POWERHUB-TCPIP-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: POWERHUB-TCPIP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fore 1.3.6.1.4.1.326
         systems 1.3.6.1.4.1.326.2
             lsd 1.3.6.1.4.1.326.2.6
                 lsdproducts 1.3.6.1.4.1.326.2.6.1
                 lsdcommon 1.3.6.1.4.1.326.2.6.2
                     alrip 1.3.6.1.4.1.326.2.6.2.4
                         alripControlType 1.3.6.1.4.1.326.2.6.2.4.1 integer read-write
control type to change the RIP update mechanism Enumeration: 'vlan': 2, 'normal': 1.
                         alRipNormalConfigTable 1.3.6.1.4.1.326.2.6.2.4.2 no-access
Per port RIP configuration per segment method.
                             alripNormalConfigEntry 1.3.6.1.4.1.326.2.6.2.4.2.1 no-access
information about a specific RIP configuration entry
                                 alripNormalConfigPort 1.3.6.1.4.1.326.2.6.2.4.2.1.1 integer read-write
Port number for which the RIP parameters are to be set or viewed.
                                 alripNormalConfigTalk 1.3.6.1.4.1.326.2.6.2.4.2.1.2 integer read-write
Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort. Enumeration: 'yes': 1, 'no': 2.
                                 alripNormalConfigListen 1.3.6.1.4.1.326.2.6.2.4.2.1.3 integer read-write
Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort. Enumeration: 'yes': 1, 'no': 2.
                                 alripNormalConfigPoison 1.3.6.1.4.1.326.2.6.2.4.2.1.4 integer read-write
Controls what happens when a route goes down. If set to no(2), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, but with a metric value of 16, which infinity as far as RIP is concerned. Thus other routers learn immediately that the route is down. Enumeration: 'yes': 1, 'no': 2.
                                 alripNormalConfigRptStaticRt 1.3.6.1.4.1.326.2.6.2.4.2.1.5 integer read-write
When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table. Enumeration: 'yes': 1, 'no': 2.
                                 alripNormalConfigRptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.2.1.6 integer read-write
When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table. Enumeration: 'yes': 1, 'no': 2.
                                 alripNormalConfigAccptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.2.1.7 integer read-write
When RIP packets are received on the port, controls whether the hub accepts(learns) a default route that is reported in a RIP packet. Enumeration: 'yes': 1, 'no': 2.
                         alRipVLANConfigTable 1.3.6.1.4.1.326.2.6.2.4.3 no-access
Per port RIP configuration per VLAN method.
                             alripVLANConfigEntry 1.3.6.1.4.1.326.2.6.2.4.3.1 no-access
information about a specific RIP configuration entry
                                 alripVLANConfigNetNumber 1.3.6.1.4.1.326.2.6.2.4.3.1.1 ipaddress read-write
IP network number for which the RIP parameters are to be set or viewed.
                                 alripVLANConfigTalk 1.3.6.1.4.1.326.2.6.2.4.3.1.2 integer read-write
Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort. Enumeration: 'yes': 1, 'no': 2.
                                 alripVLANConfigListen 1.3.6.1.4.1.326.2.6.2.4.3.1.3 integer read-write
Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort. This field cannot be activated if this interface is controlled by OSPF Enumeration: 'yes': 1, 'no': 2.
                                 alripVLANConfigPoison 1.3.6.1.4.1.326.2.6.2.4.3.1.4 integer read-write
Controls what happens when a route goes down. If set to no(2), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, but with a metric value of 16, which infinity as far as RIP is concerned. Thus other routers learn immediately that the route is down. Enumeration: 'yes': 1, 'no': 2.
                                 alripVLANConfigRptStaticRt 1.3.6.1.4.1.326.2.6.2.4.3.1.5 integer read-write
When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table. Enumeration: 'yes': 1, 'no': 2.
                                 alripVLANConfigRptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.3.1.6 integer read-write
When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table. Enumeration: 'yes': 1, 'no': 2.
                                 alripVLANConfigAccptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.3.1.7 integer read-write
When RIP packets are received on the port, controls whether the hub accepts(learns) a default Enumeration: 'yes': 1, 'no': 2.
                                 alripVLANConfigDelete 1.3.6.1.4.1.326.2.6.2.4.3.1.8 integer read-write
When set to 1, this entry is deleted.
                         alripStatsClear 1.3.6.1.4.1.326.2.6.2.4.4 integer read-write
When set to 1, clears the RIP stats
                         alRipStatPktsRcvd 1.3.6.1.4.1.326.2.6.2.4.5 counter read-only
Packets Received.
                         alRipStatPktsXmitted 1.3.6.1.4.1.326.2.6.2.4.6 counter read-only
Packets Sent.
                         alRipStatReqsRcvd 1.3.6.1.4.1.326.2.6.2.4.7 counter read-only
Requests Received.
                         alRipStatRespRcvd 1.3.6.1.4.1.326.2.6.2.4.8 counter read-only
Responses Received.
                         alRipStatReqsXmitted 1.3.6.1.4.1.326.2.6.2.4.9 counter read-only
Requests Sent.
                         alRipStatRespXmitted 1.3.6.1.4.1.326.2.6.2.4.10 counter read-only
Responses Sent.
                         alRipStatRouteTimeOuts 1.3.6.1.4.1.326.2.6.2.4.11 counter read-only
Route Timeouts.
                         alRipStatShortPkts 1.3.6.1.4.1.326.2.6.2.4.12 counter read-only
Short packets received.
                         alRipStatBadVer 1.3.6.1.4.1.326.2.6.2.4.13 counter read-only
Bad version pkts received.
                         alRipStatBadZeroes 1.3.6.1.4.1.326.2.6.2.4.14 counter read-only
Bad zeroes received.
                         alRipStatBadSrcPort 1.3.6.1.4.1.326.2.6.2.4.15 counter read-only
Packets with bad Source port received.
                         alRipStatBadSrcIp 1.3.6.1.4.1.326.2.6.2.4.16 counter read-only
Packets with bad source IP address received.
                         alRipStatPktsSelf 1.3.6.1.4.1.326.2.6.2.4.17 counter read-only
Packets from self received.
                         alRipigUpdates 1.3.6.1.4.1.326.2.6.2.4.18 counter read-only
number of RIP update trigged.
                         alRipStatPqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.19 counter read-only
Packets queued in RIP process queue.
                         alRipStatPqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.20 counter read-only
Free entries in the RIP processing queue.
                         alRipStatTqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.21 counter read-only
Packets queued in the RIP route timeout process queue.
                         alRipStatTqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.22 counter read-only
Free entries in the RIP route timeout queue.
                         alRipDynPktsRcvd 1.3.6.1.4.1.326.2.6.2.4.23 counter read-only
Packets Received.
                         alRipDynPktsXmitted 1.3.6.1.4.1.326.2.6.2.4.24 counter read-only
Packets Sent.
                         alRipDynReqsRcvd 1.3.6.1.4.1.326.2.6.2.4.25 counter read-only
Requests Received.
                         alRipDynRespRcvd 1.3.6.1.4.1.326.2.6.2.4.26 counter read-only
Responses Received.
                         alRipDynReqsXmitted 1.3.6.1.4.1.326.2.6.2.4.27 counter read-only
Requests Sent.
                         alRipDynRespXmitted 1.3.6.1.4.1.326.2.6.2.4.28 counter read-only
Responses Sent.
                         alRipDynRouteTimeOuts 1.3.6.1.4.1.326.2.6.2.4.29 counter read-only
Route Timeouts.
                         alRipDynShortPkts 1.3.6.1.4.1.326.2.6.2.4.30 counter read-only
Short packets received.
                         alRipDynBadVer 1.3.6.1.4.1.326.2.6.2.4.31 counter read-only
Bad version pkts received.
                         alRipDynBadZeroes 1.3.6.1.4.1.326.2.6.2.4.32 counter read-only
Bad zeroes received.
                         alRipDynBadSrcPort 1.3.6.1.4.1.326.2.6.2.4.33 counter read-only
Packets with bad Source port received.
                         alRipDynBadSrcIp 1.3.6.1.4.1.326.2.6.2.4.34 counter read-only
Packets with bad source IP address received.
                         alRipDynPktsSelf 1.3.6.1.4.1.326.2.6.2.4.35 counter read-only
Packets from self received.
                         alRipDynNumTrigUpdates 1.3.6.1.4.1.326.2.6.2.4.36 counter read-only
number of RIP update trigged.
                         alRipDyntPqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.37 counter read-only
Packets queued in RIP process queue.
                         alRipDynPqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.38 counter read-only
Free entries in the RIP processing queue.
                         alRipDynTqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.39 counter read-only
Packets queued in the RIP route timeout process queue.
                         alRipDynTqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.40 counter read-only
Free entries in the RIP route timeout queue.
                         alRipAccptFilTable 1.3.6.1.4.1.326.2.6.2.4.41 no-access
RIP Accept filter table
                               ripAccptFilEntry 1.3.6.1.4.1.326.2.6.2.4.41.1 no-access
RIP Accept filter entry
                                   ripAccptFilNumber 1.3.6.1.4.1.326.2.6.2.4.41.1.1 integer read-write
Filter Number; Range 1-64
                                   ripAccptFilAddr 1.3.6.1.4.1.326.2.6.2.4.41.1.2 ipaddress read-write
Valid network or subnet address
                                   ripAccptFilMask 1.3.6.1.4.1.326.2.6.2.4.41.1.3 ipaddress read-write
Accept filter Mask
                                   ripAccptFilPort 1.3.6.1.4.1.326.2.6.2.4.41.1.4 integer read-write
Port number on which network should be accepted or not. Range 1-14.
                         alRipReportFilTable 1.3.6.1.4.1.326.2.6.2.4.42 no-access
RIP Report filter table
                               ripReportFilEntry 1.3.6.1.4.1.326.2.6.2.4.42.1 no-access
RIP Report filter entry
                                   ripReportFilNumber 1.3.6.1.4.1.326.2.6.2.4.42.1.1 integer read-write
Filter Number; Range 1-64
                                   ripReportFilAddr 1.3.6.1.4.1.326.2.6.2.4.42.1.2 ipaddress read-write
Valid network or subnet address
                                   ripReportFilMask 1.3.6.1.4.1.326.2.6.2.4.42.1.3 ipaddress read-write
Report filter Mask
                                   ripReportFilPort 1.3.6.1.4.1.326.2.6.2.4.42.1.4 integer read-write
Port number on which network should be reported or not. Port number range 1-14
                     altcp 1.3.6.1.4.1.326.2.6.2.5
                         alTcpConnIdleTime 1.3.6.1.4.1.326.2.6.2.5.1 integer read-write
Time in minutes before sending keep-alives. The range is 5 to 30 minutes.
                         alTcpKeepAliveInt 1.3.6.1.4.1.326.2.6.2.5.2 integer read-write
Time interval in seconds between two successive keep-alive sends. The range is 30 to 240 seconds.
                         alTcpDisconnectInt 1.3.6.1.4.1.326.2.6.2.5.3 integer read-only
Time interval in seconds, before an idle connection is dropped. This equals to the sum of alTcpConnIdleTime plus eight times the alTcpKeepAliveInt interval.
                         alTcpShortSegRcvd 1.3.6.1.4.1.326.2.6.2.5.4 integer read-only
Number of short segments received.
                         alTcpStatsClear 1.3.6.1.4.1.326.2.6.2.5.5 integer read-write
When set to 1, clears the TCP stats.
                         alTcpConnTable 1.3.6.1.4.1.326.2.6.2.5.6 no-access
A table containing TCP connection-specific information.
                             alTcpConnEntry 1.3.6.1.4.1.326.2.6.2.5.6.1 no-access
Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
                                 alTcpConnId 1.3.6.1.4.1.326.2.6.2.5.6.1.1 integer read-only
The connection Identifier by which a connection is addressed.
                                 alTcpConnState 1.3.6.1.4.1.326.2.6.2.5.6.1.2 integer read-write
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. Enumeration: 'synReceived': 4, 'established': 5, 'finWait2': 7, 'timeWait': 11, 'finWait1': 6, 'lastAck': 9, 'closeWait': 8, 'deleteTCB': 12, 'closed': 1, 'closing': 10, 'listen': 2, 'synSent': 3.
                                 alTcpConnLocalAddress 1.3.6.1.4.1.326.2.6.2.5.6.1.3 ipaddress read-only
The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
                                 alTcpConnLocalPort 1.3.6.1.4.1.326.2.6.2.5.6.1.4 integer read-only
The local port number for this TCP connection.
                                 alTcpConnRemAddress 1.3.6.1.4.1.326.2.6.2.5.6.1.5 ipaddress read-only
The remote IP address for this TCP connection.
                                 alTcpConnRemPort 1.3.6.1.4.1.326.2.6.2.5.6.1.6 integer read-only
The remote port number for this TCP connection.
                         alTcpFilTable 1.3.6.1.4.1.326.2.6.2.5.7 no-access
TCP filter table
                             tcpFilEntry 1.3.6.1.4.1.326.2.6.2.5.7.1 no-access
TCP filter entry
                                 tcpFilNumber 1.3.6.1.4.1.326.2.6.2.5.7.1.1 integer read-write
Filter Number; Range 1-32
                                 tcpFilSrcAddr 1.3.6.1.4.1.326.2.6.2.5.7.1.2 ipaddress read-write
Source address
                                 tcpFilSrcMask 1.3.6.1.4.1.326.2.6.2.5.7.1.3 ipaddress read-write
Mask
                                 tcpFilProtocol 1.3.6.1.4.1.326.2.6.2.5.7.1.4 integer read-write
tcp(1) or udp(2)
                                 tcpFilDstPort 1.3.6.1.4.1.326.2.6.2.5.7.1.5 integer read-write
smtp(1000), telnet(2000), ftp(3000) or valid port Number
                     alip 1.3.6.1.4.1.326.2.6.2.6
                         alArpTableClear 1.3.6.1.4.1.326.2.6.2.6.1 integer read-write
When set, clears the ARP table.
                         alArpAge 1.3.6.1.4.1.326.2.6.2.6.2 integer read-write
Timeout in minutes for aging ARP entries; when set to zero, set-arpage is turned off.
                         alArpStatReqsRcvd 1.3.6.1.4.1.326.2.6.2.6.3 counter read-only
Requests Received.
                         alArpStatRepliesRcvd 1.3.6.1.4.1.326.2.6.2.6.4 counter read-only
Replies Received.
                         alArpStatInvalidOpcodes 1.3.6.1.4.1.326.2.6.2.6.5 counter read-only
Invalid Opcodes Received.
                         alArpStatRequestsSent 1.3.6.1.4.1.326.2.6.2.6.6 counter read-only
Requests Sent.
                         alArpStatRepliesSent 1.3.6.1.4.1.326.2.6.2.6.7 counter read-only
Replies Sent.
                         alArpStatProxyReplies 1.3.6.1.4.1.326.2.6.2.6.8 counter read-only
number of proxy replied
                         alArpDynReqsRcvd 1.3.6.1.4.1.326.2.6.2.6.9 counter read-only
Requests Received.
                         alArpDynRepliesRcvd 1.3.6.1.4.1.326.2.6.2.6.10 counter read-only
Replies Received.
                         alArpDynInvalidOpcodes 1.3.6.1.4.1.326.2.6.2.6.11 counter read-only
Invalid Opcodes Received.
                         alArpDynRequestsSent 1.3.6.1.4.1.326.2.6.2.6.12 counter read-only
Requests Sent.
                         alArpDynRepliesSent 1.3.6.1.4.1.326.2.6.2.6.13 counter read-only
Replies Sent.
                         alArpDynProxyReplies 1.3.6.1.4.1.326.2.6.2.6.14 counter read-only
number of proxy replied
                         alArpStatsClear 1.3.6.1.4.1.326.2.6.2.6.15 integer read-write
When set to 1, clears the ARP statistics.
                         alArpProxyTable 1.3.6.1.4.1.326.2.6.2.6.16 no-access
Per port proxy arp enable/disable
                               arpProxyEntry 1.3.6.1.4.1.326.2.6.2.6.16.1 no-access
information of a specific arp proxy entry
                                   arpProxyPort 1.3.6.1.4.1.326.2.6.2.6.16.1.1 integer read-only
Port Number
                                   arpProxyEnable 1.3.6.1.4.1.326.2.6.2.6.16.1.2 integer read-write
If set to Enable(1), enables proxy arp arp requests received on the port identified by the instance of arpProxyPort. If set to Disable(2), it disables the proxy arp for arp requests received on the ports identified by the instance of arpProxyPort.
                         alIpTemplateTable 1.3.6.1.4.1.326.2.6.2.6.17 no-access
Per template information
                               alipTemplateEntry 1.3.6.1.4.1.326.2.6.2.6.17.1 no-access
Information about a filtering template
                                   alipTemplateNumber 1.3.6.1.4.1.326.2.6.2.6.17.1.1 integer read-write
The number of the template with which it is identified.
                                   alipTemplateDelete 1.3.6.1.4.1.326.2.6.2.6.17.1.2 integer read-write
When set to 1, this entry is deleted.
                                   alipTemplateAction 1.3.6.1.4.1.326.2.6.2.6.17.1.3 integer read-write
Whether the packet being filtered should be forwarded or blocked Enumeration: 'forward': 1, 'block': 2.
                                   alipTemplateSrcAddr 1.3.6.1.4.1.326.2.6.2.6.17.1.4 ipaddress read-write
The portion of the packet's source address specified by ipTemplateSrcMask is matched with this address.
                                   alipTemplateSrcMask 1.3.6.1.4.1.326.2.6.2.6.17.1.5 ipaddress read-write
Source Mask. The portion specified by this mask is matched with source address.
                                   alipTemplateDstAddr 1.3.6.1.4.1.326.2.6.2.6.17.1.6 ipaddress read-write
The portion of the packet's destination address specified by ipTemplateDstMask is matched with this address.
                                   alipTemplateDstMask 1.3.6.1.4.1.326.2.6.2.6.17.1.7 ipaddress read-write
Destination mask. The portion specified by this mask is matched with destination address.
                                   alipTemplateProtocol 1.3.6.1.4.1.326.2.6.2.6.17.1.8 integer read-write
Determines the type of packets that need to be filtered. PowerHub currently recognizes ip(1) , icmp(1), ipinip(4), tcp(6), udp(17), ospf(89). If all(0) is specified, the filter looks for all protocols other than the ones PowerHub currently accepts. The IP protocol numbers are listed in RFC 1340
                                   alipTemplateOperator 1.3.6.1.4.1.326.2.6.2.6.17.1.9 integer read-write
Allowed only if the protocol field is tcp or udp. The following operators allowed: (1) Unknown =(2) Equal to ~=(3) Not equal to <(4) Less than >(5) Greater than conreq(6) Connect request. Connect request is valid only if protocol is tcp Enumeration: 'notequalto': 3, 'unknown': 1, 'equalto': 2, 'conreq': 6, 'lessthan': 4, 'greaterthan': 5.
                                   alipTemplateDstPort 1.3.6.1.4.1.326.2.6.2.6.17.1.10 integer read-write
This is expressed as either a well-known protocol name or a well-known tcp or udp port number. 0 means unknown
                         alIpRuleTable 1.3.6.1.4.1.326.2.6.2.6.18 no-access
Per template information
                               alipRuleEntry 1.3.6.1.4.1.326.2.6.2.6.18.1 no-access
Information about a specific filtering rule
                                   alipRuleNumber 1.3.6.1.4.1.326.2.6.2.6.18.1.1 integer read-write
The number of the rule with which it is Identified.
                                   alipRuleDelete 1.3.6.1.4.1.326.2.6.2.6.18.1.2 integer read-write
If set to 1 the entry is deleted.
                                   alipRuleTemplates 1.3.6.1.4.1.326.2.6.2.6.18.1.3 displaystring read-write
The templates associated with the rule identified by the instance of ipRuleNumber.
                         alipAcsCtrlTable 1.3.6.1.4.1.326.2.6.2.6.19 no-access
Per port IP access control filters
                               alipAcsCtrlEntry 1.3.6.1.4.1.326.2.6.2.6.19.1 no-access
information of a specific rule applied to segment
                                   alipAcsCtrlPort 1.3.6.1.4.1.326.2.6.2.6.19.1.1 integer read-write
Port number of the port for which the source and destination access filter apply.
                                   alipAcsCtrlDelete 1.3.6.1.4.1.326.2.6.2.6.19.1.2 integer read-write
If set to 1, the entry is deleted.
                                   alipAcsCtrlSourceRule 1.3.6.1.4.1.326.2.6.2.6.19.1.3 integer read-write
the source rule is assigned to the segment
                                   alipAcsCtrlDestRule 1.3.6.1.4.1.326.2.6.2.6.19.1.4 integer read-write
the destination rule is assigned to the segment
                         alipFilStatStatsTable 1.3.6.1.4.1.326.2.6.2.6.20 no-access
Per template static statistics -- stats from the beginning of the last system reboot.
                               alipFilStatStatsEntry 1.3.6.1.4.1.326.2.6.2.6.20.1 no-access
filter statistics entry
                                   alipFilStatStatsTemplate 1.3.6.1.4.1.326.2.6.2.6.20.1.1 counter read-only
The template number for which the stats are displayed
                                   alipFilStatStatsInPkts 1.3.6.1.4.1.326.2.6.2.6.20.1.2 counter read-only
The number of packets that matched the template identified by the instance of alipFilStatStatsTemplate. The template has to be a Source template.
                                   alipFilStatStatsOutPkts 1.3.6.1.4.1.326.2.6.2.6.20.1.3 counter read-only
The number of packets that matched the template identified by the instance of alipFilStatStatsTemplate. The template has to be a Destination template.
                         alipFilDynStatsTable 1.3.6.1.4.1.326.2.6.2.6.21 no-access
Per template dynamic statistics -- stats from the beginning of the last clear.
                               alipFilDynStatsEntry 1.3.6.1.4.1.326.2.6.2.6.21.1 no-access
information of a specific statistic entry
                                   alipFilDynStatsTemplate 1.3.6.1.4.1.326.2.6.2.6.21.1.1 counter read-only
The template number for which the stats are displayed
                                   alipFilDynStatsInPkts 1.3.6.1.4.1.326.2.6.2.6.21.1.2 counter read-only
The number of packets that matched the template identified by the instance of alipFilDynStatsTemplate. The template has to be a Source template.
                                   alipFilDynStatsOutPkts 1.3.6.1.4.1.326.2.6.2.6.21.1.3 counter read-only
The number of packets that matched the template identified by the instance of alipFilDynStatsTemplate. The template has to be a Destination template.
                                   alipFilDynStatsClear 1.3.6.1.4.1.326.2.6.2.6.21.1.4 integer read-write
Setting the value of 1, it will clear all the stats for the template identified by the instance of alipFilDynStatsTemplate.
                         alipTotalFilPacketForward 1.3.6.1.4.1.326.2.6.2.6.22 counter read-only
The total number of packets forwarded since last system reset.
                         alipTotalFilPacketBlock 1.3.6.1.4.1.326.2.6.2.6.23 counter read-only
The total number of packets blocked since last system reset.
                         alipCurrentFilPacketForward 1.3.6.1.4.1.326.2.6.2.6.24 counter read-only
The total number of packets forwarded since the last statistical clear.
                         alipCurrentFilPacketBlock 1.3.6.1.4.1.326.2.6.2.6.25 counter read-only
The total number of packets blocked since the last statistical clear.
                         alIpInterfaceTable 1.3.6.1.4.1.326.2.6.2.6.26 no-access
IP interface table corresponding to the command - interface-table.
                               alIpInterfaceEntry 1.3.6.1.4.1.326.2.6.2.6.26.1 no-access
Entry of IP interface
                                   ipInterfaceNumber 1.3.6.1.4.1.326.2.6.2.6.26.1.1 integer read-write
Segment number of the selecetd IP address interface entry.
                                   ipInterfaceAddress 1.3.6.1.4.1.326.2.6.2.6.26.1.2 ipaddress read-write
IP address of the selected IP segment number.
                                   ipInterfaceSubnetMask 1.3.6.1.4.1.326.2.6.2.6.26.1.3 ipaddress read-write
IP subnet mask for the selected IP address.
                                   ipInterfaceBroadCast 1.3.6.1.4.1.326.2.6.2.6.26.1.4 integer read-write
Specifies style of broadcast address on a segment basis: when you specify 'br0', the hub sends an 'all-0s' broadcast; when you sepcify 'br1', the hub sends 'all-1s' broadcast. The default is 'br1'. Enumeration: 'br1': 2, 'br0': 1.
                                   ipInterfaceCost 1.3.6.1.4.1.326.2.6.2.6.26.1.5 integer read-write
Specifies an additiopnal cost of using the subnet interface. This cost is the number of extra hops to the destination. The range is 1 thru 14. The default is 0. When you set the cost to a value greater than zero, routing is forced thru the other hub if it is alive.
                                   ipInterfaceDelete 1.3.6.1.4.1.326.2.6.2.6.26.1.6 integer read-write
When this object is set with value 1, the IP interface corresponds to the segment number will be deleted; otherwise this object returns value 0.
                                   ipInterfaceMtu 1.3.6.1.4.1.326.2.6.2.6.26.1.7 integer read-only
Displays the maximum transimission unit size allowed on this IP interface.
                                   ipInterfaceState 1.3.6.1.4.1.326.2.6.2.6.26.1.8 integer read-only
Displays the up/down status of the IP interface. Enumeration: 'down': 2, 'up': 1.
                                   ipInterfacePktsIn 1.3.6.1.4.1.326.2.6.2.6.26.1.9 counter read-only
Total number of packets received on this interface.
                                   ipInterfaceOctetsIn 1.3.6.1.4.1.326.2.6.2.6.26.1.10 counter read-only
Total number of bytes received on this interface.
                                   ipInterfacePktsOut 1.3.6.1.4.1.326.2.6.2.6.26.1.11 counter read-only
Total number of packets transmitted to the network by this interface.
                                   ipInterfaceOctetsOut 1.3.6.1.4.1.326.2.6.2.6.26.1.12 counter read-only
Total number of bytes transimitted to the network by this interface.
                         alIpRtCacheTable 1.3.6.1.4.1.326.2.6.2.6.27 no-access
IP Route Cache for all ports
                               alIpRtCacheEntry 1.3.6.1.4.1.326.2.6.2.6.27.1 no-access
IP Route cache for each port
                                   ipRtCachePort 1.3.6.1.4.1.326.2.6.2.6.27.1.1 integer read-write
Port number for the ip route cache.
                                   ipRtCacheDstAddress 1.3.6.1.4.1.326.2.6.2.6.27.1.2 integer read-write
Ip route cache destination address.
                                   ipRtCacheClear 1.3.6.1.4.1.326.2.6.2.6.27.1.3 integer read-write
Setting this to Clear(1), will clear the routecache for the port and Destination address identified by the instance of ipRtCachePort and ipRtCacheDstAddress.
                         alVlanIpInterfaceTable 1.3.6.1.4.1.326.2.6.2.6.28 no-access
Vlan IP interface table corresponding to the command - vlan add/del IP interface.
                               alVlanIpInterfaceEntry 1.3.6.1.4.1.326.2.6.2.6.28.1 no-access
Entry of Vlan IP interface
                                   vlanIpInterfaceNameLen 1.3.6.1.4.1.326.2.6.2.6.28.1.1 integer read-only
The string length of Vlan name of the selecetd vlan IP interface entry.
                                   vlanIpInterfaceName 1.3.6.1.4.1.326.2.6.2.6.28.1.2 displaystring read-only
Vlan name of the selecetd vlan IP interface entry.
                                   vlanIpInterfaceAddress 1.3.6.1.4.1.326.2.6.2.6.28.1.3 ipaddress read-only
IP address of the selected vlan IP interface entry.
                                   vlanIpInterfaceSubnetMask 1.3.6.1.4.1.326.2.6.2.6.28.1.4 ipaddress read-write
IP subnet mask for the selected vlan IP interface entry.
                                   vlanIpInterfaceType 1.3.6.1.4.1.326.2.6.2.6.28.1.5 integer read-write
Specifies type of interface of vlan The types are are broadcast, nbma (nonBroadcastMultiAccess i.e.,CLIP), ptop (i.e.,PVC). Default is broadcast. The discontinuos enumeration values actually mean bitmask value which maps to bit positions in the agent. Enumeration: 'broadcast': 1, 'nbma': 2, 'pointToPoint': 4.
                                   vlanIpInterfaceNeighborAddress 1.3.6.1.4.1.326.2.6.2.6.28.1.6 ipaddress read-write
Specifies the ip address of neightbors of the interfaces of the vlan. This object apply only when interface type is pointToPoint.
                                   vlanIpInterfaceRowStatus 1.3.6.1.4.1.326.2.6.2.6.28.1.7 integer read-write
The status of the table. The table can not be changed when it is active. Enumeration: 'createAndWait': 5, 'notInservice': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.