 1.3.6.1.4.1.738.1.5.134.1.3.1.1.23 truthvalue read-only
The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the instance the operational status will be down. Receiving CCMs from the expected peer MEP on the subring port will bring the operational status to up. If any needed CFM configuration is removed the operational status will go back to down
                         prvtRingEpsSubRingAdminStatus 1.3.6.1.4.1.738.1.5.134.1.3.1.1.24 truthvalue read-only
Administrative status of the subring instance
                         prvtRingEpsSubRingRowStatus 1.3.6.1.4.1.738.1.5.134.1.3.1.1.25 rowstatus read-only
The status of the row.
                         prvtRingEpsSubRingControlVlan 1.3.6.1.4.1.738.1.5.134.1.3.1.1.26 vlanidornone read-only
The vlan ID used for RAPS & CFM traffic.
                         prvtRingEpsSubRingDescription 1.3.6.1.4.1.738.1.5.134.1.3.1.1.27 displaystring read-only
RAPS instance sub-ring description.
                         prvtRingEpsSubRingRingId 1.3.6.1.4.1.738.1.5.134.1.3.1.1.28 unsigned32 read-only
The last octet of the RAPS destination MAC address is designated as Ring ID (01-19-A7-00-00-[Ring ID]). As of G.8032v2 the destination MAC address '01-19-A7-00-00-01' is used. The usage of other MAC addresses is for further study.
                         prvtRingEpsSubRingMonitoringMethod 1.3.6.1.4.1.738.1.5.134.1.3.1.1.29 integer read-write
Raps monitoring methods for subring port: ccm - CCM messags and link status will be used for raps monitoring, link-status -Link status will be used for raps monitoring Enumeration: 'ccm': 1, 'link-status': 2.
         prvtRingEpsConformance 1.3.6.1.4.1.738.1.5.134.2
             prvtRingEpsCompliances 1.3.6.1.4.1.738.1.5.134.2.1
                 prvtRingEpsCompliance 1.3.6.1.4.1.738.1.5.134.2.1.1
The compliance statement for support of the Ring EPS MIB module.
             prvtRingEpsGroups 1.3.6.1.4.1.738.1.5.134.2.2
                 prvtRingEpsGroup 1.3.6.1.4.1.738.1.5.134.2.2.1
Objects for the RAPS instances group.
                 prvtRingEpsVlanGroup 1.3.6.1.4.1.738.1.5.134.2.2.2
Objects for the RAPS monitored vlans group.
                 prvtRingEpsSubRingGroup 1.3.6.1.4.1.738.1.5.134.2.2.3
Objects for the RAPS subring group.
                 prvtRingEpsNotificationsGroup 1.3.6.1.4.1.738.1.5.134.2.2.4
Objects for the Notifications group.