PRVT-RAPS-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-RAPS-MIB
Download as:   
SNMPv2-CONF, PRVT-QOS-MIB, IF-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtRapsMIB 1.3.6.1.4.1.738.1.7.4
The SNMP MIB module for Ring Automatic Protection Switching (G.8032).
     prvtRapsMIBNotifications 1.3.6.1.4.1.738.1.7.4.0
         prvtRapsDefectAlarm 1.3.6.1.4.1.738.1.7.4.0.1
This trap will be sent by any instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification.
         prvtRapsSwitchoverAlarm 1.3.6.1.4.1.738.1.7.4.0.2
This trap will be sent by any instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification
         prvtRapsInstSubRingDefectAlarm 1.3.6.1.4.1.738.1.7.4.0.3
This trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingOperStatus variable in the notification.
         prvtRapsInstSubRingSwitchoverAlarm 1.3.6.1.4.1.738.1.7.4.0.4
This trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingRapsState variable in the notification.
     prvtRapsMIBObjects 1.3.6.1.4.1.738.1.7.4.1
         prvtRapsInstTable 1.3.6.1.4.1.738.1.7.4.1.1 no-access
R-APS Instance table. Each entry in this table defines an instance of a Ring APS.
             prvtRapsInstEntry 1.3.6.1.4.1.738.1.7.4.1.1.1 no-access
An entry in prvtRapsInstTable.
                 prvtRapsInstIndex 1.3.6.1.4.1.738.1.7.4.1.1.1.1 prvtrapsinstindextype no-access
An arbitrary index uniquely identifying a Ring APS instance.
                 prvtRapsInstRowStatus 1.3.6.1.4.1.738.1.7.4.1.1.1.2 rowstatus read-only
The RowStatus for this R-APS instance.
                 prvtRapsInstMode 1.3.6.1.4.1.738.1.7.4.1.1.1.3 prvtrapsmodetype read-only
The G.8032 mode for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). In version 1 mode (prvtRapsInstMode equals 'version1'), ring ID (prvtRapsInstRingId) must be 1.
                 prvtRapsInstRingId 1.3.6.1.4.1.738.1.7.4.1.1.1.4 prvtrapsringidtype read-only
The Ring ID for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). In version 1 mode (prvtRapsInstMode equals 'version1'), ring ID (prvtRapsInstRingId) must be 1.
                 prvtRapsInstRole 1.3.6.1.4.1.738.1.7.4.1.1.1.5 prvtrapsroletype read-only
The role of the node for this R-APS instance. Must perform shutdown to change this object.
                 prvtRapsInstControlVlan 1.3.6.1.4.1.738.1.7.4.1.1.1.6 prvtrapsvlanidtype read-only
The control VLAN for this R-APS instance. When main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls'), this should be set equal to the ring's instance ID (prvtRapsInstIndex). This object must be set to the ID of an existing VLAN. Each R-APS instance must use a unique VLAN for the control VLAN. Must perform shutdown to change this object.
                 prvtRapsInstCfmDomainLevel 1.3.6.1.4.1.738.1.7.4.1.1.1.7 prvtrapscfmleveltype read-only
The CFM domain level for this R-APS instance. Must perform shutdown to change this object.
                 prvtRapsInstRevertiveMode 1.3.6.1.4.1.738.1.7.4.1.1.1.8 truthvalue read-only
Set to 'true' to select revertive behavior for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Non-revertive behavior is not available in version 1 mode.
                 prvtRapsInstDisableVirtChan 1.3.6.1.4.1.738.1.7.4.1.1.1.9 truthvalue read-only
Set to 'true' to select that the node is part of a sub-ring without a RAPS virtual channel. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Must be set 'false' when in version 1 mode.
                 prvtRapsInstHoldOffTimer 1.3.6.1.4.1.738.1.7.4.1.1.1.10 prvtrapsholdofftype read-only
The hold-off timer time-out value for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
                 prvtRapsInstWaitToRestoreTimer 1.3.6.1.4.1.738.1.7.4.1.1.1.11 prvtrapswaittimertype read-only
The wait-to-restore timer time-out value for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
                 prvtRapsInstGuardTimer 1.3.6.1.4.1.738.1.7.4.1.1.1.12 prvtrapsguardtimertype read-only
The guard timer time-out value for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
                 prvtRapsInstWaitToBlockTimer 1.3.6.1.4.1.738.1.7.4.1.1.1.13 prvtrapsblocktimertype read-only
The wait to block timer time-out value for this sub-ring.
                 prvtRapsInstShutdown 1.3.6.1.4.1.738.1.7.4.1.1.1.14 truthvalue read-only
Set to 'true' to de-activate this R-APS instance.
                 prvtRapsInstClear 1.3.6.1.4.1.738.1.7.4.1.1.1.15 prvtrapsactiontype read-only
Sends the Clear command to this R-APS instance.
                 prvtRapsInstOperStatus 1.3.6.1.4.1.738.1.7.4.1.1.1.16 prvtrapsinststatustype read-only
The operational status of this R-APS instance.
                 prvtRapsInstRapsState 1.3.6.1.4.1.738.1.7.4.1.1.1.17 prvtrapsstatestype read-only
The current state for this R-APS instance.
                 prvtRapsInstTopPriCmd 1.3.6.1.4.1.738.1.7.4.1.1.1.18 prvtrapstoppricmdtype read-only
The received Top Priority Request and Status value for this R-APS instance.
                 prvtRapsInstDescription 1.3.6.1.4.1.738.1.7.4.1.1.1.19 displaystring read-only
RAPS instance description.
                 prvtRapsInstControlProtocol 1.3.6.1.4.1.738.1.7.4.1.1.1.20 integer read-only
The protocol that controls the main ring. Enumeration: 'raps': 0, 'vpls': 1.
         prvtRapsInstMonVlanTable 1.3.6.1.4.1.738.1.7.4.1.2 no-access
Monitor VLAN Table Each entry in this table defines a VLAN that will be monitored. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
             prvtRapsInstMonVlanEntry 1.3.6.1.4.1.738.1.7.4.1.2.1 no-access
An entry in prvtRapsInstMonVlanTable.
                 prvtRapsInstMonVlanId 1.3.6.1.4.1.738.1.7.4.1.2.1.1 prvtrapsvlanidtype no-access
Uniquely identifies a VLAN to be monitored. This object must be the ID of an existing VLAN. Must not be the same VLAN as the control VLAN (prvtRapsInstControlVlan).
                 prvtRapsInstMonVlanRowStatus 1.3.6.1.4.1.738.1.7.4.1.2.1.2 rowstatus read-only
The RowStatus for this monitored VLAN.
         prvtRapsInstRingPortTable 1.3.6.1.4.1.738.1.7.4.1.3 no-access
R-APS Instance Ring Port Table. Each entry in this table defines a port belonging to a R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Exactly two interfaces must be defined per instance. This includes physical ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined in prvtRapsInstRingLagTable). In the case when one physical port and one LAG interface is used, the two port index values must be unique (i.e. prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)
             prvtRapsInstRingPortEntry 1.3.6.1.4.1.738.1.7.4.1.3.1 no-access
An entry in prvtRapsInstRingPortTable.
                 prvtRapsInstRingPortIndex 1.3.6.1.4.1.738.1.7.4.1.3.1.1 unsigned32 no-access
An arbitrary index uniquely identifying a physical port belonging to a R-APS instance. When a physical port and a LAG port are used in the same R-APS instance, the two ports must use unique index values (i.e. prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex).
                 prvtRapsInstRingPortRowStatus 1.3.6.1.4.1.738.1.7.4.1.3.1.2 rowstatus read-only
The RowStatus for this ring port.
                 prvtRapsInstRingPortIfIndex 1.3.6.1.4.1.738.1.7.4.1.3.1.3 interfaceindex read-only
The ifIndex of the physical port assigned to this ring port. No two ports within the same ring instance can use the same physical port.
                 prvtRapsInstRingPortMep 1.3.6.1.4.1.738.1.7.4.1.3.1.4 prvtrapsmepidtype read-only
The peer maintenance entity group end point ID that should monitor this ring port. No two ports within the same ring instance can use the same MEP ID.
                 prvtRapsInstRingPortRpl 1.3.6.1.4.1.738.1.7.4.1.3.1.5 truthvalue read-only
Set to 'true' to define this ring port as a Ring Protection Link port. Exactly one RPL port must be defined when ring role (prvtRapsInstRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
                 prvtRapsInstRingPortManSwitch 1.3.6.1.4.1.738.1.7.4.1.3.1.6 prvtrapsactiontype read-only
Send the Manual Switch command to this ring port.
                 prvtRapsInstRingPortForcedSwitch 1.3.6.1.4.1.738.1.7.4.1.3.1.7 prvtrapsactiontype read-only
Send the Forced Switch command to this ring port.
                 prvtRapsInstRingPortMonitoringMethod 1.3.6.1.4.1.738.1.7.4.1.3.1.8 prvtrapsmonitoringmethodtype read-only
Ethernet ring protection monitoring methods
         prvtRapsInstRingLagTable 1.3.6.1.4.1.738.1.7.4.1.4 no-access
R-APS Instance Ring LAG Table Each entry in this table defines a Link Aggregation Group interface belonging to a R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Exactly two interfaces must be defined per instance. This includes physical ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined in prvtRapsInstRingLagTable).
             prvtRapsInstRingLagEntry 1.3.6.1.4.1.738.1.7.4.1.4.1 no-access
An entry in prvtRapsInstRingLagTable.
                 prvtRapsInstRingLagIndex 1.3.6.1.4.1.738.1.7.4.1.4.1.1 unsigned32 no-access
An arbitrary index uniquely identifying a LAG interface belonging to a R-APS instance. When a physical port and a LAG port are used in the same R-APS instance, the two ports must use unique index values (i.e. prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex).
                 prvtRapsInstRingLagRowStatus 1.3.6.1.4.1.738.1.7.4.1.4.1.2 rowstatus read-only
The RowStatus for this LAG interface.
                 prvtRapsInstRingLagId 1.3.6.1.4.1.738.1.7.4.1.4.1.3 prvtrapslinkaggidtype read-only
The ID of a LAG interface belonging to a R-APS instance. This object must be set to the ID of an existing LAG interface. No two LAG ports within the same ring instance can use the same LAG port.
                 prvtRapsInstRingLagMep 1.3.6.1.4.1.738.1.7.4.1.4.1.4 prvtrapsmepidtype read-only
The peer maintenance entity group end point ID that should monitor this LAG interface. No two LAG ports within the same ring instance can use the same MEP ID.
                 prvtRapsInstRingLagRpl 1.3.6.1.4.1.738.1.7.4.1.4.1.5 truthvalue read-only
Set to 'true' to define this ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when ring role (prvtRapsInstRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
                 prvtRapsInstRingLagManSwitch 1.3.6.1.4.1.738.1.7.4.1.4.1.6 prvtrapsactiontype read-only
Send the Manual Switch command to this LAG interface.
                 prvtRapsInstRingLagForcedSwitch 1.3.6.1.4.1.738.1.7.4.1.4.1.7 prvtrapsactiontype read-only
Send the Forced Switch command to this LAG interface.
         prvtRapsInstPortStatusTable 1.3.6.1.4.1.738.1.7.4.1.5 no-access
R-APS Instance Port Status Table Each entry in this table gives status information concerning a particular port (physical port or LAG interface port) belonging to a R-APS instance.
             prvtRapsInstPortStatusEntry 1.3.6.1.4.1.738.1.7.4.1.5.1 no-access
An entry in prvtRapsInstPortStatusTable.
                 prvtRapsInstPortStatusIfIndex 1.3.6.1.4.1.738.1.7.4.1.5.1.1 prvtrapsifindexoragidtype no-access
Uniquely identifies a physical port (ifIndex) or a LAG port (LAG ID) belonging to a R-APS instance.
                 prvtRapsInstPortStatusLink 1.3.6.1.4.1.738.1.7.4.1.5.1.2 prvtrapslinkoperstatustype read-only
The operational status of this port.
                 prvtRapsInstPortStatusRemoteMep 1.3.6.1.4.1.738.1.7.4.1.5.1.3 prvtrapsmepidtype read-only
The maintenance entity group end point ID for the remote port connected to this port.
                 prvtRapsInstPortStatusRcvdNodeId 1.3.6.1.4.1.738.1.7.4.1.5.1.4 macaddress read-only
The MAC address of the remote R-APS device connected to this port.
                 prvtRapsInstPortStatusRcvdCmd 1.3.6.1.4.1.738.1.7.4.1.5.1.5 prvtrapsreceivedcommandtype read-only
The command received on this port.
                 prvtRapsInstPortStatusRcvdInfo 1.3.6.1.4.1.738.1.7.4.1.5.1.6 prvtrapsreceivedinfotype read-only
The info received on this port.
         prvtRapsInstSubRingTable 1.3.6.1.4.1.738.1.7.4.1.6 no-access
R-APS Instance Sub-ring Table Each entry in this table defines a sub-ring belonging to a R-APS instance. Sub-rings are not available in version 1 mode.
             prvtRapsInstSubRingEntry 1.3.6.1.4.1.738.1.7.4.1.6.1 no-access
An entry in prvtRapsInstSubRingTable.
                 prvtRapsInstSubRingIndex 1.3.6.1.4.1.738.1.7.4.1.6.1.1 prvtrapsinstindextype no-access
An arbitrary index uniquely identifying a sub-ring for this R-APS instance.
                 prvtRapsInstSubRingRowStatus 1.3.6.1.4.1.738.1.7.4.1.6.1.2 rowstatus read-only
The RowStatus for this sub-ring.
                 prvtRapsInstSubRingId 1.3.6.1.4.1.738.1.7.4.1.6.1.3 prvtrapsringidtype read-only
The ring ID for this sub-ring.
                 prvtRapsInstSubRingRole 1.3.6.1.4.1.738.1.7.4.1.6.1.4 prvtrapsroletype read-only
The role of the node inside this sub-ring. Must perform shutdown to change this object.
                 prvtRapsInstSubRingVirtChanVlan 1.3.6.1.4.1.738.1.7.4.1.6.1.5 prvtrapsvlanidtype read-only
Configures the virtual channel VLAN for this sub-ring. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Must be a VLAN from the prvtRapsInstMonVlanTable. No two sub-rings can use the same VLAN for the virtual channel VLAN.
                 prvtRapsInstSubRingRevertiveMode 1.3.6.1.4.1.738.1.7.4.1.6.1.6 truthvalue read-only
Set to 'true' to select revertive behavior for this sub-ring.
                 prvtRapsInstSubRingHoldOffTimer 1.3.6.1.4.1.738.1.7.4.1.6.1.7 prvtrapsholdofftype read-only
The hold-off timer time-out value for this sub-ring.
                 prvtRapsInstSubRingWaitTimer 1.3.6.1.4.1.738.1.7.4.1.6.1.8 prvtrapswaittimertype read-only
The wait-to-restore timer time-out value for this sub-ring.
                 prvtRapsInstSubRingGuardTimer 1.3.6.1.4.1.738.1.7.4.1.6.1.9 prvtrapsguardtimertype read-only
The guard timer time-out value for this sub-ring.
                 prvtRapsInstSubRingBlockTimer 1.3.6.1.4.1.738.1.7.4.1.6.1.10 prvtrapsblocktimertype read-only
The wait to block timer time-out value for this sub-ring.
                 prvtRapsInstSubRingPropTopChng 1.3.6.1.4.1.738.1.7.4.1.6.1.11 truthvalue read-only
Set to 'true' to enable topology change propagation for this sub-ring.
                 prvtRapsInstSubRingShutdown 1.3.6.1.4.1.738.1.7.4.1.6.1.12 truthvalue read-only
Set to 'true' to de-activate this sub-ring.
                 prvtRapsInstSubRingClear 1.3.6.1.4.1.738.1.7.4.1.6.1.13 prvtrapsactiontype read-only
Send the Clear command to this sub-ring.
                 prvtRapsInstSubRingManualSwitch 1.3.6.1.4.1.738.1.7.4.1.6.1.14 prvtrapsactiontype read-only
Send the Manual Switch command to this sub-ring.
                 prvtRapsInstSubRingForcedSwitch 1.3.6.1.4.1.738.1.7.4.1.6.1.15 prvtrapsactiontype read-only
Send the Forced Switch command to this sub-ring.
                 prvtRapsInstSubRingOperStatus 1.3.6.1.4.1.738.1.7.4.1.6.1.16 prvtrapsinststatustype read-only
The operational status of this sub-ring.
                 prvtRapsInstSubRingRapsState 1.3.6.1.4.1.738.1.7.4.1.6.1.17 prvtrapsstatestype read-only
The current state of this sub-ring.
                 prvtRapsInstSubRingTopPriCmd 1.3.6.1.4.1.738.1.7.4.1.6.1.18 prvtrapstoppricmdtype read-only
The received Top Priority Request and Status value for this sub-ring.
                 prvtRapsInstSubRingPortName 1.3.6.1.4.1.738.1.7.4.1.6.1.19 octet string read-only
The textual name of the port belonging to this sub-ring. For a physical port, the format is U/S/P. For a LAG interface, the format is agX.
                 prvtRapsInstSubRingLinkStatus 1.3.6.1.4.1.738.1.7.4.1.6.1.20 prvtrapslinkoperstatustype read-only
The operational status of the port belonging to this sub-ring.
                 prvtRapsInstSubRingRcvdNodeId 1.3.6.1.4.1.738.1.7.4.1.6.1.21 macaddress read-only
The MAC address of the remote R-APS device connected to the port belonging to this sub-ring.
                 prvtRapsInstSubRingRcvdCmd 1.3.6.1.4.1.738.1.7.4.1.6.1.22 prvtrapsreceivedcommandtype read-only
The command received on the port belonging to this sub-ring.
                 prvtRapsInstSubRingRcvdInfo 1.3.6.1.4.1.738.1.7.4.1.6.1.23 prvtrapsreceivedinfotype read-only
The info received on the port belonging to this sub-ring.
                 prvtRapsInstSubRingDescription 1.3.6.1.4.1.738.1.7.4.1.6.1.24 displaystring read-only
RAPS instance sub-ring description.
                 prvtRapsInstSubRingVcRcvdNodeId 1.3.6.1.4.1.738.1.7.4.1.6.1.25 macaddress read-only
The MAC address of the remote R-APS device connected through the virtual channel.
                 prvtRapsInstSubRingVcRcvdCmd 1.3.6.1.4.1.738.1.7.4.1.6.1.26 prvtrapsreceivedcommandtype read-only
The command received through the virtual channel belonging to this sub-ring.
                 prvtRapsInstSubRingVcRcvdInfo 1.3.6.1.4.1.738.1.7.4.1.6.1.27 prvtrapsreceivedinfotype read-only
The info received through the virtual channel belonging to this sub-ring.
                 prvtRapsInstSubRingVirtChanSvc 1.3.6.1.4.1.738.1.7.4.1.6.1.28 unsigned32 read-only
Configure the virtual channel service for this sub-ring. Only applicable when main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls'). Must be a service ID from PRVT-SERV-MIB::serviceId. No two sub-rings can use the same service ID for the virtual channel service.
                 prvtRapsInstSubRingControlVlan 1.3.6.1.4.1.738.1.7.4.1.6.1.29 prvtrapsvlanidtype read-only
The control VLAN for this sub-ring. This object must be set to the ID of an existing VLAN. Must not be the same VLAN as a monitored VLAN in any instance. Must perform shutdown to change this object.
         prvtRapsInstSubRingPortTable 1.3.6.1.4.1.738.1.7.4.1.7 no-access
R-APS Instance Sub-ring port Table An entry in this table defines a physical port belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). A sub-ring port can not be part of the main ring.
             prvtRapsInstSubRingPortEntry 1.3.6.1.4.1.738.1.7.4.1.7.1 no-access
An entry in prvtRapsInstSubRingPortTable.
                 prvtRapsInstSubRingPortRowStatus 1.3.6.1.4.1.738.1.7.4.1.7.1.1 rowstatus read-only
The RowStatus for this sub-ring port.
                 prvtRapsInstSubRingPortMep 1.3.6.1.4.1.738.1.7.4.1.7.1.2 prvtrapsmepidtype read-only
The peer maintenance entity group end point ID that should monitor this sub-ring port. A sub-ring MEP can not be used in another ring.
                 prvtRapsInstSubRingPortRpl 1.3.6.1.4.1.738.1.7.4.1.7.1.3 truthvalue read-only
Set to 'true' to define this sub-ring port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
                 prvtRapsInstSubRingPortMonitoringMethod 1.3.6.1.4.1.738.1.7.4.1.7.1.4 prvtrapsmonitoringmethodtype read-only
Ethernet ring protection monitoring methods
         prvtRapsInstSubRingLagTable 1.3.6.1.4.1.738.1.7.4.1.8 no-access
R-APS Instance Sub-ring LAG interface Table An entry in this table defines a LAG interface belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable).
             prvtRapsInstSubRingLagEntry 1.3.6.1.4.1.738.1.7.4.1.8.1 no-access
An entry in prvtRapsInstSubRingLagTable.
                 prvtRapsInstSubRingLagId 1.3.6.1.4.1.738.1.7.4.1.8.1.1 prvtrapslinkaggidtype no-access
Uniquely identifies a LAG interface belonging to a sub-ring. Must be set to the LAG ID of an existing LAG interface. A sub-ring LAG port can not be part of the main ring.
                 prvtRapsInstSubRingLagRowStatus 1.3.6.1.4.1.738.1.7.4.1.8.1.2 rowstatus read-only
The RowStatus for this sub-ring LAG interface.
                 prvtRapsInstSubRingLagMep 1.3.6.1.4.1.738.1.7.4.1.8.1.3 prvtrapsmepidtype read-only
The peer maintenance entity group end point ID that should monitor this sub-ring LAG interface. A sub-ring MEP can not be used in another ring.
                 prvtRapsInstSubRingLagRpl 1.3.6.1.4.1.738.1.7.4.1.8.1.4 truthvalue read-only
Set to 'true' to define this sub-ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
                 prvtRapsInstSubRingLagMonitoringMethod 1.3.6.1.4.1.738.1.7.4.1.8.1.5 prvtrapsmonitoringmethodtype read-only
Ethernet ring protection monitoring methods