PRVT-EPS-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-EPS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, PRVT-SERV-MIB, PRVT-SWITCH-MIB, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtEpsMib 1.3.6.1.4.1.738.1.5.132
Private MIB supporting Linear Ethernet Protection Switching (ITU-T G.8031)
         prvtEpsMibNotifications 1.3.6.1.4.1.738.1.5.132.0
             prvtEpsDefectAlarm 1.3.6.1.4.1.738.1.5.132.0.1
1. EPS service is either operational or not operational; 2. Failure of protocol defects.
             prvtEpsSwitchoverAlarm 1.3.6.1.4.1.738.1.5.132.0.2
The alarm is issued if the active link is changed, pointing to the path where the switchover occured.
             prvtEpsLostCommunication 1.3.6.1.4.1.738.1.5.132.0.3
The alarm is issued in case of non reception of APS frames in three consecutive intervals each representing 5 seconds.
             prvtEpsRestoredCommunication 1.3.6.1.4.1.738.1.5.132.0.4
APS frames are received normally after APS communication failure.
             prvtEpsSignalFailDetected 1.3.6.1.4.1.738.1.5.132.0.5
The alarm is issued in case of CCMs are not received and (3.5 * CCMtime(CCMinterval)) has expired.
             prvtEpsSignalDegradeDetected 1.3.6.1.4.1.738.1.5.132.0.6
The alarm is issued in case of monitored error threshold is crossed: 1W Jitter error, 2W Jitter error, Latency error, Frame loss error.
             prvtEpsProtctSignalFailDetected 1.3.6.1.4.1.738.1.5.132.0.7
The alarm is issued in case of CCMs are not received on the protected link and (3.5 * CCMtime(CCMinterval)) has expired or the protected link is down.
             prvtEpsSignalFailRecovery 1.3.6.1.4.1.738.1.5.132.0.8
The alarm is issued in case of CCMs start to be received correctly again after a prvtEpsSignalFailDetected alarm occured and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up .
             prvtEpsSignalDegradeRecovery 1.3.6.1.4.1.738.1.5.132.0.9
The alarm is issued in case of monitored error threshold is crossed bellow limis: 1W Jitter error, 2W Jitter error, Latency error, Frame loss error.
             prvtEpsProtctSignalFailRecovery 1.3.6.1.4.1.738.1.5.132.0.10
The alarm is issued in case of CCMs start to be received correctly again on the protected link after a prvtEpsProtctSignalFailDetected alarm occured and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up .
         prvtEpsMibObjects 1.3.6.1.4.1.738.1.5.132.1
             prvtEpsService 1.3.6.1.4.1.738.1.5.132.1.1
                 prvtEpsServiceTable 1.3.6.1.4.1.738.1.5.132.1.1.1 no-access
The table contains Ethernet Protection Switching services information.
                     prvtEpsServiceEntry 1.3.6.1.4.1.738.1.5.132.1.1.1.1 no-access
Ethernet Protection Switching information about a specific service.
                         prvtEpsSvcId 1.3.6.1.4.1.738.1.5.132.1.1.1.1.1 unsigned32 read-only
The service ID.
                         prvtEpsServiceCfmMdLevel 1.3.6.1.4.1.738.1.5.132.1.1.1.1.2 dot1agcfmmdlevelornone read-only
Value of the CFM MD level where the protected domain is situated.
                         prvtEpsServicePrimaryLocalCfmMep 1.3.6.1.4.1.738.1.5.132.1.1.1.1.3 dot1agcfmmepidorzero read-only
Primary local CFM MEP Id.
                         prvtEpsServicePrimaryRemoteCfmMep 1.3.6.1.4.1.738.1.5.132.1.1.1.1.4 dot1agcfmmepidorzero read-only
Primary remote CFM MEP Id.
                         prvtEpsServiceSecondaryLocalCfmMep 1.3.6.1.4.1.738.1.5.132.1.1.1.1.5 dot1agcfmmepidorzero read-only
Backup local CFM MEP Id.
                         prvtEpsServiceSecondaryRemoteCfmMep 1.3.6.1.4.1.738.1.5.132.1.1.1.1.6 dot1agcfmmepidorzero read-only
Backup remote CFM MEP Id.
                         prvtEpsServiceLocalState 1.3.6.1.4.1.738.1.5.132.1.1.1.1.7 prvtepsrequeststatetype read-only
Protection state of the local side. The values can be set: rsManualSwitch(7), rsClear(6) or rsLockoutOfProtection(15). The values can be get: rsNoRequest (0), rsDoNotRevert (1), rsReverseRequest (2), rsExercise (4), rsWaitToRestore (5), rsClear (6), rsManualSwitch (7), rsSignalDegrade (9), rsSignalFail (11), rsForcedSwitch (13), rsSignalFailForProtection (14), rsLockoutOfProtection (15).
                         prvtEpsServiceHoldOffTimer 1.3.6.1.4.1.738.1.5.132.1.1.1.1.8 unsigned32 read-only
Value of the Hold Off timer in msec (increments of 100msec).
                         prvtEpsServiceWaitToRestoreTimer 1.3.6.1.4.1.738.1.5.132.1.1.1.1.9 unsigned32 read-only
Value of the Wait To Restore timer in seconds (0 to disable it).
                         prvtEpsServiceApsChannel 1.3.6.1.4.1.738.1.5.132.1.1.1.1.10 truthvalue read-only
Active APS communication.
                         prvtEpsServiceProtection 1.3.6.1.4.1.738.1.5.132.1.1.1.1.11 prvtepsprotectiontype read-only
Type of protection (1+1 or 1:1).
                         prvtEpsServiceDirection 1.3.6.1.4.1.738.1.5.132.1.1.1.1.12 prvtepsdirectiontype read-only
Type of protection (unidirectional or bidirectional).
                         prvtEpsServiceRevertive 1.3.6.1.4.1.738.1.5.132.1.1.1.1.13 truthvalue read-only
Protection type (revertive or non-revertive).
                         prvtEpsServiceActivePath 1.3.6.1.4.1.738.1.5.132.1.1.1.1.14 prvtepsactivepathtype read-only
Protected service active path.
                         prvtEpsServiceDegradeTestType 1.3.6.1.4.1.738.1.5.132.1.1.1.1.15 prvtepsmonitoringtype read-only
Type of test used for monitoring signal degrade situations.
                         prvtEpsServiceDegradeTestOwner 1.3.6.1.4.1.738.1.5.132.1.1.1.1.16 octet string read-only
Owner of the SAA test used for monitoring.
                         prvtEpsServiceDegradeTestName 1.3.6.1.4.1.738.1.5.132.1.1.1.1.17 octet string read-only
Name of the CFM or SAA test used for monitoring.
                         prvtEpsServiceDegradeTestEnable 1.3.6.1.4.1.738.1.5.132.1.1.1.1.18 truthvalue read-only
Start/stop CFM or SAA test for performance monitoring.
                         prvtEpsServiceDefectFop 1.3.6.1.4.1.738.1.5.132.1.1.1.1.19 prvtepsdefectfoptype read-only
Defects noticed by APS protocol could be either none or a composition of the bits (0-3): fullyIncompatibleProvisioning(0) - occures by the reception of three APS frames with the incompatible 'B' bit value during the period of 22.5 seconds; protectionSwitchingIncomplete(1) - occures if the transmitted 'Requested Signal' and the received 'Bridged Signal' do not match for a period of 50ms or longer; protectionConfigurationMismatch(2) - working/protection configuration mismatch, occures by the reception of three APS frames from the working transport entity during the period of 22.5 seconds; epsConfigurationMismatch(3) - provisioning mismatch - for example the local side is set in revertive mode, the remote side is set in non revertive mode.
                         prvtEpsServiceOperationalStatus 1.3.6.1.4.1.738.1.5.132.1.1.1.1.20 truthvalue read-only
The purpose of this status is to identify to the User whether this service is ready for running. The operational status can be up or down. When creating the service the operational status will be down. Receiving CCMs from both transport entities and establishment of APS on the protection transport entity will bring the operational status to up.
                         prvtEpsServicePrimaryStatus 1.3.6.1.4.1.738.1.5.132.1.1.1.1.21 prvtepspathstatustype read-only
Primary path state (psOk(0) or psFailed(1)).
                         prvtEpsServiceSecondaryStatus 1.3.6.1.4.1.738.1.5.132.1.1.1.1.22 prvtepspathstatustype read-only
Secondary path state (psOk(0) or psFailed(1)).
                         prvtEpsServiceRemoteState 1.3.6.1.4.1.738.1.5.132.1.1.1.1.23 prvtepsrequeststatetype read-only
Protection state of the remote side. The values can be get: rsNoRequest (0), rsDoNotRevert (1), rsReverseRequest (2), rsExercise (4), rsWaitToRestore (5), rsClear (6), rsManualSwitch (7), rsSignalDegrade (9), rsSignalFail (11), rsForcedSwitch (13), rsSignalFailForProtection (14), rsLockoutOfProtection (15).
                         prvtEpsServiceRemoteApsChannel 1.3.6.1.4.1.738.1.5.132.1.1.1.1.24 truthvalue read-only
Active APS communication reported by the remote.
                         prvtEpsServiceRemoteProtection 1.3.6.1.4.1.738.1.5.132.1.1.1.1.25 prvtepsprotectiontype read-only
Type of protection (1+1 or 1:1) reported by the remote.
                         prvtEpsServiceRemoteDirection 1.3.6.1.4.1.738.1.5.132.1.1.1.1.26 prvtepsdirectiontype read-only
Type of protection (unidirectional or bidirectional) reported by the remote.
                         prvtEpsServiceRemoteRevertive 1.3.6.1.4.1.738.1.5.132.1.1.1.1.27 truthvalue read-only
Protection type (revertive or non-revertive) reported by the remote.
                         prvtEpsServiceAdminFreeze 1.3.6.1.4.1.738.1.5.132.1.1.1.1.28 truthvalue read-only
Used to freeze the state of the protection service.
                         prvtEpsServiceAdminStatus 1.3.6.1.4.1.738.1.5.132.1.1.1.1.29 integer read-only
Administrative status of the protection. Enumeration: 'down': 2, 'up': 1.
                         prvtEpsServiceRowStatus 1.3.6.1.4.1.738.1.5.132.1.1.1.1.30 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
                         prvtEpsServiceProtectionCounter 1.3.6.1.4.1.738.1.5.132.1.1.1.1.31 unsigned32 read-only
Counts how many times the service has gone to Protection.