POWERHUB-CORE-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: POWERHUB-CORE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fore 1.3.6.1.4.1.326
         systems 1.3.6.1.4.1.326.2
             lsd 1.3.6.1.4.1.326.2.6
                 lsdproducts 1.3.6.1.4.1.326.2.6.1
                     powerhub4k6k7k 1.3.6.1.4.1.326.2.6.1.1
                         alchassis 1.3.6.1.4.1.326.2.6.1.1.1
                             alSlotTable 1.3.6.1.4.1.326.2.6.1.1.1.1 no-access
A table that contains information about each slot in the PowerHub 4k6k7k chassis.
                                 alSlotEntry 1.3.6.1.4.1.326.2.6.1.1.1.1.1 no-access
Information about a specific slot.
                                     alSlotNumber 1.3.6.1.4.1.326.2.6.1.1.1.1.1.1 integer read-only
The slot number for which the following information applies.
                                     alSlotCardType 1.3.6.1.4.1.326.2.6.1.1.1.1.1.2 integer read-only
The card type for this slot. Enumeration: 'ph7-cddiconcentrator': 11, 'ph7-6x1fastethernet': 25, 'ph4k6k-utp12x1': 13, 'ph7-utp16x1': 6, 'ph7-2x8fastethernet': 28, 'ph4k6k-FL6x1': 12, 'ph7-utp13x1': 7, 'ph7-fddidualuniversal': 8, 'ph4k6k-ethernet100TX': 15, 'ph4k6k-ethernet100FXTX': 17, 'ph6-powercell600': 27, 'ph7-powercell700': 24, 'ph7-packetengine2': 30, 'ph4k6k-ethernet6x1FL': 22, 'ph7-fddidualdas': 4, 'ph4k6k-fddisingledas': 14, 'ph7-utp4x4': 2, 'ph7-packetengine1': 29, 'ph7-utp4x6': 3, 'ph7-fddiconcentrator': 10, 'ph4k6k-ethernet12x1FL': 21, 'ph7-fddisingledas': 5, 'ph4k6k-ethernet100FXFX': 18, 'ph4k6k-ethernet100FX': 19, 'ph4k6k-ethernet24x1': 20, 'ph7-universalethernet': 1, 'ph4k6k-ethernet100dualTX': 16, 'ph7-10x1FL': 26, 'ph7-fddisingleuniversal': 9, 'ph4-tenbt-utp': 23.
                                     alSlotStatus 1.3.6.1.4.1.326.2.6.1.1.1.1.1.3 integer read-only
The status of the card in this slot. Enumeration: 'notpresent': 2, 'presentequipped': 3, 'notequipped': 1.
                                     alSlotModel 1.3.6.1.4.1.326.2.6.1.1.1.1.1.4 displaystring read-only
The model number for this card.
                                     alSlotRevision 1.3.6.1.4.1.326.2.6.1.1.1.1.1.5 displaystring read-only
The revision number for this card.
                                     alSlotIssue 1.3.6.1.4.1.326.2.6.1.1.1.1.1.6 displaystring read-only
The issue number for this slot.
                                     alSlotDeviation 1.3.6.1.4.1.326.2.6.1.1.1.1.1.7 displaystring read-only
The deviation for this slot.
                                     alSlotSerialNumber 1.3.6.1.4.1.326.2.6.1.1.1.1.1.8 displaystring read-only
The serial number of this card this slot.
                                     alSlotPower5 1.3.6.1.4.1.326.2.6.1.1.1.1.1.9 integer read-only
The number of milliamps. of current drawn by this slot at 5 Volts.
                                     alSlotPower12 1.3.6.1.4.1.326.2.6.1.1.1.1.1.10 integer read-only
The number of milliamps. of current drawn by this slot at 12 Volts.
                                     alSlotPower33 1.3.6.1.4.1.326.2.6.1.1.1.1.1.11 integer read-only
The number of milliamps. of current drawn by this slot at 3.3 Volts.
                                     alSlotPowerOther 1.3.6.1.4.1.326.2.6.1.1.1.1.1.12 integer read-only
The number of milliamps. of current drawn by this slot at OTHER voltage.
                             alVportTable 1.3.6.1.4.1.326.2.6.1.1.1.2 no-access
A table that contains information about each virtual port in the PowerHub 4k6k7k chassis. This table differs from the alSlotToVportTable mainly in how this table is indexed.
                                 alVportEntry 1.3.6.1.4.1.326.2.6.1.1.1.2.1 no-access
Information about a specific virtual port.
                                     alVportNumber 1.3.6.1.4.1.326.2.6.1.1.1.2.1.1 integer read-only
The virtual port number for which the following information applies.
                                     alVportSlotNumber 1.3.6.1.4.1.326.2.6.1.1.1.2.1.2 integer read-only
The slot number which holds the physical port that corresponds to the virtual port of interest.
                                     alVportPortNumber 1.3.6.1.4.1.326.2.6.1.1.1.2.1.3 integer read-only
The physical port number on the slot that corresponds to this virtual port number, identified by alVportNumber.
                                     alVportPortType 1.3.6.1.4.1.326.2.6.1.1.1.2.1.4 integer read-only
The port type for this virtual port. Enumeration: 'fddiSMMM': 13, 'atm': 36, 'oc12-utp': 59, 'fddiUTPLC': 25, 'oc12-vmf': 61, 'fddiLCSM': 19, 'ds3-vmf': 40, 'e3-vmf': 47, 'fddiUTPEMPTY': 27, 'fddiEMPTYMM': 29, 'fddiSMSM': 14, 'fddiUTPSM': 24, 'fddiLCMM': 18, 'fddiMMMM': 8, 'e3-mf': 49, 'fddiMMEMPTY': 12, 'oc3-sf': 57, 'mauHdx': 4, 'aui': 3, 'mauFdx': 5, 'fasteth100fx': 34, 'ds3-utp': 38, 'ds3-sf': 43, 'e3-lmf': 48, 'oc3-cx': 58, 'fddiMMUTP': 11, 'oc3-utp': 52, 'fddiSMEMPTY': 17, 'bnc': 1, 'ds3-cx': 44, 'oc3-stp': 53, 'oc12-sf': 64, 'fddiSMUTP': 16, 'notstuffed': 7, 'fiber': 2, 'fddiLCEMPTY': 22, 'ds3-stp': 39, 'e3-stp': 46, 'fddiUTPMM': 23, 'fddiSMLC': 15, 'fddiMMSM': 9, 'oc12-mf': 63, 'fb': 6, 'ds3-lmf': 41, 'fddiLCUTP': 21, 'fddiLCLC': 20, 'oc3-mf': 56, 'fddiMMLC': 10, 'oc3-vmf': 54, 'oc3-lmf': 55, 'e3-cx': 51, 'fx100base': 33, 'e3-utp': 45, 'fddiEMPTYUTP': 32, 'oc12-cx': 65, 'fddiEMPTYSM': 30, 'oc12-stp': 60, 'fema-10-100': 66, 'ds3-mf': 42, 'utp': 37, 'fddiUTPUTP': 26, 'oc12-lmf': 62, 'fddiEMPTYLC': 31, 'fddiEMPTYEMPTY': 28, 'fasteth100tx': 35, 'e3-sf': 50.
                                     alVportStatus 1.3.6.1.4.1.326.2.6.1.1.1.2.1.5 integer read-only
The port status for this virtual port. Enumeration: 'bad': 1, 'removed': 2, 'good': 3.
                                     alVportControllerType 1.3.6.1.4.1.326.2.6.1.1.1.2.1.6 integer read-only
The controller type for this virtual port.
                                     alVportDataRateConfig 1.3.6.1.4.1.326.2.6.1.1.1.2.1.7 integer read-write
The data rate requested for this virtual port. Enumeration: 'none': 1, 'speed100Mbps': 3, 'speed10Mbps': 2.
                                     alVportOperModeConfig 1.3.6.1.4.1.326.2.6.1.1.1.2.1.8 integer read-write
The operating mode requested for this virtual port. Enumeration: 'fullLoopback': 6, 'none': 1, 'fullDuplex': 4, 'loopback': 5, 'normal': 2, 'decLoopback': 7, 'halfDuplex': 3.
                                     alVportAutoNegotiateConfig 1.3.6.1.4.1.326.2.6.1.1.1.2.1.9 integer read-write
The auto-negotiation requested for this virtual port. Enumeration: 'on': 2, 'none': 1, 'off': 3.
                                     alVportDataRateStatus 1.3.6.1.4.1.326.2.6.1.1.1.2.1.10 integer read-only
The actual data rate for this virtual port. Enumeration: 'undetermined': 1, 'speed100Mbps': 3, 'speed10Mbps': 2.
                                     alVportOperModeStatus 1.3.6.1.4.1.326.2.6.1.1.1.2.1.11 integer read-only
The actual operating mode for this virtual port. Enumeration: 'undetermined': 1, 'fullDuplex': 3, 'loopback': 4, 'halfDuplex': 2.
                             alSlotToVportTable 1.3.6.1.4.1.326.2.6.1.1.1.3 no-access
A table that contains information about each port of each slot in the PowerHub 4k6k7k chassis. This table is established as a way to specify the information about a physical port located on a slot in the PowerHub 4k6k7k chassis. This table a slot and port number scheme. This table differs from uses two indices (the slot number and the port number) to identify a port.
                                 alSlotVportEntry 1.3.6.1.4.1.326.2.6.1.1.1.3.1 no-access
Information about a specific port in a specific slot. The slot number and the port number in that slot (numbered left to right in ascending order) identifies a specific port.
                                     alSlotVportSlotNumber 1.3.6.1.4.1.326.2.6.1.1.1.3.1.1 integer read-only
The slot number which holds the port of interest.
                                     alSlotVportPortNumber 1.3.6.1.4.1.326.2.6.1.1.1.3.1.2 integer read-only
The physical port number on a slot which represents the port of interest. The physical port is numbered from left to right in a slot.
                                     alSlotVportNumber 1.3.6.1.4.1.326.2.6.1.1.1.3.1.3 integer read-only
The virtual port number which corresponds to the port that is identified by the slot and port number. This scheme thereby relates each virtual port to a slot and physical port tuplet.
                                     alSlotVportPortType 1.3.6.1.4.1.326.2.6.1.1.1.3.1.4 integer read-only
The port type for this port. Enumeration: 'fddiSMMM': 13, 'atm': 36, 'oc12-utp': 59, 'fddiUTPLC': 25, 'oc12-vmf': 61, 'fddiLCSM': 19, 'ds3-vmf': 40, 'e3-vmf': 47, 'fddiUTPEMPTY': 27, 'fddiEMPTYMM': 29, 'fddiSMSM': 14, 'fddiUTPSM': 24, 'fddiLCMM': 18, 'fddiMMMM': 8, 'e3-mf': 49, 'fddiMMEMPTY': 12, 'oc3-sf': 57, 'mauHdx': 4, 'aui': 3, 'mauFdx': 5, 'fasteth100fx': 34, 'ds3-utp': 38, 'ds3-sf': 43, 'e3-lmf': 48, 'oc3-cx': 58, 'fddiMMUTP': 11, 'oc3-utp': 52, 'fddiSMEMPTY': 17, 'bnc': 1, 'ds3-cx': 44, 'oc3-stp': 53, 'oc12-sf': 64, 'fddiSMUTP': 16, 'notstuffed': 7, 'fiber': 2, 'fddiLCEMPTY': 22, 'ds3-stp': 39, 'e3-stp': 46, 'fddiUTPMM': 23, 'fddiSMLC': 15, 'fddiMMSM': 9, 'oc12-mf': 63, 'fb': 6, 'ds3-lmf': 41, 'fddiLCUTP': 21, 'fddiLCLC': 20, 'oc3-mf': 56, 'fddiMMLC': 10, 'oc3-vmf': 54, 'oc3-lmf': 55, 'e3-cx': 51, 'fx100base': 33, 'e3-utp': 45, 'fddiEMPTYUTP': 32, 'oc12-cx': 65, 'fddiEMPTYSM': 30, 'oc12-stp': 60, 'fema-10-100': 66, 'ds3-mf': 42, 'utp': 37, 'fddiUTPUTP': 26, 'oc12-lmf': 62, 'fddiEMPTYLC': 31, 'fddiEMPTYEMPTY': 28, 'fasteth100tx': 35, 'e3-sf': 50.
                                     alSlotVportStatus 1.3.6.1.4.1.326.2.6.1.1.1.3.1.5 integer read-only
The status for this port.
                                     alSlotVportControllerType 1.3.6.1.4.1.326.2.6.1.1.1.3.1.6 integer read-only
The controller type for this port.
                                     alSlotVportDataRateConfig 1.3.6.1.4.1.326.2.6.1.1.1.3.1.7 integer read-write
The data rate requested for this port. The actual data rate may be different from the requested data rate. Enumeration: 'none': 1, 'speed100Mbps': 3, 'speed10Mbps': 2.
                                     alSlotVportOperModeConfig 1.3.6.1.4.1.326.2.6.1.1.1.3.1.8 integer read-write
The operating mode requested for this port. Enumeration: 'fullLoopback': 6, 'none': 1, 'fullDuplex': 4, 'loopback': 5, 'normal': 2, 'decLoopback': 7, 'halfDuplex': 3.
                                     alSlotVportAutoNegotiateConfig 1.3.6.1.4.1.326.2.6.1.1.1.3.1.9 integer read-write
The auto-negotiation requested for this port. Enumeration: 'on': 2, 'none': 1, 'off': 3.
                                     alSlotVportDataRateStatus 1.3.6.1.4.1.326.2.6.1.1.1.3.1.10 integer read-only
The actual data rate for this port. Enumeration: 'undetermined': 1, 'speed100Mbps': 3, 'speed10Mbps': 2.
                                     alSlotVportOperModeStatus 1.3.6.1.4.1.326.2.6.1.1.1.3.1.11 integer read-only
The actual operating mode for this port. Enumeration: 'undetermined': 1, 'fullDuplex': 3, 'loopback': 4, 'halfDuplex': 2.
                             alPSTable 1.3.6.1.4.1.326.2.6.1.1.1.4 no-access
A table that contains information about each power supply in the PowerHub 4k6k7k chassis.
                                 alPSEntry 1.3.6.1.4.1.326.2.6.1.1.1.4.1 no-access
Information about a specific power supply.
                                     alPSNumber 1.3.6.1.4.1.326.2.6.1.1.1.4.1.1 integer read-only
The power supply number
                                     alPSStatus 1.3.6.1.4.1.326.2.6.1.1.1.4.1.2 integer read-only
The status of the power supply identified by the instance of alPSNumber. Enumeration: 'powerNotPresent': 3, 'powerUnknown': 5, 'powerPresentButBad': 2, 'powerGood': 1, 'powerIntermittant': 4.
                             alCpuSlot 1.3.6.1.4.1.326.2.6.1.1.1.5 integer read-only
The slot number in which the packet engine resides
                             alSlotChassis 1.3.6.1.4.1.326.2.6.1.1.1.6 integer read-only
The maximum number of slots available in the powerhub. Presently it could either be a 5, 10, or 15 slot chassis. This object is used only for PH7000. Enumeration: 'slots10': 2, 'slots15': 3, 'slots5': 1.
                               powerFailure 1.3.6.1.4.1.326.2.6.1.1.10.1
The powerFailure trap indicates that powerFailure occured in the particular powersupply unit.
                               boardFailure 1.3.6.1.4.1.326.2.6.1.1.10.2
The boardFailure trap indicates that intelligent card failure occured in the particular slot.
                     powerbits 1.3.6.1.4.1.326.2.6.1.2
                     asn9000 1.3.6.1.4.1.326.2.6.1.3
                 lsdcommon 1.3.6.1.4.1.326.2.6.2
                     alsystem 1.3.6.1.4.1.326.2.6.2.1
                         alChassisType 1.3.6.1.4.1.326.2.6.2.1.1 integer read-only
The model type of the PowerHub Enumeration: 'model3407': 11, 'model3406': 10, 'model3405': 9, 'model3404': 8, 'model3403': 7, 'model3402': 6, 'model3401': 5, 'model3420': 15, 'model3423': 18, 'model3422': 17, 'model7000': 30, 'model3425': 20, 'model3100': 1, 'model3424': 19, 'model3410': 12, 'model3411': 13, 'model3412': 14, 'model3300': 3, 'model5003': 23, 'model3200': 2, 'model8000': 34, 'model5001': 21, 'model3421': 16, 'model5002': 22, 'model5005': 25, 'model5004': 24, 'model5006': 26, 'model4000': 32, 'model6000': 31, 'model4100': 33, 'model3500': 4.
                         alMcpuRtVer 1.3.6.1.4.1.326.2.6.2.1.2 displaystring read-only
Runtime software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
                         alMcpuPromVer 1.3.6.1.4.1.326.2.6.2.1.3 displaystring read-only
PROM software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
                         alFcpuOneRtVer 1.3.6.1.4.1.326.2.6.2.1.4 displaystring read-only
Runtime software version of F-bus CPU for the first FDDI board.
                         alFcpuTwoRtVer 1.3.6.1.4.1.326.2.6.2.1.5 displaystring read-only
Runtime software version of F-bus CPU for the second FDDI board.
                         alFcpuOnePromVer 1.3.6.1.4.1.326.2.6.2.1.6 displaystring read-only
PROM software version of F-bus CPU for the first FDDI board.
                         alFcpuTwoPromVer 1.3.6.1.4.1.326.2.6.2.1.7 displaystring read-only
PROM software version of F-bus CPU for the second FDDI board.
                         alRcpuOneRtVer 1.3.6.1.4.1.326.2.6.2.1.8 displaystring read-only
Runtime software version of Ring CPU for the first FDDI board.
                         alRcpuTwoRtVer 1.3.6.1.4.1.326.2.6.2.1.9 displaystring read-only
Runtime software version of Ring CPU for the second FDDI board.
                         alRcpuOnePromVer 1.3.6.1.4.1.326.2.6.2.1.10 displaystring read-only
PROM software version of Ring CPU for the first FDDI board.
                         alRcpuTwoPromVer 1.3.6.1.4.1.326.2.6.2.1.11 displaystring read-only
PROM software version of Ring CPU for the second FDDI board.
                         alLastLoginFailureTimeDate 1.3.6.1.4.1.326.2.6.2.1.12 displaystring read-only
Time and date string of the last login session that failed.
                         alLastLoginFailureUserId 1.3.6.1.4.1.326.2.6.2.1.13 displaystring read-only
User id of the last login session that failed.
                         alLastLoginFailureReason 1.3.6.1.4.1.326.2.6.2.1.14 integer read-only
Reason code for the last login failure. Enumeration: 'invalidLoginId': 1, 'passwordMismatch': 2.
                         alLastLoginSourceAddress 1.3.6.1.4.1.326.2.6.2.1.15 displaystring read-only
Source address of the last login session that failed. The value would be either 'console' or ipaddress string of the telnet session.
                         alConsoleSyslogLevel 1.3.6.1.4.1.326.2.6.2.1.17 integer read-write
Level which generates a logging messsage for console port commands (telnet, tip, etc.); no messages if set to off(1). Enumeration: 'logEmerg': 2, 'off': 1, 'logAlert': 3, 'logCrit': 4, 'logWarning': 6, 'logErr': 5, 'logInfo': 8, 'logDebug': 9, 'logNotice': 7.
                         alSnmpSyslogLevel 1.3.6.1.4.1.326.2.6.2.1.18 integer read-write
Level which generates a logging messsage for snmp induced changes; no messages if set to off(1). Enumeration: 'logEmerg': 2, 'off': 1, 'logAlert': 3, 'logCrit': 4, 'logWarning': 6, 'logErr': 5, 'logInfo': 8, 'logDebug': 9, 'logNotice': 7.
                         alIlmiSyslogLevel 1.3.6.1.4.1.326.2.6.2.1.19 integer read-write
Level which generates a logging messsage for ilmi configuration changes; no messages if set to off(1). Enumeration: 'logEmerg': 2, 'off': 1, 'logAlert': 3, 'logCrit': 4, 'logWarning': 6, 'logErr': 5, 'logInfo': 8, 'logDebug': 9, 'logNotice': 7.
                         alSyslogHostType 1.3.6.1.4.1.326.2.6.2.1.20 integer read-write
Host which receives syslog messages: notSet(1) if no host is set or becomes unset; local(2) if messages go to console; ip(3) if messages go to a remote host Enumeration: 'ip': 3, 'notSet': 1, 'local': 2.
                         alSyslogHostIp 1.3.6.1.4.1.326.2.6.2.1.21 displaystring read-write
IP address of remote host which receives syslog messages; must be set if alSyslogHost is set to ip.
                         alSyslogHostIpFacility 1.3.6.1.4.1.326.2.6.2.1.22 integer read-write
Syslog facility to be assigned to all syslog messages. Default is daemon(1). Enumeration: 'daemon': 1, 'local5': 7, 'local4': 6, 'local7': 9, 'local6': 8, 'local1': 3, 'local0': 2, 'local3': 5, 'local2': 4.
                     albridge 1.3.6.1.4.1.326.2.6.2.2
                         alBridgeTable 1.3.6.1.4.1.326.2.6.2.2.1 no-access
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
                             alBridgeEntry 1.3.6.1.4.1.326.2.6.2.2.1.1 no-access
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
                                 alBridgeEntryAddress 1.3.6.1.4.1.326.2.6.2.2.1.1.1 macaddress read-only
The MAC address for which the bridge has forwarding and/or filtering information.
                                 alBridgeEntryPort 1.3.6.1.4.1.326.2.6.2.2.1.1.2 integer read-only
The port number of the port on which a frame having a source address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen.
                                 alBridgeEntryLink 1.3.6.1.4.1.326.2.6.2.2.1.1.3 integer read-only
The link number on the port on which a frame having as ource address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen. Only applies to the UTP port type.
                                 alBridgeEntryRule 1.3.6.1.4.1.326.2.6.2.2.1.1.4 integer read-only
The rule number that is applied to packets that are forwarded to or from this address.
                                 alBridgeEntryFlags 1.3.6.1.4.1.326.2.6.2.2.1.1.5 integer read-only
The status of this entry.
                         alBridgeTblClear 1.3.6.1.4.1.326.2.6.2.2.2 integer read-write
When set, clears the Bridge table.
                         alBrFlushCache 1.3.6.1.4.1.326.2.6.2.2.3 integer read-write
When set, flushes the cache.
                         alPortStatsTable 1.3.6.1.4.1.326.2.6.2.2.4 no-access
Per port statistics
                             portStatsEntry 1.3.6.1.4.1.326.2.6.2.2.4.1 no-access
Per port statistics entries.
                                 portStatsPort 1.3.6.1.4.1.326.2.6.2.2.4.1.1 integer read-only
Segment for which the statistics collected.
                                 portStatsPktsIn 1.3.6.1.4.1.326.2.6.2.2.4.1.2 counter read-only
Good packets received on the segment. Packets are listed regardless of packet type, or whether the packet is forwarded to another segment. Error packets are not listed.
                                 portStatsPktsOut 1.3.6.1.4.1.326.2.6.2.2.4.1.3 counter read-only
Packets transmitted on the segment. This statistic is incremented when a packet is scheduled for transmission, not when it is actually transmitted.
                                 portStatsOctetsIn 1.3.6.1.4.1.326.2.6.2.2.4.1.4 counter read-only
Good octets received on the segment. This statistic includes 8 octets per packet to account for the preamble.
                                 portStatsOctetsOut 1.3.6.1.4.1.326.2.6.2.2.4.1.5 counter read-only
Octets transmitted from the segment. This statistic is incremented when a packet is scheduled for transmission, not when it is actually transmitted. This statistic includes 8 octets per packet to account for the preamble.
                                 portStatsMulticastPktsIn 1.3.6.1.4.1.326.2.6.2.2.4.1.6 counter read-only
Broadcast multicast packets received on the segment. This statistic is incremented for each good broadcast or multicast packet received on the segment.
                                 portStatsMulticastPktsOut 1.3.6.1.4.1.326.2.6.2.2.4.1.7 counter read-only
Broadcast multicast packets transmitted from the segment. This statistic is incremented once for each broadcast or multicast packet scheduled for transmission on the segment.
                                 portStatsTableMisses 1.3.6.1.4.1.326.2.6.2.2.4.1.8 counter read-only
Packets received that have unknown destination addresses. When address learning is enabled, this statistic is usually incremented only for the first packet transmitted to a workstation or other device connected to the segment. After a reply is received, the device's source address is added to the bridging table.
                                 portStatsRcvBuffErrs 1.3.6.1.4.1.326.2.6.2.2.4.1.9 counter read-only
Incremented each time the hub detects an incoming packet but does not have a buffer in which to store the packet.
                                 portStatsXmitBuffErrs 1.3.6.1.4.1.326.2.6.2.2.4.1.10 counter read-only
Incremented each time the hub attempts to forward a packet to a busy destination segment whose output buffers all are full.
                                 portStatsTotalCollisions 1.3.6.1.4.1.326.2.6.2.2.4.1.11 counter read-only
The total number of collisions detected on the segment while attempting to transmit and receive packets. For FDDI segments, this statistic is always 0.
                                 portStatsRcvCollisions 1.3.6.1.4.1.326.2.6.2.2.4.1.12 counter read-only
The number of collisions detected on the segment while listening for incoming packets. This statistic is only available for UTP segments. For segments on other module types, this statistic is always 0.
                                 portStatsXmitCollisions 1.3.6.1.4.1.326.2.6.2.2.4.1.13 counter read-only
The number of collisions detected on the segment while attempting to transmit packets. For FDDI segments, this statistic is always 0.
                                 portStatsXmitQLen 1.3.6.1.4.1.326.2.6.2.2.4.1.14 counter read-only
The number of outgoing packets in the transmit queue. These packets have been scheduled for transmission, but have not been transmitted yet.
                                 portStatsPeakUtilization 1.3.6.1.4.1.326.2.6.2.2.4.1.15 counter read-only
The segment's maximum utilization during a one-second interval since the statistics last were cleared. For Ethernet segments, the current utilization is calculated as follows: Once per second, the current one- second utilization is computed as (total # octets) x (8 bits/octets) / 10 Mb/s. The peak utilization is then set to the maximum of the current one-second utilization and the previous peak utilization. NOTE: Total # octets is all octets transmitted and received on the segment during the previous second, including 8 octets of preamble per packet. The Ethernet rate is 10Mb.
                                 portStatsCurrUtilization 1.3.6.1.4.1.326.2.6.2.2.4.1.16 counter read-only
For Ethernet segments, the current utilization is calculated as follows: Once per second, the current one-second utilization is computed as (total # octets) x (8 bits/octets) / 10 Mb/s. NOTE: Total # octets is all octets transmitted and received on the segment during the previous second, including 8 octets of preamble per packet. The Ethernet rate is 10Mb.
                                 portStatsLossOfCarrier 1.3.6.1.4.1.326.2.6.2.2.4.1.17 counter read-only
Indicates that an AUI segment has no cable attached, or the cable or transceiver is faulty.
                                 portStatsExcessRetries 1.3.6.1.4.1.326.2.6.2.2.4.1.18 counter read-only
Incremented whenever all of 15 attempts to transmit a single packet cause collisions. This can happen in very busy networks, or when no cable is attached to an enabled BNC port.
                         alBridgeStatsClear 1.3.6.1.4.1.326.2.6.2.2.5 integer read-write
When set, clears the statistics for the bridge. When not set, value 0 is returned.
                         alBridgePPControl 1.3.6.1.4.1.326.2.6.2.2.6 integer read-write
When set to 3 , disables the port to port collection of the stats; when set to 1, enables the port to port stats collection; when set to 2, clears the port to port stats. Enumeration: 'clear': 2, 'enable': 1, 'disable': 3.
                         alPortToPortTable 1.3.6.1.4.1.326.2.6.2.2.7 no-access
Statistics for port to port traffic.
                             portToPortEntry 1.3.6.1.4.1.326.2.6.2.2.7.1 no-access
Statistics for port to port traffic
                                 alPPSourcePort 1.3.6.1.4.1.326.2.6.2.2.7.1.1 integer read-only
Source port number
                                 alPPDestinationPort 1.3.6.1.4.1.326.2.6.2.2.7.1.2 integer read-only
Destination port number
                                 portToPortPackets 1.3.6.1.4.1.326.2.6.2.2.7.1.3 integer read-only
Port to port packets.
                                 portToPortOctets 1.3.6.1.4.1.326.2.6.2.2.7.1.4 integer read-only
Port to port octets.
                         alPortConfigTable 1.3.6.1.4.1.326.2.6.2.2.8 no-access
Per port configuration for configuring Source and Destination Rules etc.
                             portConfigEntry 1.3.6.1.4.1.326.2.6.2.2.8.1 no-access
Per port configuration.
                                 portConfigPort 1.3.6.1.4.1.326.2.6.2.2.8.1.1 integer read-only
The port number for this table entry
                                 portConfigSrcRule 1.3.6.1.4.1.326.2.6.2.2.8.1.2 integer read-write
Source Rule for the port number identified by the instance of portConfigPort
                                 portConfigDstRule 1.3.6.1.4.1.326.2.6.2.2.8.1.3 integer read-write
Destination Rule for the port number identified by the instance of portConfigPort
                                 portConfigBlockLearnedEntries 1.3.6.1.4.1.326.2.6.2.2.8.1.4 integer read-write
When set to True (1), the port identified by the instance of portConfigPort will block the learned entries; if set to False (2) the port will not block the learned entries Enumeration: 'false': 2, 'true': 1.
                         alBridgeIpBridging 1.3.6.1.4.1.326.2.6.2.2.9 integer read-write
When set to enable(1), enables the IP bridging and if set to disable(2), disables the IP bridging. Enumeration: 'enable': 1, 'disable': 2.
                         alBrTemplateTable 1.3.6.1.4.1.326.2.6.2.2.10 no-access
Per template information
                               brTemplateEntry 1.3.6.1.4.1.326.2.6.2.2.10.1 no-access
Template entry.
                                   brTemplateNumber 1.3.6.1.4.1.326.2.6.2.2.10.1.1 integer read-only
The number of the template with which it is identified.
                                   brTemplateOffset 1.3.6.1.4.1.326.2.6.2.2.10.1.2 integer read-write
A displacement, in octets, from the beginning of the packet. This must be a multiple of 4 in the range from 0 to 124 decimal. A value of -1 will delete the entry
                                   brTemplateMask 1.3.6.1.4.1.326.2.6.2.2.10.1.3 displaystring read-write
A 4-byte (32-bit) number, normally specified as eight hexadecimal digits (00000000 - ffffffff) Description: The bytes in the mask are numbered from 0 to 3, starting with the high-order byte (big-endian format). Each byte of the mask is ANDed with the octet in the packet at displacement 'offset + i' to form a 4-byte 'masked value'.
                                   brTemplateComparator 1.3.6.1.4.1.326.2.6.2.2.10.1.4 displaystring read-write
A 4-byte number, usually specified as eight hexadecimal digits (00000000 - ffffffff) Description: If the masked value defined above equals the comparator, then the template returns a value of 'true'; otherwise, it returns a value of 'false'.
                                   brTemplateOption 1.3.6.1.4.1.326.2.6.2.2.10.1.5 integer read-write
Setting this value to 0 assume all 32 bits mask and comparator specified; value 1 assume half-word (2 bytes) qunatity; and value 2 assume single-byte quantity.
                         alBrRuleTable 1.3.6.1.4.1.326.2.6.2.2.11 no-access
Per rule information
                               brRuleEntry 1.3.6.1.4.1.326.2.6.2.2.11.1 no-access
Rule entry.
                                   brRuleNumber 1.3.6.1.4.1.326.2.6.2.2.11.1.1 integer read-only
A rule number in the range 101-162. You can define up to 62 rules.
                                   brRuleStatement 1.3.6.1.4.1.326.2.6.2.2.11.1.2 displaystring read-write
Specifies the templates and the logical operators that make up the rule. Rule statements consist of rule numbers joined by the following logical operators: Operator Means... & AND | OR ~ NOT Rule statements are interpreted from left to right. Use parentheses to group expressions. You can use up to eight sets of parentheses to group template numbers and logical operators. The total maximum number of characters, including blanks, is 64.
                         alBrRuleToNodeTable 1.3.6.1.4.1.326.2.6.2.2.12 no-access
Rules to specific node.
                               alBrRuleToNodeEntry 1.3.6.1.4.1.326.2.6.2.2.12.1 no-access
Rule node entry.
                                   brRuleToNodePort 1.3.6.1.4.1.326.2.6.2.2.12.1.1 integer read-write
The number of the port for which this rule applies
                                   brRuleToNodeMacAddr 1.3.6.1.4.1.326.2.6.2.2.12.1.2 physaddress read-write
The source MAC address
                                   brRuleToNodeRule 1.3.6.1.4.1.326.2.6.2.2.12.1.3 integer read-write
The rule number that applies to this entry.
                         alBrGroupTable 1.3.6.1.4.1.326.2.6.2.2.13 no-access
Bridge group table.
                               alBrGroupEntry 1.3.6.1.4.1.326.2.6.2.2.13.1 no-access
Bridge group entry.
                                   brGroupNumber 1.3.6.1.4.1.326.2.6.2.2.13.1.1 integer read-only
The group number by which the group is identified with.
                                   brGroupPortsMask 1.3.6.1.4.1.326.2.6.2.2.13.1.2 displaystring read-write
The ports associated with the group number identified by the instance of brGroupNumber. The mask is ascii segments separated by commas. A value of -1 would invalidate the appropriate group.
                                   brGroupName 1.3.6.1.4.1.326.2.6.2.2.13.1.3 displaystring read-write
The name of the group for which this entry applies
                         alBridgeSTPControl 1.3.6.1.4.1.326.2.6.2.2.14 integer read-write
When set to 2 , disables the spanning tree. set to 1, enables the spanning tree. Enumeration: 'enable': 1, 'disable': 2.
                         alPortStateTable 1.3.6.1.4.1.326.2.6.2.2.15 no-access
Per port state information about spanning tree, dignostics and management.
                               portStateEntry 1.3.6.1.4.1.326.2.6.2.2.15.1 no-access
Port state entry.
                                   portStatePort 1.3.6.1.4.1.326.2.6.2.2.15.1.1 integer read-only
The port number for this table entry
                                   portStateDiag 1.3.6.1.4.1.326.2.6.2.2.15.1.2 integer read-only
The diagnostics state of the port Enumeration: 'unknown': 3, 'bad': 2, 'good': 1.
                                   portStateMgmt 1.3.6.1.4.1.326.2.6.2.2.15.1.3 integer read-only
The management state of the port Enumeration: 'disabled': 2, 'enabled': 1.
                                   portStateStp 1.3.6.1.4.1.326.2.6.2.2.15.1.4 integer read-only
The spanning tree state of the port.
                                   portStatePortName 1.3.6.1.4.1.326.2.6.2.2.15.1.5 displaystring read-only
The name of this port
                     almgmt 1.3.6.1.4.1.326.2.6.2.3
                         alAutoPortStateTable 1.3.6.1.4.1.326.2.6.2.3.1 no-access
auto port stat table
                             autoportStateEntry 1.3.6.1.4.1.326.2.6.2.3.1.1 no-access
auto port stat entry.
                                 autoPortStatePort 1.3.6.1.4.1.326.2.6.2.3.1.1.1 integer read-only
The port number for this table entry
                                 autoPortState 1.3.6.1.4.1.326.2.6.2.3.1.1.2 integer read-write
Whether the auto port state detection is turned on or not. Enumeration: 'enable': 1, 'disable': 2.
                                 autoPortStateThreshold 1.3.6.1.4.1.326.2.6.2.3.1.1.3 integer read-write
Corresponding to the threshold parameter of the autoportstate command.
                         alLinkStatsCollect 1.3.6.1.4.1.326.2.6.2.3.2 integer read-write
When set to enable(1), per link stats collection is enabled; when set to disable(0), the per link stats are not collected.
                         alLinkStatsClear 1.3.6.1.4.1.326.2.6.2.3.3 integer read-write
When set, clears the link stats; otherwise value 0 is returned.
                         alLinkStatsTable 1.3.6.1.4.1.326.2.6.2.3.4 no-access
Per link stats table
                             linkStatsEntry 1.3.6.1.4.1.326.2.6.2.3.4.1 read-write
link stats entry.
                                 linkStatsPort 1.3.6.1.4.1.326.2.6.2.3.4.1.1 integer read-only
Port Number
                                 linkStatsLink 1.3.6.1.4.1.326.2.6.2.3.4.1.2 counter read-only
Link Number
                                 linkStatsPktsIn 1.3.6.1.4.1.326.2.6.2.3.4.1.3 counter read-only
Pkts In - corresponds to pi
                                 linkStatsOctetsIn 1.3.6.1.4.1.326.2.6.2.3.4.1.4 counter read-only
Octets In - corresponds to oi
                                 linkStatsBMCastPktsIn 1.3.6.1.4.1.326.2.6.2.3.4.1.5 counter read-only
Bmcast Pks In - corresponds to bpi
                                 linkStatsGiantPkts 1.3.6.1.4.1.326.2.6.2.3.4.1.6 counter read-only
Giant Pkts - corresponds to gp
                                 linkStatsFrameErrs 1.3.6.1.4.1.326.2.6.2.3.4.1.7 counter read-only
Frame Errors - corresponds to fa
                                 linkStatsFCSErrs 1.3.6.1.4.1.326.2.6.2.3.4.1.8 counter read-only
FCS Errors corresponds to fcs
                                 linkStatsCodingErrors 1.3.6.1.4.1.326.2.6.2.3.4.1.9 counter read-only
This Counter is incremented when the receiver (RX) port detects an invalid symbol in the incoming code sent by the TX port using symbol mode.
                                 linkStatsDataRateMismatch 1.3.6.1.4.1.326.2.6.2.3.4.1.10 counter read-only
This counter is incremented by one for each frame received on this port that meets all of the following conditions: 1) The Collision Event signal is not asserted 2) The Activity duration is greater than ValidPacketMinTime 3) The frequency (data rate) is detectably mismatched from the local transmit frequency
                                 linkStatsJabbers 1.3.6.1.4.1.326.2.6.2.3.4.1.11 counter read-only
This Counter is incremented for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer
                                 linkStatsShortEvents 1.3.6.1.4.1.326.2.6.2.3.4.1.12 counter read-only
This counter is incremented for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime.
                                 linkStatsRunts 1.3.6.1.4.1.326.2.6.2.3.4.1.13 counter read-only
An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the shortEvents counter or the runts counter but not both
                                 linkStatsPortCollision 1.3.6.1.4.1.326.2.6.2.3.4.1.14 counter read-only
This counter is incremented for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted.
                                 linkStatsLateCollision 1.3.6.1.4.1.326.2.6.2.3.4.1.15 counter read-only
This counter is incremented for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE while the ActivityDuration is greater than the LAteEventThreshold.
                                 linkStatsAutoPartition 1.3.6.1.4.1.326.2.6.2.3.4.1.16 counter read-only
This counter is incremented each time the repeater has automatically partitioned this port
                                 linkStatsIsolates 1.3.6.1.4.1.326.2.6.2.3.4.1.17 counter read-only
This counter is incremented whenever the port detects two consecutive carrier integrity false carriers.
                                 linkStatsSaFieldChanges 1.3.6.1.4.1.326.2.6.2.3.4.1.18 counter read-only
This counter is incremented for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed.
                                 linkStatsLastSa 1.3.6.1.4.1.326.2.6.2.3.4.1.19 macaddress read-only
This object is the SourceAddress of the last readable frame received by this port.
                         alLinkControlTable 1.3.6.1.4.1.326.2.6.2.3.5 no-access
Per link stats table
                             linkControlEntry 1.3.6.1.4.1.326.2.6.2.3.5.1 read-write
link control entry.
                                 linkControlPort 1.3.6.1.4.1.326.2.6.2.3.5.1.1 integer read-only
Port number for this entry.
                                 linkControlLink 1.3.6.1.4.1.326.2.6.2.3.5.1.2 integer read-only
Link number for this entry.
                                 linkControlEnlState 1.3.6.1.4.1.326.2.6.2.3.5.1.3 integer read-write
Setting the value of this object to Enable (1) will enable the link and setting to Disable(2) will disable the link. Enumeration: 'enable': 1, 'disable': 2.
                                 linkControlLinkTest 1.3.6.1.4.1.326.2.6.2.3.5.1.4 integer read-only
Link test status for the link; corresponds to lt option of the lkd command.
                                 linkControlPartition 1.3.6.1.4.1.326.2.6.2.3.5.1.5 integer read-only
Partitioning state of the link
                                 linkControlPolarity 1.3.6.1.4.1.326.2.6.2.3.5.1.6 integer read-only
Polarity of the link
                         alPortLinkTable 1.3.6.1.4.1.326.2.6.2.3.6 no-access
Per port link type
                             portLinkEntry 1.3.6.1.4.1.326.2.6.2.3.6.1 no-access
port link entry.
                                 portLinkPort 1.3.6.1.4.1.326.2.6.2.3.6.1.1 integer read-only
The port number for which the port type is to be set
                                 portLinkType 1.3.6.1.4.1.326.2.6.2.3.6.1.2 integer read-write
The type of port Enumeration: 'bnct': 3, 'fiber': 5, 'aui': 1, 'unknown': 6, 'utp': 4, 'bnc': 2.
                         alFiberStatsTable 1.3.6.1.4.1.326.2.6.2.3.7 no-access
Per port fiber stats and Fiber Security
                             fiberStatsEntry 1.3.6.1.4.1.326.2.6.2.3.7.1 no-access
fiber stat entry.
                                 fiberStatsPort 1.3.6.1.4.1.326.2.6.2.3.7.1.1 integer read-only
The fiber port for which the stats are requested or the Fiber violation is set
                                 fiberAuiStatus 1.3.6.1.4.1.326.2.6.2.3.7.1.2 integer read-only
The fiber aui status for the port that is specified by the instance of fiberStatsPort
                                 fiberSecurityViolation 1.3.6.1.4.1.326.2.6.2.3.7.1.3 integer read-write
The fiber port for which the stats are requested or the Fiber violation is set Enumeration: 'ignore': 2, 'clear': 3, 'detect': 1.
                         alPortMonitorClose 1.3.6.1.4.1.326.2.6.2.3.8 integer read-write
Setting the value to close(1), will turn the port monitoring off.
                         alPortMonitorTable 1.3.6.1.4.1.326.2.6.2.3.9 no-access
port monitor table.
                             portMonitorEntry 1.3.6.1.4.1.326.2.6.2.3.9.1 no-access
port monitor entry.
                                 portMonSrcPort 1.3.6.1.4.1.326.2.6.2.3.9.1.1 integer read-only
The traffic to/from this port will be monitored on the portMonDstPort
                                 portMonDstPort 1.3.6.1.4.1.326.2.6.2.3.9.1.2 integer read-only
The traffic to/from portMonSrcPort will be monitored on this port
                                 portMonTrafficType 1.3.6.1.4.1.326.2.6.2.3.9.1.3 integer read-write
Setting this value to 1, will let the port monitor monitor forwarded traffic; setting to 8 means the forwarded traffic will not be monitored. Enumeration: 'all': 7, 'incoming': 2, 'forwarded': 1, 'stopmonitoring': 8, 'generated': 4, 'incomingandgenerated': 6, 'forwardedandgenerated': 5, 'forwardedandincoming': 3.
                         alReboot 1.3.6.1.4.1.326.2.6.2.3.10 integer read-write
Setting the value to Reboot(1), will reboot the PowerHub.
                         alPortMonitorViewTable 1.3.6.1.4.1.326.2.6.2.3.11 no-access
port monitor view table.
                               portMonitorViewEntry 1.3.6.1.4.1.326.2.6.2.3.11.1 no-access
port monitor view entry.
                                   portMonViewSrcPort 1.3.6.1.4.1.326.2.6.2.3.11.1.1 integer read-only
The traffic from this port to the port designated by portMonViewDstPort will be monitored on portMonViewMonitorPort.
                                   portMonViewDstPort 1.3.6.1.4.1.326.2.6.2.3.11.1.2 integer read-only
The traffic to this port from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort.
                                   portMonViewMonitorPort 1.3.6.1.4.1.326.2.6.2.3.11.1.3 displaystring read-write
The traffic to portMonViewDstPort from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort. The mask is ascii, segments separated by commas.
                         alCfgLocalMediaScope 1.3.6.1.4.1.326.2.6.2.3.12 integer read-only
This object display the types of local media currently available on the PH for storing files. The PH4000 and PH6000 do not support floppy whereas the PH3000 and PH5000 do not support flash. The flash is optional on PH6000 & PH7000. All models do support tftpHost save options. Depending on the value of this object, the user can specify the appropriate filename and the media type in other objects for doing the save operation. Enumeration: 'floppy': 1, 'none': 4, 'flash': 2, 'floppyAndFlash': 3.
                         alCfgMediaName 1.3.6.1.4.1.326.2.6.2.3.13 integer read-write
This object specify the medium name to which the the powerhub will save the configurations. The value 'none' is returned when user have not set the valid save medium. Save operation cannot be performed when value is set to 'none'. Enumeration: 'floppy': 1, 'none': 4, 'flash': 2, 'tftpHost': 3.
                         alCfgTftpHostAddr 1.3.6.1.4.1.326.2.6.2.3.14 ipaddress read-write
This object specify the IP address of the tftp host system to which the configs get saved when the object alCfgMediaName is set with value tftpHost(3).
                         alCfgFileName 1.3.6.1.4.1.326.2.6.2.3.15 displaystring read-write
This object specify the configuration filename to which the PH will save the configuration. Depending on the medium (floppy, flash, or tftpHost) in which the saving will be done, the filename have to be set correctly. For example, the filename for floppy and flash medium cannot exceed 8 characters. The filnames can be appended with the optional dot character followed by 3 character extension. The filenames for tftp host should have been pre-created on the host and it should be writable by the PH. All tftp file access restrictions apply.
                         alCfgSaveOp 1.3.6.1.4.1.326.2.6.2.3.16 integer read-write
Save config operation can be performed only when this object is set to value '1'. This field returns a dummy value 100 for get operations.
                           alLoginFailure 1.3.6.1.4.1.326.2.6.2.10.1
The login failure trap indicates that the login failed due to some error condition during the login process.