POWERCONNECT5012-MIB: View SNMP OID List / Download MIB

VENDOR: DELL INC.


 Home MIB: POWERCONNECT5012-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dell 1.3.6.1.4.1.674
         dellLan 1.3.6.1.4.1.674.10895
                     powerconnect5012 1.3.6.1.4.1.674.10895.2
                         dellCommGroup 1.3.6.1.4.1.674.10895.2.1
                             commTable 1.3.6.1.4.1.674.10895.2.1.1 no-access
A list of SNMP Community Entries
                                 commEntry 1.3.6.1.4.1.674.10895.2.1.1.1 no-access
A list of SNMP Community properties
                                     commIndex 1.3.6.1.4.1.674.10895.2.1.1.1.1 integer read-only
An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
                                     commName 1.3.6.1.4.1.674.10895.2.1.1.1.2 displaystring read-write
The name of this SNMP Community Entry.
                                     commGet 1.3.6.1.4.1.674.10895.2.1.1.1.3 integer read-write
The GET permission for the community. A (1) indicates a GET enable. A (2) indicates a GET disable. Enumeration: 'disabled': 2, 'enabled': 1.
                                     commSet 1.3.6.1.4.1.674.10895.2.1.1.1.4 integer read-write
The SET permission for the community. A (1) indicates a SET enable. A (2) indicates a SET disable. Enumeration: 'disabled': 2, 'enabled': 1.
                                     commTrap 1.3.6.1.4.1.674.10895.2.1.1.1.5 integer read-write
The TRAP permission for the community. A (1) indicates a TRAP enable. A (2) indicates a TRAP disable. Enumeration: 'disabled': 2, 'enabled': 1.
                                     commStatus 1.3.6.1.4.1.674.10895.2.1.1.1.6 integer read-write
The RowStatus for the community entry.
                         dellHostGroup 1.3.6.1.4.1.674.10895.2.2
                             hostTable 1.3.6.1.4.1.674.10895.2.2.1 no-access
A list of SNMP Trusted Host Entries
                                 hostEntry 1.3.6.1.4.1.674.10895.2.2.1.1 no-access
A list of SNMP Host properties
                                     hostIndex 1.3.6.1.4.1.674.10895.2.2.1.1.1 integer read-only
An index that uniquely identifies an entry in the Host Table. Sixteen entries are currently supported.
                                     hostName 1.3.6.1.4.1.674.10895.2.2.1.1.2 displaystring read-write
The name of this Host Entry.
                                     hostIP 1.3.6.1.4.1.674.10895.2.2.1.1.3 ipaddress read-write
The IP Address for the host.
                                     hostComm 1.3.6.1.4.1.674.10895.2.2.1.1.4 displaystring read-write
The name of the community this host belongs to.
                                     hostStatus 1.3.6.1.4.1.674.10895.2.2.1.1.5 integer read-write
The RowStatus for the community entry.
                             hostAuthorization 1.3.6.1.4.1.674.10895.2.2.2 integer read-write
If enabled, the host must be in the hostTable in order to access the device via SNMP. Enumeration: 'disabled': 2, 'enabled': 1.
                         dellMiscGroup 1.3.6.1.4.1.674.10895.2.3
                             miscBaud 1.3.6.1.4.1.674.10895.2.3.1 integer read-only
The Serial port BAUD Rate.
                             miscReset 1.3.6.1.4.1.674.10895.2.3.2 integer read-write
Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing. Enumeration: 'reset': 1, 'noop': 2.
                             miscStatisticsReset 1.3.6.1.4.1.674.10895.2.3.3 integer read-write
Resets the units statistics. A (1) resets the unit, a (2) does nothing. Enumeration: 'reset': 1, 'noop': 2.
                             miscSwitchOperState 1.3.6.1.4.1.674.10895.2.3.4 integer read-only
Global operation state of the switch. Enumeration: 'ok': 3, 'unknown': 2, 'other': 1, 'critical': 5, 'noncritical': 4, 'nonrecoverable': 6.
                         dellSpanGroup 1.3.6.1.4.1.674.10895.2.4
                             spanOnOff 1.3.6.1.4.1.674.10895.2.4.1 integer read-write
Enable/Disable Spanning Tree. A (1) enables, a (2) disables. Enumeration: 'disabled': 2, 'enabled': 1.
                         dellConfigGroup 1.3.6.1.4.1.674.10895.2.11
                               configVerSwPrimary 1.3.6.1.4.1.674.10895.2.11.1 displaystring read-only
The software image version string
                               configVerHwChipSet 1.3.6.1.4.1.674.10895.2.11.2 displaystring read-only
The hardware chipset version string
                               configBootMode 1.3.6.1.4.1.674.10895.2.11.3 integer read-write
Defines the method used for downloading the image when reset. Enumeration: 'net': 2, 'flash': 1.
                               configBootFtpServerIp 1.3.6.1.4.1.674.10895.2.11.4 ipaddress read-write
The FTP server's IP address used for downloading the boot image
                               configBootImageFileName 1.3.6.1.4.1.674.10895.2.11.5 displaystring read-write
The path and filename of the boot image to download
                               configPortTable 1.3.6.1.4.1.674.10895.2.11.6 no-access
A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces.
                                   configPortEntry 1.3.6.1.4.1.674.10895.2.11.6.1 no-access
An enterprise specific interface entry.
                                       configPort 1.3.6.1.4.1.674.10895.2.11.6.1.1 integer read-write
A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
                                       configPortDuplex 1.3.6.1.4.1.674.10895.2.11.6.1.3 integer read-write
The port's duplex desired state. Enumeration: 'half-duplex': 1, 'full-duplex': 2.
                                       configPortRuntFilt 1.3.6.1.4.1.674.10895.2.11.6.1.4 integer read-write
Defines whether the port will drop runt packets Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortSrcSecurity 1.3.6.1.4.1.674.10895.2.11.6.1.5 integer read-write
The desired state for an interface's source security. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortDataRate 1.3.6.1.4.1.674.10895.2.11.6.1.6 integer read-write
The port's desired transmission data rate. Enumeration: 'rate10Meg': 1, 'rate1Gig': 4, 'rate100Meg': 2.
                                       configForwardingMode 1.3.6.1.4.1.674.10895.2.11.6.1.7 integer read-write
Indicates whether the packets will receive the entire packet before forwarding. 'store-and-forward' receives the entire packet before forwarding. 'cut-through' may forward the packet before the entire packet is received. Enumeration: 'store-and-forward': 1, 'cut-through': 2.
                                       configPortDuplexOper 1.3.6.1.4.1.674.10895.2.11.6.1.8 integer read-only
The port's duplex state. Enumeration: 'half-duplex': 1, 'full-duplex': 2.
                                       configPortDataRateOper 1.3.6.1.4.1.674.10895.2.11.6.1.9 integer read-only
The port's transmission data rate. Enumeration: 'rate10Meg': 1, 'rate1Gig': 4, 'rate100Meg': 2.
                                       configPortStateOper 1.3.6.1.4.1.674.10895.2.11.6.1.10 integer read-only
The port's current state. Enumeration: 'disabled': 1, 'learning': 4, 'forwarding': 5, 'blocking': 2, 'listening': 3.
                                       configPortFlowControl 1.3.6.1.4.1.674.10895.2.11.6.1.11 integer read-write
The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortDefaultVlanId 1.3.6.1.4.1.674.10895.2.11.6.1.12 integer read-write
The port will add this vlan id tag to any incoming packet which is lacking a vlan id tag.
                                       configPortComments 1.3.6.1.4.1.674.10895.2.11.6.1.13 displaystring read-write
May contain any comments related to a given port such as a user name or LAN segment.
                                       configPortAutoNegotiation 1.3.6.1.4.1.674.10895.2.11.6.1.14 integer read-write
The port will perform auto-negotiation to determine the port's duplex and data rate. When auto-negotiation is enabled, the negotiated duplex and data rate can be determined by configPortDuplexOper and configPortDataRateOper mib objects respectively. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortHOLBlocking 1.3.6.1.4.1.674.10895.2.11.6.1.15 integer read-write
When enabled, the port will prevent head-of-line blocking from occuring. If the current port is to forward a packet to a port which is beleived to be blocked, the packet will be dropped instead of forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortFlowControlOper 1.3.6.1.4.1.674.10895.2.11.6.1.16 integer read-only
The port's current flow control state. Enumeration: 'disabled': 2, 'enabled': 1.
                                       configPortGBIC 1.3.6.1.4.1.674.10895.2.11.6.1.17 integer read-write
Port Type.
                                       configPortFastLink 1.3.6.1.4.1.674.10895.2.11.6.1.18 integer read-write
The port's FastLink option. Enumeration: 'disabled': 1, 'enabled': 2.
                                       configPortPriority 1.3.6.1.4.1.674.10895.2.11.6.1.19 integer read-write
The port's current flow control state. Enumeration: 'high': 2, 'normal': 1.
                               configRmonOnOff 1.3.6.1.4.1.674.10895.2.11.7 integer read-write
Enable or disable Remote Montioring, RMON. Enumeration: 'disabled': 2, 'enabled': 1.
                               configMirroringOnOff 1.3.6.1.4.1.674.10895.2.11.8 integer read-write
Enable or disable port mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                               configMirrorSrc 1.3.6.1.4.1.674.10895.2.11.9 integer read-write
When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled.
                               configMirrorMon 1.3.6.1.4.1.674.10895.2.11.10 integer read-write
When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
                               configIpAssignmentMode 1.3.6.1.4.1.674.10895.2.11.12 integer read-write
Indicates whether the device address is assigned by the user (manual), BootP, or DHCP. Enumeration: 'dhcp': 3, 'manual': 1, 'bootP': 2.
                               configPhysAddress 1.3.6.1.4.1.674.10895.2.11.13 macaddress read-only
The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
                               configPasswordUser 1.3.6.1.4.1.674.10895.2.11.14 displaystring read-write
The user password.
                               configPasswordAdmin 1.3.6.1.4.1.674.10895.2.11.15 displaystring read-write
The adminstrator password
                               configIpAddress 1.3.6.1.4.1.674.10895.2.11.16 ipaddress read-write
The IP Address for the RDU box.
                               configNetMask 1.3.6.1.4.1.674.10895.2.11.17 ipaddress read-write
The network mask for the RDU box.
                               configGateway 1.3.6.1.4.1.674.10895.2.11.18 ipaddress read-write
The Gatway Address for the RDU box.
                               configSave 1.3.6.1.4.1.674.10895.2.11.19 integer read-write
Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing. Enumeration: 'save': 1, 'noop': 2.
                               configVerifyPassword 1.3.6.1.4.1.674.10895.2.11.20 displaystring read-write
Verify the password is valid. If invalid a BAD_VALUE error is returned.
                               configVerBootRomImage 1.3.6.1.4.1.674.10895.2.11.21 displaystring read-only
The Boot ROM version string
                               configRestoreDefaults 1.3.6.1.4.1.674.10895.2.11.22 integer read-write
Restores the configuration of the unit to the original settings. Enumeration: 'restore': 1, 'noop': 2.
                               configIGMPOnOff 1.3.6.1.4.1.674.10895.2.11.23 integer read-write
Enable or disable the IGMP protocol within the switch. Enumeration: 'disabled': 2, 'enabled': 1.
                               configWebOnOff 1.3.6.1.4.1.674.10895.2.11.24 integer read-write
Enable or disable the Web Interface. Enumeration: 'disabled': 2, 'enabled': 1.
                               configHighPriorityOptimization 1.3.6.1.4.1.674.10895.2.11.25 integer read-write
Enable or disable high priority optimization. Enumeration: 'disabled': 2, 'enabled': 1.
                               configDynamicAddressLearning 1.3.6.1.4.1.674.10895.2.11.26 integer read-write
The ablility to learn dynamic addresses automatically. With this parameter disabled, a new address detected on a port will cause that port to be disabled, force a configuration save, and issue a trap alerting management stations of the intrusion. Enumeration: 'disabled': 2, 'enabled': 1.
                               configUserAuthenticationMode 1.3.6.1.4.1.674.10895.2.11.27 integer read-write
Determines whether the user password will be authenticated by the switch, a remote RADIUS server, or some combination of the two. Enumeration: 'remote': 4, 'remoteThenLocal': 3, 'local': 1, 'localThenRemote': 2.
                               configRadiusServerIpAddress 1.3.6.1.4.1.674.10895.2.11.28 ipaddress read-write
The IP Address of the RADIUS server used for remote user authentication.
                               configRadiusSharedSecret 1.3.6.1.4.1.674.10895.2.11.29 displaystring read-write
A string of characters used in the RADIUS password encryption process.
                               configTelnetConsole 1.3.6.1.4.1.674.10895.2.11.30 integer read-write
Enable or disable the telnet console. Enumeration: 'disabled': 2, 'enabled': 1.
                               configDiffServTable 1.3.6.1.4.1.674.10895.2.11.31 no-access
A list of DSCP Priorities.
                                     configDiffServEntry 1.3.6.1.4.1.674.10895.2.11.31.1 no-access
An enterprise specific DSCP entry.
                                         configDiffServDSCP 1.3.6.1.4.1.674.10895.2.11.31.1.1 integer read-only
A DSCP value.
                                         configDiffServPriority 1.3.6.1.4.1.674.10895.2.11.31.1.2 integer read-write
The DSCP's current priority setting. Enumeration: 'high': 2, 'normal': 1.
                               configTftpServerIpAddress 1.3.6.1.4.1.674.10895.2.11.32 ipaddress read-write
The IP Address of the tftp server used to upload and download configuration files. This object is to be used in conjunction with configTftpServerFileName and configTftpOperation.
                               configTftpServerFileName 1.3.6.1.4.1.674.10895.2.11.33 displaystring read-write
The filename, including the path, used to store or retrieve a configuration file from the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpOperation.
                               configTftpOperation 1.3.6.1.4.1.674.10895.2.11.34 integer read-write
The tftp operation to perform. Either download a configuration to the unit or upload the current configuration to the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpServerFileName. Enumeration: 'download': 1, 'upload': 2.
                               configIpFilter 1.3.6.1.4.1.674.10895.2.11.35 integer read-write
Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable. Enumeration: 'disabled': 2, 'enabled': 1.
                               configIpFilterTable 1.3.6.1.4.1.674.10895.2.11.36 no-access
A list of IP addresses allowed access to this device.
                                     configIpFilterEntry 1.3.6.1.4.1.674.10895.2.11.36.1 no-access
An enterprise specific IP filter entry.
                                         configIpFilterIpAddress 1.3.6.1.4.1.674.10895.2.11.36.1.1 ipaddress read-only
An IP address which is allowed access to this device.
                                         configIpFilterStatus 1.3.6.1.4.1.674.10895.2.11.36.1.2 integer read-write
The status of an entry in the IP filter Table. Only a subset of the rowstatus variables (active, destroy) are available. Enumeration: 'active': 1, 'destroy': 6.
                         dellVlanGroup 1.3.6.1.4.1.674.10895.2.13
                               vlanTable 1.3.6.1.4.1.674.10895.2.13.1 no-access
A list of the VLANs
                                   vlanEntry 1.3.6.1.4.1.674.10895.2.13.1.1 no-access
A VLAN entry containing the VLAN id and name.
                                       vlanId 1.3.6.1.4.1.674.10895.2.13.1.1.1 integer read-only
The VLAN identifier. A maximum of 16 VLANs is supported. The value must be from 0 to 4095.
                                       vlanName 1.3.6.1.4.1.674.10895.2.13.1.1.2 displaystring read-write
The VLAN name associated with the VLAN Id.
                                       vlanStatus 1.3.6.1.4.1.674.10895.2.13.1.1.3 integer read-write
The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4.
                               vlanPortTable 1.3.6.1.4.1.674.10895.2.13.2 no-access
A list of ports and their associated VLAN.
                                   vlanPortEntry 1.3.6.1.4.1.674.10895.2.13.2.1 no-access
Information pertaining to an individual port regarding to which VLAN it belongs.
                                       vlanPortPortId 1.3.6.1.4.1.674.10895.2.13.2.1.1 integer read-only
A port identifier that is in the range of 1 to ifNumber.
                                       vlanPortVlanId 1.3.6.1.4.1.674.10895.2.13.2.1.2 integer read-only
The VLAN identifier.
                                       vlanPortStatus 1.3.6.1.4.1.674.10895.2.13.2.1.3 integer read-write
The status of this port's association within this VLAN. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4.
                                       vlanPortTaggedMode 1.3.6.1.4.1.674.10895.2.13.2.1.4 integer read-write
The tagged mode of a VLAN port. Enumeration: 'untagged': 1, 'tagged': 2.
                         dellPortTrunkGroup 1.3.6.1.4.1.674.10895.2.14
                               portTrunkTable 1.3.6.1.4.1.674.10895.2.14.1 no-access
A list of port trunks and their associated members.
                                   portTrunkEntry 1.3.6.1.4.1.674.10895.2.14.1.1 no-access
A port trunk entry containing the trunk id and trunk members.
                                       portTrunkId 1.3.6.1.4.1.674.10895.2.14.1.1.1 integer read-only
The port trunk identifier. The current range is from 1 to 4.
                                       portTrunkMember 1.3.6.1.4.1.674.10895.2.14.1.1.2 integer read-only
A port trunk has four members.
                                       portTrunkMemberValue 1.3.6.1.4.1.674.10895.2.14.1.1.3 integer read-write
A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member.
           addressIntrusion 1.3.6.1.4.1.6740.0
An addressIntrusion trap signifies that an unauthorized address has been seen on the network.